Windows 11 Reg fix for SN770, SN580 (and other) HMB force to 64M

WD-HMB64M.reg

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorPort]
"HMBAllocationPolicy"=dword:00000002

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\stornvme\Parameters\Device]
"HostMemoryBufferBytes"=hex(7):56,00,45,00,4e,00,5f,00,31,00,35,00,42,00,37,00,\
  26,00,44,00,45,00,56,00,5f,00,35,00,30,00,31,00,37,00,26,00,52,00,45,00,56,\
  00,5f,00,3f,00,3f,00,20,00,36,00,37,00,31,00,30,00,38,00,38,00,36,00,34,00,\
  00,00,56,00,45,00,4e,00,5f,00,31,00,35,00,42,00,37,00,26,00,44,00,45,00,56,\
  00,5f,00,35,00,30,00,34,00,31,00,26,00,52,00,45,00,56,00,5f,00,3f,00,3f,00,\
  20,00,36,00,37,00,31,00,30,00,38,00,38,00,36,00,34,00,00,00,00,00

At 64MB you should be fine then, if you still have issues I guess you have a different problem. This patch is to help people on 24H2 and 200MB allocated.

I run Server 2025, it's affectet too, as it's also 24/H2

Western Digital has released a firmware update that limits HMB to 64MB and potentially other fixes, that should be used and not this anymore.

Western Digital has released a firmware update that limits HMB to 64MB and potentially other fixes, that should be used and not this anymore.

Can you tell me if I need to delete the registry entry before putting this update?

I applied the firmware update, then removed the reg changes with https://gist.github.com/nissel/a20a6ca5f8aeb8802554f239a28833bd then rebooted

But they aren't going to interact in any strange way, the firmware patch appears to just limit the buffer to 64MB so fixes the issue in exactly the same way.

I wouldn't want to install a firmware update in a system that's crashing randomly, as if it did crash during the update that would probably be very bad. So id say it's best to leave the reg changes there until you update the firmware.

I applied the firmware update, then removed the reg changes with https://gist.github.com/nissel/a20a6ca5f8aeb8802554f239a28833bd then rebooted

But they aren't going to interact in any strange way, the firmware patch appears to just limit the buffer to 64MB so fixes the issue in exactly the same way.

I wouldn't want to install a firmware update in a system that's crashing randomly, as if it did crash during the update that would probably be very bad. So id say it's best to leave the reg changes there until you update the firmware.

Well I wouldn't install an update on a system that could shut down at any moment either :). If you modify the registry, the changes are applied only after a reboot. But I'll do as you said anyway. Thanks!

Anyone know what these values should be for an sn550 drive? I've also been affected by BSOD but no firmware update. New HWinfo update reports 200mb hmb even if it set all variables.

Anyone know what these values should be for an sn550 drive? I've also been affected by BSOD but no firmware update. New HWinfo update reports 200mb hmb even if it set all variables.

Just try to disable HMB, setting the limit didn't help me initially either, although I have an SN770

Anyone know what these values should be for an sn550 drive? I've also been affected by BSOD but no firmware update. New HWinfo update reports 200mb hmb even if it set all variables.

check the device manager

Thanks, value that worked for the sn550 if anyone else is interested is:
VEN_15B7&DEV_5009&REV_?? 67108864