Last active
May 17, 2024 11:51
-
-
Save nico-lab/a194592124e7f505e1028a4cc88b75cc to your computer and use it in GitHub Desktop.
ffmpeg -h encoder=av1_nvenc
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Encoder av1_nvenc [NVIDIA NVENC av1 encoder]: | |
| General capabilities: dr1 delay hardware | |
| Threading capabilities: none | |
| Supported hardware devices: cuda cuda d3d11va d3d11va | |
| Supported pixel formats: yuv420p nv12 p010le yuv444p p016le yuv444p16le bgr0 bgra rgb0 rgba x2rgb10le x2bgr10le gbrp gbrp16le cuda d3d11 | |
| av1_nvenc AVOptions: | |
| -preset <int> E..V....... Set the encoding preset (from 0 to 18) (default p4) | |
| default 0 E..V....... | |
| slow 1 E..V....... hq 2 passes | |
| medium 2 E..V....... hq 1 pass | |
| fast 3 E..V....... hp 1 pass | |
| p1 12 E..V....... fastest (lowest quality) | |
| p2 13 E..V....... faster (lower quality) | |
| p3 14 E..V....... fast (low quality) | |
| p4 15 E..V....... medium (default) | |
| p5 16 E..V....... slow (good quality) | |
| p6 17 E..V....... slower (better quality) | |
| p7 18 E..V....... slowest (best quality) | |
| -tune <int> E..V....... Set the encoding tuning info (from 1 to 4) (default hq) | |
| hq 1 E..V....... High quality | |
| ll 2 E..V....... Low latency | |
| ull 3 E..V....... Ultra low latency | |
| lossless 4 E..V....... Lossless | |
| -level <int> E..V....... Set the encoding level restriction (from 0 to 24) (default auto) | |
| auto 24 E..V....... | |
| 2 0 E..V....... | |
| 2.0 0 E..V....... | |
| 2.1 1 E..V....... | |
| 2.2 2 E..V....... | |
| 2.3 3 E..V....... | |
| 3 4 E..V....... | |
| 3.0 4 E..V....... | |
| 3.1 5 E..V....... | |
| 3.2 6 E..V....... | |
| 3.3 7 E..V....... | |
| 4 8 E..V....... | |
| 4.0 8 E..V....... | |
| 4.1 9 E..V....... | |
| 4.2 10 E..V....... | |
| 4.3 11 E..V....... | |
| 5 12 E..V....... | |
| 5.0 12 E..V....... | |
| 5.1 13 E..V....... | |
| 5.2 14 E..V....... | |
| 5.3 15 E..V....... | |
| 6 16 E..V....... | |
| 6.0 16 E..V....... | |
| 6.1 17 E..V....... | |
| 6.2 18 E..V....... | |
| 6.3 19 E..V....... | |
| 7 20 E..V....... | |
| 7.0 20 E..V....... | |
| 7.1 21 E..V....... | |
| 7.2 22 E..V....... | |
| 7.3 23 E..V....... | |
| -tier <int> E..V....... Set the encoding tier (from 0 to 1) (default 0) | |
| 0 0 E..V....... | |
| 1 1 E..V....... | |
| -rc <int> E..V....... Override the preset rate-control (from -1 to INT_MAX) (default -1) | |
| constqp 0 E..V....... Constant QP mode | |
| vbr 1 E..V....... Variable bitrate mode | |
| cbr 2 E..V....... Constant bitrate mode | |
| -multipass <int> E..V....... Set the multipass encoding (from 0 to 2) (default disabled) | |
| disabled 0 E..V....... Single Pass | |
| qres 1 E..V....... Two Pass encoding is enabled where first Pass is quarter resolution | |
| fullres 2 E..V....... Two Pass encoding is enabled where first Pass is full resolution | |
| -highbitdepth <boolean> E..V....... Enable 10 bit encode for 8 bit input (default false) | |
| -tile-rows <int> E..V....... Number of tile rows to encode with (from -1 to 64) (default -1) | |
| -tile-columns <int> E..V....... Number of tile columns to encode with (from -1 to 64) (default -1) | |
| -surfaces <int> E..V....... Number of concurrent surfaces (from 0 to 64) (default 0) | |
| -gpu <int> E..V....... Selects which NVENC capable GPU to use. First GPU is 0, second is 1, and so on. (from -2 to INT_MAX) (default any) | |
| any -1 E..V....... Pick the first device available | |
| list -2 E..V....... List the available devices | |
| -rgb_mode <int> E..V....... Configure how nvenc handles packed RGB input. (from 0 to INT_MAX) (default yuv420) | |
| yuv420 1 E..V....... Convert to yuv420 | |
| yuv444 2 E..V....... Convert to yuv444 | |
| disabled 0 E..V....... Disables support, throws an error. | |
| -delay <int> E..V....... Delay frame output by the given amount of frames (from 0 to INT_MAX) (default INT_MAX) | |
| -rc-lookahead <int> E..V....... Number of frames to look ahead for rate-control (from 0 to INT_MAX) (default 0) | |
| -cq <float> E..V....... Set target quality level (0 to 51, 0 means automatic) for constant quality mode in VBR rate control (from 0 to 51) (default 0) | |
| -init_qpP <int> E..V....... Initial QP value for P frame (from -1 to 255) (default -1) | |
| -init_qpB <int> E..V....... Initial QP value for B frame (from -1 to 255) (default -1) | |
| -init_qpI <int> E..V....... Initial QP value for I frame (from -1 to 255) (default -1) | |
| -qp <int> E..V....... Constant quantization parameter rate control method (from -1 to 255) (default -1) | |
| -qp_cb_offset <int> E..V....... Quantization parameter offset for cb channel (from -12 to 12) (default 0) | |
| -qp_cr_offset <int> E..V....... Quantization parameter offset for cr channel (from -12 to 12) (default 0) | |
| -no-scenecut <boolean> E..V....... When lookahead is enabled, set this to 1 to disable adaptive I-frame insertion at scene cuts (default false) | |
| -forced-idr <boolean> E..V....... If forcing keyframes, force them as IDR frames. (default false) | |
| -b_adapt <boolean> E..V....... When lookahead is enabled, set this to 0 to disable adaptive B-frame decision (default true) | |
| -spatial-aq <boolean> E..V....... set to 1 to enable Spatial AQ (default false) | |
| -temporal-aq <boolean> E..V....... set to 1 to enable Temporal AQ (default false) | |
| -zerolatency <boolean> E..V....... Set 1 to indicate zero latency operation (no reordering delay) (default false) | |
| -nonref_p <boolean> E..V....... Set this to 1 to enable automatic insertion of non-reference P-frames (default false) | |
| -strict_gop <boolean> E..V....... Set 1 to minimize GOP-to-GOP rate fluctuations (default false) | |
| -aq-strength <int> E..V....... When Spatial AQ is enabled, this field is used to specify AQ strength. AQ strength scale is from 1 (low) - 15 (aggressive) (from 1 to 15) (default 8) | |
| -weighted_pred <boolean> E..V....... Enable weighted prediction (default false) | |
| -b_ref_mode <int> E..V....... Use B frames as references (from -1 to 2) (default -1) | |
| disabled 0 E..V....... B frames will not be used for reference | |
| each 1 E..V....... Each B frame will be used for reference | |
| middle 2 E..V....... Only (number of B frames)/2 will be used for reference | |
| -dpb_size <int> E..V....... Specifies the DPB size used for encoding (0 means automatic) (from 0 to INT_MAX) (default 0) | |
| -ldkfs <int> E..V....... Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR (from 0 to 255) (default 0) | |
| -intra-refresh <boolean> E..V....... Use Periodic Intra Refresh instead of IDR frames (default false) | |
| -timing-info <boolean> E..V....... Include timing info in sequence/frame headers (default false) | |
| -extra_sei <boolean> E..V....... Pass on extra SEI data (e.g. a53 cc) to be included in the bitstream (default true) | |
| -a53cc <boolean> E..V....... Use A53 Closed Captions (if available) (default true) | |
| -s12m_tc <boolean> E..V....... Use timecode (if available) (default true) | |
| -lookahead_level <int> E..V....... Specifies the lookahead level. Higher level may improve quality at the expense of performance. (from -1 to 15) (default -1) | |
| auto 15 E..V....... | |
| 0 0 E..V....... | |
| 1 1 E..V....... | |
| 2 2 E..V....... | |
| 3 3 E..V....... | |
| -split_encode_mode <int> E..V....... Specifies the split encoding mode (from 0 to 15) (default auto) | |
| disabled 15 E..V....... Disabled for all configurations | |
| auto 0 E..V....... Enabled or disabled depending on the preset and tuning info | |
| forced 1 E..V....... Enabled with number of horizontal strips selected by the driver | |
| 2 2 E..V....... Enabled with number of horizontal strips forced to 2 when number of NVENCs > 1 | |
| 3 3 E..V....... Enabled with number of horizontal strips forced to 3 when number of NVENCs > 2 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment