Install PHP7.2 NGINX and PHP7.2-FPM on Ubuntu 16.04

Instructions.sh

########## Install NGINX ##############

# Install software-properties-common package to give us add-apt-repository package
sudo apt-get install -y software-properties-common

# Install latest nginx version from community maintained ppa
sudo add-apt-repository ppa:nginx/stable

# Update packages after adding ppa
sudo apt-get update

# Install nginx
sudo apt-get install -y nginx

# Check status
sudo service nginx status

# Start nginx if it is not already running
sudo service nginx start

# At this point you should have NGINX up and running, open http://localhost on your 
# browser and you should see a welcome page from NGINX

######### Install PHP7.2 and PHP7.2-FPM ################

# check what is the latest PHP version supplied by UBUNTU
sudo apt-cache show php

# You should get something like below where 'Version' would tell us the latest version available in my case is 7.0

# Package: php
# Architecture: all
# Version: 1:7.0+35ubuntu6.1
# Priority: optional
# Section: php
# Source: php-defaults (35ubuntu6.1)
# Origin: Ubuntu
# Maintainer: Ubuntu Developers <[email protected]>
# Original-Maintainer: Debian PHP Maintainers <[email protected]>
# Bugs: https://bugs.launchpad.net/ubuntu/+filebug
# Installed-Size: 11
# Depends: php7.0
# Filename: pool/main/p/php-defaults/php_7.0+35ubuntu6.1_all.deb
# Size: 2862
# MD5sum: c5db88de62d1dcb9679e9ae328d7c94a
# SHA1: 49d3f1d1850ac867fedf6fbc5635c33227dfde53
# SHA256: 0b1ccf22b958163669e677d6f660888eec7951d6eda3ae0f49a8e3409773cd87
# Description: server-side, HTML-embedded scripting language (default)
# Description-md5: b955c03ceec2872c327e77278c943d6a
# Phased-Update-Percentage: 90
# Supported: 5y


# Add Repository which gives us the latest php version 7.2
sudo add-apt-repository ppa:ondrej/php

# Update packages after adding ppa
sudo apt update

# Lets now check what is the latest PHP version available now after the repository is added
sudo apt-cache show php

# You should now get something like below and notice the latest version is changed i.e Version: 1:7.2+60+ubuntu16.04.1+deb.sury.org+1

# Package: php
# Source: php-defaults (60+ubuntu16.04.1+deb.sury.org+1)
# Priority: optional
# Section: php
# Installed-Size: 12
# Maintainer: Debian PHP Maintainers <[email protected]>
# Architecture: all
# Version: 1:7.2+60+ubuntu16.04.1+deb.sury.org+1
# Depends: php7.2
# Filename: pool/main/p/php-defaults/php_7.2+60+ubuntu16.04.1+deb.sury.org+1_all.deb
# Size: 5654
# MD5sum: 1089c40cb9763d667b1ba2bfb0b6b2c4
# SHA1: d34c619a14854708f43ae432daf5fe5e73737072
# SHA256: 6b2b24f7232f980818a688f66fd3f9759ac9d1eb0466dee30faa5b2f4c2b36df
# Description: server-side, HTML-embedded scripting language (default)
# Description-md5: 2ccdfdb6b598dc9bdf5572917b808dcb

# Lets now install php7.2 and some important modules which we will need.

sudo apt-get install php7.2-cli php7.2-fpm php7.2-curl php7.2-gd php7.2-mysql php7.2-mbstring zip unzip

# Some modules require you to authenticate installation and prompt you for some information such as:

# Please select the geographic area in which you live. Subsequent configuration questions will narrow this down by presenting a list
# of cities, representing the time zones in which they are located.

#  1. Africa   3. Antarctica  5. Arctic  7. Atlantic  9. Indian    11. SystemV  13. Etc
#  2. America  4. Australia   6. Asia    8. Europe    10. Pacific  12. US


# Geographic area: 8

# Please select the city or region corresponding to your time zone.

#  1. Amsterdam   9. Brussels     17. Guernsey     25. Lisbon      33. Monaco     41. Rome        49. Stockholm  57. Vienna
#  2. Andorra     10. Bucharest   18. Helsinki     26. Ljubljana   34. Moscow     42. Samara      50. Tallinn    58. Vilnius
#  3. Astrakhan   11. Budapest    19. Isle_of_Man  27. London      35. Nicosia    43. San_Marino  51. Tirane     59. Volgograd
#  4. Athens      12. Busingen    20. Istanbul     28. Luxembourg  36. Oslo       44. Sarajevo    52. Tiraspol   60. Warsaw
#  5. Belfast     13. Chisinau    21. Jersey       29. Madrid      37. Paris      45. Saratov     53. Ulyanovsk  61. Zagreb
#  6. Belgrade    14. Copenhagen  22. Kaliningrad  30. Malta       38. Podgorica  46. Simferopol  54. Uzhgorod   62. Zaporozhye
#  7. Berlin      15. Dublin      23. Kiev         31. Mariehamn   39. Prague     47. Skopje      55. Vaduz      63. Zurich
#  8. Bratislava  16. Gibraltar   24. Kirov        32. Minsk       40. Riga       48. Sofia       56. Vatican

# Time zone: 27

# Once done all basic modules will be installed now, lets check the version now

php -v

# PHP 7.2.2-3+ubuntu16.04.1+deb.sury.org+1 (cli) (built: Feb  6 2018 16:11:23) ( NTS )
# Copyright (c) 1997-2018 The PHP Group
# Zend Engine v3.2.0, Copyright (c) 1998-2018 Zend Technologies
#    with Zend OPcache v7.2.2-3+ubuntu16.04.1+deb.sury.org+1, Copyright (c) 1999-2018, by Zend Technologies


# Lets also check if the PHP7.2-FPM is running, if not start it

sudo service php7.2-fpm status

sudo service php7.2-fpm start  # (if the service isn't running already)

# Now we need to configure the Gateway so that PHP-FPM uses the UNIX socket for executing PHP files.
# For this we need to check where is the PHP7.2-fpm service running from and where are their configurations stored

sudo ps aux | grep php # (this will list php process)

# You will see the output something like below depending on how many processes are running

# root     13122  0.0  0.0 412040 14752 ?        Ss   12:17   0:00 php-fpm: master process (/etc/php/7.2/fpm/php-fpm.conf)
# www-data 13123  0.0  0.0 412040  8424 ?        S    12:17   0:00 php-fpm: pool www
# www-data 13124  0.0  0.0 412040  8424 ?        S    12:17   0:00 php-fpm: pool www
# root     13126  0.0  0.0  11288   868 pts/1    S+   12:17   0:00 grep --color=auto php

# You will see the php-fpm master process is its location as /etc/php/7.2/fpm/php-fpm.conf. We now need to check the socket details
# from the PHP7.2-fpm by view this file.

vim /etc/php/7.2/fpm/php-fpm.conf

# You will see at the end of the file something like 'include=/etc/php/7.2/fpm/pool.d/*.conf' which means this process manager is using configurations from
# the pool.d directory. When viewing the /etc/php/7.2/fpm/pool.d/www.conf you will see that the PHP7.2-fpm (process manager) is 
# listening to the socket at 'listen = /run/php/php7.2-fpm.sock'
# Copy the socket location i.e. /run/php/php7.2-fpm.sock and we will use this socket to tell nginx to use this socket

vim /etc/nginx/site-available/default

# You will need to tell NGINX to process the index.php files as well so replace the following line

# index index.html index.htm index.nginx-debian.html;
# to
# index index.html index.htm index.php;

# Also you will see something like the following block for 'location'

#location ~ \.php$ {
#       include snippets/fastcgi-php.conf;
#
#       # With php-fpm (or other unix sockets):
#       fastcgi_pass unix:/var/run/php/php7.0-fpm.sock;
#       # With php-cgi (or other tcp sockets):
#       fastcgi_pass 127.0.0.1:9000;
#}

# Make changes so to the above block so you have the following one:

location ~ \.php$ {
       include snippets/fastcgi-php.conf;
#
#       # With php-fpm (or other unix sockets):
       fastcgi_pass unix:/run/php/php7.2-fpm.sock;
#       # With php-cgi (or other tcp sockets):
#       fastcgi_pass 127.0.0.1:9000;
}

# Note we have uncommented the location, and fastcgi_pass lines and also pasted the correct socket that
# is used by our php7.2-fpm (process manager)


# lets now restart both nginx and php7.2-fpm

sudo service nginx reload
sudo service php7.2-fpm restart


# Now lets create a index.php file within the document root i.e. root /var/www/html;

touch /var/www/html/index.php

# and put phpinfo() and save it.


# now open http://localhost and you should see the screen with all php informaiton