neutronstriker

0. Introduction

Contains some notes about using a Supermicro AOC-STGF-i2S - User's Guide

Initial configuration was:

• The DIP Switch at S1 was all off.
• The NC-SI Header was left unconnected as just fitting in a standard PC PCIe slot.

1. SMBus usage

neutronstriker

1. Go to OpenWRT release page, select the latest release stable release, then targets -> x86 -> 64. Right-click generic-ext4-combined.img.gz (not the "efi"!) and copy the link.

2. On the Proxmox host, download the archive and unpack it:

wget *paste link here*
gunzip openwrt-*.img.gz

3. Resize the image to be the size you want your VM's disk to be (example with 8 GiB):

neutronstriker

import time
errorLogFileName = 'logfile.log'

ferrlog = open(errorLogFileName,'w')

def write2ErrorLog(inputval):
    data = str(inputval)
    timeStamp = time.strftime('%Y-%m-%d,%H:%M:%S')
    if data[0] == '\n':
        print '\n'+timeStamp+' : '+data[1:]+'\n'

neutronstriker

#define F_CPU 8000000UL //8Mhz internal RC oscillator for Tiny45

/*
Program Name: Powerbank_TINY
Author : NeutroN StrikeR aka N.Srinivas
Date : 01-09-2014
Email id:striker.dbz[at]hotmail.com
The software is provided with The MIT License (MIT)
Copyright (c) 2014 N.Srinivas
Permission is hereby granted, free of charge, to any person obtaining a copy

neutronstriker

#define F_CPU 1000000UL

#include<avr/io.h>
#include<util/delay.h>

#define SIPO_PORT B
#define SPIN 3 //PB3
#define STB 4 //PB4
#define CLK 5 //PB5

neutronstriker

#define SIPO PORTB

#define STB PB3
#define SPIN PB4
#define CLK PB5

//Rememeber DDRB |= (1<<STB) | (1<<SPIN) | (1<<CLK); //must be done in main() so as set these pins as output.

void send_nibble(unsigned char x)  //try to make this also inline if necessary
{

neutronstriker

#include <string.h>
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <fcntl.h>
#include <termios.h>

//this program works correctly but please remember to open the serial port as super user or change the permission
//of the port for normal by the following command "sudo chmod 666 /dev/ttyUSB*" the * in here represents the port number
//this command has to be called every time we plug the device in, because everytime the device is plugged in a new file

neutronstriker

#include <windows.h>
#include <stdio.h>

int main()
{
    //windows type variables
	HANDLE	hCom; //Handle variable
	DWORD	rwlen; // read/write length

    char send[32];