whiteinge

# -*- coding: utf-8 -*-
"""MyCompany Fabric script.

* Deploy code
* Set up a local development environment

There are two ways to deploy the myrepo code:

1.  :func:`deploy` will do a full virtualenv installation/update and expand a
    tarball of the specified git revision (defaults to HEAD) to a timestamped

makoto

# How to echobot with XMPP, BOSH, and Strophe

1. Setup ejabberd(http://www.ejabberd.im/) server and setup account [email protected]
NOTE: localhost should be enough. If you setup something else, make sure you add it at /etc/hosts like this
#/etc/hosts
127.0.0.1       localhost.local

NOTE: Also download Psi(http://psi-im.org/), and make sure you can connect to your ejabberd server.

2. Download strophe(http://code.stanziq.com/strophe/) and place it (eg: /Users/makoto/work/sample/strophejs-1.0)

brandonb927

#!/bin/sh

###
# SOME COMMANDS WILL NOT WORK ON macOS (Sierra or newer)
# For Sierra or newer, see https://github.com/mathiasbynens/dotfiles/blob/master/.macos
###

# Alot of these configs have been taken from the various places
# on the web, most from here
# https://github.com/mathiasbynens/dotfiles/blob/5b3c8418ed42d93af2e647dc9d122f25cc034871/.osx

XVilka

THIS GIST WAS MOVED TO TERMSTANDARD/COLORS REPOSITORY.

PLEASE ASK YOUR QUESTIONS OR ADD ANY SUGGESTIONS AS A REPOSITORY ISSUES OR PULL REQUESTS INSTEAD!

drolfe

HPONCFG all  << end_marker
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="Dontcare" PASSWORD="UsingAutologin">
 <USER_INFO MODE="write">
   <ADD_USER
     USER_NAME="daniel"
     USER_LOGIN="daniel"
     PASSWORD="daniel123">
     <ADMIN_PRIV value ="Yes"/>
     <REMOTE_CONS_PRIV value ="Yes"/>

denji

Moved to git repository: https://github.com/denji/golang-tls

Generate private key (.key)

# Key considerations for algorithm "RSA" ≥ 2048-bit
openssl genrsa -out server.key 2048

# Key considerations for algorithm "ECDSA" ≥ secp384r1
# List ECDSA the supported curves (openssl ecparam -list_curves)

staaldraad

#!/usr/env/python
'''
    Script for fuzzing verifone terminal/pos devices. This is a bad reverse-engineer and implementation of the official protocol: http://web.archive.org/web/20120603221525/http://www.verifone.com/PDF/guides/tcl_ref.pdf

    Should work fine. Official docs were only found after the initial implementation. Not fully tested with CRC-16 checksum correctly implemented.

    Author: [email protected]
    Version: 1.0
    License: GNU GENERAL PUBLIC LICENSE (GNU) Version 2
'''

ursuad

Kafka Topics

List existing topics

bin/kafka-topics.sh --zookeeper localhost:2181 --list

Describe a topic

bin/kafka-topics.sh --zookeeper localhost:2181 --describe --topic mytopic

Purge a topic

bin/kafka-topics.sh --zookeeper localhost:2181 --alter --topic mytopic --config retention.ms=1000

... wait a minute ...

apokalyptik

The Goal

Set up Kubernetes on 3 Debian Jessie virtual machines: One master. Two nodes. Additionally do this without any "magic" so that what is required to be running to make everything work is plain and obvious.

We will be using flannel for the inter-machine networking layer. Mainly because it is useful and it seems to be pretty popular.

The Setup

a-robinson

# Make sure that you’ve installed minikube and run `minikube start` to get your Kubernetes cluster running.
minikube version (should be at least 0.19.0)
minikube start
kubectl version (should be at least 1.6.0 for both client and server)
 
-------------------
 
# Create the CockroachDB cluster and other relevant resources
kubectl create -f https://bit.ly/crdb-k8s-yaml