EnOcean PTM 215Z (Friends of Hue) switch

EnOcean PTM 215Z (Friends of Hue) switch.yaml

blueprint:
  name: Controller - EnOcean PTM 215Z (Friends of Hue) switch
  description: 'Controller automation for executing press/hold/release actions triggered by
    EnOcean PTM 215Z (Friends of Hue) switch.'

  domain: automation
  input: 
    controller_entity:
      name: (Zigbee2MQTT) Controller Entity
      description: The action sensor of the controller to use for the automation.
      default: ''
      selector:
        entity:
          domain: sensor    
    hold_delay:
      name: Hold delay
      description: If the button has been held more than the configured Hold delay, the corresponding held action is triggered.
      default: 500
      selector:
        number:
          min: 100.0
          max: 1000.0
          unit_of_measurement: milliseconds
          mode: box
          step: 10.0                 
    button_1_pressed:
      name: Button 1 Pressed
      description: Action to run, when button 1 is pressed.
      default: []
      selector:
        action: {}
    button_1_held:
      name: Button 1 Held
      description: Action to run, when the button 1 is held.
      default: []
      selector:
        action: {}
    button_1_released:
      name: Button 1 released
      description: Action to run, when the button 1 is released.
      default: []
      selector:
        action: {}         
    button_2_pressed:
      name: Button 2 Pressed
      description: Action to run, when the button 2 pressed.
      default: []
      selector:
        action: {}
    button_2_held:
      name: Button 2 Held
      description: Action to run, when the button 2 is held.
      default: []
      selector:
        action: {}
    button_2_released:
      name: Button 2 released
      description: Action to run, when the button 2 is released.
      default: []
      selector:
        action: {}         
    button_3_pressed:
      name: Button 3 Pressed
      description: Action to run, when the button 3 is pressed.
      default: []
      selector:
        action: {}
    button_3_held:
      name: Button 3 Held
      description: Action to run, when the button 3 is held.
      default: []
      selector:
        action: {}
    button_3_released:
      name: Button 3 released
      description: Action to run, when the button 3 is released.
      default: []
      selector:
        action: {}         
    button_4_pressed:
      name: Button 4 Pressed
      description: Action to run, when the button 4 is pressed.
      default: []
      selector:
        action: {}
    button_4_held:
      name: Button 4 Held
      description: Action to run, when the button 4 is held.
      default: []
      selector:
        action: {}  
    button_4_released:
      name: Button 4 released
      description: Action to run, when the button 4 is released.
      default: []
      selector:
        action: {}          
mode: single
max_exceeded: silent
trigger:
- platform: event
  event_type: state_changed
  event_data:
    entity_id: !input 'controller_entity'
condition: '{{ trigger.event.data.new_state.state not in ["","None"] }}'
action:
- variables:
    trigger_action: '{{ trigger.event.data.new_state.state }}'

- choose:
  - conditions: '{{ "press_" | string in trigger_action }}'
    sequence:
      - wait_for_trigger:
          - platform: state
            entity_id: !input 'controller_entity'
            to: "release_1"
          - platform: state
            entity_id: !input 'controller_entity'
            to: "release_2"      
          - platform: state
            entity_id: !input 'controller_entity'
            to: "release_3"
          - platform: state
            entity_id: !input 'controller_entity'
            to: "release_4"  
        timeout:
          milliseconds: !input 'hold_delay'
      # - choose:
      #   - conditions: '{{ wait.trigger != None }}'
      #     sequence:
      #     - service: logbook.log
      #       data:
      #         name: Button Id
      #         message: '{{ trigger_action }} - press action'          
      #   - conditions: '{{ wait.trigger == None }}'
      #     sequence:
      #     - service: logbook.log
      #       data:
      #         name: Button Id
      #         message: '{{ trigger_action }} - hold action'         
      - choose:
        - conditions: '{{ trigger_action == "press_1" and wait.trigger != None }}'
          sequence: !input 'button_1_pressed'
        - conditions: '{{ trigger_action == "press_2" and wait.trigger != None }}'
          sequence: !input 'button_2_pressed'
        - conditions: '{{ trigger_action == "press_3" and wait.trigger != None }}'
          sequence: !input 'button_3_pressed'
        - conditions: '{{ trigger_action == "press_4" and wait.trigger != None }}'
          sequence: !input 'button_4_pressed'
        - conditions: '{{ trigger_action == "press_1" and wait.trigger == None }}'
          sequence: !input 'button_1_held'
        - conditions: '{{ trigger_action == "press_2" and wait.trigger == None }}'
          sequence: !input 'button_2_held'
        - conditions: '{{ trigger_action == "press_3" and wait.trigger == None }}'
          sequence: !input 'button_3_held'
        - conditions: '{{ trigger_action == "press_4" and wait.trigger == None }}'
          sequence: !input 'button_4_held'

  - conditions: '{{ "release_" | string in trigger_action }}'
    sequence:
      # - service: logbook.log
      #   data:
      #     name: Button Id
      #     message: '{{ trigger_action }} - release action'
      - choose:
        - conditions: '{{ trigger_action == "release_1" }}'
          sequence: !input 'button_1_released'
        - conditions: '{{ trigger_action == "release_2" }}'
          sequence: !input 'button_2_released'
        - conditions: '{{ trigger_action == "release_3" }}'
          sequence: !input 'button_3_released'
        - conditions: '{{ trigger_action == "release_4" }}'
          sequence: !input 'button_4_released'

Excellent. Thank you so much for sharing. If you want more people to be helped, adding Niko to the title will make it searchable for those too.

Question, I am new to HA but have found also with Philips Hue Switch and others that you cannot keep the button down to increase/decrease, but have to release for each step to turn the volume up/ down step by step only and not continyesly. Unlike using HUE. Or is it just me?

Also new in Blueprints: If I wanted to add the additional combinations (1+3, 1+4, 2+3 and 2+4) is it as easy as to just copy paste your commands and replacing with the above combos? They are visible entities.

Thanks again for sharing!

Love it!! 💗
If you some day manage to do double press, it would be awesome.