Last active
November 12, 2024 18:04
-
-
Save noone2k/2ddea4c9bf116aaaefb8626b064d9a41 to your computer and use it in GitHub Desktop.
bc2500 info/control with esphome
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| esphome: | |
| name: bc2500-ble-idf | |
| friendly_name: bc2500-ble-idf | |
| esp32: | |
| board: az-delivery-devkit-v4 | |
| framework: | |
| type: esp-idf | |
| sdkconfig_options: | |
| CONFIG_FREERTOS_UNICORE: y | |
| advanced: | |
| ignore_efuse_mac_crc: true | |
| # Enable logging | |
| logger: | |
| # level: INFO | |
| # level: DEBUG | |
| # baud_rate: 0 | |
| ota: | |
| password: !secret ota_password | |
| wifi: | |
| ssid: !secret wifi_ssid | |
| password: !secret wifi_password | |
| reboot_timeout: 0s | |
| fast_connect: True | |
| # Enable fallback hotspot (captive portal) in case wifi connection fails | |
| ap: | |
| ssid: "Bc2500-Ble Fallback Hotspot" | |
| web_server: | |
| port: 80 | |
| local: true | |
| js_include: "./v2/www.js" | |
| js_url: "" | |
| version: 2 | |
| captive_portal: | |
| mqtt: | |
| id: mqtt_client | |
| broker: !secret mqtt_broker | |
| port: !secret mqtt_port | |
| discovery: False | |
| reboot_timeout: 0s | |
| topic_prefix: b2500 | |
| log_topic: b2500/debug | |
| time: | |
| - platform: sntp | |
| id: sntp_time | |
| on_time: | |
| # Every 10 seconds | |
| - seconds: /10 | |
| then: | |
| - script.execute: ble_process | |
| - script.wait: ble_process | |
| #- script.execute: power_zero | |
| #- button.press: query_info3 | |
| globals: | |
| - id: ble_1_connected | |
| type: bool | |
| initial_value: '0' | |
| - id: ble_1_initialized | |
| type: bool | |
| initial_value: '0' | |
| - id: ble_2_connected | |
| type: bool | |
| initial_value: '0' | |
| - id: ble_2_initialized | |
| type: bool | |
| initial_value: '0' | |
| - id: cmd30_xor_last_1 | |
| type: int | |
| initial_value: '0' | |
| - id: cmd30_xor_last_2 | |
| type: int | |
| initial_value: '0' | |
| - id: internal_console_dbg | |
| type: bool | |
| initial_value: '0' | |
| - id: internal_console_hexdump | |
| type: bool | |
| initial_value: '1' | |
| esp32_ble_tracker: | |
| ble_client: | |
| - mac_address: !secret hm2500_1_mac | |
| id: bc2500_1 | |
| on_connect: | |
| then: | |
| - globals.set: | |
| id: ble_1_connected | |
| value: '1' | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_1 | |
| state: ON | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 1 | |
| - script.wait: ble_set_time | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 1 | |
| - script.wait: ble_set_time | |
| on_disconnect: | |
| then: | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_1 | |
| state: OFF | |
| - globals.set: | |
| id: ble_1_connected | |
| value: '0' | |
| - globals.set: | |
| id: ble_1_initialized | |
| value: '0' | |
| - mac_address: !secret hm2500_2_mac | |
| id: bc2500_2 | |
| on_connect: | |
| then: | |
| - globals.set: | |
| id: ble_2_connected | |
| value: '1' | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_2 | |
| state: ON | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 2 | |
| - script.wait: ble_set_time | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 2 | |
| - script.wait: ble_set_time | |
| on_disconnect: | |
| then: | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_2 | |
| state: OFF | |
| - globals.set: | |
| id: ble_2_connected | |
| value: '0' | |
| - globals.set: | |
| id: ble_2_initialized | |
| value: '0' | |
| button: | |
| - platform: restart | |
| id: controller_restart | |
| name: "Restart Controller" | |
| number: | |
| - platform: template | |
| name: "D1-52: Entladeschwelle" | |
| id: sensor_discharge_treshold_1 | |
| state_topic: b2500/1/battery/discharge_treshold | |
| command_topic: b2500/1/battery/discharge_treshold/set | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 500 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_discharge_treshold | |
| ble_device_nr: 1 | |
| discharge: !lambda return x; | |
| - platform: template | |
| name: "D1-53: DOD" | |
| state_topic: b2500/1/battery/dod | |
| command_topic: b2500/1/battery/dod/set | |
| id: sensor_dod_1 | |
| optimistic: True | |
| min_value: 10 | |
| max_value: 100 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_dod | |
| ble_device_nr: 1 | |
| dod: !lambda return x; | |
| - platform: template | |
| name: "D2-52: Entladeschwelle" | |
| id: sensor_discharge_treshold_2 | |
| state_topic: b2500/2/battery/discharge_treshold | |
| command_topic: b2500/2/battery/discharge_treshold/set | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 500 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_discharge_treshold | |
| ble_device_nr: 2 | |
| discharge: !lambda return x; | |
| - platform: template | |
| name: "D2-53: DOD" | |
| state_topic: b2500/2/battery/dod | |
| command_topic: b2500/2/battery/dod/set | |
| id: sensor_dod_2 | |
| optimistic: True | |
| min_value: 10 | |
| max_value: 100 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_dod | |
| ble_device_nr: 2 | |
| dod: !lambda return x; | |
| ### power zero | |
| - platform: template | |
| name: "MQTT: opendtu set limit" | |
| id: mqtt_opendtu_limit | |
| internal: False | |
| state_topic: !secret mqtt_opendtu_limit_cmd | |
| command_topic: !secret mqtt_opendtu_limit_state | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 75 | |
| step: 1 | |
| restore_value: True | |
| - platform: template | |
| name: "MQTT: opendtu set limit max" | |
| id: mqtt_opendtu_limit_max | |
| internal: False | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 75 | |
| step: 1 | |
| restore_value: True | |
| switch: | |
| - platform: template | |
| id: switch_powerout_1_1 | |
| name: "D1-01: Power Out 1" | |
| state_topic: b2500/1/power1/enabled | |
| command_topic: b2500/1/power1/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - switch.turn_on: switch_powerout_1_1 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| on_turn_off: | |
| then: | |
| - switch.turn_off: switch_powerout_1_1 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| - platform: template | |
| id: switch_powerout_1_2 | |
| name: "D1-02: Power Out 2" | |
| state_topic: b2500/1/power2/enabled | |
| command_topic: b2500/1/power2/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - switch.turn_on: switch_powerout_1_2 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| on_turn_off: | |
| then: | |
| - switch.turn_off: switch_powerout_1_2 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| - platform: template | |
| id: switch_powerout_2_1 | |
| name: "D2-01: Power Out 1" | |
| state_topic: b2500/2/power1/enabled | |
| command_topic: b2500/2/power1/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| - platform: template | |
| id: switch_powerout_2_2 | |
| name: "D2-02: Power Out 2" | |
| state_topic: b2500/2/power2/enabled | |
| command_topic: b2500/2/power2/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| - platform: template | |
| id: switch_pv2_passthrough_1 | |
| name: "D1-03: PV2 Passtrough" | |
| state_topic: b2500/1/pv2/passtrough | |
| command_topic: b2500/1/pv2/passtrough/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 1 | |
| switch_cmd: 0 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 1 | |
| switch_cmd: 1 | |
| - platform: template | |
| id: switch_pv2_passthrough_2 | |
| name: "D2-03: PV2 Passtrough" | |
| state_topic: b2500/2/pv2/passtrough | |
| command_topic: b2500/2/pv2/passtrough/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 2 | |
| switch_cmd: 0 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 2 | |
| switch_cmd: 1 | |
| - platform: template | |
| id: switch_debug_hexdump | |
| name: "INTERNAL:DEBUG HEXDUMP" | |
| optimistic: True | |
| #assumed_state: True | |
| - platform: template | |
| id: switch_opendtu_limit | |
| name: "MQTT: opendtu - zero power" | |
| optimistic: True | |
| #assumed_state: True | |
| text: | |
| - platform: template | |
| name: "A1-t01 - Device Type" | |
| id: txt_A01_1 | |
| state_topic: b2500/1/device/type | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t02 - Device ID" | |
| state_topic: b2500/1/device/id | |
| id: txt_A02_1 | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t03 - MAC" | |
| id: txt_A03_1 | |
| state_topic: b2500/1/device/ble_mac | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t04 - SSID" | |
| id: txt_A11_1 | |
| state_topic: b2500/1/device/wifi_ssid | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t01 - Device Type" | |
| id: txt_A01_2 | |
| state_topic: b2500/2/device/type | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t02 - Device ID" | |
| id: txt_A02_2 | |
| state_topic: b2500/2/device/id | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t03 - MAC" | |
| id: txt_A03_2 | |
| optimistic: true | |
| state_topic: b2500/2/device/ble_mac | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t04 - SSID" | |
| id: txt_A11_2 | |
| state_topic: b2500/2/device/wifi_ssid | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t56: Szene" | |
| id: txt_scene_1 | |
| state_topic: b2500/1/device/scene | |
| optimistic: true | |
| max_length: 32 | |
| mode: text | |
| - platform: template | |
| name: "A1-t57: Region" | |
| id: txt_region_1 | |
| state_topic: b2500/1/device/region | |
| optimistic: true | |
| max_length: 8 | |
| mode: text | |
| - platform: template | |
| name: "A2-t56: Szene" | |
| id: txt_scene_2 | |
| state_topic: b2500/2/device/scene | |
| optimistic: true | |
| max_length: 32 | |
| mode: text | |
| - platform: template | |
| name: "A2-t57: Region" | |
| id: txt_region_2 | |
| state_topic: b2500/2/device/region | |
| optimistic: true | |
| max_length: 8 | |
| mode: text | |
| binary_sensor: | |
| - platform: template | |
| name: "D1-i01: PV 1 - Aktiv" | |
| id: bool_pv_active_1_1 | |
| state_topic: b2500/1/pv1/active | |
| - platform: template | |
| name: "D1-i11: PV 2 - Aktiv" | |
| id: bool_pv_active_1_2 | |
| state_topic: b2500/1/pv2/active | |
| - platform: template | |
| name: "D1-i02: PV 1 - Transparent" | |
| id: bool_pv_transparent_1_1 | |
| state_topic: b2500/1/pv1/transparent | |
| - platform: template | |
| name: "D1-i11: PV 2 - Transparent" | |
| id: bool_pv_transparent_1_2 | |
| state_topic: b2500/1/pv2/transparent | |
| - platform: template | |
| name: "D1-i54: Wifi Connected (?)" | |
| id: bool_wifi_ok_1 | |
| state_topic: b2500/1/device/wifi_ok | |
| - platform: template | |
| name: "D1-i55: MQTT1 Connected" | |
| id: bool_mqtt1_ok_1 | |
| state_topic: b2500/1/device/mqtt_ok | |
| - platform: template | |
| name: "D1-i58: BLE Connected" | |
| id: bool_ble_ok_1 | |
| state_topic: b2500/1/device/ble_ok | |
| - platform: template | |
| name: "D1-i21: Ausgang 1 - Aktiv" | |
| id: bool_power_active_1_1 | |
| state_topic: b2500/1/power1/active | |
| - platform: template | |
| name: "D1-i31: Ausgang 2 - Aktiv" | |
| id: bool_power_active_1_2 | |
| state_topic: b2500/1/power2/active | |
| - platform: template | |
| name: "D1-i40: Erweiterung 1 - angeschlossen" | |
| id: bool_extern_connected_1_1 | |
| state_topic: b2500/1/extern1/connected | |
| - platform: template | |
| name: "D1-i41: Erweiterung 2 - angeschlossen" | |
| id: bool_extern_connected_1_2 | |
| state_topic: b2500/1/extern2/connected | |
| - platform: template | |
| name: "D2-i01: PV 1 - Aktiv" | |
| id: bool_pv_active_2_1 | |
| state_topic: b2500/2/pv1/active | |
| - platform: template | |
| name: "D2-i11: PV 2 - Aktiv" | |
| id: bool_pv_active_2_2 | |
| state_topic: b2500/2/pv2/active | |
| - platform: template | |
| name: "D2-i02: PV 1 - Transparent" | |
| id: bool_pv_transparent_2_1 | |
| state_topic: b2500/2/pv1/transparent | |
| - platform: template | |
| name: "D2-i12: PV 2 - Transparent" | |
| id: bool_pv_transparent_2_2 | |
| state_topic: b2500/2/pv2/transparent | |
| - platform: template | |
| name: "D2-i54: Wifi Connected (?)" | |
| id: bool_wifi_ok_2 | |
| state_topic: b2500/2/device/wifi_ok | |
| - platform: template | |
| name: "D2-i55: MQTT1 Connected" | |
| id: bool_mqtt1_ok_2 | |
| state_topic: b2500/2/device/mqtt_ok | |
| - platform: template | |
| name: "D2-i58: BLE Connected" | |
| id: bool_ble_ok_2 | |
| state_topic: b2500/2/device/ble_ok | |
| - platform: template | |
| name: "D2-i21: Ausgang 1 - Aktiv" | |
| id: bool_power_active_2_1 | |
| state_topic: b2500/2/power1/active | |
| - platform: template | |
| name: "D2-i31: Ausgang 2 - Aktiv" | |
| id: bool_power_active_2_2 | |
| state_topic: b2500/2/power2/active | |
| - platform: template | |
| name: "D2-i40: Erweiterung 1 - angeschlossen" | |
| id: bool_extern_connected_2_1 | |
| state_topic: b2500/2/extern1/connected | |
| - platform: template | |
| name: "D2-i41: Erweiterung 2 - angeschlossen" | |
| id: bool_extern_connected_2_2 | |
| state_topic: b2500/2/extern2/connected | |
| sensor: | |
| - platform: template | |
| name: "D1-i05: PV 1 - Leistung" | |
| id: sensor_pv_power_in_1_1 | |
| state_topic: b2500/1/pv1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i15: PV 2 - Leistung" | |
| id: sensor_pv_power_in_1_2 | |
| state_topic: b2500/1/pv2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i50: Füllstand der Batterie in Prozent" | |
| id: sensor_bat_remain_1 | |
| state_topic: b2500/1/battery/remaining_percent | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i51: Füllstand der Batterie in Wh" | |
| id: sensor_bat_capacity_1 | |
| state_topic: b2500/1/battery/remaining_capacity | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i25: Ausgang 1 - Leistung" | |
| id: sensor_power_out_1_1 | |
| state_topic: b2500/1/power1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i35: Ausgang 2 - Leistung" | |
| id: sensor_power_out_1_2 | |
| state_topic: b2500/1/power2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "A1-t59: Geräte Version" | |
| id: sensor_device_version_1 | |
| state_topic: b2500/1/device/fw_version | |
| accuracy_decimals: 2 | |
| - platform: template | |
| name: "D2-i05: PV 1 - Leistung" | |
| id: sensor_pv_power_in_2_1 | |
| state_topic: b2500/2/pv1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i15: PV 2 - Leistung" | |
| id: sensor_pv_power_in_2_2 | |
| state_topic: b2500/2/pv2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i50: Füllstand der Batterie in Prozent" | |
| id: sensor_bat_remain_2 | |
| state_topic: b2500/2/battery/remaining_percent | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i51: Füllstand der Batterie in Wh" | |
| id: sensor_bat_capacity_2 | |
| state_topic: b2500/2/battery/remaining_capacity | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i25: Ausgang 1 - Leistung " | |
| id: sensor_power_out_2_1 | |
| state_topic: b2500/2/power1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i35: Ausgang 2 - Leistung " | |
| id: sensor_power_out_2_2 | |
| state_topic: b2500/2/power2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "A2-t59: Geräte Version" | |
| id: sensor_device_version_2 | |
| state_topic: b2500/2/device/fw_version | |
| accuracy_decimals: 2 | |
| - platform: ble_client | |
| ble_client_id: bc2500_1 | |
| internal: True | |
| type: characteristic | |
| name: "infoX2a" | |
| id: infoX2a | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff02' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse).execute(1,tData); | |
| return (float)x[0]; | |
| - platform: ble_client | |
| ble_client_id: bc2500_2 | |
| internal: True | |
| type: characteristic | |
| name: "infoX2b" | |
| id: infoX2b | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff02' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse).execute(2,tData); | |
| return (float)x[0]; | |
| ### power zero - mqtt grid power sensor ( any who publish the grid power to mqtt - defined in secrets,yaml ) | |
| - platform: mqtt_subscribe | |
| name: "MQTT: Grid Power" | |
| id: mqtt_grid_power | |
| topic: !secret mqtt_grid_power | |
| on_value: | |
| then: | |
| - script.execute: power_zero | |
| ###test | |
| - platform: ble_client | |
| ble_client_id: bc2500_1 | |
| internal: True | |
| type: characteristic | |
| name: "infoX6a" | |
| id: infoX6a | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff06' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse_test).execute(1,tData); | |
| return (float)x[0]; | |
| - platform: ble_client | |
| ble_client_id: bc2500_2 | |
| internal: True | |
| type: characteristic | |
| name: "infoX6b" | |
| id: infoX6b | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff06' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse_test).execute(1,tData); | |
| return (float)x[0]; | |
| script: | |
| # ble communication | |
| # | |
| # action ( 00f1 ) | |
| # | |
| # head = 0x73 | |
| # length = len(paket) | |
| # cntl = 0x23 | |
| # cmd = 0x02 set Region 1Byte (0x00 = EU / 0x01 = China / 0x02 = Non-EU) | |
| # = 0x03 runtimeInfo 1Byte (0x01) | |
| # = 0x04 DeviceInfo 1Byte (0x01) | |
| # = 0x0B DOD 1Byte (0-100) | |
| # = 0x0C Entladeschwelle 2Byte (0-500) | |
| # = 0x0D PV2-Passtrough 1Byte (0x00 on / 0x01 off) | |
| # = 0x0E PowerOut 1Byte (0x00 1-2 off / 0x01 1 on / 0x02 2 on / 0x03 1-2 on) | |
| # | |
| # = 0x05 Wifi-Config xByte ( ssid<.,.>pwd ) | |
| # = 0x08 Wifi-State 1Byte (0x01) ???? | |
| # | |
| # q&d c&p - more details will be added, maybe ... | |
| # = 0x14 set AWS MQTT xByte ( url<.,.>Port ) .... | |
| # = 0x60 set MQTT Certs xByte ( 0x00 = client.key / 0x01 = client.crt / 0x02 = ca.crt + cert len ) | |
| # = 0x61 trans MQTT Certs xByte ( jeweils 128bytes des certs ) | |
| # = 0x62 end MQTT Certs xByte ( ) | |
| # | |
| # testing / notes | |
| # = 0x01 Debug ?!?! 1Byte (0x00 = off / 0x01 = on) - enables QBLEGATTSNOTIFY notify 1 / 81 ( entspricht ~ runtimeinfo ) | |
| # = 0x06 | |
| # = 0x07 | |
| # = 0x09 | |
| # = 0x0A | |
| # = 0x0E HW-RESET ????? / send before head 0XAA ( deactivate output ??? ) | |
| # = 0x0F new in fw 131 1Byte ( 0x01 ) | |
| # | |
| # = 0x30 found in logs ... unknown parm 0x01 ???? answers since fw 131 | |
| # = 0x14 maybe not for mqtt ... set localtime ??? for auth/certs/challenge requests ????? ( query/set wifi depends ????) | |
| # | |
| # data = xx xx xx xx xx xx .... / depends on cmd | |
| # crc = xor len(paket) - 1 | |
| # | |
| # | |
| # responses ( ff02 ): | |
| # | |
| # head = 0x73 | |
| # length = len(paket) | |
| # cntl = 0x23 | |
| # cmd = cmd | |
| # data = xx xx xx xx xx .... | |
| # | |
| # | |
| # | |
| ################ maybe direct for arm | |
| # send ( ff01 ) | |
| # | |
| # head1 = 0xAA | |
| # head2(?) = 0x55 ( not length ?!?!? ) | |
| # cmd = 1x / 2x / 3x ( flash - 30 "open"/ 31 - write / 32 "close" ) / 5x | |
| # data = xx xx xx xx xx .... | |
| # crc = xor len(paket) -1 | |
| # | |
| ################ maybe direct for bms | |
| # send/receive ( ff06 ) | |
| # | |
| # head = 0xAA | |
| # len = 0x05/0x03 | |
| # data = xx xx xxx ( xx xx ) | |
| # crc = x1 + x2 + ... + xn | |
| # | |
| # | |
| # | |
| # -> aa 05 01 00 01 01 00 08 | |
| # <- aa 01 00 01 | |
| # | |
| # -> aa 05 01 00 01 00 00 07 | |
| # <- aa 01 00 01 | |
| # | |
| - id: ble_command_simple | |
| parameters: | |
| ble_device_nr: int | |
| ble_cmd: int | |
| ble_cmd_parm: int | |
| then: | |
| - logger.log: | |
| format: "ble command parse: %i [%i] %i" | |
| args: [ 'ble_device_nr','ble_cmd','ble_cmd_parm' ] | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff01' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| if (ble_cmd == 0x0C) { | |
| rdat1.push_back((uint8_t)((ble_cmd_parm >> 0) & 0xFF)); | |
| rdat1.push_back((uint8_t)((ble_cmd_parm >> 8) & 0xFF)); | |
| } else { | |
| rdat1.push_back((unsigned char)ble_cmd_parm); | |
| } | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat1; | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff01' | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| if (ble_cmd == 0x0C) { | |
| rdat2.push_back((uint8_t)((ble_cmd_parm >> 0) & 0xFF)); | |
| rdat2.push_back((uint8_t)((ble_cmd_parm >> 8) & 0xFF)); | |
| } else { | |
| rdat2.push_back((unsigned char)ble_cmd_parm); | |
| } | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat2; | |
| - id: ble_command_string | |
| parameters: | |
| ble_device_nr: int | |
| ble_cmd: int | |
| ble_cmd_parm: string | |
| then: | |
| - logger.log: | |
| format: "ble command parse: %i [%i]" | |
| args: [ 'ble_device_nr','ble_cmd'] | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff01' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| for (auto b : ble_cmd_parm) { | |
| rdat1.push_back((unsigned char)b); | |
| } | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat1; | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff01' | |
| #service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| #characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| for (auto b : ble_cmd_parm) { | |
| rdat2.push_back((unsigned char)b); | |
| } | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat2; | |
| - id: ble_set_time | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff01' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1{ 0x73,0x0d,0x23,0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00 }; | |
| auto time = id(sntp_time).now(); | |
| rdat1.at(4) = time.year - 1900; | |
| rdat1.at(5) = time.month; | |
| rdat1.at(6) = time.day_of_month; | |
| rdat1.at(7) = time.hour; | |
| rdat1.at(8) = time.minute; | |
| rdat1.at(9) = time.second + 1; | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat1; | |
| - globals.set: | |
| id: ble_1_initialized | |
| value: '1' | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff01' | |
| #service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| #characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2{ 0x73,0x0d,0x23,0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00 }; | |
| auto time = id(sntp_time).now(); | |
| rdat2.at(4) = time.year - 1900; | |
| rdat2.at(5) = time.month; | |
| rdat2.at(6) = time.day_of_month; | |
| rdat2.at(7) = time.hour; | |
| rdat2.at(8) = time.minute; | |
| rdat2.at(9) = time.second + 1; | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat2; | |
| - globals.set: | |
| id: ble_2_initialized | |
| value: '1' | |
| - id: ble_command_raw_06 | |
| parameters: | |
| ble_device_nr: int | |
| ble_cmd_parm: char[] | |
| then: | |
| - logger.log: | |
| format: "ble command parse (raw): %i" | |
| args: [ 'ble_device_nr'] | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff06' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff06-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1; | |
| for (auto b : ble_cmd_parm) { | |
| rdat1.push_back((unsigned char)b); | |
| } | |
| /* | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| */ | |
| //if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND raw", "%x - %i - %c", b,b,b); | |
| } | |
| //} | |
| return rdat1; | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff06' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff06-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2; | |
| for (auto b : ble_cmd_parm) { | |
| rdat2.push_back((unsigned char)b); | |
| } | |
| /* | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| */ | |
| //if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND raw", "%x - %i - %c", b,b,b); | |
| } | |
| //} | |
| return rdat2; | |
| - id: ble_process | |
| then: | |
| - if: | |
| condition: | |
| - lambda: 'return (id(ble_1_connected) && id(ble_1_initialized));' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query | |
| ble_device_nr: 1 | |
| - script.wait: ble_runtime_query | |
| ### query cmd30 if firmware > 1.30 | |
| - if: | |
| condition: | |
| - lambda: 'return (id(sensor_device_version_1).state * 100 > 130);' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query30 | |
| ble_device_nr: 1 | |
| - script.wait: ble_runtime_query30 | |
| - script.execute: | |
| id: ble_runtime_query0F | |
| ble_device_nr: 1 | |
| - script.wait: ble_runtime_query0F | |
| ### query deviceinfo if empty | |
| - if: | |
| condition: | |
| - lambda: 'return (id(txt_A03_1).state == "");' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: 1 | |
| ble_cmd: 0x04 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - if: | |
| condition: | |
| - lambda: 'return (id(ble_2_connected) && id(ble_2_initialized));' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query | |
| ble_device_nr: 2 | |
| - script.wait: ble_runtime_query | |
| ### query cmd30 if firmware > 1.30 | |
| - if: | |
| condition: | |
| - lambda: 'return (id(sensor_device_version_2).state * 100 > 130);' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query30 | |
| ble_device_nr: 2 | |
| - script.wait: ble_runtime_query30 | |
| - script.execute: | |
| id: ble_runtime_query0F | |
| ble_device_nr: 2 | |
| - script.wait: ble_runtime_query0F | |
| ### query deviceinfo if empty | |
| - if: | |
| condition: | |
| - lambda: 'return (id(txt_A03_2).state == "");' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: 2 | |
| ble_cmd: 0x04 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_runtime_query | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - logger.log: | |
| format: "runtime query: %i" | |
| args: [ 'ble_device_nr' ] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x03 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_runtime_query30 | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - logger.log: | |
| format: "runtime query 30: %i" | |
| args: [ 'ble_device_nr' ] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x30 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_runtime_query0F | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - logger.log: | |
| format: "runtime query 0F: %i" | |
| args: [ 'ble_device_nr' ] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0F | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_powerout | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - lambda: |- | |
| int ble_cmd_t = 0x00; | |
| if ( ble_device_nr == 1 ) { | |
| if ( ! id(switch_powerout_1_1).state && ! id(switch_powerout_1_2).state ) { ble_cmd_t = 0x00; } | |
| if ( id(switch_powerout_1_1).state && ! id(switch_powerout_1_2).state ) { ble_cmd_t = 0x01; } | |
| if ( ! id(switch_powerout_1_1).state && id(switch_powerout_1_2).state ) { ble_cmd_t = 0x02; } | |
| if ( id(switch_powerout_1_1).state && id(switch_powerout_1_2).state ) { ble_cmd_t = 0x03; } | |
| } | |
| if ( ble_device_nr == 2 ) { | |
| if ( ! id(switch_powerout_2_1).state && ! id(switch_powerout_2_2).state ) { ble_cmd_t = 0x00; } | |
| if ( id(switch_powerout_2_1).state && ! id(switch_powerout_2_2).state ) { ble_cmd_t = 0x01; } | |
| if ( ! id(switch_powerout_2_1).state && id(switch_powerout_2_2).state ) { ble_cmd_t = 0x02; } | |
| if ( id(switch_powerout_2_1).state && id(switch_powerout_2_2).state ) { ble_cmd_t = 0x03; } | |
| } | |
| id(ble_command_simple).execute(ble_device_nr,0x0E,ble_cmd_t); | |
| if (ble_cmd_t == 0x00) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 OFF / 2 OFF"); } | |
| if (ble_cmd_t == 0x01) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 ON / 2 OFF"); } | |
| if (ble_cmd_t == 0x02) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 OFF / 2 ON"); } | |
| if (ble_cmd_t == 0x03) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 ON / 2 ON"); } | |
| - id: ble_passthrough | |
| parameters: | |
| ble_device_nr: int | |
| switch_cmd: bool | |
| then: | |
| - logger.log: | |
| format: "PV2 Passthrough %i : %i" | |
| args: [ble_device_nr,switch_cmd] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0D | |
| ble_cmd_parm: !lambda return switch_cmd; | |
| - id: ble_set_dod | |
| parameters: | |
| ble_device_nr: int | |
| dod: int | |
| then: | |
| - logger.log: | |
| format: "set DOD: %i" | |
| args: [ 'dod' ] | |
| - if: | |
| condition: | |
| lambda: 'return ( dod <= 100 && dod >= 10);' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0B | |
| ble_cmd_parm: !lambda return dod; | |
| - id: ble_set_discharge_treshold | |
| parameters: | |
| ble_device_nr: int | |
| discharge: int | |
| then: | |
| - logger.log: | |
| format: "set discharge level: %i" | |
| args: [ 'discharge' ] | |
| - if: | |
| condition: | |
| lambda: 'return ( discharge <= 500 && discharge >= 1);' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0C | |
| ble_cmd_parm: !lambda return discharge; | |
| - id: ble_notify_parse_test | |
| parameters: | |
| ble_device_nr: int | |
| x: char[] | |
| then: | |
| - logger.log: | |
| format: "runtime parse: %i" | |
| args: [ 'ble_device_nr' ] | |
| - lambda: |- | |
| //if (id(internal_console_dbg)) { | |
| ESP_LOGD("parse test", "x[3] = %i", x[3]); | |
| for (auto b : x) { | |
| ESP_LOGD("data test", "%.2x \t %i \t %c", b,b,b); | |
| } | |
| //} | |
| - id: ble_notify_parse | |
| parameters: | |
| ble_device_nr: int | |
| x: char[] | |
| then: | |
| - logger.log: | |
| format: "runtime parse: %i" | |
| args: [ 'ble_device_nr' ] | |
| - lambda: |- | |
| ESP_LOGD("notify_parse", "Device: %i", ble_device_nr); | |
| if (id(internal_console_dbg)) { | |
| ESP_LOGD("parse", "x[3] = %i", x[3]); | |
| for (auto b : x) { | |
| ESP_LOGD("data", "%.2x \t %i \t %c", b,b,b); | |
| } | |
| } | |
| if (id(switch_debug_hexdump).state == true) { | |
| ESP_LOG_BUFFER_HEXDUMP("hexdump", &x[0], x.size(), ESP_LOG_ERROR); | |
| } | |
| if ((std::count (x.begin(), x.end(), '_') == 16) || (std::count (x.begin(), x.begin() + 10, '_') == 3)) | |
| { | |
| ESP_LOGD("main", "Data: cmd 0x0F"); | |
| int pos = 0; | |
| int soc = 0; | |
| int t1 = 0; | |
| int t2 = 0; | |
| float cv = 0.0; | |
| float cmin = std::numeric_limits<float>::max(); | |
| float cmax = std::numeric_limits<float>::min(); | |
| float ct = 0.0; | |
| int found = -1; | |
| char delimiter = '_'; | |
| std::string xstr; | |
| std::vector<float> cellV; | |
| xstr.assign(x.begin(), x.end()); // copy values from vector into string xstr, deep copy | |
| xstr = xstr + delimiter; // append delimiter to xstr | |
| found = xstr.find(delimiter); // search for position of the first delimiter | |
| while (found != -1) // loop until no more delimiter found | |
| { | |
| if(pos == 0) soc = atoi( xstr.substr(0, found).c_str()); // pos 0 don't care | |
| if(pos == 1) t1 = atoi( xstr.substr(0, found).c_str()); // pos 1 get int value of temperature sensor 1 | |
| if(pos == 2) t2 = atoi( xstr.substr(0, found).c_str()); // pos 2 get int value of temperature sensor 2 | |
| if((pos >= 3) && (pos <= 16)) // pos 3-16 parse pos for the 14 cell voltages | |
| { | |
| ct = atof( xstr.substr(0, found).c_str()); // get float value of pos x | |
| cellV.push_back(ct); | |
| //ESP_LOGD("cell voltage", ct.c_str()); | |
| cv += ct; // add actual value to var cv | |
| if(ct > cmax) cmax = ct; // check for higher value as stored in cmax | |
| if(ct < cmin) cmin = ct; // check for lower value as stored in cmin | |
| } | |
| xstr.erase(xstr.begin(), xstr.begin() + found + 1); // remove parsed string part | |
| found = xstr.find(delimiter); // find next delimiter | |
| pos++; // increment pos | |
| } | |
| /* calculate SoC from cell voltages | |
| cell empty = 3.0 Volt = 0% SoC | |
| cell full = 3.5 Volt = 100% SoC | |
| */ | |
| // float soccalc = (cv/14000 - 3.0) * 200; | |
| float lowlimit = 3.0; // low voltage limit | |
| float highlimit = 3.5; // high voltage limit | |
| float soccalc = 100*((cv/14000) | |
| - highlimit)/(highlimit - lowlimit) + 100; // equation of line with two points (0,lowlimit) (100,highlimit) | |
| ESP_LOGD("cellVoltage","soc: %i, temp1: %i, temp2: %i",soc,t1,t2); | |
| ESP_LOGD("cellVoltage","cell01: %.f, cell 02: %.f, cell 03: %.f, cell 04: %.f", cellV[0], cellV[1], cellV[2], cellV[3]); | |
| ESP_LOGD("cellVoltage","cell05: %.f, cell 06: %.f, cell 07: %.f, cell 08: %.f", cellV[4], cellV[5], cellV[6], cellV[7]); | |
| ESP_LOGD("cellVoltage","cell09: %.f, cell 10: %.f, cell 11: %.f, cell 12: %.f", cellV[8], cellV[9], cellV[10], cellV[11]); | |
| ESP_LOGD("cellVoltage","cell13: %.f, cell 14: %.f", cellV[12], cellV[13]); | |
| char mtopic[48]; | |
| for (int i=0; i<14; i++) { | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/%02d/voltage",ble_device_nr,i+1); | |
| //ESP_LOGD("cellVoltageX","%s : %f", mtopic, cellV[i]); | |
| id(mqtt_client).publish(mtopic,to_string(cellV[i]/1000)); | |
| } | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/voltage",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cv/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cmin",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cmin/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cmax",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cmax/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cavg",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cv/14000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cdiff",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string((cmax-cmin)/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/soccalc",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(soccalc)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/temp1",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(t1)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/temp2",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(t2)); | |
| /* | |
| id(bcsoc).publish_state(soc); // SOC from device (%) | |
| id(bcsoccalc).publish_state(soccalc); // SOC calculated from cell voltages (%) | |
| id(bctemp1).publish_state(t1); // Temperature 1 (°C) | |
| id(bctemp2).publish_state(t2); // Temperature 2 (°C) | |
| id(bccvsum).publish_state(cv/1000); // sum of cellvoltages = battery Voltage(V) | |
| id(bccvmin).publish_state(cmin/1000); // lowest cellvoltage (V) | |
| id(bccvmax).publish_state(cmax/1000); // highest cellvoltage (V) | |
| id(bccvdiff).publish_state((cmax-cmin)/1000); | |
| id(bccvavg).publish_state(cv/14000); // avarage cellvoltage (V) | |
| */ | |
| } | |
| else if (x[3] == 0x03) { | |
| ESP_LOGD("main", "Data: runtimeInfo "); | |
| //sensor | |
| // pv_level 1 und 2 | |
| /* | |
| [6][7] PV-Eingangsleistung 1 (2Byte) | |
| [8][9] PV-Eingangsleistung 2 (2Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int pvPower1 = x[6] | x[7] << 8; | |
| int pvPower2 = x[8] | x[9] << 8; | |
| if (ble_device_nr==1) { id(sensor_pv_power_in_1_1).publish_state(pvPower1); id(sensor_pv_power_in_1_2).publish_state(pvPower2); } | |
| if (ble_device_nr==2) { id(sensor_pv_power_in_2_1).publish_state(pvPower1); id(sensor_pv_power_in_2_2).publish_state(pvPower2); } | |
| // Batterie Stand in % | |
| /* | |
| [10][11] Verbleibende Batteriekapazität in Prozent (2Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int batRemain = x[10] | x[11] << 8 ; | |
| if (ble_device_nr==1) { id(sensor_bat_remain_1).publish_state(batRemain / 10); } | |
| if (ble_device_nr==2) { id(sensor_bat_remain_2).publish_state(batRemain / 10); } | |
| // Entladen bei weniger als ??? Watt PV Eingang | |
| /* | |
| [19][20] Entladeschwelle(2Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int disCharge = x[19] | x[20] << 8; | |
| if (ble_device_nr==1) { id(sensor_discharge_treshold_1).publish_state(disCharge); } | |
| if (ble_device_nr==2) { id(sensor_discharge_treshold_2).publish_state(disCharge); } | |
| // Füllstand des Akkus in Wh | |
| /* | |
| [22][23] Gesamtkapazität der Batterie (1Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int batCapacity = x[22] | x[23] << 8; | |
| if (ble_device_nr==1) { id(sensor_bat_capacity_1).publish_state(batCapacity); } | |
| if (ble_device_nr==2) { id(sensor_bat_capacity_2).publish_state(batCapacity); } | |
| // Ausgangsleistung in Watt | |
| /* | |
| [24][25] Ausgangsleistung 1(1Byte) | |
| [26][27] Ausgangsleistung 2(1Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int powerOut1 = x[24] | x[25] << 8; | |
| int powerOut2 = x[26] | x[27] << 8; | |
| if (ble_device_nr==1) { id(sensor_power_out_1_1).publish_state(powerOut1); id(sensor_power_out_1_2).publish_state(powerOut2); } | |
| if (ble_device_nr==2) { id(sensor_power_out_2_1).publish_state(powerOut1); id(sensor_power_out_2_2).publish_state(powerOut2); } | |
| // Geräte Version ( Firmware ? ) | |
| /* | |
| [12] B2500 Geräteversion (1Byte) | |
| 0-255 ( ~ anzeige als /100 ) | |
| */ | |
| float dev_version = x[12]; | |
| if (ble_device_nr==1) { id(sensor_device_version_1).publish_state(dev_version / 100); } | |
| if (ble_device_nr==2) { id(sensor_device_version_2).publish_state(dev_version / 100); } | |
| // | |
| /* | |
| [18] Dod (1Byte) | |
| 0-100 Prozentualer Anteil der Entladeleistung an der Nennleistung | |
| */ | |
| int dod_level = x[18]; | |
| if (ble_device_nr==1) { id(sensor_dod_1).publish_state(dod_level); } | |
| if (ble_device_nr==2) { id(sensor_dod_2).publish_state(dod_level); } | |
| // binary sensor / bool | |
| // pv 1 und 2 in | |
| /* | |
| [x4] PV IN 1 Zustand (1Byte) | |
| [x5] PV IN 2 Zustand (1Byte) | |
| 0x00 （off） | |
| 0x01 （Aufladung） | |
| 0x02 （transparent für Wechselrichter） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[4] == 0x00 ) { id(bool_pv_active_1_1).publish_state(false);id(bool_pv_transparent_1_1).publish_state(false); } | |
| if( x[4] == 0x01 ) { id(bool_pv_active_1_1).publish_state(true); id(bool_pv_transparent_1_1).publish_state(false); } | |
| if( x[4] == 0x02 ) { id(bool_pv_active_1_1).publish_state(true); id(bool_pv_transparent_1_1).publish_state(true); } | |
| if( x[5] == 0x00 ) { id(bool_pv_active_1_2).publish_state(false);id(bool_pv_transparent_1_2).publish_state(false); } | |
| if( x[5] == 0x01 ) { id(bool_pv_active_1_2).publish_state(true); id(bool_pv_transparent_1_2).publish_state(false); } | |
| if( x[5] == 0x02 ) { id(bool_pv_active_1_2).publish_state(true); id(bool_pv_transparent_1_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[4] == 0x00 ) { id(bool_pv_active_2_1).publish_state(false);id(bool_pv_transparent_2_1).publish_state(false); } | |
| if( x[4] == 0x01 ) { id(bool_pv_active_2_1).publish_state(true); id(bool_pv_transparent_2_1).publish_state(false); } | |
| if( x[4] == 0x02 ) { id(bool_pv_active_2_1).publish_state(true); id(bool_pv_transparent_2_1).publish_state(true); } | |
| if( x[5] == 0x00 ) { id(bool_pv_active_2_2).publish_state(false);id(bool_pv_transparent_2_2).publish_state(false); } | |
| if( x[5] == 0x01 ) { id(bool_pv_active_2_2).publish_state(true); id(bool_pv_transparent_2_2).publish_state(false); } | |
| if( x[5] == 0x02 ) { id(bool_pv_active_2_2).publish_state(true); id(bool_pv_transparent_2_2).publish_state(true); } | |
| } | |
| // pv 2 durchleiten | |
| /* | |
| [13] Einstellung des Ladevorgangs (1Byte) | |
| 0x00 （PV1 Aufladung PV2 Durchleitung） | |
| 0x01 （Volles Laden und Entladen） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[13] == 0x00 ) { id(switch_pv2_passthrough_1).turn_on(); } | |
| if( x[13] == 0x01 ) { id(switch_pv2_passthrough_1).turn_off(); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[13] == 0x00 ) { id(switch_pv2_passthrough_2).turn_on(); } | |
| if( x[13] == 0x01 ) { id(switch_pv2_passthrough_2).turn_off(); } | |
| } | |
| // RESERVED ( wifi / mqtt ) | |
| /* | |
| [15] Reserve(1Byte) | |
| 0x00 wifi funktioniert nicht | |
| 0x01 wifi ok, mqtt nicht verbunden | |
| 0x02 wifi ok, mqtt connect ok | |
| ??? 0x03 wifi ok, mqtt1 connect ok, mqtt2 connect ok | |
| maybe wifi / mqtt | |
| 00 = false / false | |
| 01 = true / false | |
| 02 = false / true | |
| 03 = true / true | |
| ------- | |
| first part means not wifi connected ?!?!? | |
| 00 = ??? / mqtt not connected | |
| 01 = ??? / mqtt not connected | |
| 02 = ??? / mqtt connected | |
| 03 = ??? / mqtt connected | |
| */ | |
| // wifi and mqtt, 03 maybe webserver | |
| if (ble_device_nr==1) { | |
| if( x[15] == 0x00 ) { id(bool_wifi_ok_1).publish_state(false); id(bool_mqtt1_ok_1).publish_state(false); } | |
| if( x[15] == 0x01 ) { id(bool_wifi_ok_1).publish_state(true); id(bool_mqtt1_ok_1).publish_state(false);} | |
| if( x[15] == 0x02 ) { id(bool_wifi_ok_1).publish_state(false); id(bool_mqtt1_ok_1).publish_state(true); } | |
| if( x[15] == 0x03 ) { id(bool_wifi_ok_1).publish_state(true); id(bool_mqtt1_ok_1).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[15] == 0x00 ) { id(bool_wifi_ok_2).publish_state(false); id(bool_mqtt1_ok_2).publish_state(false); } | |
| if( x[15] == 0x01 ) { id(bool_wifi_ok_2).publish_state(true); id(bool_mqtt1_ok_2).publish_state(false); } | |
| if( x[15] == 0x02 ) { id(bool_wifi_ok_2).publish_state(false); id(bool_mqtt1_ok_2).publish_state(true); } | |
| if( x[15] == 0x03 ) { id(bool_wifi_ok_2).publish_state(true); id(bool_mqtt1_ok_2).publish_state(true); } | |
| } | |
| // power 1 und 2 enabled/disabled | |
| /* | |
| [14] Entlade-Modus / Enabled (1Byte) | |
| 0x00 OUT1&OUT2 Sperren | |
| 0x01 nur OUT1 Freigabe | |
| 0x02 nur OUT2 Freigabe | |
| 0x03 OUT1&OUT2 Freigabe | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[14] == 0x00 ) { id(switch_powerout_1_1).turn_off(); id(switch_powerout_1_2).turn_off();} | |
| if( x[14] == 0x01 ) { id(switch_powerout_1_1).turn_on(); id(switch_powerout_1_2).turn_off();} | |
| if( x[14] == 0x02 ) { id(switch_powerout_1_1).turn_off(); id(switch_powerout_1_2).turn_on(); } | |
| if( x[14] == 0x03 ) { id(switch_powerout_1_1).turn_on(); id(switch_powerout_1_2).turn_on(); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[14] == 0x00 ) { id(switch_powerout_2_1).turn_off(); id(switch_powerout_2_2).turn_off();} | |
| if( x[14] == 0x01 ) { id(switch_powerout_2_1).turn_on(); id(switch_powerout_2_2).turn_off();} | |
| if( x[14] == 0x02 ) { id(switch_powerout_2_1).turn_off(); id(switch_powerout_2_2).turn_on(); } | |
| if( x[14] == 0x03 ) { id(switch_powerout_2_1).turn_on(); id(switch_powerout_2_2).turn_on(); } | |
| } | |
| // power 1 und 2 active | |
| /* | |
| [16] Ausgang Port 1 Status (1Byte) | |
| [17] Ausgang Port 2 Status (1Byte) | |
| 0x00（Aus） | |
| 0x01（Entladung） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[16] == 0x00 ) { id(bool_power_active_1_1).publish_state(false);} | |
| if( x[16] == 0x01 ) { id(bool_power_active_1_1).publish_state(true); } | |
| if( x[17] == 0x00 ) { id(bool_power_active_1_2).publish_state(false);} | |
| if( x[17] == 0x01 ) { id(bool_power_active_1_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[16] == 0x00 ) { id(bool_power_active_2_1).publish_state(false);} | |
| if( x[16] == 0x01 ) { id(bool_power_active_2_1).publish_state(true); } | |
| if( x[17] == 0x00 ) { id(bool_power_active_2_2).publish_state(false);} | |
| if( x[17] == 0x01 ) { id(bool_power_active_2_2).publish_state(true); } | |
| } | |
| // zusatzakku 1 und 2 | |
| /* | |
| [28] Ist Netzgerät 1 angeschlossen (1Byte) | |
| [29] Ist Netzgerät 2 angeschlossen (1Byte) | |
| 0x00（Kein Akkupack angeschlossen） | |
| 0x01（Verbinden Sie das Netzteil） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[28] == 0x00 ) { id(bool_extern_connected_1_1).publish_state(false);} | |
| if( x[28] == 0x01 ) { id(bool_extern_connected_1_1).publish_state(true); } | |
| if( x[29] == 0x00 ) { id(bool_extern_connected_1_2).publish_state(false);} | |
| if( x[29] == 0x01 ) { id(bool_extern_connected_1_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[28] == 0x00 ) { id(bool_extern_connected_2_1).publish_state(false);} | |
| if( x[28] == 0x01 ) { id(bool_extern_connected_2_1).publish_state(true); } | |
| if( x[29] == 0x00 ) { id(bool_extern_connected_2_2).publish_state(false);} | |
| if( x[29] == 0x01 ) { id(bool_extern_connected_2_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==1) { | |
| auto call_21 = id(txt_scene_1).make_call(); | |
| if( x[21] == 0x00 ) { call_21.set_value("Tag"); } | |
| if( x[21] == 0x01 ) { call_21.set_value("Nacht"); } | |
| if( x[21] == 0x02 ) { call_21.set_value("Morgens/Abends"); } | |
| call_21.perform(); | |
| } | |
| if (ble_device_nr==2) { | |
| auto call_21 = id(txt_scene_2).make_call(); | |
| if( x[21] == 0x00 ) { call_21.set_value("Tag"); } | |
| if( x[21] == 0x01 ) { call_21.set_value("Nacht"); } | |
| if( x[21] == 0x02 ) { call_21.set_value("Morgens/Abends"); } | |
| call_21.perform(); | |
| } | |
| if (ble_device_nr==1) { | |
| auto call_30 = id(txt_region_1).make_call(); | |
| if( x[30] == 0x00 ) { call_30.set_value("EU"); } | |
| if( x[30] == 0x01 ) { call_30.set_value("China"); } | |
| if( x[30] == 0x02 ) { call_30.set_value("non-EU"); } | |
| call_30.perform(); | |
| } | |
| if (ble_device_nr==2) { | |
| auto call_30 = id(txt_region_2).make_call(); | |
| if( x[30] == 0x00 ) { call_30.set_value("EU"); } | |
| if( x[30] == 0x01 ) { call_30.set_value("China"); } | |
| if( x[30] == 0x02 ) { call_30.set_value("non-EU"); } | |
| call_30.perform(); | |
| } | |
| } | |
| else if (x[3] == 0x04) { | |
| ESP_LOGD("main", "Data: deviceInfo "); | |
| //for (auto b : x) { | |
| // ESP_LOGD("data", "%i", b); | |
| //} | |
| // 's<#?type=<5>,id=<24>,mac=<12>t' | |
| // ESP_LOGD("data", "%s", vType); | |
| int data_len = x.size(); | |
| unsigned char vType[8]; | |
| for (int i=9;i<14;i++) { | |
| vType[i-9] = x[i]; | |
| } | |
| vType[5] = 0x00; | |
| unsigned char vID[32]; | |
| for (int i=18;i<42;i++) { | |
| vID[i-18] = x[i]; | |
| } | |
| vID[24]=0x00; | |
| unsigned char vMac[16]; | |
| for (int i=47;i<59;i++) { | |
| vMac[i-47] = x[i]; | |
| } | |
| vMac[12] = 0x00; | |
| ESP_LOGD("deviceInfo", "%i: %s [%s] %s", data_len,vType,vMac,vID); | |
| std::string sType(reinterpret_cast<char*>(vType)); | |
| std::string sID(reinterpret_cast<char*>(vID)); | |
| std::string sMac(reinterpret_cast<char*>(vMac)); | |
| if (ble_device_nr==1) { id(txt_A01_1).publish_state(sType); id(txt_A02_1).publish_state(sID); id(txt_A03_1).publish_state(sMac); } | |
| if (ble_device_nr==2) { id(txt_A01_2).publish_state(sType); id(txt_A02_2).publish_state(sID); id(txt_A03_2).publish_state(sMac); } | |
| } | |
| // get wifi info - "admin mode" only | |
| else if (x[3] == 0x08) { | |
| ESP_LOGD("main", "Data: wifiInfo "); | |
| int data_len = x.size(); | |
| unsigned char vSSID[32]; | |
| for (int i=4;i<data_len-1;i++) { | |
| vSSID[i-4] = x[i]; | |
| } | |
| vSSID[data_len-5] = 0x00; | |
| ESP_LOGD("deviceInfo", "%i: %s", data_len,vSSID); | |
| std::string sSSID(reinterpret_cast<char*>(vSSID)); | |
| if (ble_device_nr==1) { id(txt_A11_1).publish_state(sSSID); } | |
| if (ble_device_nr==2) { id(txt_A11_2).publish_state(sSSID); } | |
| for (auto b : x) { | |
| ESP_LOGD("data", "%x \t %i \t %x", b,b,b); | |
| } | |
| } | |
| else if (x[3] == 0x30) { | |
| ESP_LOGD("main", "Data: cmd 0x30 "); | |
| int data_len = x.size(); | |
| int data_pos = 0; | |
| int rxor = 0; | |
| for (int i=0;i<data_len;i++) { | |
| rxor = rxor ^ x[i]; | |
| } | |
| /* | |
| //if( rxor != id(cmd30_xor_last_1) ) { | |
| ESP_LOGD("data 30 - raw" , "Device %i",ble_device_nr); | |
| ESP_LOGD("data 30 - raw" , "0x%.2x 0x%.2x 0x%.2x 0x%.2x", x[0], x[1], x[2], x[3]); | |
| for(int i=4;i<data_len-1;i++) { | |
| ESP_LOGD("data 30 - raw" , "0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x", x[i], x[i+1], x[i+2], x[i+3], x[i+4],x[i+5],x[i+6],x[i+7],x[i+8]); | |
| i += 8; | |
| } | |
| //ESP_LOGD("data 30 - raw" , " "); | |
| id(cmd30_xor_last_1) = rxor; | |
| //} | |
| */ | |
| } | |
| /* | |
| else if (x[3] == 0x30) { | |
| ESP_LOGD("main", "Data: cmd 0x30"); | |
| int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("data 30" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| } | |
| */ | |
| // debug ??? | |
| else if (x[3] == 0x01) { | |
| ESP_LOGD("main", "Data: cmd 0x01"); | |
| int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("data 01" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| } | |
| else if (x[3] == 0x81) { | |
| ESP_LOGD("main", "Data: cmd 0x81"); | |
| int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("data 81" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| } | |
| else { | |
| /*int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("unknown" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| */ | |
| ESP_LOG_BUFFER_HEXDUMP("hexdump", &x[0], x.size(), ESP_LOG_ERROR); | |
| } | |
| - id: power_zero | |
| then: | |
| ### Nulleinspeisung - Powerzero by neromatrix | |
| ### - mqtt only adaption by noone2k | |
| ### first attempt, use at your own risk ! | |
| ### Ver. 0.01m | |
| - lambda: |- | |
| if(id(switch_opendtu_limit).state) | |
| { | |
| int ptu_min_value = 5; | |
| int ptu_max_value = id(mqtt_opendtu_limit_max).state; // 50; // <- nax rel value -> id(npw2500_zeropower_max_powerlimit_rel).state; | |
| int ptu_limit = 0; | |
| int ptu_max_power = 900; // max:2 (x:4*2 for 4port using 2port) | |
| int grid_to_ptu_ratio = ptu_max_power/100; | |
| int grid_min_value = 20; | |
| static int ptu_old_limit = 0; | |
| /* | |
| <- actual power mqtt -> prev. int(id(npw2500_grid_power).state); | |
| keep over grid_min_value | |
| */ | |
| int grid_value = int(id(mqtt_grid_power).state) - grid_min_value;; | |
| ptu_limit = grid_value / grid_to_ptu_ratio + ptu_old_limit; | |
| if(ptu_limit > ptu_max_value) ptu_limit = ptu_max_value; | |
| if(ptu_limit < ptu_min_value) ptu_limit = ptu_min_value; | |
| // change only if diff more than +/-1% | |
| if ( ptu_limit - ptu_old_limit > 1 || ptu_old_limit - ptu_limit > 1 ) { | |
| ESP_LOGD("npw2500","PowerZero PTU old limit %d, PTU new limit %d, Grid value %d " ,ptu_old_limit, ptu_limit, grid_value); | |
| ptu_old_limit = ptu_limit; | |
| //char mtopic[64]; | |
| //snprintf(mtopic, 64,"openDTU/XXXXXXXXXXX/cmd/limit_persistent_relative"); | |
| //id(mqtt_client).publish(mtopic,to_string(ptu_limit)); | |
| id(mqtt_opendtu_limit).publish_state(ptu_limit); | |
| } | |
| } |
stimmt, die app zeigt VOR dem aufspielen nicht die neue versions-nummer ...
erst wenn se anfängt einzuspielen ...
wenn du bei 210 bist, sollte erstmal ein update auf 216 kommen ... was mit der 218 ist, weiss ich nicht ...
es gibt momentan 218.8 / 218.10 ( eigentlich release-versionen )...
es wurden dann aber noch 219.7 / 219.8 ( eigentlich testversionen ) nachgeschoben ...
ob irgendwas davon jetzt eine release ist ... oder test/beta ... welche, man sich also freischalten lassen kann/sollte, no idea ...
da heisst es dann erstmal abwarten und mit der 216.x fahren, bis es irgendwas offizielles gibt ...
Super,wiedermal vielen Dank!!
@noone2k webinterface aktiviert, lässt sich auch kompilieren, leider geht’s nicht und Daten werden nicht mehr gesendet an mqtt, wifi geht noch
ja, der multiplexing betrieb von bt+wifi ist nicht für den dualen/tripple betrieb von wifi( webinterface+mqtt ) +ble optimal.
die (dauerhafte) http verbindung zum browser ( webinterface mit callbacks) dürfte viel zeit für den slot-betrieb von ble schlucken.
habe mir das multiplexing prinzip nicht im detail angeschaut, aber üblicherweise nutzt man ein einfache timeslot-verfahren,
während eine pipe, die daten sammelt, für den nächsten rutsch.
aber per browser ist ineffizient ( http - request / response ) und blockiert alles andere ...
reines mqtt ( wifi/tcp ) und ble sollte größtenteils problemlos funktionieren, vllt. mal an der einen oder anderen stelle haken.
tut es ja auch ;)
vllt. kennt sich ja jmd hier mit den ganzen espressif modulen und boards soweit aus und weiss ad hook,
ob es modelle gibt, die kein multiplexing nutzen, sondern zwei getrennte demodulatoren und rf-wege hat
ohne das zwei chips/boards verwendet werden müssen 😁
ähnliches sieht man auch beim fc41d ( ähnliches prinzip wie der esp32 , nur arm statt xtensa , und afaik auch nur 1x rf ...)
also kurz: das webinterface würde ich aus performance gründen einfach rauswerfen ( bzw. ausdokumentieren ) ...
beim diag bspw. funktioniert das trotzdem relativ gut, weil die daten nicht zyklisch abgefragt werden und auch nicht per tcp/mqtt weiterverteilt ... sondern nur bei "bedarf" ( auf klick ) angefordert und angezeigt werden ...
Falls wer auch so ein "Problem" wie oben beschrieben hat, bei mir ging das Update erst als ich die Zusatzbatterie abgeschlossen hatte. Ein und Ausgänge waren abgeschlossen,aber es ging trotzdem nichts bei mir.
@noone2k Gestern wurde durch den fix der Timer1 abgeschaltet und der Bypass wurde aktiv, soweit alles wie es sein soll, nur wird der Timer nicht wieder automatisch aktiviert für den nächsten Tag, kannst du das bitte implementieren? Man denkt da ja nicht dran am nächsten Tag wenn der Speicher voll war
dieses fixes gehören eigentlich ( besser ) in ein smarthome-system.
bspw. aktiviere ich den timer darüber wieder.
die komplette separation von steuereinheit ( esp32 indiesem fall ) und logic ( dein smarthome ) ist die beste und flexibelste variante.
man muss nicht iedesmal die yaml für jeden (individuellen) zweck anpassen und compilieren, sondern nur seine persönliche smarthome-logic.
das aktivieren von timer 1 kannst du bspw. mit nem esphome timer für dich in der yaml realisieren
ODER (besser) in deinem smarthome-system.
schau ich mir ggf. nachher mal an, ansonsten schonmal was zum lesen für dich, falls du das selbst probieren willst:
esphome-variante:
https://esphome.io/components/time/#on-time-trigger
wenn es bspw. timer1 ist, denn du nutzt, machst "on time" mit diesem folgenden script.
habe mal schnell was zusammengetippert und die einrückungen passen ggf nicht ( ungetestet ) ...
on_time:
# Every day at 00:00:01
- seconds: 1
minutes: 0
hours: 0
then:
- script.execute:
id: ble_set_timer_enable
ble_device_nr: 1
timer: 1
enable: 1
ODER
smarthome ( esp32-mqtt-variante ):
topic: b2500v2/1/timer/1/enabled/set 1
in diesem zusammenhang sollte ich ggf. die fixes optional machen, denn nicht jeder braucht/will die oder kann sie für sich in seinem smarthome-system nachbauen ...
ich mach aber erstmal ne kleine pause ... heute wurde nen "neuer" v1 geliefert ( das eine gerät hat ne "problematische" zelle )...
aber der neue zickt momentan von anfang an rum ... werde mich später eher darauf konzentrieren und mal gucken...
aber erstmal in die küche und irgendwas zaubern ... habe gar nicht bekommen, das es schon wieder fast 1pm ist ...
Mal eine Frage ich bin von 216 auf 218 FW gegangen. Mir ist leider aufgefallen das es kein Entladen ab 100% gibt nur noch ein Bypass/Trans bis ca 10 Watt Eingang . Das ist ziemlich doof da ich den Speicher flexibel nutzen möchte kann das irgend wie ausgeschaltet werden ? So macht das für mich wenig Sinn finde ich und nervt. Kann ich die Firmware irgend wie selbst anstoßen ohne den Hame Support ?
Du willst wieder zurück ?
Dann schreibe im Benutzer Feedback der App dein Anliegen. Geht normalerweise innerhalb weniger Minuten.
@noone2k ok, klar kann mir ein Script für iobroker schreiben das den Timer wieder um sagen wir 0:00 Uhr aktiviert, dachte nur wenn im fix schon ausschalten drin ist, wäre es schön wenn aktivieren auch drin ist, das man da nicht durcheinander kommt welche Funktion wo geschaltet wird
Hallo guten Abend in die Runde,
mein System lief die letzten Monate sehr schön rund.
Plötzlich ist mir aufgefallen das die Batterie entlädt obwohl sie nur 15% hat?
Gibts diese Projekt nicht mehr?
https://gist.github.com/neromatrix/6ec812f35418c4b38ebbad4e92cac888
Ist da was an mir vorbeigezogen?
Danke
Gruß
Helmut
Habe die yaml jetzt mal bearbeitet das um 23:00 Uhr der Timer 1 wieder aktiviert wird mal sehen ob es klappt
Ja klappt das ist dann schonmal gut
muss mal schauen, warum das setzen der timer per mqtt nicht funtkioniert, wenn die zeit dafür übrig ist ...
sry. war/bin dieses wochenende anderweitig beschäftigt ...
u.a. heute mit nem "neuen" hmb ...
hatte da paar anlaufschwieirigkeiten, da das akku pack unter 10V war ... und musste extern etwas aufladen ...
wenn das akku pack zuniedrig ist, liefert das bms keine daten.
auch keine temperatur .... bzw. wird dann mit 0 grad interpretiert ....
d.h. der kann nicht laden ...
vllt. nur ein zufall, aber ich meine irgendwo gelesen zu haben, das die modelle jetzt eine 0°C ladeeinstellung bekommen sollen.
das hier wäre zumindestens eine logische erklärung, warum das erlaubt werden soll, zumindestens eine etwas sinnvollere,
als das aufeinmal ein heizpad aus dem nichts entsteht oder das der hersteller absichtlich eine obsoleszenz herbeiführen will 😁
das teil hat aber noch andere auffälligkeiten, wo ich mal nochmal etwas genauer schauen muss.
//edit, dazu nochmal ein kurzes errorlog ... und damit wäre die frage auch beantwortet,
ob da die ntc auch arbeiten bzw. einen effekt haben ... ( in der bei mir genutzten hw/fw kombi ... )
18:22:55 [I] [errorlog:1156] 0 - 1970-01-01 00:00:00 - Device startup : 0
18:22:55 [I] [errorlog:1156] 0 - 1970-01-01 00:00:00 - Device startup : 0
18:22:55 [I] [errorlog:1156] 51 - 1970-01-01 00:00:10 - BMS charging low-temperature protection : 0
18:22:55 [I] [errorlog:1156] 78 - 1970-01-01 00:00:24 - MQTT connection successful : 1
18:22:55 [I] [errorlog:1156] 86 - 2024-10-25 14:15:44 - HTTP POST error : 0
18:22:55 [I] [errorlog:1156] 0 - 1970-01-01 00:00:00 - Device startup : 0
18:22:55 [I] [errorlog:1156] 0 - 1970-01-01 00:00:00 - Device startup : 0
18:22:55 [I] [errorlog:1156] 42 - 1970-01-01 00:00:05 - Register notification undervoltage : 2
18:22:55 [I] [errorlog:1156] 78 - 1970-01-01 00:00:20 - MQTT connection successful : 1
18:22:55 [I] [errorlog:1156] 43 - 1970-01-01 00:00:20 - Under voltage condition enters sleep mode : 39141
18:22:55 [I] [errorlog:1156] 43 - 1970-01-01 00:00:15 - Under voltage condition enters sleep mode : 41170
18:22:55 [I] [errorlog:1156] 56 - 1970-01-01 00:00:05 - Start charging and learning : 0
18:22:55 [I] [errorlog:1156] 78 - 1970-01-01 00:00:25 - MQTT connection successful : 1
Hallo guten Abend in die Runde, mein System lief die letzten Monate sehr schön rund. Plötzlich ist mir aufgefallen das die Batterie entlädt obwohl sie nur 15% hat? Gibts diese Projekt nicht mehr? https://gist.github.com/neromatrix/6ec812f35418c4b38ebbad4e92cac888 Ist da was an mir vorbeigezogen?
Danke Gruß Helmut
Hallo Helmut,
da sich ja an unserer Akkusoftware nichts geändert hat, bestand keinerlei Notwendigkeit etwas zu ändern.
Sollten wir eine neue Version bekommen, werde ich mir das natürlich anschauen.
LG
Hi an alle !
Hab nochmal ne Frage an alle die per Netzgerät laden und zwar steckt ihr die Kabeln immer physikalisch um zum Laden oder habt ihr da so eine art zweipoligen Wechselschalter ?
Kann mir mal jemand sagen warum es bei fast jeder Abfrage zu diesen Warnings kommt. Ist da was faul ?
2024-11-12 19:01:21 b2500-1 [W][component:238]: Components should block for at most 30 ms.
2024-11-12 19:01:20 b2500-1 [W][component:237]: Component esp32_ble took a long time for an operation (53 ms).
2024-11-12 19:01:16 b2500-1 [W][ble_sensor:078]: Error reading char at handle 21, status=2
2024-11-12 19:01:15 b2500-1 handle error: do nothing :)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Das heißt ich muss wirklich alles abstöpseln um das Firmwareupdate zu machen ? Bin auf V210, welche ich dann bekomme weiß ich nicht,steht ja nur NEW da 😉