Last active
October 3, 2024 06:43
-
-
Save nico-lab/e1ba48c33bf2c7e1d9ffdd9c1b8d0493 to your computer and use it in GitHub Desktop.
ffmpeg -h encoder=h264_nvenc
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Encoder h264_nvenc [NVIDIA NVENC H.264 encoder]: | |
| General capabilities: dr1 delay hardware | |
| Threading capabilities: none | |
| Supported hardware devices: cuda cuda d3d11va d3d11va | |
| Supported pixel formats: yuv420p nv12 p010le yuv444p p016le yuv444p16le bgr0 bgra rgb0 rgba x2rgb10le x2bgr10le gbrp gbrp16le cuda d3d11 | |
| h264_nvenc AVOptions: | |
| -preset <int> E..V....... Set the encoding preset (from 0 to 18) (default p4) | |
| default 0 E..V....... | |
| slow 1 E..V....... hq 2 passes | |
| medium 2 E..V....... hq 1 pass | |
| fast 3 E..V....... hp 1 pass | |
| hp 4 E..V....... | |
| hq 5 E..V....... | |
| bd 6 E..V....... | |
| ll 7 E..V....... low latency | |
| llhq 8 E..V....... low latency hq | |
| llhp 9 E..V....... low latency hp | |
| lossless 10 E..V....... | |
| losslesshp 11 E..V....... | |
| p1 12 E..V....... fastest (lowest quality) | |
| p2 13 E..V....... faster (lower quality) | |
| p3 14 E..V....... fast (low quality) | |
| p4 15 E..V....... medium (default) | |
| p5 16 E..V....... slow (good quality) | |
| p6 17 E..V....... slower (better quality) | |
| p7 18 E..V....... slowest (best quality) | |
| -tune <int> E..V....... Set the encoding tuning info (from 1 to 4) (default hq) | |
| hq 1 E..V....... High quality | |
| ll 2 E..V....... Low latency | |
| ull 3 E..V....... Ultra low latency | |
| lossless 4 E..V....... Lossless | |
| -profile <int> E..V....... Set the encoding profile (from 0 to 3) (default main) | |
| baseline 0 E..V....... | |
| main 1 E..V....... | |
| high 2 E..V....... | |
| high444p 3 E..V....... | |
| -level <int> E..V....... Set the encoding level restriction (from 0 to 62) (default auto) | |
| auto 0 E..V....... | |
| 1 10 E..V....... | |
| 1.0 10 E..V....... | |
| 1b 9 E..V....... | |
| 1.0b 9 E..V....... | |
| 1.1 11 E..V....... | |
| 1.2 12 E..V....... | |
| 1.3 13 E..V....... | |
| 2 20 E..V....... | |
| 2.0 20 E..V....... | |
| 2.1 21 E..V....... | |
| 2.2 22 E..V....... | |
| 3 30 E..V....... | |
| 3.0 30 E..V....... | |
| 3.1 31 E..V....... | |
| 3.2 32 E..V....... | |
| 4 40 E..V....... | |
| 4.0 40 E..V....... | |
| 4.1 41 E..V....... | |
| 4.2 42 E..V....... | |
| 5 50 E..V....... | |
| 5.0 50 E..V....... | |
| 5.1 51 E..V....... | |
| 5.2 52 E..V....... | |
| 6.0 60 E..V....... | |
| 6.1 61 E..V....... | |
| 6.2 62 E..V....... | |
| -rc <int> E..V....... Override the preset rate-control (from -1 to INT_MAX) (default -1) | |
| constqp 0 E..V....... Constant QP mode | |
| vbr 1 E..V....... Variable bitrate mode | |
| cbr 2 E..V....... Constant bitrate mode | |
| vbr_minqp 8388609 E..V....... Variable bitrate mode with MinQP (deprecated) | |
| ll_2pass_quality 8388609 E..V....... Multi-pass optimized for image quality (deprecated) | |
| ll_2pass_size 8388610 E..V....... Multi-pass optimized for constant frame size (deprecated) | |
| vbr_2pass 8388609 E..V....... Multi-pass variable bitrate mode (deprecated) | |
| cbr_ld_hq 8388610 E..V....... Constant bitrate low delay high quality mode | |
| cbr_hq 8388610 E..V....... Constant bitrate high quality mode | |
| vbr_hq 8388609 E..V....... Variable bitrate high quality mode | |
| -rc-lookahead <int> E..V....... Number of frames to look ahead for rate-control (from 0 to INT_MAX) (default 0) | |
| -surfaces <int> E..V....... Number of concurrent surfaces (from 0 to 64) (default 0) | |
| -cbr <boolean> E..V....... Use cbr encoding mode (default false) | |
| -2pass <boolean> E..V....... Use 2pass encoding mode (default auto) | |
| -gpu <int> E..V....... Selects which NVENC capable GPU to use. First GPU is 0, second is 1, and so on. (from -2 to INT_MAX) (default any) | |
| any -1 E..V....... Pick the first device available | |
| list -2 E..V....... List the available devices | |
| -rgb_mode <int> E..V....... Configure how nvenc handles packed RGB input. (from 0 to INT_MAX) (default yuv420) | |
| yuv420 1 E..V....... Convert to yuv420 | |
| yuv444 2 E..V....... Convert to yuv444 | |
| disabled 0 E..V....... Disables support, throws an error. | |
| -delay <int> E..V....... Delay frame output by the given amount of frames (from 0 to INT_MAX) (default INT_MAX) | |
| -no-scenecut <boolean> E..V....... When lookahead is enabled, set this to 1 to disable adaptive I-frame insertion at scene cuts (default false) | |
| -forced-idr <boolean> E..V....... If forcing keyframes, force them as IDR frames. (default false) | |
| -b_adapt <boolean> E..V....... When lookahead is enabled, set this to 0 to disable adaptive B-frame decision (default true) | |
| -spatial-aq <boolean> E..V....... set to 1 to enable Spatial AQ (default false) | |
| -spatial_aq <boolean> E..V....... set to 1 to enable Spatial AQ (default false) | |
| -temporal-aq <boolean> E..V....... set to 1 to enable Temporal AQ (default false) | |
| -temporal_aq <boolean> E..V....... set to 1 to enable Temporal AQ (default false) | |
| -zerolatency <boolean> E..V....... Set 1 to indicate zero latency operation (no reordering delay) (default false) | |
| -nonref_p <boolean> E..V....... Set this to 1 to enable automatic insertion of non-reference P-frames (default false) | |
| -strict_gop <boolean> E..V....... Set 1 to minimize GOP-to-GOP rate fluctuations (default false) | |
| -aq-strength <int> E..V....... When Spatial AQ is enabled, this field is used to specify AQ strength. AQ strength scale is from 1 (low) - 15 (aggressive) (from 1 to 15) (default 8) | |
| -cq <float> E..V....... Set target quality level (0 to 51, 0 means automatic) for constant quality mode in VBR rate control (from 0 to 51) (default 0) | |
| -aud <boolean> E..V....... Use access unit delimiters (default false) | |
| -bluray-compat <boolean> E..V....... Bluray compatibility workarounds (default false) | |
| -init_qpP <int> E..V....... Initial QP value for P frame (from -1 to 51) (default -1) | |
| -init_qpB <int> E..V....... Initial QP value for B frame (from -1 to 51) (default -1) | |
| -init_qpI <int> E..V....... Initial QP value for I frame (from -1 to 51) (default -1) | |
| -qp <int> E..V....... Constant quantization parameter rate control method (from -1 to 51) (default -1) | |
| -qp_cb_offset <int> E..V....... Quantization parameter offset for cb channel (from -12 to 12) (default 0) | |
| -qp_cr_offset <int> E..V....... Quantization parameter offset for cr channel (from -12 to 12) (default 0) | |
| -weighted_pred <int> E..V....... Set 1 to enable weighted prediction (from 0 to 1) (default 0) | |
| -coder <int> E..V....... Coder type (from -1 to 2) (default default) | |
| default -1 E..V....... | |
| auto 0 E..V....... | |
| cabac 1 E..V....... | |
| cavlc 2 E..V....... | |
| ac 1 E..V....... | |
| vlc 2 E..V....... | |
| -b_ref_mode <int> E..V....... Use B frames as references (from -1 to 2) (default -1) | |
| disabled 0 E..V....... B frames will not be used for reference | |
| each 1 E..V....... Each B frame will be used for reference | |
| middle 2 E..V....... Only (number of B frames)/2 will be used for reference | |
| -a53cc <boolean> E..V....... Use A53 Closed Captions (if available) (default true) | |
| -dpb_size <int> E..V....... Specifies the DPB size used for encoding (0 means automatic) (from 0 to INT_MAX) (default 0) | |
| -multipass <int> E..V....... Set the multipass encoding (from 0 to 2) (default disabled) | |
| disabled 0 E..V....... Single Pass | |
| qres 1 E..V....... Two Pass encoding is enabled where first Pass is quarter resolution | |
| fullres 2 E..V....... Two Pass encoding is enabled where first Pass is full resolution | |
| -ldkfs <int> E..V....... Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR (from 0 to 255) (default 0) | |
| -extra_sei <boolean> E..V....... Pass on extra SEI data (e.g. a53 cc) to be included in the bitstream (default true) | |
| -udu_sei <boolean> E..V....... Pass on user data unregistered SEI if available (default false) | |
| -intra-refresh <boolean> E..V....... Use Periodic Intra Refresh instead of IDR frames (default false) | |
| -single-slice-intra-refresh <boolean> E..V....... Use single slice intra refresh (default false) | |
| -max_slice_size <int> E..V....... Maximum encoded slice size in bytes (from 0 to INT_MAX) (default 0) | |
| -constrained-encoding <boolean> E..V....... Enable constrainedFrame encoding where each slice in the constrained picture is independent of other slices (default false) | |
| -lookahead_level <int> E..V....... Specifies the lookahead level. Higher level may improve quality at the expense of performance. (from -1 to 15) (default -1) | |
| auto 15 E..V....... | |
| 0 0 E..V....... | |
| 1 1 E..V....... | |
| 2 2 E..V....... | |
| 3 3 E..V....... |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
https://docs.nvidia.com/video-technologies/video-codec-sdk/12.1/nvenc-video-encoder-api-prog-guide/index.html