openelec 3.2.0 issue 2593

gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.10.11 ([email protected]) (gcc version 4.7.3 (GCC) ) #1 PREEMPT Fri Sep 13 01:30:04 CEST 2013
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: BCM2708
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 98304
[    0.000000] free_area_init_node: node 0, pgdat c0b064d8, node_mem_map c0b5b000
[    0.000000]   Normal zone: 768 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 98304 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
[    0.000000] Kernel command line: dwc_otg.lpm_enable=0 root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708.boardrev=0xe bcm2708.serial=0x4f6a697 smsc95xx.macaddr=B8:27:EB:F6:A6:97 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 ssh quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 384MB = 384MB total
[    0.000000] Memory: 378060k/378060k available, 15156k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06fdf44   (7128 kB)
[    0.000000]       .init : 0xc06fe000 - 0xc0acb044   (3893 kB)
[    0.000000]       .data : 0xc0acc000 - 0xc0b06de0   ( 236 kB)
[    0.000000]        .bss : 0xc0b06de0 - 0xc0b5af40   ( 337 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:330
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000451] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.000473] pid_max: default: 32768 minimum: 301
[    0.000741] Mount-cache hash table entries: 512
[    0.001498] CPU: Testing write buffer coherency: ok
[    0.001846] Setting up static identity map for 0xc05b4d08 - 0xc05b4d40
[    0.003124] devtmpfs: initialized
[    0.015719] xor: measuring software checksum speed
[    0.110298]    arm4regs  :   974.000 MB/sec
[    0.210290]    8regs     :   470.800 MB/sec
[    0.310339]    32regs    :   401.200 MB/sec
[    0.310359] xor: using function: arm4regs (974.000 MB/sec)
[    0.310675] NET: Registered protocol family 16
[    0.315627] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.318934] bcm2708.uart_clock = 0
[    0.326203] mailbox: Broadcom VideoCore Mailbox driver
[    0.326309] bcm2708_vcio: mailbox at f200b880
[    0.326647] bcm_power: Broadcom power driver
[    0.326674] bcm_power_open() -> 0
[    0.326685] bcm_power_request(0, 8)
[    0.827368] bcm_mailbox_read -> 00000080, 0
[    0.827388] bcm_power_request -> 0
[    0.827400] Serial: AMBA PL011 UART driver
[    0.827542] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[    0.907411] bio: create slab <bio-0> at 0
[    1.072630] raid6: int32x1     46 MB/s
[    1.241746] raid6: int32x2     59 MB/s
[    1.412209] raid6: int32x4     61 MB/s
[    1.582939] raid6: int32x8     58 MB/s
[    1.582958] raid6: using algorithm int32x4 (61 MB/s)
[    1.582970] raid6: using intx1 recovery algorithm
[    1.584782] SCSI subsystem initialized
[    1.586233] usbcore: registered new interface driver usbfs
[    1.586587] usbcore: registered new interface driver hub
[    1.586993] usbcore: registered new device driver usb
[    1.591228] Switching to clocksource stc
[    1.624959] NET: Registered protocol family 2
[    1.625736] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    1.625867] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    1.625944] TCP: Hash tables configured (established 4096 bind 4096)
[    1.626018] TCP: reno registered
[    1.626044] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.626079] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.626459] NET: Registered protocol family 1
[    1.627039] RPC: Registered named UNIX socket transport module.
[    1.627063] RPC: Registered udp transport module.
[    1.627074] RPC: Registered tcp transport module.
[    1.627084] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.654063] bcm2708_dma: DMA manager at f2007000
[    1.654478] bcm2708_gpio: bcm2708_gpio_probe c0ad8a70
[    1.655378] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    1.656099] major device number 252
[    1.656120] vma list size 12, page list size 2008, page size 4096
[    1.656139] allocated dma channel 2 (f2007200), initial state 00000008
[    1.656149] post-reset 00000008
[    1.683206] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.688234] NFS: Registering the id_resolver key type
[    1.688334] Key type id_resolver registered
[    1.688351] Key type id_legacy registered
[    1.690233] fuse init (API version 7.22)
[    1.693408] JFS: nTxBlock = 2953, nTxLock = 23628
[    1.694764] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[    1.703872] bio: create slab <bio-1> at 1
[    1.707026] Btrfs loaded
[    1.707096] msgmni has been set to 738
[    1.710851] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.710883] io scheduler noop registered (default)
[    1.710897] io scheduler deadline registered
[    1.710967] io scheduler cfq registered
[    1.711871] BCM2708FB: allocated DMA memory 56f20000
[    1.711898] BCM2708FB: allocated DMA channel 0 @ f2007000
[    1.742612] Console: switching to colour frame buffer device 228x61
[    1.758049] bcm2708_rng_init=d8dd6000
[    1.776001] brd: module loaded
[    1.776484] loop: module loaded
[    1.776788] nbd: registered device at major 43
[    1.795162] vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
[    1.795792] Loading iSCSI transport class v2.0-870.
[    1.798960] iscsi: registered transport (tcp)
[    1.802717] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[    1.805161] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
[    1.805658] tun: Universal TUN/TAP device driver, 1.6
[    1.805685] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.806299] PPP generic driver version 2.4.2
[    1.807457] usbcore: registered new interface driver smsc95xx
[    1.807576] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.007683] Core Release: 2.80a
[    2.007712] Setting default values for core params
[    2.007758] Finished setting default values for core params
[    2.207836] Using Buffer DMA mode
[    2.207863] Periodic Transfer Interrupt Enhancement - disabled
[    2.207875] Multiprocessor Interrupt Enhancement - disabled
[    2.207889] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.207908] Dedicated Tx FIFOs mode
[    2.208129] dwc_otg: Microframe scheduler enabled
[    2.208187] dwc_otg bcm2708_usb: DWC OTG Controller
[    2.208245] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    2.208305] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    2.208349] Init: Port Power? op_state=1
[    2.208360] Init: Power Port (0)
[    2.208477] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.208499] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.208516] usb usb1: Product: DWC OTG Controller
[    2.208531] usb usb1: Manufacturer: Linux 3.10.11 dwc_otg_hcd
[    2.208546] usb usb1: SerialNumber: bcm2708_usb
[    2.209779] hub 1-0:1.0: USB hub found
[    2.209836] hub 1-0:1.0: 1 port detected
[    2.210465] dwc_otg: FIQ enabled
[    2.210487] dwc_otg: NAK holdoff enabled
[    2.210497] dwc_otg: FIQ split fix enabled
[    2.210523] Module dwc_common_port init
[    2.211129] usbcore: registered new interface driver usb-storage
[    2.211838] mousedev: PS/2 mouse device common for all mice
[    2.212632] i2c /dev entries driver
[    2.213061] bcm2708_i2c_init_pinmode(0,0)
[    2.213083] bcm2708_i2c_init_pinmode(0,1)
[    2.214007] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100k)
[    2.214085] bcm2708_i2c_init_pinmode(1,2)
[    2.214100] bcm2708_i2c_init_pinmode(1,3)
[    2.214998] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100k)
[    2.216821] bcm2835-cpufreq: min=700000 max=700000 cur=700000
[    2.216935] bcm2835-cpufreq: switching to governor ondemand
[    2.216951] bcm2835-cpufreq: switching to governor ondemand
[    2.217058] cpuidle: using governor ladder
[    2.217076] cpuidle: using governor menu
[    2.217374] sdhci: Secure Digital Host Controller Interface driver
[    2.217398] sdhci: Copyright(c) Pierre Ossman
[    2.217496] sdhci: Enable low-latency mode
[    2.261332] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    2.261470] mmc0: BCM2708 SDHC host at 0x20300000 DMA 4 IRQ 20
[    2.264006] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.277421] hidraw: raw HID events driver (C) Jiri Kosina
[    2.293220] usbcore: registered new interface driver usbhid
[    2.293247] usbhid: USB HID core driver
[    2.294418] zram: Created 1 device(s) ...
[    2.294485] Netfilter messages via NETLINK v0.30.
[    2.294600] nf_conntrack version 0.5.0 (5907 buckets, 23628 max)
[    2.295424] ctnetlink v0.93: registering with nfnetlink.
[    2.295683] TCP: cubic registered
[    2.297788] NET: Registered protocol family 10
[    2.298926] NET: Registered protocol family 17
[    2.299135] Key type dns_resolver registered
[    2.299633] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    2.302107] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.315772] Freeing unused kernel memory: 3892K (c06fe000 - c0acb000)
[    2.323785] mmc0: new high speed SDHC card at address aaaa
[    2.331020] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
[    2.340160]  mmcblk0: p1 p2
[    2.401544] Indeed it is in host mode hprt0 = 00021501
[    2.601486] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.601690] Indeed it is in host mode hprt0 = 00001101
[    2.861925] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.861959] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.872453] hub 1-1:1.0: USB hub found
[    2.872635] hub 1-1:1.0: 3 ports detected
[    3.133345] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    3.134130] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    3.148134] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.151743] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.252119] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.252157] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.257446] smsc95xx v1.0.4
[    3.324906] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f6:a6:97
[    3.401651] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[    3.514626] usb 1-1.2: New USB device found, idVendor=2304, idProduct=0225
[    3.514663] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    3.514700] usb 1-1.2: Product: PCTV Remote USB
[    3.514721] usb 1-1.2: Manufacturer: Pinnacle Systems
[    3.514737] usb 1-1.2: SerialNumber: 7FFFFFFFFFFFFFFF
[    8.119682] bcm2835-cpufreq: switching to governor performance
[    8.119716] bcm2835-cpufreq: switching to governor performance
[    8.814854] systemd-udevd[815]: starting version 206
[    9.951446] Registered IR keymap rc-rc6-mce
[    9.952035] input: Media Center Ed. eHome Infrared Remote Transceiver (2304:0225) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/rc/rc0/input0
[    9.952376] rc0: Media Center Ed. eHome Infrared Remote Transceiver (2304:0225) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/rc/rc0
[   10.251460] mceusb 1-1.2:1.0: Registered Pinnacle Systems PCTV Remote USB with mce emulator interface version 1
[   10.251501] mceusb 1-1.2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
[   10.251734] usbcore: registered new interface driver mceusb
[   10.353015] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input1
[   10.356375] IR SANYO protocol handler initialized
[   10.357374] IR RC5(x) protocol handler initialized
[   10.358291] IR NEC protocol handler initialized
[   10.359176] IR Sony protocol handler initialized
[   10.360010] IR MCE Keyboard/mouse protocol handler initialized
[   10.369549] lirc_dev: IR Remote Control driver registered, major 248 
[   10.410196] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[   10.410288] IR RC6 protocol handler initialized
[   10.412127] IR JVC protocol handler initialized
[   10.417278] IR LIRC bridge handler initialized
[   11.161079] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned.
[   11.190292] lirc_rpi lirc_rpi.0: lirc_dev: driver lirc_rpi registered at minor = 1
[   11.190323] lirc_rpi: driver registered!
[   12.141465] lirc_rpi: auto-detected active high receiver on GPIO pin 18
[   12.621547] input: lircd as /devices/virtual/input/input2
[   13.461636] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.401505] Bluetooth: Core ver 2.16
[   14.404044] NET: Registered protocol family 31
[   14.404081] Bluetooth: HCI device and connection manager initialized
[   14.404139] Bluetooth: HCI socket layer initialized
[   14.404167] Bluetooth: L2CAP socket layer initialized
[   14.404289] Bluetooth: SCO socket layer initialized
[   14.997108] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   14.997943] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.097738] Console: switching to colour dummy device 80x30
[   16.530783] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[   16.532711] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   48.203343] bcm2835-cpufreq: switching to governor ondemand