Skip to content

Instantly share code, notes, and snippets.

@nickludlam

nickludlam/gist:4510674

Created January 11, 2013 13:31
Show Gist options
  • Save nickludlam/4510674 to your computer and use it in GitHub Desktop.
Save nickludlam/4510674 to your computer and use it in GitHub Desktop.
Download ZIP
A dump of the serial console output while booting a Miniand mk803 Android on Arm stick computer
Raw
gistfile1.txt
0x000000bb
00=0x00000000
01=0x00000000
02=0x00000320
03=0x00000180
04=0x000002ee
05=0x00000000
06=0x00000000
07=0x000000bb
08=0x00000000
09=0x00000000
0a=0x00000000
0b=0x00000000
0c=0x00000000
0d=0x00000000
0e=0x00000000
0f=0x00000000
10=0x00000000
11=0x00000000
12=0x00000000
13=0x00000000
14=0x00000018
15=0x00000000
16=0x00000000
17=0x00000000
18=0x00000000
19=0x00000000
1a=0x00000000
1b=0x00000000
1c=0x00000000
1d=0x00000000
1e=0x0000017f
1f=0x00000320
20=0x00000000
21=0x00000000
22=0x00000000
23=0x00000000
24=0x00000000
25=0x00000000
26=0x00000000
27=0x00000000
28=0x00000000
29=0x00000000
2a=0x008x00028d60
Oct 23 201209:33:32
lane00 Success06
lane01 Success06
lane02 Success06
lane03 Success06
Training result:
RSLR0=00000249
RDGR0=000000aa
DLLCR0=00000000
DLLCR1=00000000
DLLCR2=00000000
DLLCR3=00000000
DQTR0=ffffffff
DQTR1=ffffffff
DQTR2=ffffffff
DQTR3=ffffffff
DQSTR=000006db
DQSNTR=000006db
Stage 00 Result 00000000
Stage 01 Result 00000000
Stage 02 Result 00000000
Stage 03 Result 000000000x00000000
0x000000bb
Systemp Started
pages_in_block=0x00000100
0x12345678
ucl decompress
decompress finished
ready
U-Boot 2010.06(m3_mbox_dongle@trunk) (Oct 17 2012 - 21:26:43)
aml_i2c_init 8f8936c0 8f8957c4
DRAM: 1 GiB
unknow ddr type
NAND: Amlogic nand flash uboot driver for M3, Version 1.1 (c) 2010 Amlogic Inc.
No NAND device found!!!
NAND device id: 2c 68 4 4a a9 0
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 4GiB MT29F32G-C)
#####aml_nand_init, with RB pins and chip->chip_delay:20
bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.3ns
oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH30_1K_MODE
Creating 1 MTD partitions on "nandboot":
0x000000000000-0x000000400000 : "nandboot"
nandboot initialized ok
No NAND device found!!!
NAND device id: 2c 68 4 4a a9 0
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 4GiB MT29F32G-C)
1 NAND chips detected
#####aml_nand_init, with RB pins and chip->chip_delay:20
bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.3ns
oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH30_1K_MODE
aml nand env valid addr: 81e000
Creating 8 MTD partitions on "nandmulti":
0x000000c00000-0x000001000000 : "ubootenv"
0x000001000000-0x000002000000 : "aml_logo"
0x000002000000-0x000003000000 : "recovery"
0x000003000000-0x000004400000 : "boot"
0x000004400000-0x000024400000 : "system"
NAND bbt detect factory Bad block at 5a00000
0x000024400000-0x000030400000 : "cache"
0x000030400000-0x000050400000 : "userdata"
0x000050400000-0x000100000000 : "NFTL_Part"
nandmulti initialized ok
MMC: SDIO Port B: 0
In: serial
Out: serial
Err: serial
KGDB: ready
Net: select eth clk-2,source=750000000,out=50000000
Apollo EMAC
Dcache status 1
Icache status 1
HDMI Init
HDMI power on...
Set HDMI:Chip C
upgrade_step = 2
powerkey: 1
AMLOGIC_CHARGING_REBOOT...
logo_display:
buf=osd open 24 1920 1080 1.
osd : 24 (1920,1080) osd1
fill osd with color r(0)g(0)b(0)
chip version=e34c3110, serial:0xC
used Video pll for video out!!
set mode VIC 16 (cd0,cs0,pm1,vd0,22)
param->VIC:16
NAND read: aml_logo offset 0x0, size 0x400000
4194304 bytes read: OK
Begin scale logo...
End scale logo.
1920 1080
GPIOC_14 UPGRADE KEY is 1.
GPIOC_14 UPGRADE KEY is 1.
GPIOC_14 UPGRADE KEY is 1.
get_key(): 1
Normal Start...
efuse version is not selected.
init suspend firmware done. (ret:0)
Hit any key to stop autoboot: 0
NAND read: boot offset 0x0, size 0x800000
8388608 bytes read: OK
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-2.6.34
Image Type: ARM Linux Kernel Image (lzma compressed)
Data Size: 3773430 Bytes = 3.6 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34 (tbc@tbc-desktop) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #34 Fri Oct 26 09:42:05 CST 2012
[ 0.000000] CPU: ARMv7 Processor [412fc094] revision 4 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: AMLOGIC MESON3 8726M SKT SH
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] bankstart=0x8da00000, size=0x12500000
[ 0.000000] bankstart=0xa0000000, size=0x20000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] BUG: mapping for 0x84000000 at 0xc4000000 overlaps vmalloc space
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 220416
[ 0.000000] Kernel command line: rootfstype=ext3 androidboot.resolution=1080p rootwait init=/init console=ttyS0,115200n8 nohlt logo=osd1,0x84100000,loaded,1080p hdmitx=unplug_po
werdown,vdacoff a9_clk=600M clk81=187500000 mem=1024m
[ 0.000000] osd1:1
[ 0.000000] loaded:268435459
[ 0.000000] logo has been loaded
[ 0.000000] 1080p:8
[ 0.000000] HDMI DEBUG: hdmitx_boot_para_setup [1538]
[ 0.000000] (CTS_DDR_CLK) = 528MHz
[ 0.000000] (CTS_MALI_CLK) = 264MHz
[ 0.000000] (CTS_A9_CLK) = 600MHz
[ 0.000000] CLK81(from MSR_CLK_REG) = 187000000MHz, a9_clk(from args) = 187500000
[ 0.000000] set CLK81 to 179MHz
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 64MB 293MB 128MB 384MB = 869MB total
[ 0.000000] Memory: 871088k/871088k available, 18768k reserved, 393216K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0221000 (2148 kB)
[ 0.000000] .text : 0xc0221000 - 0xc09da024 (7909 kB)
[ 0.000000] .data : 0xc09dc000 - 0xc0a26b20 ( 299 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttyS0] enabled
[ 0.236191] Calibrating delay loop... 933.88 BogoMIPS (lpj=4669440)
[ 0.480162] Mount-cache hash table entries: 512
[ 0.482165] Initializing cgroup subsys cpuacct
[ 0.486079] Initializing cgroup subsys freezer
[ 0.490578] CPU: Testing write buffer coherency: ok
[ 0.499058] NET: Registered protocol family 16
[ 0.500647] L2X0 cache controller enabled
[ 0.503740] power hold set high!
[ 0.506951] set_vccx2 power up
[ 0.509979] select eth clk-7,source=50000000,out=50000000
[ 0.615485] SPDIF output.
[ 0.616489] ***m1_init_machine: usb set mode.
[ 0.616893] USB PHY clock souce: XTAL input divided by 2
[ 0.622203] register lm device 0
[ 0.625433] register lm device 1
[ 0.628660] chip version=e34c3110
[ 0.631918] major number 0 for disp
[ 0.635427] register tv module server ok
[ 0.639547] major number 0 for disp
[ 0.643066] register tv module server ok
[ 0.669841] bio: create slab <bio-0> at 0
[ 0.670679] SCSI subsystem initialized
[ 0.672463] usbcore: registered new interface driver usbfs
[ 0.677608] usbcore: registered new interface driver hub
[ 0.682987] usbcore: registered new device driver usb
[ 0.692703] Advanced Linux Sound Architecture Driver Version 1.0.22.1.
[ 0.694804] Bluetooth: Core ver 2.15
[ 0.698077] NET: Registered protocol family 31
[ 0.702296] Bluetooth: HCI device and connection manager initialized
[ 0.708583] Bluetooth: HCI socket layer initialized
[ 0.713655] Switching to clocksource Timer-E
[ 0.718668] NET: Registered protocol family 2
[ 0.722279] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.729778] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.737947] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.743647] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.749290] TCP reno registered
[ 0.752425] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.758227] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.764653] NET: Registered protocol family 1
[ 0.769087] RPC: Registered udp transport module.
[ 0.773487] RPC: Registered tcp transport module.
[ 0.778131] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.819569] highmem bounce pool size: 64 pages
[ 0.819759] ashmem: initialized
[ 0.830002] VFS: Disk quotas dquot_6.5.2
[ 0.830400] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.838736] Slow work thread pool: Starting up
[ 0.839478] Slow work thread pool: Ready
[ 0.843227] NTFS driver 2.1.29 [Flags: R/W].
[ 0.848070] fuse init (API version 7.13)
[ 0.852177] msgmni has been set to 933
[ 0.859037] alg: No test for stdrng (krng)
[ 0.859202] io scheduler noop registered
[ 0.863068] io scheduler deadline registered
[ 0.867664] io scheduler cfq registered (default)
[ 1.147327] brd: module loaded
[ 1.150357] loop: module loaded
[ 1.152754] PPP generic driver version 2.4.2
[ 1.154433] PPP MPPE Compression module registered
[ 1.156964] NET: Registered protocol family 24
[ 1.161524] PPPoL2TP kernel driver, V1.0
[ 1.165574] usbcore: registered new interface driver cdc_acm
[ 1.170980] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.179394] Initializing USB Mass Storage driver...
[ 1.184365] usbcore: registered new interface driver usb-storage
[ 1.190237] USB Mass Storage support registered.
[ 1.194966] usbcore: registered new interface driver usbserial
[ 1.200633] usbserial: USB Serial Driver core
[ 1.204997] USB Serial support registered for GSM modem (1-port)
[ 1.211017] usbcore: registered new interface driver option
[ 1.216463] option: v0.7.2:USB Driver for GSM modems
[ 1.221900] mice: PS/2 mouse device common for all mice
[ 1.227406] -----------install vkeyborad------------
[ 1.232300] input: vkeyboard as /devices/virtual/input/input0
[ 1.237259] vkeyboard_input_dev_open
[ 1.241567] -----------install vkeyborad end------------
[ 1.246496] i2c /dev entries driver
[ 1.249691] Linux video capture interface: v2.00
[ 1.254240] uvc_init amlogic
[ 1.257102] usbcore: registered new interface driver uvcvideo
[ 1.262735] USB Video Class driver (v1.1.0)
[ 1.268367] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[ 1.277561] usbcore: registered new interface driver hiddev
[ 1.280980] usbcore: registered new interface driver usbhid
[ 1.286360] usbhid: USB HID core driver
[ 1.291212] logger: created 64K log 'log_main'
[ 1.294899] logger: created 256K log 'log_events'
[ 1.299551] logger: created 64K log 'log_radio'
[ 1.304187] logger: created 64K log 'log_system'
[ 1.308476] start init vout module
[ 1.312016] create vout attribute ok
[ 1.315769] ge2d_init
[ 1.317984] ge2d_dev major:253
[ 1.321599] ge2d start monitor
[ 1.324347] osd_init
[ 1.326437] [osd0] 0x84100000-0x850fffff
[ 1.330319] ge2d workqueue monitor start
[ 1.334748] Frame buffer memory assigned at phy:0x84100000, vir:0xe9000000, size=16384K
[ 1.342255] ---------------clear framebuffer0 memory size=1000000.
[ 1.367105] [osd1] 0x85100000-0x851fffff
[ 1.367203] Frame buffer memory assigned at phy:0x85100000, vir:0xe8a00000, size=1024K
[ 1.373404] init fbdev bpp is :24
[ 1.377343] osd probe ok
[ 1.379584] vout2_init_module enter
[ 1.383073] start init vout2 module
[ 1.386688] create vout2 attribute ok
[ 1.396123] UART_ttyS0:(irq = 90, address = 0xf81004c0)
[ 1.396174] UART_ttyS1:(irq = 26, address = 0xf11084c0)
[ 1.401072] UART_ttyS2:(irq = 75, address = 0xf11084dc)
[ 1.406202] UART_ttyS3:(irq = 93, address = 0xf1108700)
[ 1.411402] Port 0 = IRQ 90
[ 1.414159] Port 1 = IRQ 26
[ 1.416930] Port 2 = IRQ 75
[ 1.419702] Port 3 = IRQ 93
[ 1.422488] Amlogic nand flash AVOS driver for M3, Version 1.1 (c) 2010 Amlogic Inc.
[ 1.430370] bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.3ns
[ 1.438035] No NAND device found.
[ 1.441249] NAND device id: 2c 68 4 4a a9 0
[ 1.445266] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 4GiB MT29F32G-C)
[ 1.454675] #####aml_nand_init, with RB pins and chip->chip_delay:20
[ 1.460940] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.3ns
[ 1.468038] oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH30_1K_MODE
[ 1.478432] Creating 1 MTD partitions on "C revision NAND 4GiB MT29F32G-C":
[ 1.485292] 0x000000000000-0x000000400000 : "bootloader"
[ 1.492082] bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.3ns
[ 1.498406] No NAND device found.
[ 1.501644] NAND device id: 2c 68 4 4a a9 0
[ 1.505635] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 4GiB MT29F32G-C)
[ 2.074478] 1 NAND chips detected
[ 2.074566] #####aml_nand_init, with RB pins and chip->chip_delay:20
[ 2.078648] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.3ns
[ 2.085770] oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH30_1K_MODE
[ 2.096074] oob layout use nand base oob layout oobsize = 16,oobmul =2,mtd->oobsize =448,aml_chip->oob_size =224
[ 2.116095] aml nand env valid addr: 81e000
[ 2.186613] set nand parts for chip 4096MB
[ 2.186651] nand env: nand_env_probe.
[ 2.189566] set nand parts for chip 4096MB
[ 2.193008] Creating 8 MTD partitions on "C revision NAND 4GiB MT29F32G-C":
[ 2.199897] 0x000000c00000-0x000001000000 : "ubootenv"
[ 2.206177] 0x000001000000-0x000002000000 : "aml_logo"
[ 2.211353] 0x000002000000-0x000003000000 : "recovery"
[ 2.216335] 0x000003000000-0x000004400000 : "boot"
[ 2.221144] 0x000004400000-0x000024400000 : "system"
[ 2.224919] NAND bbt detect factory Bad block at 5a00000
[ 2.231577] 0x000024400000-0x000030400000 : "cache"
[ 2.236367] 0x000030400000-0x000050400000 : "userdata"
[ 2.241593] 0x000050400000-0x000100000000 : "NFTL_Part"
[ 2.667203] nftl initilize completely dev size: 0xa2600000 4
[ 2.668096] avnftl8:
[ 2.670213] nftl release flush cache data: 0
[ 2.674225] dwc_otg: version 2.60a 22-NOV-2006
[ 3.090070] DWC_otg: Using DMA mode
[ 3.090095] dwc_otg lm0: DWC OTG Controller
[ 3.092245] dwc_otg lm0: new USB bus registered, assigned bus number 1
[ 3.098689] dwc_otg lm0: irq 30, io mem 0x00000000
[ 3.103481] DWC_otg: Init: Port Power? op_state=1
[ 3.108099] DWC_otg: Init: Power Port (0)
[ 3.113081] hub 1-0:1.0: USB hub found
[ 3.115827] hub 1-0:1.0: 1 port detected
[ 3.120006] DWC_otg: Shared Tx FIFO mode
[ 3.123772] DWC_otg: Mode Mismatch Interrupt: currently in Host mode
[ 3.550055] DWC_otg: Using DMA mode
[ 3.550079] dwc_otg lm1: DWC OTG Controller
[ 3.552205] dwc_otg lm1: new USB bus registered, assigned bus number 2
[ 3.558677] dwc_otg lm1: irq 31, io mem 0x00000000
[ 3.563455] DWC_otg: Init: Port Power? op_state=1
[ 3.568085] DWC_otg: Init: Power Port (0)
[ 3.572082] set usb b port power on (board gpio 5)!
[ 3.577842] hub 2-0:1.0: USB hub found
[ 3.580718] hub 2-0:1.0: 1 port detected
[ 3.585021] Amlogic A/V streaming port init
[ 3.592251] regist mpeg12 codec profile
[ 3.592567] regist mpeg4 codec profile
[ 3.596233] amvdec_vc1 module init
[ 3.599666] regist vc1 codec profile
[ 3.603208] amvdec_avs module init
[ 3.606617] amvdec_h264 module init
[ 3.610124] regist h264 codec profile
[ 3.613643] amvdec_h264mvc module init
[ 3.617476] regist mjpeg codec profile
[ 3.621110] amvdec_real module init
[ 3.624619] regist real codec profile
[ 3.630718] pdev_id = -1, plat_udelay = 2, plat_timeout = 100
[ 3.634595] aml gpio i2c bus [0] initialized
[ 3.638296] Keypad Driver
[ 3.641567] input: aml_keypad as /devices/platform/m1-kp.0/input/input1
[ 3.648329] remote config major:249
[ 3.651532] physical address:0xa7fde000
[ 3.655907] Memory Card media Major: 253
[ 3.658788] card max_req_size is 128K
[ 3.663139] card creat process sucessful
[ 3.666436] [dsp]DSP start addr 0xc4000000
[ 3.670556] [dsp]register dsp to char divece(232)
[ 3.682484] DSP pcmenc stream buffer to [0xa6401000-0xa6601000]
[ 3.682856] amlogic audio dsp pcmenc device init!
[ 3.688266] amlogic audio spdif interface device init!
[ 3.695781] DSP log stream buffer to [0xa7780000-0xa77fffe0]
[ 3.698273] amlogic audio dsp log device init!
[ 3.702721] <FIQ>:Deinterlace: Init 100us T
[ 3.702728] 0
[ 3.709381] using rtc device, aml_rtc, for alarms
[ 3.713080] aml_rtc aml_rtc: rtc core: registered aml_rtc as rtc0
[ 3.868444] error, the rtc serial communication abnormal, reset the rtc!
[ 3.869625] error: rtc serial communication abnormal!
[ 3.904629] gpio dev major number:242
[ 3.905690] create gpio device success
[ 3.906554] amvdec_viuin module init
[ 3.910424] amvdec_viuin probe start.
[ 3.913743] amvdec_viuin probe end.
[ 3.917851] vdin[0] memory start addr is 89200000, mem_size is f00000 .
[ 3.924026] vdin0: flags:0x0
[ 3.926971] vdin: driver initialized ok
[ 3.930834] efuse===========================================
[ 3.936849] efuse: device efuse created
[ 3.940236] efuse--------------------------------------------
[ 3.947023] HDMI DEBUG: amhdmitx_init [1446]
[ 3.950224] HDMI DEBUG: amhdmitx_probe [1285]
[ 3.955117] hdmin get hdmi platform data
[ 3.958265] HDMI DEBUG: amhdmitx_probe [1357]
[ 3.962683] Set HDMI:Chip C
[ 3.965445] hdmin get brd phy data
[ 3.968739] hdmi phy setting
[ 3.971712] hdmin get brd phy data
[ 3.974976] hdmi phy setting
[ 3.977928] CEC not init
[ 3.982619] amlogic rfkill init
[ 3.983662] BT_RADIO going: on
[ 3.986495] BCM_BT: going ON
[ 3.989572] aml_wdt_init, register platform driver...
[ 3.995148] aml_wdt_probe, driver probe ok
[ 3.998538] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 4.004146] power off hdmi, unmux hpd
[ 4.007701] Hdmi phy suspend
[ 4.010533] HDMI DEBUG: hdmi_task_handle [1016]
[ 4.015201] usbcore: registered new interface driver btusb
[ 4.020526]
[ 4.020533] SD/MMC initialization started......
[ 4.026754] DWC_otg: Mode Mismatch Interrupt: currently in Host mode
[ 4.038671] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 4.040066] android_usb gadget: Number of LUNs=2
[ 4.044651] lun0: LUN: removable file: (no medium)
[ 4.049450] lun1: LUN: removable file: (no medium)
[ 4.055124] android_usb gadget: android_usb ready
[ 4.059783] usbcore: registered new interface driver snd-usb-audio
[ 4.065438] No device for DAI aml-dai0
[ 4.068903] ***Entered sound/soc/aml/aml_m3.c:aml_m3_audio_probe
[ 4.075393] ***Entered sound/soc/aml/aml_m3_codec.c:aml_m3_register
[ 4.110068] usb 2-1: new high speed USB device using dwc_otg and address 2
[ 4.460249] begin SDIO check ......
[ 4.508444] SEND OP timeout @1
[ 4.508671] begin SD&SDHC check ......
[ 4.520471] set type to SDHC
[ 4.700894] Actual delay time in sd_voltage_validation() = 110 ms
[ 4.701436] Change from 2 to SD
[ 4.704553] S18A : 0
[ 4.720438] aml-pcm 0:preallocate_dma_buffer: area=ffc29000, addr=a7740000, size=65536
[ 4.723625] iec958 -3956736: preallocate dma buffer start=00040000, size=c0b0c9a8
[ 4.730733] aml-pcm 1:preallocate_dma_buffer: area=ffc7a000, addr=a7760000, size=65536
[ 4.738137] asoc: AML-M3 <-> aml-dai0 mapping ok
[ 4.742910] ***Entered sound/soc/aml/aml_m3.c:aml_m3_codec_init:
[ 4.748765] dapm: AML_M3_CODEC: configuring unknown pin LINPUT1
[ 4.754637] dapm: AML_M3_CODEC: configuring unknown pin RINPUT1
[ 4.760511] dapm: AML_M3_CODEC: configuring unknown pin HP MIC
[ 4.766284] dapm: AML_M3_CODEC: configuring unknown pin FM IN
[ 4.772521] input: AML-M3 hp_switch as /devices/platform/soc-audio/sound/card0/input2
[ 4.779828] Got RCA = 43690
[ 4.785407]
[ 4.785415] ***********CID*************
[ 4.787854] 03:53:44:53:55:30:32:47:80:03:b3:74:06:00:a1:00:
[ 4.793306] MID[8]=3
[ 4.795644] OID[16]=SD
[ 4.797982] PNM[40]=SU02G
[ 4.800596] PRV[8]=128
[ 4.802920] PSN[32]=0x674b303
[ 4.805865] Reserved[4]=0
[ 4.808463] year[8].month[4]=2010.1
[ 4.811940] NotUsed[1]=0
[ 4.814439] CRC[7]=0
[ 4.814443]
[ 4.818490] ALSA device list:
[ 4.821083] #0: AML-M3 (AML_M3_CODEC)
[ 4.825270] Netfilter messages via NETLINK v0.30.
[ 4.829561] nf_conntrack version 0.5.0 (13610 buckets, 54440 max)
[ 4.836516] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 4.842985] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 4.850833] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 4.857019]
[ 4.857024] ********** CSD v1 **************
[ 4.862709] 00:26:00:32:5f:5a:83:ae:fe:fb:cf:ff:92:80:40:00:
[ 4.868139] CSD_STRUCTURE[2]=0
[ 4.871365] MMC_SPEC_VERS[4]=0
[ 4.874382] Reserved1[2]=0
[ 4.877060] TAAC[8]=38
[ 4.879399] NSAC[8]=0
[ 4.881663] TRAN_SPEED[8]=50
[ 4.884509] CCC[8+4]=1525
[ 4.887107] READ_BL_LEN[4]=10
[ 4.890069] C_SIZE_high[2]=3
[ 4.892911] Reserved2[2]=0
[ 4.895595] READ_BL_PARTIAL[1]=1
[ 4.898799] WRITE_BLK_MISALIGN[1]=0
[ 4.902280] READ_BLK_MISALIGN[1]=0
[ 4.905643] DSR_IMP[1]=0
[ 4.908154] Reserved2[2]=0
[ 4.910850] C_SIZE[2+8+2]=3771
[ 4.913871] VDD_R_CURR_MIN[3]=7
[ 4.916989] VDD_R_CURR_MAX[3]=6
[ 4.920117] VDD_W_CURR_MIN[3]=7
[ 4.923225] VDD_W_CURR_MAX[3]=6
[ 4.926343] C_SIZE_MULT[2+1]=7
[ 4.929375] ERASE_BLK_EN[1]=1
[ 4.932330] SECTOR_SIZE[6+1]=31
[ 4.935438] WP_GRP_SIZE[7]=127
[ 4.938469] Reserved3[2]=0
[ 4.941165] R2W_FACTOR[3]=4
[ 4.943926] WRITE_BL_LEN[2+2]=10
[ 4.947130] WRITE_BL_PARTIAL[1]=0
[ 4.950432] Reserved4[5]=0
[ 4.953107] WP_GRP_ENABLE[1]=1
[ 4.956138] FILE_FORMAT_GRP[1]=0
[ 4.959342] COPY[1]=1
[ 4.961605] PERM_WRITE_PROTECT[1]=0
[ 4.965059] TMP_WRITE_PROTECT[1]=0
[ 4.968437] FILE_FORMAT[2]=0
[ 4.971306] Reserved5[2]=0
[ 4.973980] CRC[7]=0
[ 4.976145] NotUsed[1]=0
[ 4.976150]
[ 4.980818] ctnetlink v0.93: registering with nfnetlink.
[ 4.985651] xt_time: kernel timezone is -0000
[ 4.991799] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.995137] arp_tables: (C) 2002 David S. Miller
[ 4.999689] TCP cubic registered
[ 5.004145] NET: Registered protocol family 10
[ 5.009915] IPv6 over IPv4 tunneling driver
[ 5.013618] NET: Registered protocol family 17
[ 5.015867] NET: Registered protocol family 15
[ 5.020354] Bluetooth: L2CAP ver 2.14
[ 5.023882] Bluetooth: L2CAP socket layer initialized
[ 5.028906] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.033430] Bluetooth: SCO socket layer initialized
[ 5.038476] Bluetooth: RFCOMM TTY layer initialized
[ 5.043185] Bluetooth: RFCOMM socket layer initialized
[ 5.048215] Bluetooth: RFCOMM ver 1.11
[ 5.051960] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.057219] Bluetooth: BNEP filters: protocol multicast
[ 5.062431] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 5.068518] lib80211: common routines for IEEE802.11 drivers
[ 5.074107] enter meson_pm_probe!
[ 5.077249] meson_pm_probe done 0x0 200!
[ 5.081272] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 5.090576] registered taskstats version 1
[ 5.093882] aml_rtc aml_rtc: setting system clock to 1970-01-01 00:00:00 UTC (0)
[ 5.100427] Build the dev/console in kernel mode.
[ 5.105102] init_post.
[ 5.107796] Freeing init memory: 2148K
[ 5.110971] run_init_process /init.
[ 5.114402]
[ 5.114407] ***********SCR*************
[ 5.119666] 02:25:80:00:00:00:00:00:
[ 5.123043] SD_SPEC[4]=2
[ 5.125727] SCR_STRUCTURE[4]=0
[ 5.128758] SD_BUS_WIDTHS[4]=5
[ 5.131804] SD_SECURITY[3]=2
[ 5.134649] DATA_STAT_AFTER_ERASE[1]=0
[ 5.138373] Rsv1[7]=0
[ 5.140638] SD_SPEC3[1]=1
[ 5.143223] CMD_SUPPORT[2]=0
[ 5.146080] Rsv2[6]=0
[ 5.148333] Reserved2[32]=0
[ 5.148337]
[ 5.208478] #SD_ERROR_SWITCH_FUNCTION_COMUNICATION error occured in sd_switch_funtion()
[ 5.210990] sd_mmc_init() is completed successfully!
[ 5.215884] This SD card is working in Wide Bus and Normal Speed mode!
[ 5.215893]
[ 5.226966] cardblksd: cardblksd1 cardblksd2
[ 5.240192] monitor : INSERT
[ 5.251431] UMP: UMP device driver loaded
[ 5.360863] Mali<2>:
[ 5.360894] Mali<2>: Inserting Mali v14 device driver.
[ 5.362796] Mali<2>: Compiled: Aug 22 2012, time: 10:28:35.
[ 5.368339] Mali<2>: Driver revision:
[ 5.380577] Mali<2>: Memory system initializing
[ 5.380615] Mali<2>: Mali OS memory allocator created with max allocation size of 0x14800000 bytes, cpu_usage_adjust 0x00000000
[ 5.400150] Mali<2>: Memory Validator 'Framebuffer' installed for Mali physical address base=0x84000000, size=0x06000000
[ 5.420346] Mali<2>: Mali PP: Creating Mali PP core: Mali-400 PP
[ 5.420805] Mali<2>: Mali PP: Base address of PP core: 0xd0068000
[ 5.426946] Mali<2>: Found Mali GPU Mali-400 MP r1p0
[ 5.435617] Mali<2>: Mali L2 cache: Creating Mali L2 cache: Mali-400 L2 cache
[ 5.438953] Mali<2>: Mali MMU: Creating Mali MMU: Mali-400 MMU for GP
[ 5.460245] Mali<2>: Mali GP: Creating Mali GP core: Mali-400 GP
[ 5.460735] Mali<2>: Mali MMU: Creating Mali MMU: Mali-400 MMU for PP
[ 5.467144] Mali<2>: Mali PP: Creating Mali PP core: Mali-400 PP
[ 5.473201] Mali<2>: Mali PP: Base address of PP core: 0xd0068000
[ 5.501291] Mali: Mali device driver loaded
[ 5.836201] init: command 'loglevel' r=0
[ 5.836295] init: command 'mkdir' r=0
[ 5.838275] init: command 'mkdir' r=0
[ 5.842030] init: command 'mkdir' r=0
[ 5.845545] init: command 'mkdir' r=0
[ 5.849162] init: command 'export' r=0
[ 5.852961] init: command 'export' r=0
[ 5.856606] init: command 'export' r=0
[ 5.860387] init: command 'export' r=0
[ 5.864050] init: command 'export' r=0
[ 5.867773] init: command 'export' r=0
[ 5.871642] init: command 'export' r=0
[ 5.875231] init: command 'export' r=0
[ 5.878948] init: command 'export' r=0
[ 5.882789] init: command 'export' r=0
[ 5.886404] init: command 'export' r=0
[ 5.890252] init: command 'symlink' r=0
[ 5.893985] init: command 'symlink' r=0
[ 5.897795] init: command 'symlink' r=0
[ 5.901682] init: command 'mkdir' r=0
[ 5.905233] init: command 'mkdir' r=0
[ 5.909066] init: command 'mount' r=0
[ 5.912685] init: command 'mkdir' r=0
[ 5.916179] init: command 'symlink' r=0
[ 5.919966] init: command 'mkdir' r=0
[ 5.923689] init: command 'mkdir' r=0
[ 5.927222] init: command 'mkdir' r=0
[ 5.930927] init: command 'mkdir' r=0
[ 5.934603] init: command 'mount' r=0
[ 5.938160] init: command 'mkdir' r=0
[ 5.941957] init: command 'mount' r=0
[ 5.945521] init: command 'write' r=0
[ 5.949110] init: command 'write' r=0
[ 5.952826] init: command 'write' r=0
[ 5.956345] init: command 'write' r=0
[ 5.959969] init: command 'write' r=0
[ 5.963705] init: command 'write' r=0
[ 5.967243] init: command 'write' r=0
[ 5.970958] init: command 'mkdir' r=0
[ 5.974739] init: command 'mount' r=0
[ 5.978169] init: command 'chown' r=0
[ 5.981909] init: command 'chown' r=0
[ 5.985418] init: command 'chmod' r=0
[ 5.989079] init: command 'write' r=-22
[ 5.993085] init: command 'mkdir' r=0
[ 5.996527] init: command 'chown' r=0
[ 6.000227] init: command 'chmod' r=0
[ 6.003813] init: command 'write' r=0
[ 6.007495] init: command 'mkdir' r=0
[ 6.011154] init: command 'chown' r=0
[ 6.014692] init: command 'chmod' r=0
[ 6.018342] init: command 'write' r=0
[ 6.022048] init: command 'chmod' r=-2
[ 6.025688] init: command 'mkdir' r=-2
[ 6.029405] init: command 'chmod' r=-2
[ 6.033182] init: processing action 0x327c0 (fs)
[ 6.037841] init: mtd partition 0, bootloader
[ 6.042122] init: mtd partition 1, ubootenv
[ 6.046206] init: mtd partition 2, aml_logo
[ 6.050418] init: mtd partition 3, recovery
[ 6.054524] init: mtd partition 4, boot
[ 6.058326] init: mtd partition 5, system
[ 6.062357] init: mtd partition 6, cache
[ 6.066208] init: mtd partition 7, userdata
[ 6.070414] init: mtd partition 8, NFTL_Part
[ 6.074736] yaffs: dev is 32505861 name is "mtdblock5" rw
[ 6.079968] yaffs: passed flags ""
[ 6.083586] yaffs2 check point aml nand read data ecc plane0 failed at page 23040 chip 0
[ 6.091683] aml nand read data ecc plane1 failed at page 23040 chip 0
[ 6.176365] failed.
[ 6.179992] NAND bbt detect factory Bad block at 5a00000
[ 19.268436] init: command 'mount' r=0
[ 19.268683] yaffs: dev is 32505863 name is "mtdblock7" rw
[ 19.271988] yaffs: passed flags ""
[ 19.275515] yaffs2 check point failed.
[ 21.951651] init: command 'mount' r=0
[ 21.951838] yaffs: dev is 32505862 name is "mtdblock6" rw
[ 21.955147] yaffs: passed flags ""
[ 21.958620] yaffs2 check point failed.
[ 22.109238] init: command 'mount' r=0
[ 22.109307] init: processing action 0x32878 (post-fs)
[ 22.114405] init: command 'chown' r=0
[ 22.117040] init: command 'chmod' r=0
[ 22.121546] init: command 'chown' r=0
[ 22.124340] init: command 'chmod' r=0
[ 22.127021] init: command 'chown' r=0
[ 22.130715] init: command 'chmod' r=0
[ 22.134261] init: command 'chown' r=0
[ 22.137891] init: command 'chmod' r=0
[ 22.141605] init: command 'chown' r=0
[ 22.145165] init: command 'chmod' r=0
[ 22.153484] init: command 'mkdir' r=0
[ 22.153544] init: processing action 0x32a68 (post-fs-data)
[ 22.159694] init: command 'chown' r=0
[ 22.162617] init: command 'chmod' r=0
[ 22.168572] init: command 'mkdir' r=0
[ 22.168830] init: command 'copy' r=-1
[ 22.172541] init: command 'chown' r=-2
[ 22.176156] init: command 'chmod' r=-2
[ 22.179888] init: command 'copy' r=-1
[ 22.183608] init: command 'chown' r=-2
[ 22.187242] init: command 'chmod' r=-2
[ 22.191053] init: command 'write' r=-2
[ 22.199598] init: command 'mkdir' r=0
[ 22.202220] init: command 'mkdir' r=0
[ 22.207215] init: command 'mkdir' r=0
[ 22.209792] init: command 'mkdir' r=0
[ 22.214612] init: command 'mkdir' r=0
[ 22.217236] init: command 'mkdir' r=0
[ 22.222190] init: command 'mkdir' r=0
[ 22.224805] init: command 'mkdir' r=0
[ 22.230650] init: command 'mkdir' r=0
[ 22.231797] init: command 'chmod' r=0
[ 22.234123] init: command 'chmod' r=0
[ 22.238537] init: command 'chown' r=0
[ 22.241750] init: command 'chown' r=0
[ 22.244719] init: command 'chown' r=0
[ 22.250800] init: command 'mkdir' r=0
[ 22.254225] init: command 'mkdir' r=0
[ 22.258070] init: command 'mkdir' r=0
[ 22.261439] init: command 'mkdir' r=0
[ 22.265342] init: command 'mkdir' r=0
[ 22.268716] init: command 'mkdir' r=0
[ 22.283253] init: command 'chmod' r=0
[ 22.287286] init: command 'mkdir' r=0
[ 22.290826] init: command 'mkdir' r=0
[ 22.291044] init: command 'chmod' r=0
[ 22.292805] BT_RADIO going: off
[ 22.295800] BCM_BT: going OFF
[ 22.298938] init: command 'write' r=0
[ 22.306316] init: command 'mkdir' r=0
[ 22.309747] init: command 'mkdir' r=0
[ 22.313790] init: command 'mkdir' r=0
[ 22.316173] init: command 'mkdir' r=0
[ 22.318028] init: command 'chmod' r=0
[ 22.321789] init: command 'chmod' r=0
[ 22.326653] init: command 'chmod' r=0
[ 22.329824] init: command 'chmod' r=0
[ 22.334101] init: command 'mkdir' r=0
[ 22.339941] init: command 'mkdir' r=0
[ 22.341093] init: command 'chown' r=0
[ 22.343457] init: command 'chmod' r=0
[ 22.351172] init: command 'mkdir' r=0
[ 22.353403] init: command 'mkdir' r=0
[ 22.353668] init: command 'chown' r=0
[ 22.357070] init: command 'chmod' r=0
[ 22.360842] init: command 'chown' r=0
[ 22.364341] init: command 'chmod' r=0
[ 22.367954] init: command 'chown' r=-2
[ 22.371800] init: command 'chmod' r=-2
[ 22.375360] init: command 'mkdir' r=0
[ 22.378964] init: processing action 0x37d68 (property_service_init)
[ 22.391316] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
[ 22.394923] init: command 'property_service_init' r=0
[ 22.399958] init: processing action 0x37db0 (signal_init)
[ 22.405473] init: command 'signal_init' r=0
[ 22.409477] init: processing action 0x37df8 (check_startup)
[ 22.415165] init: command 'check_startup' r=0
[ 22.419367] init: processing action 0x37e40 (ubootenv_init)
[ 22.424962] init: cannot find property:ro.mtd.ubootenv, use 'ubootenv' as default.
[ 22.432575] init: ubootenv device: /dev/nand_env
[ 22.440571] init: ubootenv varible prefix is: ubootenv.var
[ 22.443322] init: Get 12 varibles from /dev/nand_env succeed!
[ 22.448267] init: command 'ubootenv_init' r=0
[ 22.452724] init: processing action 0x33410 (boot)
[ 22.457406] init: command 'setprop' r=0
[ 22.461289] init: command 'setprop' r=0
[ 22.465022] init: command 'setprop' r=0
[ 22.468969] init: command 'chmod' r=0
[ 22.472655] init: command 'chmod' r=0
[ 22.476119] init: command 'chmod' r=0
[ 22.491848] init: command 'mkdir' r=0
[ 22.493053] init: command 'chmod' r=0
[ 22.494673] init: command 'ifup' r=0
[ 22.497308] init: command 'hostname' r=0
[ 22.501288] init: command 'domainname' r=0
[ 22.505154] init: command 'setrlimit' r=0
[ 22.509182] init: command 'setprop' r=0
[ 22.513072] init: command 'setprop' r=0
[ 22.516782] init: command 'setprop' r=0
[ 22.520704] init: command 'write' r=0
[ 22.524243] init: command 'write' r=0
[ 22.527989] init: command 'chown' r=0
[ 22.531622] init: command 'chmod' r=0
[ 22.535183] init: command 'chown' r=0
[ 22.538781] init: command 'chmod' r=0
[ 22.542568] init: command 'write' r=0
[ 22.546068] init: command 'write' r=0
[ 22.549687] init: command 'chown' r=-2
[ 22.553483] init: command 'chown' r=-2
[ 22.557134] init: command 'chown' r=-2
[ 22.560923] init: command 'chown' r=-2
[ 22.564572] init: command 'chown' r=-2
[ 22.568319] init: command 'chown' r=0
[ 22.572030] init: command 'chown' r=0
[ 22.575587] init: command 'chown' r=0
[ 22.579214] init: command 'chmod' r=0
[ 22.582943] init: command 'chmod' r=0
[ 22.586493] init: command 'chmod' r=0
[ 22.590219] init: command 'chown' r=-2
[ 22.593886] init: command 'chown' r=-2
[ 22.597577] init: command 'chown' r=-2
[ 22.601375] init: command 'chown' r=-2
[ 22.605042] init: command 'chown' r=-2
[ 22.608748] init: command 'chown' r=-2
[ 22.612550] init: command 'chown' r=-2
[ 22.616202] init: command 'chown' r=-2
[ 22.619926] init: command 'chown' r=-2
[ 22.623752] init: command 'chown' r=-2
[ 22.627384] init: command 'chown' r=-2
[ 22.631166] init: command 'chown' r=-2
[ 22.634823] init: command 'chown' r=-2
[ 22.638547] init: command 'chown' r=-2
[ 22.642340] init: command 'chown' r=-2
[ 22.645997] init: command 'chown' r=-2
[ 22.649717] init: command 'chown' r=-2
[ 22.653542] init: command 'chown' r=-2
[ 22.657248] init: command 'chown' r=0
[ 22.660961] init: command 'chown' r=0
[ 22.664464] init: command 'chown' r=0
[ 22.668088] init: command 'chown' r=0
[ 22.671828] init: command 'chown' r=0
[ 22.675370] init: command 'chown' r=0
[ 22.679010] init: command 'chown' r=0
[ 22.682764] init: command 'chown' r=0
[ 22.686320] init: command 'chmod' r=0
[ 22.689929] init: command 'chmod' r=0
[ 22.693657] init: command 'chmod' r=0
[ 22.697198] init: command 'chmod' r=0
[ 22.700937] init: command 'chmod' r=0
[ 22.704485] init: command 'chmod' r=0
[ 22.708178] init: command 'chmod' r=0
[ 22.711913] init: command 'chmod' r=0
[ 22.715436] init: command 'chmod' r=0
[ 22.719072] init: command 'chmod' r=0
[ 22.722767] init: command 'chmod' r=0
[ 22.726308] init: command 'chmod' r=0
[ 22.729939] init: command 'chmod' r=0
[ 22.733660] init: command 'chmod' r=0
[ 22.737223] init: command 'chmod' r=0
[ 22.740933] init: command 'chmod' r=0
[ 22.744492] init: command 'chmod' r=0
[ 22.748125] init: command 'chmod' r=0
[ 22.751861] init: command 'chmod' r=0
[ 22.755421] init: command 'chmod' r=0
[ 22.759042] init: command 'chmod' r=0
[ 22.762789] init: command 'chmod' r=0
[ 22.766318] init: command 'chmod' r=0
[ 22.769941] init: command 'chmod' r=0
[ 22.773656] init: command 'chmod' r=-2
[ 22.777325] init: command 'chmod' r=0
[ 22.781054] init: command 'chmod' r=0
[ 22.784598] init: command 'chmod' r=0
[ 22.788228] init: command 'chmod' r=0
[ 22.791943] init: command 'chmod' r=0
[ 22.795526] init: command 'chmod' r=0
[ 22.799144] init: command 'chmod' r=0
[ 22.802876] init: command 'chmod' r=0
[ 22.806433] init: command 'chmod' r=0
[ 22.810120] init: command 'chmod' r=0
[ 22.813693] init: command 'chmod' r=0
[ 22.817318] init: command 'chmod' r=-2
[ 22.821099] init: command 'chmod' r=-2
[ 22.824769] init: command 'chmod' r=-2
[ 22.828477] init: command 'chmod' r=-2
[ 22.832307] init: command 'chmod' r=-2
[ 22.835934] init: command 'chmod' r=-2
[ 22.839653] init: command 'chmod' r=-2
[ 22.843477] init: command 'chmod' r=-2
[ 22.847120] init: command 'chmod' r=-2
[ 22.850914] init: command 'chmod' r=-2
[ 22.854565] init: command 'chmod' r=-2
[ 22.858285] init: command 'chmod' r=-2
[ 22.862077] init: command 'chmod' r=-2
[ 22.865733] init: command 'chmod' r=-2
[ 22.869456] init: command 'chmod' r=-2
[ 22.873271] init: command 'chmod' r=0
[ 22.876817] init: command 'chmod' r=-2
[ 22.880610] init: command 'chmod' r=-2
[ 22.884269] init: command 'chmod' r=-2
[ 22.887983] init: command 'chmod' r=-2
[ 22.891774] init: command 'chmod' r=-2
[ 22.895432] init: command 'chmod' r=-2
[ 22.899152] init: command 'chmod' r=-2
[ 22.902965] init: command 'chmod' r=-2
[ 22.906623] init: command 'chmod' r=-2
[ 22.910412] init: command 'chmod' r=-2
[ 22.914062] init: command 'chmod' r=-2
[ 22.917789] init: command 'chmod' r=-2
[ 22.921578] init: command 'chmod' r=-2
[ 22.925238] init: command 'chmod' r=-2
[ 22.928955] init: command 'chmod' r=-2
[ 22.932771] init: command 'chmod' r=0
[ 22.936341] init: command 'chmod' r=0
[ 22.940117] init: command 'chmod' r=0
[ 22.943656] init: command 'chmod' r=0
[ 22.947308] init: command 'chmod' r=0
[ 22.951021] init: command 'chmod' r=0
[ 22.954627] init: command 'chown' r=0
[ 22.958209] init: command 'chmod' r=0
[ 22.961932] init: command 'chmod' r=0
[ 22.965450] init: command 'chmod' r=0
[ 22.969126] init: command 'chmod' r=0
[ 22.972893] init: command 'chmod' r=0
[ 22.976420] init: command 'chmod' r=0
[ 22.980166] init: command 'chmod' r=0
[ 22.983678] init: command 'chmod' r=0
[ 22.987333] init: command 'chmod' r=0
[ 22.991034] init: command 'chmod' r=0
[ 22.994618] init: command 'chmod' r=0
[ 22.998236] init: command 'chmod' r=0
[ 23.001973] init: command 'chmod' r=0
[ 23.005501] init: command 'chmod' r=0
[ 23.009142] init: command 'chmod' r=0
[ 23.012869] init: command 'chmod' r=0
[ 23.016415] init: command 'chmod' r=0
[ 23.020162] init: command 'chmod' r=0
[ 23.023708] init: command 'chmod' r=0
[ 23.027295] init: command 'chmod' r=0
[ 23.031024] init: command 'chmod' r=0
[ 23.034567] init: command 'chmod' r=0
[ 23.038276] init: command 'write' r=0
[ 23.042021] init: command 'write' r=0
[ 23.045491] init: command 'chmod' r=0
[ 23.049123] CPUFREQ: Per core conservative sysfs interface is deprecated - freq_step
[ 23.056891] init: command 'write' r=0
[ 23.106578] init: command 'chmod' r=0
[ 23.106786] init: command 'chmod' r=0
[ 23.108453] BT_RADIO going: off
[ 23.111515] BCM_BT: going OFF
[ 23.114621] init: command 'write' r=0
[ 23.118172] init: command 'setprop' r=0
[ 23.122051] init: command 'setprop' r=0
[ 23.125731] init: command 'setprop' r=0
[ 23.129546] init: command 'setprop' r=0
[ 23.133431] init: command 'setprop' r=0
[ 23.137180] init: command 'setprop' r=0
[ 23.141044] init: command 'setprop' r=0
[ 23.144751] init: command 'setprop' r=0
[ 23.148677] init: starting 'console'
[ 23.152573] init: running 'console' (pid: 67)
[ 23.156613] init: starting 'display'
[ 23.161023] init: 'console' (pid: 67) started
[ 23.167843] init: running 'display' (pid: 68)
[ 23.168843] init: starting 'servicemanager'
[ 23.173506] init: 'display' (pid: 68) started
[ 23.190568] init: running 'servicemanager' (pid: 69)
[ 23.190829] init: starting 'vold'
[ 23.193681] init: running 'vold' (pid: 70)
[ 23.197646] init: starting 'audio'
[ 23.201596] init: Created socket '/dev/socket/vold' with mode '666', user '0', group '1009'
[ 23.209139] init: 'vold' (pid: 70) started
[ 23.214097] init: 'servicemanager' (pid: 69) started
[ 23.268779] init: running 'audio' (pid: 72)
[ 23.269055] init: starting 'remote_control'
[ 23.273713] init: 'audio' (pid: 72) started
[ 23.280775] init: running 'remote_control' (pid: 74)
[ 23.280925] init: command 'class_start' r=0
[ 23.285084] init: starting 'netd'
[ 23.291749] init: Created socket '/dev/socket/remote_control_service' with mode '666', user '0', group '1000'
[ 23.298122] init: Created socket '/dev/socket/remote_control_sensor' with mode '666', user '0', group '1000'
[ 23.308736] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
[ 23.329466] init: running 'netd' (pid: 75)
[ 23.329791] init: starting 'debuggerd'
[ 23.332073] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
[ 23.340579] init: running 'debuggerd' (pid: 76)
[ 23.344781] init: starting 'surfaceflinger'
[ 23.349819] init: 'surfaceflinger' (pid: 77) started
[ 23.354360] init: 'debuggerd' (pid: 76) started
[ 23.362129] init: Created socket '/dev/socket/remote_control_event' with mode '666', user '0', group '1000'
[ 23.367960] init: 'remote_control' (pid: 74) started
[ 23.373016] init: 'netd' (pid: 75) started
[ 23.380587] init: running 'surfaceflinger' (pid: 77)
[ 23.382031] init: starting 'zygote'
[ 23.386400] init: Created socket '/dev/socket/zygote' with mode '660', user '0', group '1000'
[ 23.393984] init: running 'zygote' (pid: 78)
[ 23.398242] init: starting 'drm'
[ 23.404489] init: 'zygote' (pid: 78) started
[ 23.409714] init: running 'drm' (pid: 79)
[ 23.409990] init: starting 'media'
[ 23.413860] init: 'drm' (pid: 79) started
[ 23.471662] init: running 'media' (pid: 80)
[ 23.471951] init: starting 'dbus'
[ 23.474027] init: running 'dbus' (pid: 81)
[ 23.477876] init: starting 'installd'
[ 23.482367] init: 'media' (pid: 80) started
[ 23.489228] init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'
[ 23.560594] init: 'dbus' (pid: 81) started
[ 23.610922] init: running 'installd' (pid: 84)
[ 23.611535] init: starting 'flash_recovery'
[ 23.651115] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
[ 23.654603] init: 'installd' (pid: 84) started
[ 23.661093] init: 'flash_recovery' (pid: 85) started
root@android:/ # [ 23.690224] init: running 'flash_recovery' (pid: 85)
[ 23.690526] init: starting 'keystore'
[ 23.694367] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
[ 23.701936] init: running 'keystore' (pid: 88)
[ 23.706319] init: starting 'smbd'
[ 23.720929] init: 'smbd' (pid: 89) started
[ 23.827234] init: 'keystore' (pid: 88) started
[ 23.840235] init: running 'smbd' (pid: 89)
[ 23.840473] init: starting 'pppoe_wrapper'
[ 23.843293] init: running 'pppoe_wrapper' (pid: 93)
[ 23.847927] init: starting 'remotecfg'
[ 23.862847] init: 'pppoe_wrapper' (pid: 93) started
[ 24.010630] init: running 'remotecfg' (pid: 97)
[ 24.010793] init: command 'class_start' r=0
[ 24.013901] init: processing action 0x37e88 (queue_propety_triggers)
[ 24.023557] init: 'remotecfg' (pid: 97) started
[ 24.113813] tvmode2 set to null
[ 24.113825]
[ 24.113860] new mode2 null
[ 24.113865] set ok
[ 24.117846] start_clone source is 1080p
[ 24.121741] vf_reg_provider:vdin
[ 24.151094] init: command 'queue_propety_triggers' r=0
[ 24.151270] init: waitpid returned pid 97, status = 00000000
[ 24.156336] init: process 'remotecfg', pid 97 exited
[ 24.190214] viuin_notifier_callback, para = e7c63f00 ,mem_start = 89200000, port = 49152, format = 8, ca-_flag = 0.
[ 24.195103] start viu in decode.
[ 24.198406] 1920x1080 input mode is selected for camera,
[ 24.203840] --vdin_set_all_regs h_active is 1920 v_active is 1080 frame_rate is 300
[ 24.261401] init: waitpid returned pid 72, status = 00000200
[ 24.261539] init: process 'audio', pid 72 exited
[ 24.266216] init: processing action 0x34f28 (nonencrypted)
[ 24.365842] init: command 'class_start' r=0
[ 24.365958] init: processing action 0x358b0 (property:persist.sys.usb.config=*)
[ 24.417169] start_clone: source 1920x1080
[ 24.417452] tvmode2 set to 480cvbs
[ 24.417464]
[ 24.440347] init: command 'setprop' r=0
[ 24.440445] init: command 'class_start' r=0
[ 24.442822] init: processing action 0x353f0 (property:sys.usb.config=mass_storage)
[ 24.463978] new mode2 480cvbs
[ 24.463983] set ok
[ 24.464034] vf_unreg_provider:vdin
[ 24.466963] stop viu_in decode.
[ 24.470267] start_clone source is 1080p
[ 24.473972] vf_reg_provider:vdin
[ 24.511655] nftl creat stucture completely free blk: 5 erased blk: 1396
[ 24.552170] android_usb: already disabled
[ 24.552242] init: command 'write' r=0
[ 24.554447] init: command 'write' r=0
[ 24.558049] init: command 'write' r=0
[ 24.602334] viuin_notifier_callback, para = e7c63f00 ,mem_start = 89200000, port = 49152, format = 8, ca-_flag = 0.
[ 24.607219] start viu in decode.
[ 24.610551] 1920x1080 input mode is selected for camera,
[ 24.615888] --vdin_set_all_regs h_active is 1920 v_active is 1080 frame_rate is 300
[ 24.660576] init: command 'write' r=0
[ 24.660772] DWC_otg: Mode Mismatch Interrupt: currently in Host mode
[ 24.665065] init: command 'write' r=0
[ 24.668793] init: command 'setprop' r=0
[ 24.802115] start_clone: source 1920x1080
[ 25.399259] osd0=>x:0 ,y:0,w:1280,h:720
[ 25.399267] osd1=> x:0,y:0,w:18,h:18
[ 26.174269] tvmode set to 1080p
[ 26.174281]
[ 26.174316] don't set the same mode as current.
[ 26.527160] Mali<2>: Session starting
[ 26.573856] init: starting 'bootanim'
[ 26.574330] init: running 'bootanim' (pid: 144)
[ 26.581722] init: 'bootanim' (pid: 144) started
[ 26.979500] init: waitpid returned pid 85, status = 00000000
[ 26.979642] init: process 'flash_recovery', pid 85 exited
[ 27.441662] Mali<2>: Session starting
[ 27.868626] ***Entered sound/soc/aml/aml_dai.c:aml_dai_hw_params
[ 27.869218] I2S hw init,i2s mode 0
[ 27.872559] iec958 mode PCM16
[ 27.875461] IEC958 16bit
[ 27.877927] iec958 nodify hdmi audio type 1
[ 27.882116] audio info changed.notify to hdmi: type 1,sr 48000
[ 27.920216] HDMI: aout notify rate 48000
[ 27.920245] HDMI: aout notify format PCM
[ 27.922602] aml_m3_codec_mute mute=0
[ 28.201291] osd0 free scale ENABLE
[ 28.201334] vf_reg_provider:osd
[ 28.224105] osd1 free scale ENABLE
[ 28.240054] <FIQ>:vpts to scr, apts = 0xffffffff, vpts <FIQ>:vf_ext_light_unreg_provide
[ 28.240072] 0
[ 28.278161] buf=0
[ 28.278171]
[ 28.278194] IEC958_mode_raw=0
[ 28.324828] init: waitpid returned pid 68, status = 00000000
[ 28.324962] init: process 'display', pid 68 exited
[ 30.171915] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[ 30.397074] error, the rtc serial communication abnormal, reset the rtc!
[ 30.397239] error: rtc serial communication abnormal!
[ 33.060129] Headphone unpluged
[ 36.843655] request_suspend_state: wakeup (3->0) at 36615952004 (1970-01-02 00:00:06.595917001 UTC)
[ 37.785150] acc_open
[ 37.785196] acc_release
[ 38.145989] cfg80211: Calling CRDA to update world regulatory domain
[ 38.732945] init: processing action 0x379b0 (property:dev.bootcomplete=1)
[ 38.734261] init: command 'chmod' r=0
[ 38.737949] init: command 'chmod' r=0
[ 38.780398] init: command 'chmod' r=-2
[ 38.780524] init: command 'write' r=-2
[ 38.780686] init: cannot find '/system/bin/usbtestpm', disabling 'usbpm'
[ 38.780710] init: command 'start' r=0
[ 40.608589] rtw driver version=v3.4.2_3727.20120404
[ 40.608639] Build at: Jul 5 2012 17:09:05
[ 40.612165] ##########rtw_suspend_lock_init ###########
[ 40.617605] register rtw_netdev_ops to netdev_ops
[ 40.622036] rtw_wdev_alloc
[ 40.626456] CHIP TYPE: RTL8188C_8192C
[ 40.626482]
[ 40.626486] usb_endpoint_descriptor(0):
[ 40.626494] bLength=7
[ 40.626499] bDescriptorType=5
[ 40.626515] bEndpointAddress=81
[ 40.626521] wMaxPacketSize=200
[ 40.626528] bInterval=0
[ 40.626534] RT_usb_endpoint_is_bulk_in = 1
[ 40.626541]
[ 40.626545] usb_endpoint_descriptor(1):
[ 40.626551] bLength=7
[ 40.626556] bDescriptorType=5
[ 40.626562] bEndpointAddress=2
[ 40.626568] wMaxPacketSize=200
[ 40.626574] bInterval=0
[ 40.626581] RT_usb_endpoint_is_bulk_out = 2
[ 40.626588]
[ 40.626591] usb_endpoint_descriptor(2):
[ 40.626598] bLength=7
[ 40.626603] bDescriptorType=5
[ 40.626609] bEndpointAddress=3
[ 40.626615] wMaxPacketSize=200
[ 40.626621] bInterval=0
[ 40.626633] RT_usb_endpoint_is_bulk_out = 3
[ 40.626641]
[ 40.626644] usb_endpoint_descriptor(3):
[ 40.626651] bLength=7
[ 40.626656] bDescriptorType=5
[ 40.626662] bEndpointAddress=84
[ 40.626668] wMaxPacketSize=40
[ 40.626674] bInterval=1
[ 40.626682] RT_usb_endpoint_is_int_in = 4, Interval = 1
[ 40.626692] nr_endpoint=4, in_num=2, out_num=2
[ 40.626698]
[ 40.626703] USB_SPEED_HIGH
[ 40.626855] Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_B_CUT.
[ 40.626870] RF_Type is 3!!
[ 40.627299] EEPROM type is E-FUSE
[ 40.627309] ====> ReadAdapterInfo8192C
[ 40.627448] Boot from EFUSE, Autoload OK !
[ 41.134357] EEPROMVID = 0x0bda
[ 41.134396] EEPROMPID = 0x8176
[ 41.134910] EEPROMCustomerID : 0x00
[ 41.138392] EEPROMSubCustomerID: 0x00
[ 41.142075] RT_CustomerID: 0x00
[ 41.145139] _ReadMACAddress MAC Address from EFUSE = 00:92:c3:e1:72:c6
[ 41.151683] EEPROMRegulatory = 0x0
[ 41.155005] _ReadBoardType(0)
[ 41.157951] BT Coexistance = disable
[ 41.161516] RT_ChannelPlan: 0x0a
[ 41.164723] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(10) ,bSupportRemoteWakeup(1)
[ 41.172865] ### PS params=> power_mgnt(1),usbss_enable(0) ###
[ 41.178649] ### AntDivCfg(0)
[ 41.181554] readAdapterInfo_8192CU(): REPLACEMENT = 0
[ 41.186535] <==== ReadAdapterInfo8192C in 450 ms
[ 41.561913] rtw_register_early_suspend
[ 41.561969]
[ 41.561974] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
[ 41.567431]
[ 41.567436] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
[ 41.575071] rtw_macaddr_cfg MAC Address = 00:92:c3:e1:72:c6
[ 41.580645] MAC Address from pnetdev->dev_addr= 00:92:c3:e1:72:c6
[ 41.802988] cfg80211_rtw_set_power_mgmt
[ 41.831353] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
[ 41.837548] usbcore: registered new interface driver rtl8192cu
[ 42.093539] init: starting 'wpa_supplicant'
[ 42.094000] init: running 'wpa_supplicant' (pid: 344)
[ 42.110884] init: Created socket '/dev/socket/wpa_wlan0' with mode '666', user '1000', group '1010'
[ 42.114497] init: 'wpa_supplicant' (pid: 344) started
[ 43.713423] +871x_drv - drv_open, bup=0
[ 43.742260] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B
[ 43.743092] FirmwareDownload92C accquire FW from embedded image
[ 43.748965] fw_ver=v80, fw_subver=0, sig=0x88c0
[ 43.879996] fw download ok!
[ 43.880096] Set RF Chip ID to RF_6052 and RF type to 1T1R.
[ 44.319325] IQK:Start!!!
[ 44.340818] Path A IQK Success!!
[ 44.348695] Path A IQK Success!!
[ 44.353457] IQK: final_candidate is 0
[ 44.353493] IQK: RegE94=104 RegE9C=14 RegEA4=fe RegEAC=4 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
[ 44.353504] Path A IQ Calibration Success !
[ 44.548835] pdmpriv->TxPowerTrackControl = 1
[ 44.553831] MAC Address from REG_MACID = 00:92:c3:e1:72:c6
[ 44.553872] rtl8192cu_hal_init in 840ms
[ 44.557606] MAC Address = 00:92:c3:e1:72:c6
[ 44.592340] rtw_cfg80211_init_wiphy:rf_type=3
[ 44.592389] -871x_drv - drv_open, bup=1
[ 44.598625] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 44.598701] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[ 44.598769] set_mode = IW_MODE_INFRA
[ 44.620818] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[ 44.830928]
[ 44.830935] ======== Set channel_plan = 0x05 ========
[ 46.178364] survey done event(2d)
[ 46.178541] rtw_cfg80211_indicate_scan_done without scan req
[ 46.730060] ==>pwr_state_check_handler .fw_state(8)
[ 46.730103] ==> rtw_ps_cmd , enqueue CMD
[ 46.733543] ==>rtw_ps_processor .fw_state(8)
[ 46.737764] ==>ips_enter cnts:1
[ 46.757246] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00020800)....
[ 46.757259]
[ 46.760572] ===> rtw_ips_pwr_down...................
[ 46.797079] ====> rtw_ips_dev_unload...
[ 46.828916] usb_read_port_cancel
[ 46.873297] usb_write_port_cancel
[ 46.873453] ==> rtl8192cu_hal_deinit
[ 46.874802] bkeepfwalive(0)
[ 46.877572] card disble without HWSM...........
[ 46.958099] <=== rtw_ips_pwr_down..................... in 190ms
[ 46.985254] Mali<2>: Session starting
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment