Created
March 10, 2023 02:28
-
-
Save networkextension/57aa249860a60421ab5c4493d076ea3f to your computer and use it in GitHub Desktop.
lspci.txt
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| root@localhost:~# lspci -vvv -s 0001:01:00.0 | |
| 0001:01:00.0 Network controller: Mellanox Technologies MT27500 Family [ConnectX-3] | |
| Subsystem: Hewlett-Packard Company InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter (Rev Cx) | |
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 32 bytes | |
| Interrupt: pin A routed to IRQ 120 | |
| Region 0: Memory at a040000000 (64-bit, non-prefetchable) [size=1M] | |
| Region 2: Memory at a400000000 (64-bit, prefetchable) [size=32M] | |
| Expansion ROM at a040100000 [disabled] [size=1M] | |
| Capabilities: [40] Power Management version 3 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | |
| Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [48] Vital Product Data | |
| Product Name: HP ConnectX-3 ALOM QSFP | |
| Read-only fields: | |
| [PN] Part number: 649283-B21 | |
| [EC] Engineering changes: D1 | |
| [SN] Serial number: IL231800GH | |
| [V0] Vendor specific: HP IB QDR/EN 10Gb 2P 544FLR-QSFP Adpr | |
| [RV] Reserved: checksum good, 0 byte(s) reserved | |
| Read/write fields: | |
| [V1] Vendor specific: N/A | |
| [YA] Asset tag: N/A | |
| [RW] Read-write area: 100 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 253 byte(s) free | |
| [RW] Read-write area: 252 byte(s) free | |
| End | |
| Capabilities: [9c] MSI-X: Enable+ Count=128 Masked- | |
| Vector table: BAR=0 offset=0007c000 | |
| PBA: BAR=0 offset=0007d000 | |
| Capabilities: [60] Express (v2) Endpoint, MSI 00 | |
| DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited | |
| ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 116.000W | |
| DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset- | |
| MaxPayload 256 bytes, MaxReadReq 256 bytes | |
| DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- | |
| LnkCap: Port #8, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited | |
| ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 8GT/s (ok), Width x8 (ok) | |
| TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | |
| DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, NROPrPrP-, LTR- | |
| 10BitTagComp-, 10BitTagReq-, OBFF Not Supported, ExtFmt-, EETLPPrefix- | |
| EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- | |
| FRS-, TPHComp-, ExtTPHComp- | |
| AtomicOpsCap: 32bit- 64bit- 128bitCAS- | |
| DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled | |
| AtomicOpsCtl: ReqEn- | |
| LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- | |
| Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- | |
| Compliance De-emphasis: -6dB | |
| LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+ | |
| EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest- | |
| Capabilities: [100 v1] Alternative Routing-ID Interpretation (ARI) | |
| ARICap: MFVC- ACS-, Next Function: 0 | |
| ARICtl: MFVC- ACS-, Function Group: 0 | |
| Capabilities: [148 v1] Device Serial Number 24-be-05-ff-ff-96-70-10 | |
| Capabilities: [108 v1] Single Root I/O Virtualization (SR-IOV) | |
| IOVCap: Migration-, Interrupt Message Number: 000 | |
| IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+ | |
| IOVSta: Migration- | |
| Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00 | |
| VF offset: 1, stride: 1, Device ID: 1004 | |
| Supported Page Size: 000007ff, System Page Size: 00000001 | |
| Region 2: Memory at 000000a402000000 (64-bit, prefetchable) | |
| VF Migration: offset: 00000000, BIR: 0 | |
| Capabilities: [154 v2] Advanced Error Reporting | |
| UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
| UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
| UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- | |
| CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- | |
| CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ | |
| AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- | |
| MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- | |
| HeaderLog: 00000000 00000000 00000000 00000000 | |
| Capabilities: [18c v1] Secondary PCI Express | |
| LnkCtl3: LnkEquIntrruptEn-, PerformEqu- | |
| LaneErrStat: 0 | |
| Kernel driver in use: mlx4_core | |
| Kernel modules: mlx4_core | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment