Rakefile to deploy and rollback to Heroku in two different environments (staging and production) for the same app

deploy.rake

#Deploy and rollback on Heroku in staging and production
task :deploy_staging => ['deploy:set_staging_app', 'deploy:push', 'deploy:restart', 'deploy:tag']
task :deploy_production => ['deploy:set_production_app', 'deploy:push', 'deploy:restart', 'deploy:tag']

namespace :deploy do
  PRODUCTION_APP = 'YOUR_PRODUCTION_APP_NAME_ON_HEROKU'
  STAGING_APP = 'YOUR_STAGING_APP_NAME_ON_HEROKU'

  task :staging_migrations => [:set_staging_app, :push, :off, :migrate, :restart, :on, :tag]
  task :staging_rollback => [:set_staging_app, :off, :push_previous, :restart, :on]

  task :production_migrations => [:set_production_app, :push, :off, :migrate, :restart, :on, :tag]
  task :production_rollback => [:set_production_app, :off, :push_previous, :restart, :on]

  task :set_staging_app do
    APP = STAGING_APP
  end

  task :set_production_app do
  	APP = PRODUCTION_APP
  end

  task :push do
    puts 'Deploying site to Heroku ...'
    puts `git push -f [email protected]:#{APP}.git`
  end
  
  task :restart do
    puts 'Restarting app servers ...'
    puts `heroku restart --app #{APP}`
  end
  
  task :tag do
    release_name = "#{APP}_release-#{Time.now.utc.strftime("%Y%m%d%H%M%S")}"
    puts "Tagging release as '#{release_name}'"
    puts `git tag -a #{release_name} -m 'Tagged release'`
    puts `git push --tags [email protected]:#{APP}.git`
  end
  
  task :migrate do
    puts 'Running database migrations ...'
    puts `heroku rake db:migrate --app #{APP}`
  end
  
  task :off do
    puts 'Putting the app into maintenance mode ...'
    puts `heroku maintenance:on --app #{APP}`
  end
  
  task :on do
    puts 'Taking the app out of maintenance mode ...'
    puts `heroku maintenance:off --app #{APP}`
  end

  task :push_previous do
    prefix = "#{APP}_release-"
    releases = `git tag`.split("\n").select { |t| t[0..prefix.length-1] == prefix }.sort
    current_release = releases.last
    previous_release = releases[-2] if releases.length >= 2
    if previous_release
      puts "Rolling back to '#{previous_release}' ..."
      
      puts "Checking out '#{previous_release}' in a new branch on local git repo ..."
      puts `git checkout #{previous_release}`
      puts `git checkout -b #{previous_release}`
      
      puts "Removing tagged version '#{previous_release}' (now transformed in branch) ..."
      puts `git tag -d #{previous_release}`
      puts `git push [email protected]:#{APP}.git :refs/tags/#{previous_release}`
      
      puts "Pushing '#{previous_release}' to Heroku master ..."
      puts `git push [email protected]:#{APP}.git +#{previous_release}:master --force`
      
      puts "Deleting rollbacked release '#{current_release}' ..."
      puts `git tag -d #{current_release}`
      puts `git push [email protected]:#{APP}.git :refs/tags/#{current_release}`
      
      puts "Retagging release '#{previous_release}' in case to repeat this process (other rollbacks)..."
      puts `git tag -a #{previous_release} -m 'Tagged release'`
      puts `git push --tags [email protected]:#{APP}.git`
      
      puts "Turning local repo checked out on master ..."
      puts `git checkout master`
      puts 'All done!'
    else
      puts "No release tags found - can't roll back!"
      puts releases
    end
  end
end

@jksilliman - i think you could test if the migrations have changed by doing

if `git diff origin/HEAD HEAD`.include?("/db/migrate/")

and then decide whether you wanted to put it into maintenance mode during the push.

Hi cj, no it isn't and you haven't (if you see the deploy_staging and deploy_production tasks, they are without migrations).
As for the process to deploy the code I think that the safest way is something like this:

1. Commit/Push your safe code on git/Github DEVELOP (after merging from a specific branch, if needed) with only the migrations that will be subsequently useful
2. Deploy (without migrations) on Heroku STAGING your safe code with only the migrations that will be subsequently useful. You can use this script on the root:

"rake deploy_staging"

3. Run heroku rake db:migrate on STAGING

4. Commit/Push your safe code on git/Github MASTER (after merging from DEVELOP branch) with only the migrations that will be subsequently useful

5. Deploy (without migrations) on Heroku PRODUCTION your safe code with only the migrations that will be subsequently useful. You can use this script on the root:

"rake deploy_production"

6. Run heroku rake db:migrate on PRODUCTION (WARNING: for critical migrations, such as ALTER TABLE, please consider to start an "Heroku Follower", as rollback in bad cases and to drop after the migration was run)

7. Back to the code: now is the moment to commit/push on git/Github DEVELOP the new code that uses the new migrations

8. Deploy (without migrations) on Heroku STAGING your safe code that uses the new migrations run in step 3

9. Commit/Push your safe code on git/Github MASTER (after merging from DEVELOP branch) the new code that uses the new migrations

10. Deploy (without migrations) on Heroku PRODUCTION your safe code that uses the new migrations run in step 6

Please note that this process is safe in every moment. For instance:

• There isn't any kind of downtime deploying code that must use new migrations (waiting for rake timing of running or that heroku restarts the servers)
• If another developer pushes new code all should be good

Hope this helps..

Bye,
Nicola.

For the Cedar stack, you need to modify the deploy:migrate task as follows:

task :migrate do
puts 'Running database migrations ...'
puts heroku run rake db:migrate --app #{APP}
end

Note the word run inserted between "heroku" and "rake".

Hey, thanks for the nice gist.

I stumbled upon a problem with new bundler 1.2.0.pre. (I'm using rbenv for ruby 1.9.3 installing). When I try the run heroku commands from within the rake task, I got an bundler error: our Ruby version is 1.9.2, but your Gemfile specified 1.9.3.

I know, that is not problem specific to this gist, but maybe you have an idea to solve this?

Best,
benni

Very convenient, thanks for sharing!

thank you :)

nice gist! there's a rollback feature in heroku (maybe this is new). heroku rollback --app app_name, so you don't actually need to tag the releases yourself now. heroku releases --app app_name

here are my mods if you're curious: https://gist.github.com/4410411

I try running heroku run rake deploy but i get an error on my app:
/app/vendor/bundle/ruby/1.9.1/gems/rake-10.0.4/lib/rake/task_manager.rb:49:in []' /app/vendor/bundle/ruby/1.9.1/gems/rake-10.0.4/lib/rake/application.rb:142:ininvoke_task'
/app/vendor/bundle/ruby/1.9.1/gems/rake-10.0.4/lib/rake/application.rb:101:in block (2 levels) in top_level' /app/vendor/bundle/ruby/1.9.1/gems/rake-10.0.4/lib/rake/application.rb:101:ineach'
/app/vendor/bundle/ruby/1.9.1/gems/rake-10.0.4/lib/rake/application.rb:101:in block in top_level' /app/vendor/bundle/ruby/1.9.1/gems/rake-10.0.4/lib/rake/application.rb:110:inrun_with_threads'
/app/vendor/bundle/ruby/1.9.1/gems/rake-10.0.4/lib/rake/application.rb:95:in top_level' /app/vendor/bundle/ruby/1.9.1/gems/rake-10.0.4/lib/rake/application.rb:73:inblock in run'
/app/vendor/bundle/ruby/1.9.1/gems/rake-10.0.4/lib/rake/application.rb:160:in standard_exception_handling' /app/vendor/bundle/ruby/1.9.1/gems/rake-10.0.4/lib/rake/application.rb:70:inrun'
/app/vendor/bundle/ruby/1.9.1/gems/rake-10.0.4/bin/rake:33:in <top (required)>' /app/vendor/bundle/ruby/1.9.1/bin/rake:19:inload'
/app/vendor/bundle/ruby/1.9.1/bin/rake:19:in `

'
Would you know what should I do to fix this ?

Made a few abstractions, additions, protections https://gist.github.com/jphenow/5694169

Extracting the tasks into a class for easier extension:

https://gist.github.com/jfeaver/9820478

Thanks for the great foundation work @njvitto!

I added Rspec testing, improved Heroku toolbelt support, and post-deploy rake task running on my fork.

Great task! :)

A interesting thing happened the other day while I was using it to deploy code and run migrations.

Heroku Toolbelt detected that there is an update available and started updating itself in the middle of a running task. This resulted in maintenance mode being turned on, code being deployed and all other tasks cancelled because of the "update in progress" status. This left the environment down and its DB "unmigrated".

I recommend adding another task that is run first:

  task :update_toolbelt do
    puts 'Checking for Heroku Toolbelt updates ...'
    puts `heroku update`
    puts `heroku plugins:update`
  end

And you probably want to run it first when deploying to production. For example:

task :deploy_production => ['deploy:update_toolbelt', 'deploy:set_production_app', 'deploy:push', 'deploy:restart', 'deploy:tag']

namespace :deploy do
  ...
  task :production_migrations => [:update_toolbelt, :set_production_app, :push, :off, :migrate, :restart, :on, :tag]

Hope this helps!

EDIT: Added the plugin update check.