SEIL/x86 boot log: see https://twitter.com/hermita_akiba/status/923761809772785664 and http://www.gdm.or.jp/crew/2017/1027/240884/ , https://store.atworks.co.jp/eol/eol2014/secure-beagle/

seil_x86-boot.log

>> NetBSD/i386 BIOS Boot, Revision 3.3
>> ([email protected], Tue Oct 10 10:03:01 JST 2017)
>> Memory: 635/2043700 k
Press return to boot now, any other key for boot menu
booting hd0a:seilfirm.img - starting in 0
FIRMWARE-TYPE: SEIL/X86
firmware checksum ok
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.1_STABLE (SEILX86_MD) #0: Tue Oct 10 09:57:38 JST 2017
	[email protected]:/disk2/home/releng/build/xb01/5.80/src/work.i386/obj/sys/arch/i386/compile/SEILX86_MD
total memory = 2002 MB
avail memory = 1904 MB
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Xeon E3-12xx, 2nd gen i7, i5, i3 2xxx (686-class), 2494.45 MHz, id 0x206a7
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 17bae3ff<SSE3,PCLMULQDQ,DTES64,MONITOR,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE41,SSE42,X2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX>
cpu0: features3 28100000<XD,RDTSCP,EM64T>
cpu0: "Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 256 KB 64B/line 8-way
cpu0: L3 cache 3 MB 64B/line 12-waycpu0: 64B prefetching
cpu0: ITLB 64 4 KB entries 4-way, 8 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way
cpu0: L2 STLB 512 4 KB entries 4-waycpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (700 mV)  - unknown CPU or operating point.
/disk2/home/releng/build/xb01/5.80/src/sys/arch/x86/x86/mtrr_i686.c: FIXME: more than 8 MTRRs
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x0104 (rev. 0x09)
ehci0 at pci0 dev 26 function 0: Intel product 0x1c2d (rev. 0x05)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ehci0: open control pipe: addr#0 ep#0(OUT)
uhub0 at usb0
uhub0: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: single transaction translator
uhub0: 2 ports with 2 removable, self powered
ehci0: open interrupt pipe: addr#1 iface#0,0 ep#1(IN)
ppb0 at pci0 dev 28 function 0: Intel product 0x1c10 (rev. 0xb5)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: ASPEED Technology AST1150 PCIe-to-PCI bridge (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci2 dev 0 function 0: ASPEED Technology ASPEED Graphics Family (rev. 0x10)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
ppb2 at pci0 dev 28 function 1: Intel product 0x1c12 (rev. 0xb5)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci3 dev 0 function 0: Intel i82574L, rev. 0
wm0: interrupting at irq 10
wm0: Ethernet address XX:XX:XX:XX:XX:XX
bmphy0 at wm0 phy 1: i82567 10/100/1000 media interface, rev. 1
bmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
rename wm0 to lan0
ppb3 at pci0 dev 28 function 2: Intel product 0x1c14 (rev. 0xb5)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci4 dev 0 function 0: Intel i82574L, rev. 0
wm1: interrupting at irq 5
wm1: Ethernet address XX:XX:XX:XX:XX:XX
bmphy1 at wm1 phy 1: i82567 10/100/1000 media interface, rev. 1
bmphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
rename wm1 to lan1
ppb4 at pci0 dev 28 function 3: Intel product 0x1c16 (rev. 0xb5)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
wm2 at pci5 dev 0 function 0: Intel i82574L, rev. 0
wm2: interrupting at irq 11
wm2: Ethernet address XX:XX:XX:XX:XX:XX
bmphy2 at wm2 phy 1: i82567 10/100/1000 media interface, rev. 1
bmphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
rename wm2 to lan2
ppb5 at pci0 dev 28 function 4: Intel product 0x1c18 (rev. 0xb5)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
wm3 at pci6 dev 0 function 0: Intel i82574L, rev. 0
wm3: interrupting at irq 11
wm3: Ethernet address XX:XX:XX:XX:XX:XX
bmphy3 at wm3 phy 1: i82567 10/100/1000 media interface, rev. 1
bmphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
rename wm3 to lan3
ehci1 at pci0 dev 29 function 0: Intel product 0x1c26 (rev. 0x05)
ehci1: interrupting at irq 10
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ehci1: open control pipe: addr#0 ep#0(OUT)
uhub1 at usb1
uhub1: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: single transaction translator
uhub1: 2 ports with 2 removable, self powered
ehci1: open interrupt pipe: addr#1 iface#0,0 ep#1(IN)
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x1c4f (rev. 0x05)
pciide0 at pci0 dev 31 function 2
pciide0: Intel product 0x1c01 (rev. 0x05)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
pciide0: using irq 11 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus1 at pciide0 channel 1
Intel product 0x1c22 (SMBus serial bus, revision 0x05) at pci0 dev 31 function 3 not configured
pciide1 at pci0 dev 31 function 5
pciide1: Intel product 0x1c09 (rev. 0x05)
pciide1: bus-master DMA support present, but unused (no driver support)
pciide1: primary channel wired to native-PCI mode
pciide1: using irq 11 for native-PCI interrupt
atabus2 at pciide1 channel 0
pciide1: secondary channel wired to native-PCI mode
atabus3 at pciide1 channel 1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xffisapnp0: no ISA Plug 'n Play devices found
IPsec Tunnel Interface Device: using access concentrater
mfil: mac address filter
md0: internal 36864 KB image area
Initializing SEIL IPsec Processing Engine v2.0
  Copyright 2007 Internet Initiative Japan Inc.
Initialized H/W IPsec processing.
IPsec: SP Cache size = 2048
IPsec: SP Negative Cache size = 2048
IPsec: SA:SPI Cache size = 2048
IPsec: SA:SP Cache size = 2048
IPsec: Initialized Security Association Processing.
ehci0: open control pipe: addr#0 ep#0(OUT)
ehci1: open control pipe: addr#0 ep#0(OUT)
uhub2 at uhub1 port 1
uhub2: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1
uhub3: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 8 ports with 8 removable, self powered
ehci1: open interrupt pipe: addr#2 iface#0,0 ep#1(IN)
uhub3: 6 ports with 6 removable, self powered
ehci0: open interrupt pipe: addr#2 iface#0,0 ep#1(IN)
ehci1: open control pipe: addr#0 ep#0(OUT)
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: GH PicoDriveJ3, rev 2.10/1.10, addr 3
umass0: using SCSI over Bulk-Only
ehci1: open bulk pipe: addr#3 iface#0,0 ep#2(OUT)
ehci1: open bulk pipe: addr#3 iface#0,0 ep#1(IN)
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <GH, PicoDriveJ3, PMAP> disk removable
sd0: fabricating a geometry
sd0: 29573 MB, 29573 cyl, 64 head, 32 sec, 512 bytes/sect x 60566016 sectors
ehci1: open control pipe: addr#0 ep#0(OUT)
uhub4 at uhub2 port 7
uhub4: American Megatrends Inc. Virtual Hub, class 9/0, rev 2.00/1.00, addr 4
uhub4: single transaction translator
uhub4: 7 ports with 7 removable, self powered
ehci1: open interrupt pipe: addr#4 iface#0,0 ep#1(IN)
sd0: fabricating a geometry
sd0: fabricating a geometry
sd0: fabricating a geometry
boot device: sd0
root on md0a dumps on md0b
root file system type: ffs
Starting root file system check:
/dev/rmd0a: filesd0: fabricating a geometry
 system is clean; not checking
sd0: fabricating a geometry
sd0: fabricating a geometry
sd0: fabricating a geometry
sd0: fabricating a geometry
sd0: fabricating a geometry
sd0: fabricating a geometry
sd0: fabricating a geometry
sd0: fabricating a geometry
sd0: fabricating a geometry
watchdog-timer
open: Device not configured
sd0: fabricating a geometry
sd0: fabricating a geometry
SEIL/x86 Startup
Copyright 2001 Internet Initiative Japan Inc.
sd0: fabricating a geometry

SEIL/x86 Fuji Ver. 5.80 (Release)


Kernel Side Setup
sd0: fabricating a geometry
building databases...
iipf: IPv4/IPv6 Packet Filter Enabled
flush all filter rules
add net 224.0.0.0: gateway 127.0.0.1
rc.seil
use fallback factory configuration
config |ooooooooooooooooooooooooooooooooooooooooooooooooooooo| done
 evstatmgrd ifpolld ipsecmgrd polld rteventd.
login: admin
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

  Warning! Do not forget to set admin password.

# show status interface lan
                        ^
    lan0    lan1    lan2    lan3
# show status interface lan0
interface lan0:
        Description=""
        Status=link down, administratively up
        MTU=1500
        LastChange=2017/10/28 12:31:11
        Ipkts=0, Ierrs=0, Opkts=3, Oerrs=0, Colls=0
        InOctets=0, OutOctets=386, InDrops=0, OutDiscards=0
        InUnknownProtos=0
        Media=auto (none)
        EthernetAddress=XX:XX:XX:XX:XX:XX
        IP   address=192.168.0.1 netmask=255.255.255.0 broadcast=192.168.0.255
        IPv6 address=fe80::XXX:XXX:XXXX:XXXX%lan0 prefixlen=64 scopeid 0x1
#