Skip to content

Instantly share code, notes, and snippets.

@ngtuna
Created August 4, 2014 05:36
Show Gist options
  • Save ngtuna/2f3065b8d48e462e458c to your computer and use it in GitHub Desktop.
Save ngtuna/2f3065b8d48e462e458c to your computer and use it in GitHub Desktop.
Centos 6.5
Press any key to continue.
Press any key to continue.
Press any key to continue.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-358.2.1.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed Mar 13 00:26:49 UTC 2013
Command line: ro root=/dev/mapper/vg_main-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=uk LANG=en_GB rd_NO_MD console=ttyS0,115200 rd_LVM_LV=vg_main/lv_swap crashkernel=auto rd_LVM_LV=vg_main/lv_root SYSFONT=latarcyrheb-sun16 rd_NO_DM nomodeset
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
Disabled fast string operations
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffd000 (usable)
BIOS-e820: 000000003fffd000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.4 present.
SMBIOS version 2.4 @ 0xFDA20
last_pfn = 0x3fffd max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x0, new 0x7010600070106
init_memory_mapping: 0000000000000000-000000003fffd000
RAMDISK: 3707b000 - 37feffc7
ACPI: RSDP 00000000000fd9f0 00014 (v00 BOCHS )
ACPI: RSDT 000000003fffd630 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 000000003ffffe10 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 000000003fffd910 024A2 (v01 BXPC BXDSDT 00000001 INTL 20090123)
ACPI: FACS 000000003ffffdc0 00040
ACPI: SSDT 000000003fffd870 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 000000003fffd780 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: SSDT 000000003fffd670 0010F (v01 BXPC BXSSDTPC 00000001 INTL 20090123)
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-000000003fffd000
Bootmem setup node 0 0000000000000000-000000003fffd000
NODE_DATA [0000000000009000 - 000000000003cfff]
bootmap [000000000003d000 - 0000000000044fff] pages 8
(7 early reservations) ==> bootmem [0000000000 - 003fffd000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201b0a4] TEXT DATA BSS ==> [0001000000 - 000201b0a4]
#3 [003707b000 - 0037feffc7] RAMDISK ==> [003707b000 - 0037feffc7]
#4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
#5 [000201c000 - 000201c0b9] BRK ==> [000201c000 - 000201c0b9]
#6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff8800000fda40] fda40
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000001 -> 0x0000009b
0: 0x00000100 -> 0x0003fffd
ACPI: PM-Timer IO Port: 0xb008
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bffc0000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880002200000 s94552 r8192 d24232 u2097152
pcpu-alloc: s94552 r8192 d24232 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 258351
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/vg_main-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=uk LANG=en_GB rd_NO_MD console=ttyS0,115200 rd_LVM_LV=vg_main/lv_swap rd_LVM_LV=vg_main/lv_root SYSFONT=latarcyrheb-sun16 rd_NO_DM nomodeset
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 1000868k/1048564k available (5221k kernel code, 408k absent, 47288k reserved, 7121k data, 1264k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:256
Console: colour VGA+ 80x25
console [ttyS0] enabled
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 3392.301 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.60 BogoMIPS (lpj=3392301)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Disabled fast string operations
CPU: CPU feature xsave disabled, no CPUID level 0xd
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
alternatives: switching to unfair spinlock
SMP alternatives: switching to UP code
Freeing SMP alternatives: 35k freed
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21430 entries in 85 pages
x2apic not enabled, IRQ remapping init failed
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Core i7 9xx (Nehalem Class Core i7) stepping 03
Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
Brought up 1 CPUs
Total of 1 processors activated (6784.60 BogoMIPS).
x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource jiffies
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 7 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:01.2: PCI INT D disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15827k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1407123774.092:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1985
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 9DE8DDAC5FF4C00B
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-358.2.1.el6.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2014-08-04 03:42:55 UTC (1407123775)
Initalizing network drop monitor service
Freeing unused kernel memory: 1264k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 904k freed
Freeing unused kernel memory: 1676k freed
/init: 26: Syntax error: "do" unexpected (expecting "done")
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init Not tainted 2.6.32-358.2.1.el6.x86_64 #1
Call Trace:
[<ffffffff8150d248>] ? panic+0xa7/0x16f
[<ffffffff81073ae2>] ? do_exit+0x862/0x870
[<ffffffff81073b48>] ? do_group_exit+0x58/0xd0
[<ffffffff81073bd7>] ? sys_exit_group+0x17/0x20
[<ffffffff8100b072>] ? system_call_fastpath+0x16/0x1b
general protection fault: fff2 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: init Not tainted 2.6.32-358.2.1.el6.x86_64 #1 Red Hat Inc. OpenStack Nova
RIP: 0010:[<ffffffff8150d2ed>] [<ffffffff8150d2ed>] panic+0x14c/0x16f
RSP: 0018:ffff88003f2f5e48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffffffff8179e50c RCX: 0000000000000000
RDX: ffffffff81e2cdbc RSI: 0000000000000000 RDI: 0000000000000046
RBP: ffff88003f2f5eb8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff81aa3140 R14: ffff88003f2f3500 R15: 0000000000000000
FS: 00007f0d0f733700(0000) GS:ffff880002200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f0d0f231ea0 CR3: 0000000001a85000 CR4: 00000000001006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
Process init (pid: 1, threadinfo ffff88003f2f4000, task ffff88003f2f3500)
Stack:
ffff88003f2f3500 0000000000000000 ffff880000000008 ffff88003f2f5ec8
<d> ffff88003f2f5e78 ffffffff81ed6398 ffff88003f2f5eb8 0000000000000000
<d> ffff88003f2ee840 ffff88003f2f3e78 ffff88003f2f3e78 0000000000000000
Call Trace:
[<ffffffff81073ae2>] do_exit+0x862/0x870
[<ffffffff81073b48>] do_group_exit+0x58/0xd0
[<ffffffff81073bd7>] sys_exit_group+0x17/0x20
[<ffffffff8100b072>] system_call_fastpath+0x16/0x1b
Code: e8 59 51 d7 ff 48 8b 45 98 48 8d 5c 03 01 69 05 3e f6 91 00 e8 03 00 00 48 98 48 39 d8 7f ca e8 5a 19 b8 ff fb 66 0f 1f 44 00 00 <31> db e8 0c 39 bd ff 48 89 df ff 15 13 f6 91 00 bf 58 89 41 00
RIP [<ffffffff8150d2ed>] panic+0x14c/0x16f
RSP <ffff88003f2f5e48>
---[ end trace 7ff0fdce52092fa2 ]---
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment