normandmickey · January 18, 2020 22:06 · bereska · Apr 10, 2019 · bereska · Apr 10, 2019
diff --git a/BTCPayServer on Raspiblitz b/BTCPayServer on Raspiblitz
 #Install Dot-Net for ARM
 cd /home/admin
 sudo apt-get -y install libunwind8 gettext
 wget https://download.visualstudio.microsoft.com/download/pr/9650e3a6-0399-4330-a363-1add761127f9/14d80726c16d0e3d36db2ee5c11928e4/dotnet-sdk-2.2.102-linux-arm.tar.gz
 wget https://download.visualstudio.microsoft.com/download/pr/9d049226-1f28-4d3d-a4ff-314e56b223c5/f67ab05a3d70b2bff46ff25e2b3acd2a/aspnetcore-runtime-2.2.1-linux-arm.tar.gz
 sudo mkdir /opt/dotnet
 sudo tar -xvf dotnet-sdk-2.2.102-linux-arm.tar.gz -C /opt/dotnet/
 sudo tar -xvf aspnetcore-runtime-2.2.1-linux-arm.tar.gz -C /opt/dotnet/
 sudo ln -s /opt/dotnet/dotnet /usr/local/bin
 dotnet --info

 #Install Nginx & Certbot
 sudo apt-get install nginx-full certbot -y

 #Install NBXplorer
 cd /home/admin
 git clone https://github.com/dgarage/NBXplorer.git
 cd NBXplorer
 ./build.sh

 #Create the NBXplorer system unit file
 sudo nano /etc/systemd/system/nbxplorer.service

 #copy and past the following code
 ## Start of nbxplorer service file ##
 [Unit]
 Description=NBXplorer daemon
 Requires=bitcoind.service
 After=bitcoind.service

 [Service]
 ExecStart=/usr/local/bin/dotnet "/home/admin/NBXplorer/NBXplorer/bin/Release/netcoreapp2.1/NBXplorer.dll" -c /home/admin/.nbxplorer/Main/settings.config
 User=admin
 Group=admin
 Type=simple
 PIDFile=/run/nbxplorer/nbxplorer.pid
 Restart=on-failure

 PrivateTmp=true
 ProtectSystem=full
 NoNewPrivileges=true
 PrivateDevices=true

 [Install]
 WantedBy=multi-user.target
 ## end of nbxplorer service file ##

 #reload the systemd daemon
 sudo systemctl daemon-reload

 #enable nbxplorer service
 sudo systemctl enable nbxplorer

 #start nbxplorer service
 sudo systemctl start nbxplorer

 #check to see if nbxplorer is running
 sudo systemctl status nbxplorer

 #add your Raspiblitz RPC credentials to the nbxplorer configuration settings
 nano /home/admin/.nbxplorer/Main/settings.config

 #Locate the "#By user name and password" section and uncomment these two lines and change the username and password.
 #the username is raspibolt and the password is what you set while installing raspiblitz
 btc.rpc.user=raspibolt
 btc.rpc.password=yourVerySecretPassword

 #restart nbxplorer
 sudo systemctl restart nbxplorer

 #Install BTCPayServer
 cd /home/admin
 git clone https://github.com/btcpayserver/btcpayserver.git
 cd btcpayserver
 ./build.sh

 #create the BTCPayServer system unit fil
 sudo nano /etc/systemd/system/btcpayserver.service

 #copy and past the following code
 ## Start of btcpayserver service file ##
 [Unit]
 Description=BtcPayServer daemon
 Requires=btcpayserver.service
 After=nbxplorer.service

 [Service]
 ExecStart=/usr/local/bin/dotnet run --no-launch-profile --no-build -c Release -p "/home/admin/btcpayserver/BTCPayServer/BTCPayServer.csproj" -- $@
 User=admin
 Group=admin
 Type=simple
 PIDFile=/run/btcpayserver/btcpayserver.pid
 Restart=on-failure

 [Install]
 WantedBy=multi-user.target
 ## End of BTCPayServer service file ##

 #reload the systemd daemon
 sudo systemctl daemon-reload

 #enable btcpayserver service
 sudo systemctl enable btcpayserver

 #start btcpayserver
 sudo systemctl start btcpayserver

 #check to see if btcpayserver is running
 sudo systemctl status btcpayserver

 #enable the LND rest interface on port 8080 
 cd /home/bitcoin/.lnd
 sudo nano lnd.conf

 #add the following line to the [Application Options] section
 restlisten=127.0.0.1:8080
 tlsextraip=0.0.0.0

 #backup existing TLS cert and key files
 sudo mv tls.cert tls.cert.backup
 sudo mv tls.key tls.key.backup

 #restarting lnd will generate new tls files
 sudo systemctl restart lnd

 #copy new tls.cert file to admin folder
 sudo cp tls.cert /home/admin/.lnd


 #update your btcpayserver settings
 nano /home/admin/.btcpayserver/Main/settings.config

 #make sure the following items are uncommented and correct.  Replace example.com with your domain name
 ### Global settings ###
 network=mainnet

 ### Server settings ###
 port=23000
 bind=127.0.0.1
 externalurl=https://btcpay.example.com

 ### NBXplorer settings ###
 BTC.explorer.url=http://127.0.0.1:24444/
 BTC.lightning=type=lnd-rest;server=https://127.0.0.1:8080/;macaroonfilepath=/home/admin/.lnd/data/chain/bitcoin/mainnet/admin.macaroon;certthumbprint=<paste your thumbprint here>

 #save file we will get the cert thumbprint next
 #get your cert thumbprint for BTCPayServer Lightning configuration
 cd /home/admin
 openssl x509 -noout -fingerprint -sha256 -inform pem -in ~/.lnd/tls.cert

 #copy thumbprint output to clipboard
 #replace thumbprint for lightning configuration
 sudo nano /home/admin/.btcpayserver/Main/settings.config

 #paste thumbprint at the end of this line
 BTC.lightning=type=lnd-rest;server=https://127.0.0.1:8080/;macaroonfilepath=/home/admin/.lnd/data/chain/bitcoin/mainnet/admin.macaroon;certthumbprint=<paste your thumbprint here>

 #restart btcpayserver 
 sudo systemctl restart btcpayserver

 #Get your SSL certification using certbot
 sudo certbot certonly --authenticator standalone -d btcpay.example.com --pre-hook "service nginx stop" --post-hook "service nginx start"


 #Open Port 80
 sudo ufw allow 80, 443

 #add reverse proxy for btcpayserver

 #remove default nginx configuration
 sudo rm /etc/nginx/sites-enabled/default

 #create the btcpayserver configuration 
 sudo nano /etc/nginx/sites-available/btcpayserver

 #Paste the following, make sure you change the domain name to yours

 server {
    listen 80 default_server;
    server_name _;
    return 301 https://$host$request_uri;
 }

 server {
  listen 443 ssl;
  server_name btcpay.example.com;
  ssl on;

  ssl_certificate /etc/letsencrypt/live/btcpay.example.com/fullchain.pem;
  ssl_certificate_key /etc/letsencrypt/live/btcpay.example.com/privkey.pem;
  ssl_session_timeout 1d;
  ssl_session_cache shared:SSL:50m;
  ssl_session_tickets off;
  ssl_protocols TLSv1.1 TLSv1.2;
  ssl_ciphers 'ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!3DES:!MD5:!PSK';
  ssl_prefer_server_ciphers on;
  ssl_stapling on;
  ssl_stapling_verify on;
  ssl_trusted_certificate /etc/letsencrypt/live/btcpay.example.com/chain.pem;

  location / {
    proxy_set_header Host $host;
    proxy_set_header X-Real-IP $remote_addr;
    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    proxy_set_header X-Forwarded-Proto $scheme;
    proxy_pass http://localhost:23000;
  }
 }

 #remove default nginx configuration
 sudo rm /etc/nginx/sites-enabled/default

 #add symlink for btcpayserver site
 sudo ln -s /etc/nginx/sites-available/btcpayserver /etc/nginx/sites-enabled/

 #restart nginx
 sudo systemctl restart nginx
	#Install Dot-Net for ARM
	cd /home/admin
	sudo apt-get -y install libunwind8 gettext
	wget https://download.visualstudio.microsoft.com/download/pr/9650e3a6-0399-4330-a363-1add761127f9/14d80726c16d0e3d36db2ee5c11928e4/dotnet-sdk-2.2.102-linux-arm.tar.gz
	wget https://download.visualstudio.microsoft.com/download/pr/9d049226-1f28-4d3d-a4ff-314e56b223c5/f67ab05a3d70b2bff46ff25e2b3acd2a/aspnetcore-runtime-2.2.1-linux-arm.tar.gz
	sudo mkdir /opt/dotnet
	sudo tar -xvf dotnet-sdk-2.2.102-linux-arm.tar.gz -C /opt/dotnet/
	sudo tar -xvf aspnetcore-runtime-2.2.1-linux-arm.tar.gz -C /opt/dotnet/
	sudo ln -s /opt/dotnet/dotnet /usr/local/bin
	dotnet --info

	#Install Nginx & Certbot
	sudo apt-get install nginx-full certbot -y

	#Install NBXplorer
	cd /home/admin
	git clone https://github.com/dgarage/NBXplorer.git
	cd NBXplorer
	./build.sh

	#Create the NBXplorer system unit file
	sudo nano /etc/systemd/system/nbxplorer.service

	#copy and past the following code
	## Start of nbxplorer service file ##
	[Unit]
	Description=NBXplorer daemon
	Requires=bitcoind.service
	After=bitcoind.service

	[Service]
	ExecStart=/usr/local/bin/dotnet "/home/admin/NBXplorer/NBXplorer/bin/Release/netcoreapp2.1/NBXplorer.dll" -c /home/admin/.nbxplorer/Main/settings.config
	User=admin
	Group=admin
	Type=simple
	PIDFile=/run/nbxplorer/nbxplorer.pid
	Restart=on-failure

	PrivateTmp=true
	ProtectSystem=full
	NoNewPrivileges=true
	PrivateDevices=true

	[Install]
	WantedBy=multi-user.target
	## end of nbxplorer service file ##

	#reload the systemd daemon
	sudo systemctl daemon-reload

	#enable nbxplorer service
	sudo systemctl enable nbxplorer

	#start nbxplorer service
	sudo systemctl start nbxplorer

	#check to see if nbxplorer is running
	sudo systemctl status nbxplorer

	#add your Raspiblitz RPC credentials to the nbxplorer configuration settings
	nano /home/admin/.nbxplorer/Main/settings.config

	#Locate the "#By user name and password" section and uncomment these two lines and change the username and password.
	#the username is raspibolt and the password is what you set while installing raspiblitz
	btc.rpc.user=raspibolt
	btc.rpc.password=yourVerySecretPassword

	#restart nbxplorer
	sudo systemctl restart nbxplorer

	#Install BTCPayServer
	cd /home/admin
	git clone https://github.com/btcpayserver/btcpayserver.git
	cd btcpayserver
	./build.sh

	#create the BTCPayServer system unit fil
	sudo nano /etc/systemd/system/btcpayserver.service

	#copy and past the following code
	## Start of btcpayserver service file ##
	[Unit]
	Description=BtcPayServer daemon
	Requires=btcpayserver.service
	After=nbxplorer.service

	[Service]
	ExecStart=/usr/local/bin/dotnet run --no-launch-profile --no-build -c Release -p "/home/admin/btcpayserver/BTCPayServer/BTCPayServer.csproj" -- $@
	User=admin
	Group=admin
	Type=simple
	PIDFile=/run/btcpayserver/btcpayserver.pid
	Restart=on-failure

	[Install]
	WantedBy=multi-user.target
	## End of BTCPayServer service file ##

	#reload the systemd daemon
	sudo systemctl daemon-reload

	#enable btcpayserver service
	sudo systemctl enable btcpayserver

	#start btcpayserver
	sudo systemctl start btcpayserver

	#check to see if btcpayserver is running
	sudo systemctl status btcpayserver

	#enable the LND rest interface on port 8080
	cd /home/bitcoin/.lnd
	sudo nano lnd.conf

	#add the following line to the [Application Options] section
	restlisten=127.0.0.1:8080
	tlsextraip=0.0.0.0

	#backup existing TLS cert and key files
	sudo mv tls.cert tls.cert.backup
	sudo mv tls.key tls.key.backup

	#restarting lnd will generate new tls files
	sudo systemctl restart lnd

	#copy new tls.cert file to admin folder
	sudo cp tls.cert /home/admin/.lnd


	#update your btcpayserver settings
	nano /home/admin/.btcpayserver/Main/settings.config

	#make sure the following items are uncommented and correct. Replace example.com with your domain name
	### Global settings ###
	network=mainnet

	### Server settings ###
	port=23000
	bind=127.0.0.1
	externalurl=https://btcpay.example.com

	### NBXplorer settings ###
	BTC.explorer.url=http://127.0.0.1:24444/
	BTC.lightning=type=lnd-rest;server=https://127.0.0.1:8080/;macaroonfilepath=/home/admin/.lnd/data/chain/bitcoin/mainnet/admin.macaroon;certthumbprint=<paste your thumbprint here>

	#save file we will get the cert thumbprint next
	#get your cert thumbprint for BTCPayServer Lightning configuration
	cd /home/admin
	openssl x509 -noout -fingerprint -sha256 -inform pem -in ~/.lnd/tls.cert

	#copy thumbprint output to clipboard
	#replace thumbprint for lightning configuration
	sudo nano /home/admin/.btcpayserver/Main/settings.config

	#paste thumbprint at the end of this line
	BTC.lightning=type=lnd-rest;server=https://127.0.0.1:8080/;macaroonfilepath=/home/admin/.lnd/data/chain/bitcoin/mainnet/admin.macaroon;certthumbprint=<paste your thumbprint here>

	#restart btcpayserver
	sudo systemctl restart btcpayserver

	#Get your SSL certification using certbot
	sudo certbot certonly --authenticator standalone -d btcpay.example.com --pre-hook "service nginx stop" --post-hook "service nginx start"


	#Open Port 80
	sudo ufw allow 80, 443

	#add reverse proxy for btcpayserver

	#remove default nginx configuration
	sudo rm /etc/nginx/sites-enabled/default

	#create the btcpayserver configuration
	sudo nano /etc/nginx/sites-available/btcpayserver

	#Paste the following, make sure you change the domain name to yours

	server {
	listen 80 default_server;
	server_name _;
	return 301 https://$host$request_uri;
	}

	server {
	listen 443 ssl;
	server_name btcpay.example.com;
	ssl on;

	ssl_certificate /etc/letsencrypt/live/btcpay.example.com/fullchain.pem;
	ssl_certificate_key /etc/letsencrypt/live/btcpay.example.com/privkey.pem;
	ssl_session_timeout 1d;
	ssl_session_cache shared:SSL:50m;
	ssl_session_tickets off;
	ssl_protocols TLSv1.1 TLSv1.2;
	ssl_ciphers 'ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!3DES:!MD5:!PSK';
	ssl_prefer_server_ciphers on;
	ssl_stapling on;
	ssl_stapling_verify on;
	ssl_trusted_certificate /etc/letsencrypt/live/btcpay.example.com/chain.pem;

	location / {
	proxy_set_header Host $host;
	proxy_set_header X-Real-IP $remote_addr;
	proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
	proxy_set_header X-Forwarded-Proto $scheme;
	proxy_pass http://localhost:23000;
	}
	}

	#remove default nginx configuration
	sudo rm /etc/nginx/sites-enabled/default

	#add symlink for btcpayserver site
	sudo ln -s /etc/nginx/sites-available/btcpayserver /etc/nginx/sites-enabled/

	#restart nginx
	sudo systemctl restart nginx