Created
October 28, 2021 16:11
-
-
Save nissicreative/277c80a23e83b5de923aadab050c186f to your computer and use it in GitHub Desktop.
Husqvarna Error Codes
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
<?php | |
return [ | |
'error_codes' => [ | |
0 => 'Unexpected error', | |
1 => 'Outside working area', | |
2 => 'No loop signal', | |
3 => 'Wrong loop signal', | |
4 => 'Loop sensor problem, front', | |
5 => 'Loop sensor problem, rear', | |
6 => 'Loop sensor problem, left', | |
7 => 'Loop sensor problem, right', | |
8 => 'Wrong PIN code', | |
9 => 'Trapped', | |
10 => 'Upside down', | |
11 => 'Low battery', | |
12 => 'Empty battery', | |
13 => 'No drive', | |
14 => 'Mower lifted', | |
15 => 'Lifted', | |
16 => 'Stuck in charging station', | |
17 => 'Charging station blocked', | |
18 => 'Collision sensor problem, rear', | |
19 => 'Collision sensor problem, front', | |
20 => 'Wheel motor blocked, right', | |
21 => 'Wheel motor blocked, left', | |
22 => 'Wheel drive problem, right', | |
23 => 'Wheel drive problem, left', | |
24 => 'Cutting system blocked', | |
25 => 'Cutting system blocked', | |
26 => 'Invalid sub-device combination', | |
27 => 'Settings restored', | |
28 => 'Memory circuit problem', | |
29 => 'Slope too steep', | |
30 => 'Charging system problem', | |
31 => 'STOP button problem', | |
32 => 'Tilt sensor problem', | |
33 => 'Mower tilted', | |
34 => 'Cutting stopped - slope too steep', | |
35 => 'Wheel motor overloaded, right', | |
36 => 'Wheel motor overloaded, left', | |
37 => 'Charging current too high', | |
38 => 'Electronic problem', | |
39 => 'Cutting motor problem', | |
40 => 'Limited cutting height range', | |
41 => 'Unexpected cutting height adj', | |
42 => 'Limited cutting height range', | |
43 => 'Cutting height problem, drive', | |
44 => 'Cutting height problem, curr', | |
45 => 'Cutting height problem, dir', | |
46 => 'Cutting height blocked', | |
47 => 'Cutting height problem', | |
48 => 'No response from charger', | |
49 => 'Ultrasonic problem', | |
50 => 'Guide 1 not found', | |
51 => 'Guide 2 not found', | |
52 => 'Guide 3 not found', | |
53 => 'GPS navigation problem', | |
54 => 'Weak GPS signal', | |
55 => 'Difficult finding home', | |
56 => 'Guide calibration accomplished', | |
57 => 'Guide calibration failed', | |
58 => 'Temporary battery problem', | |
59 => 'Temporary battery problem', | |
60 => 'Temporary battery problem', | |
61 => 'Temporary battery problem', | |
62 => 'Temporary battery problem', | |
63 => 'Temporary battery problem', | |
64 => 'Temporary battery problem', | |
65 => 'Temporary battery problem', | |
66 => 'Battery problem', | |
67 => 'Battery problem', | |
68 => 'Temporary battery problem', | |
69 => 'Alarm! Mower switched off', | |
70 => 'Alarm! Mower stopped', | |
71 => 'Alarm! Mower lifted', | |
72 => 'Alarm! Mower tilted', | |
73 => 'Alarm! Mower in motion', | |
74 => 'Alarm! Outside geofence', | |
75 => 'Connection changed', | |
76 => 'Connection NOT changed', | |
77 => 'Com board not available', | |
78 => 'Slipped - Mower has Slipped. Situation not solved with moving pattern', | |
79 => 'Invalid battery combination - Invalid combination of different battery types.', | |
80 => 'Cutting system imbalance Warning', | |
81 => 'Safety function faulty', | |
82 => 'Wheel motor blocked, rear right', | |
83 => 'Wheel motor blocked, rear left', | |
84 => 'Wheel drive problem, rear right', | |
85 => 'Wheel drive problem, rear left', | |
86 => 'Wheel motor overloaded, rear right', | |
87 => 'Wheel motor overloaded, rear left', | |
88 => 'Angular sensor problem', | |
89 => 'Invalid system configuration', | |
90 => 'No power in charging station', | |
], | |
]; |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment