Created
February 14, 2014 08:45
-
-
Save nprussell/8997770 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| D/use-Rlog/RLOG-RIL_ATD( 272): gUartPath = dev/ttyHSL0 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): UART ttyHSL0 is not used by console | |
| D/use-Rlog/RLOG-RIL_ATD( 272): read(//efs/FactoryApp/hist_nv) : | |
| E/RIL-QMI ( 275): qmi_client [275]: unable to connect to server, errno=[2:No such file or directory], attempt=1 | |
| D/RIL-QMI ( 268): switch user for CTS | |
| E/RIL-QMI ( 268): qmuxd: linux_qmi_read_sysfs_config: couldn't open file /sys/module/f_rmnet/parameters/rmnet_ctl_ch | |
| E/RIL-QMI ( 268): qmuxd: linux_qmi_read_sysfs_config: couldn't open /sys/module/rmnet/parameters/rmnet_ctl_ch | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=0, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=1, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=2, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=3, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=4, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=5, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=6, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=7, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=8, enabled=0, open_at_powerup=0 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=9, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=10, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=11, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=12, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=13, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=14, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=15, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=16, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=17, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): linux_qmi_qmux_if_configure_port_timeout: mode=0, smd_timeout=20, hsic_timeout=60 | |
| E/RIL-QMI ( 268): linux_qmi_qmux_if_configure_port_timeout: failed to open SMD timeout config=/sys/devices/virtual/smdpkt/smdcntl0/open_timeout errno [2:No such file or directory] | |
| E/RIL-QMI ( 288): qmi_client [288]: unable to connect to server, errno=[2:No such file or directory], attempt=1 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): read(//efs/FactoryApp/fdata) : N0NN | |
| D/use-Rlog/RLOG-RIL_ATD( 272): read(//efs/FactoryApp/test_nv) : 01P02N03N04N05N06N07P08N09N10N11P12P13N14P15P16P17P18N19N20N21P22P23P24P25P26N27P28N29N30P31P32P33P34P35N36N37P38P39P40P41P42N43P44P45N46P47N48P49P50P51N52N53N54N55N56P57N58N59N60N61N62P63N64N65N66N67N68N69N70P71P72P73N74N75N76N77N78N79N80N81N82N83N84N85N86N87N88N89N90N | |
| D/use-Rlog/RLOG-RIL_ATD( 272): MakeLocalServer(): FactoryClientRecv Communication: Server_socket 7 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): InitSocketAcceptHandler(): FactoryClientRecv, id(0), fd(7) | |
| D/use-Rlog/RLOG-RIL_ATD( 272): MakeLocalServer(): FactoryClientSend Communication: Server_socket 9 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): InitSocketAcceptHandler(): FactoryClientSend, id(1), fd(9) | |
| D/use-Rlog/RLOG-RIL_ATD( 272): MakeLocalServer(): ATDMultiClient Communication: Server_socket 10 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): InitSocketAcceptHandler(): ATDMultiClient, id(5), fd(10) | |
| D/use-Rlog/RLOG-RIL_ATD( 272): MakeLocalServer(): DiagApp Communication: Server_socket 11 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): InitSocketAcceptHandler(): DiagApp, id(2), fd(11) | |
| D/use-Rlog/RLOG-RIL_ATD( 272): first start | |
| E/RIL-QMI ( 273): qmi_client [273]: unable to connect to server, errno=[2:No such file or directory], attempt=1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RILD ( 196): First Ril | |
| E/RILC ( 196): RIL_register: RIL version 7 | |
| E/RILD ( 196): Debug channel is not opened for ship build. | |
| E/RILD ( 196): Trying qmi_init(): retryCount(0) | |
| E/RIL-QMI ( 196): qmi_client [196]: unable to connect to server, errno=[2:No such file or directory], attempt=1 | |
| E/RIL-QMI ( 275): qmi_client [275]: unable to connect to server, errno=[2:No such file or directory], attempt=2 | |
| E/RIL-QMI ( 288): qmi_client [288]: unable to connect to server, errno=[2:No such file or directory], attempt=2 | |
| E/RIL-QMI ( 273): qmi_client [273]: unable to connect to server, errno=[2:No such file or directory], attempt=2 | |
| E/RIL-QMI ( 196): qmi_client [196]: unable to connect to server, errno=[2:No such file or directory], attempt=2 | |
| E/RIL-QMI ( 209): qmi_client [209]: unable to connect to server, errno=[2:No such file or directory], attempt=1 | |
| D/TelephonyManager( 207): No /proc/cmdline exception=java.io.FileNotFoundException: /proc/cmdline: open failed: EACCES (Permission denied) | |
| D/TelephonyManager( 207): /proc/cmdline= | |
| E/RIL-QMI ( 275): qmi_client [275]: unable to connect to server, errno=[2:No such file or directory], attempt=3 | |
| E/RIL-QMI ( 288): qmi_client [288]: unable to connect to server, errno=[2:No such file or directory], attempt=3 | |
| E/RIL-QMI ( 273): qmi_client [273]: unable to connect to server, errno=[2:No such file or directory], attempt=3 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 196): qmi_client [196]: unable to connect to server, errno=[2:No such file or directory], attempt=3 | |
| E/RIL-QMI ( 209): qmi_client [209]: unable to connect to server, errno=[2:No such file or directory], attempt=2 | |
| E/RIL-QMI ( 275): qmi_client [275]: unable to connect to server, errno=[2:No such file or directory], attempt=4 | |
| E/RIL-QMI ( 288): qmi_client [288]: unable to connect to server, errno=[2:No such file or directory], attempt=4 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): IsUartUsingAP is AP | |
| D/use-Rlog/RLOG-RIL_ATD( 272): ConnectToUart() | |
| D/use-Rlog/RLOG-RIL_ATD( 272): Transport file name: dev/ttyHSL0 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): connect to local socket fd : 12 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): InitSocketMessageHandler(): UART, id(3), fd(12) | |
| D/use-Rlog/RLOG-RIL_ATD( 272): ConnectToRil() | |
| D/use-Rlog/RLOG-RIL_ATD( 272): try to connect RIL | |
| E/RILClient( 272): Connect_RILD: Connecting failed. Connection refused(111) | |
| E/use-Rlog/RLOG-RIL_ATD( 272): connection fail & retry connect(0) | |
| E/RIL-QMI ( 273): qmi_client [273]: unable to connect to server, errno=[2:No such file or directory], attempt=4 | |
| E/RIL-QMI ( 196): qmi_client [196]: unable to connect to server, errno=[2:No such file or directory], attempt=4 | |
| E/RIL-QMI ( 209): qmi_client [209]: unable to connect to server, errno=[2:No such file or directory], attempt=3 | |
| E/RIL-QMI ( 275): qmi_client [275]: unable to connect to server, errno=[2:No such file or directory], attempt=5 | |
| E/RIL-QMI ( 288): qmi_client [288]: unable to connect to server, errno=[2:No such file or directory], attempt=5 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): try to connect RIL | |
| E/RILClient( 272): Connect_RILD: Connecting failed. Connection refused(111) | |
| E/use-Rlog/RLOG-RIL_ATD( 272): connection fail & retry connect(1) | |
| E/RIL-QMI ( 273): qmi_client [273]: unable to connect to server, errno=[2:No such file or directory], attempt=5 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 196): qmi_client [196]: unable to connect to server, errno=[2:No such file or directory], attempt=5 | |
| E/RIL-QMI ( 209): qmi_client [209]: unable to connect to server, errno=[2:No such file or directory], attempt=4 | |
| E/RIL-QMI ( 275): qmi_client [275]: unable to connect to server, errno=[2:No such file or directory], attempt=6 | |
| E/RIL-QMI ( 288): qmi_client [288]: unable to connect to server, errno=[2:No such file or directory], attempt=6 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): try to connect RIL | |
| E/RILClient( 272): Connect_RILD: Connecting failed. Connection refused(111) | |
| E/use-Rlog/RLOG-RIL_ATD( 272): connection fail & retry connect(2) | |
| E/RIL-QMI ( 273): qmi_client [273]: unable to connect to server, errno=[2:No such file or directory], attempt=6 | |
| E/RIL-QMI ( 196): qmi_client [196]: unable to connect to server, errno=[2:No such file or directory], attempt=6 | |
| E/RIL-QMI ( 209): qmi_client [209]: unable to connect to server, errno=[2:No such file or directory], attempt=5 | |
| E/RIL-QMI ( 275): qmi_client [275]: unable to connect to server, errno=[2:No such file or directory], attempt=7 | |
| E/RIL-QMI ( 288): qmi_client [288]: unable to connect to server, errno=[2:No such file or directory], attempt=7 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): try to connect RIL | |
| E/RILClient( 272): Connect_RILD: Connecting failed. Connection refused(111) | |
| E/use-Rlog/RLOG-RIL_ATD( 272): connection fail & retry connect(3) | |
| E/RIL-QMI ( 273): qmi_client [273]: unable to connect to server, errno=[2:No such file or directory], attempt=7 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 196): qmi_client [196]: unable to connect to server, errno=[2:No such file or directory], attempt=7 | |
| E/RIL-QMI ( 209): qmi_client [209]: unable to connect to server, errno=[2:No such file or directory], attempt=6 | |
| E/RIL-QMI ( 275): qmi_client [275]: unable to connect to server, errno=[2:No such file or directory], attempt=8 | |
| E/RIL-QMI ( 288): qmi_client [288]: unable to connect to server, errno=[2:No such file or directory], attempt=8 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): try to connect RIL | |
| E/RILClient( 272): Connect_RILD: Connecting failed. Connection refused(111) | |
| E/use-Rlog/RLOG-RIL_ATD( 272): connection fail & retry connect(4) | |
| E/RIL-QMI ( 273): qmi_client [273]: unable to connect to server, errno=[2:No such file or directory], attempt=8 | |
| E/RIL-QMI ( 196): qmi_client [196]: unable to connect to server, errno=[2:No such file or directory], attempt=8 | |
| E/RIL-QMI ( 209): qmi_client [209]: unable to connect to server, errno=[2:No such file or directory], attempt=7 | |
| E/RIL-QMI ( 275): qmi_client [275]: unable to connect to server, errno=[2:No such file or directory], attempt=9 | |
| E/RIL-QMI ( 288): qmi_client [288]: unable to connect to server, errno=[2:No such file or directory], attempt=9 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): try to connect RIL | |
| E/RILClient( 272): Connect_RILD: Connecting failed. Connection refused(111) | |
| E/use-Rlog/RLOG-RIL_ATD( 272): connection fail & retry connect(5) | |
| E/RIL-QMI ( 273): qmi_client [273]: unable to connect to server, errno=[2:No such file or directory], attempt=9 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 196): qmi_client [196]: unable to connect to server, errno=[2:No such file or directory], attempt=9 | |
| E/RIL-QMI ( 209): qmi_client [209]: unable to connect to server, errno=[2:No such file or directory], attempt=8 | |
| E/RIL-QMI ( 275): qmi_client [275]: unable to connect to server, errno=[2:No such file or directory], attempt=10 | |
| E/RIL-QMI ( 288): qmi_client [288]: unable to connect to server, errno=[2:No such file or directory], attempt=10 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): try to connect RIL | |
| E/RILClient( 272): Connect_RILD: Connecting failed. Connection refused(111) | |
| E/use-Rlog/RLOG-RIL_ATD( 272): connection fail & retry connect(6) | |
| E/RIL-QMI ( 273): qmi_client [273]: unable to connect to server, errno=[2:No such file or directory], attempt=10 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| E/RIL-RAWDATA( 268): qmi_ctl_rx_msg.c Can't find txn info for txn_id = 1 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| E/RIL-QMI ( 196): qmi_client [196]: unable to connect to server, errno=[2:No such file or directory], attempt=10 | |
| E/RIL-QMI ( 209): qmi_client [209]: unable to connect to server, errno=[2:No such file or directory], attempt=9 | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 11] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 12] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl3, error [110:Connection timed out] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET21 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl4, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET22 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl5, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET23 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl6, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET24 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl7, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET25 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl8, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET26 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl9, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET27 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl10, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET28 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl11, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET29 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl12, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET30 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl13, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET31 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl14, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET32 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl15, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET33 failed | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl16, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-QMI ( 268): qmuxd: Opening connection for RMNET34 failed | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=35, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=36, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=37, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=38, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=39, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=40, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=41, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=42, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=43, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=44, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): qmuxd: skipping opening conn_id=45, enabled=0, open_at_powerup=1 | |
| D/RIL-QMI ( 268): linux_qmi_qmux_if_configure_port_timeout: mode=1, smd_timeout=0, hsic_timeout=0 | |
| E/RIL-QMI ( 268): linux_qmi_qmux_if_configure_port_timeout: failed to open SMD timeout config=/sys/devices/virtual/smdpkt/smdcntl0/open_timeout errno [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_ctl_rx_msg.c Can't find txn info for txn_id = 1 | |
| E/RIL-RAWDATA( 268): qmi_ctl_rx_msg.c Can't find txn info for txn_id = 1 | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| I/PhoneFactory( 1079): Network Mode set to 0 | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| I/PhoneFactory( 1079): lteOnCdma is 0 use SUBSCRIPTION_FROM_NV | |
| I/PhoneFactory( 1079): Cdma Subscription set to 1 | |
| D/RILJ ( 1079): [null] RIL(context, preferredNetworkType=0 cdmaSubscription=1) | |
| D/RILJ ( 1079): [rild] RIL Socket Name:rild | |
| D/RILJ ( 1079): [rild] Starting RILReceiver | |
| I/RILJ ( 1079): Connected to 'rild' socket | |
| D/RIL_UiccController( 1079): Creating UiccController | |
| I/PhoneFactory( 1079): Creating GSMPhone | |
| D/TelephonyTester( 1079): register for intent action=com.android.internal.telephony.gsm.action_detached | |
| D/TelephonyTester( 1079): register for intent action=com.android.internal.telephony.gsm.action_attached | |
| D/PhoneBase( 1079): mDoesRilSendMultipleCallRing=false | |
| D/PhoneBase( 1079): mCallRingDelay=3000 | |
| D/PhoneBase( 1079): PhoneBase Chameleon feature: false | |
| I/GSMPhone( 1079): Creating GSMPhone slot 0 | |
| D/use-Rlog/RLOG-RIL_PhoneInfoShar( 1079): Creating PhoneInfoShareManager | |
| D/RILJ ( 1079): [rild] setPhoneType=1 old value=0 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 58 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 24] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=18 from qmux_client_id=1 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=18, to clientID = 1, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=18 from qmux_client_id=1 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=18, to clientID = 1, len=904 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 60 bytes on fd=18 from qmux_client_id=1 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 26] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/use-Rlog/RLOG-RIL_ATD( 272): try to connect RIL | |
| E/RILClient( 272): Connect_RILD: Connecting failed. Connection refused(111) | |
| E/use-Rlog/RLOG-RIL_ATD( 272): connection fail & retry connect(7) | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=18, to clientID = 1, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 60 bytes on fd=18 from qmux_client_id=1 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 26] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=20 from qmux_client_id=3 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=20, to clientID = 3, len=904 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| E/RIL-QMI ( 280): qmi_client [280]: unable to bind to client socket, rc = -1 errno[13:Permission denied] | |
| E/RIL-QMI ( 280): qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=18, to clientID = 1, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 60 bytes on fd=18 from qmux_client_id=1 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 26] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| E/GsmSST ( 1079): ruimUiccApplication is null | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/SMSDispatcher( 1079): SMSDispatcher: ctor mSmsCapable=true format=3gpp mSmsReceiveDisabled=false mSmsSendDisabled=false | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): DCT.constructor | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/Dcc ( 1079): E ctor | |
| D/Dcc ( 1079): X ctor | |
| D/DcTesterFailBrinupAll( 1079): register for intent action=com.android.internal.telephony.dataconnection.action_fail_bringup | |
| D/DcTesterFailBrinupAll( 1079): register for intent action=com.android.internal.telephony.gsm.action_detached | |
| D/DcTesterFailBrinupAll( 1079): register for intent action=com.android.internal.telephony.gsm.action_attached | |
| D/DCT ( 1079): GsmDCT.constructor | |
| E/PhoneBase( 1079): Error! registerForSubscriptionInfoReady() in PhoneBase should not be called, CDMAPhone inactive. | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=18, to clientID = 1, len=54 | |
| D/DcTesterDeacativeAll( 1079): register for intent action=com.android.internal.telephony.dataconnection.action_deactivate_all | |
| D/RIL-QMI ( 268): qmuxd: RX 60 bytes on fd=18 from qmux_client_id=1 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 26] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DcTesterDeacativeAll( 1079): register for intent action=com.android.internal.telephony.gsm.action_detached | |
| D/DCT ( 1079): applyNewState(default, true(true), true(false)) | |
| D/DCT ( 1079): trySetupData for type:default due to dependencyMet apnContext={mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=dependencyMet mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): trySetupData with mIsPsRestricted=false | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): notifyOffApnsOfAvailability skipped apn due to isReady==true: {mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=dependencyMet mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): trySetupData: X apnContext not 'ready' retValue=false | |
| D/DCT ( 1079): applyNewState(mms, false(false), true(false)) | |
| D/DCT ( 1079): applyNewState(supl, false(false), true(false)) | |
| D/DCT ( 1079): applyNewState(dun, false(false), true(false)) | |
| D/DCT ( 1079): applyNewState(hipri, false(false), true(false)) | |
| D/DCT ( 1079): applyNewState(fota, false(false), true(false)) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/DCT ( 1079): applyNewState(ims, false(false), true(false)) | |
| D/DCT ( 1079): applyNewState(cbs, false(false), true(false)) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=18, to clientID = 1, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 60 bytes on fd=18 from qmux_client_id=1 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 26] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| I/GSMPhone( 1079): Successfully created GSMPhone slot 0 | |
| D/RIL_IccCardProxy_0( 1079): Creating | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL_IccCardProxy_0( 1079): Broadcasting intent ACTION_SIM_STATE_CHANGED NOT_READY reason null SIM SLOT 0 | |
| D/RIL_IccCardProxy_0( 1079): Setting radio tech UMTS:3 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/CallManager( 1079): registerPhone(GSM Handler (com.android.internal.telephony.PhoneProxy) {42f63728}) | |
| D/PhoneBase( 1079): registerForSrvccHandOver | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=18, to clientID = 1, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 60 bytes on fd=18 from qmux_client_id=1 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 26] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 77 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 43] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=19 from qmux_client_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=18, to clientID = 1, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 59 bytes on fd=18 from qmux_client_id=1 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 25] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=69 | |
| D/RIL-QMI ( 268): qmuxd: RX 57 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 23] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=69 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet0) | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet1) | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet2) | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet3) | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet4) | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet5) | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet6) | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=18, to clientID = 1, len=54 | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet7) | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet_usb3) | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet_usb4) | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet_usb5) | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet_usb6) | |
| E/RILD ( 196): Failed to get LLP mode of interface(rmnet_usb7) | |
| E/RILD ( 196): Failed to open port(rmnet0): err(19, No such device) | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 59 bytes on fd=19 from qmux_client_id=2 | |
| E/RILD ( 196): Failed to open port(rmnet1): err(19, No such device) | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 25] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| E/RILD ( 196): Failed to open port(rmnet2): err(19, No such device) | |
| E/RILD ( 196): Failed to open port(rmnet3): err(19, No such device) | |
| E/RILD ( 196): Failed to open port(rmnet4): err(19, No such device) | |
| E/RILD ( 196): Failed to open port(rmnet5): err(19, No such device) | |
| E/RILD ( 196): Failed to open port(rmnet6): err(19, No such device) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=67 | |
| E/RILD ( 196): Failed to open port(rmnet7): err(19, No such device) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=51 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 57 bytes on fd=19 from qmux_client_id=2 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 23] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=69 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 54 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 20] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=19, to clientID = 2, len=67 | |
| D/RILJ ( 1079): [rild] [0000]> SET_SUPP_SVC_NOTIFICATION | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0001]> GET_CURRENT_CALLS | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| E/GsmSST ( 1079): ruimUiccApplication is null | |
| D/RIL-QMI ( 268): qmuxd: RX 54 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 20] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 679): getTdScdmaLevel = 0 | |
| W/SignalStrength( 679): getLevel=0 (SignalStrength: 99 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 2147483647 2147483647 gsm|lte 0x0) | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-RAWDATA( 268): Adding client 2, service 16, conn_id=18... | |
| D/RIL-RAWDATA( 268): .... for qmux_client_id = 0, in slot 1, for clnt_srv_info=b72deb90 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GsmSST ( 1079): [GsmSST_0] Poll ServiceState done: oldSS=[1 1 home null null null Unknown:0 Unknown:0 CSS not supported 0 0 RoamInd=0 DefRoamInd=0 EmergOnly=false] mNewSS=[1 1 home null null null Unknown:0 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] oldMaxDataCalls=1 mNewMaxDataCalls=1 oldReasonDataDenied=-1 mNewReasonDataDenied=-1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| V/GsmSST ( 1079): hasChanged : true, NetworkStateChangedByRescanDialog : false, isFirstRescanDialogCheckAfterBoot : false | |
| I/GsmSST ( 1079): SelectionMode : null, isBootCompleted : false | |
| I/GsmSST ( 1079): Network State Changed, NO SIM or EONS not loaded: So update Service state display | |
| D/GsmSST ( 1079): [GsmSST_0] updateSpnDisplay: radio is on but out of service, set plmn='No service' | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/GsmSST ( 1079): [GsmSST_0] updateSpnDisplay: SIM records are not loaded - plmn='No service' | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=51 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/GsmSST ( 1079): [GsmSST_0] operatorNumeric is null | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=17 from qmux_client_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 58 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 24] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GsmSST ( 1079): [GsmSST_0] SystemProperties.get(TelephonyProperties.PROPERTY_OPERATOR_ISROAMING) truess.getRoaming() true, simslot = 0 | |
| D/DCT ( 1079): handleMessage msg={ what=270369 when=-345ms obj=android.os.AsyncResult@42f85370 } | |
| D/DCT ( 1079): handleMessage msg={ what=270342 when=-337ms obj=android.os.AsyncResult@42f8a070 } | |
| D/DCT ( 1079): onRadioOffOrNotAvailable: is off and clean up all connections | |
| D/DCT ( 1079): cleanUpAllConnections: tearDown=false reason=radioTurnedOff | |
| D/DCT ( 1079): cleanUpConnection: E tearDown=false reason=radioTurnedOff apnContext={mApnType=fota mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=51 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(fota): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:fota | |
| D/DCT ( 1079): [ApnContext:fota] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): cleanUpConnection: X tearDown=false reason=radioTurnedOff apnContext={mApnType=fota mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} dcac=null | |
| D/DCT ( 1079): cleanUpConnection: E tearDown=false reason=radioTurnedOff apnContext={mApnType=dun mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(dun): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:dun | |
| D/DCT ( 1079): [ApnContext:dun] getApnSetting: apnSetting=null | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=22 from qmux_client_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=37 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=37, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): cleanUpConnection: X tearDown=false reason=radioTurnedOff apnContext={mApnType=dun mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} dcac=null | |
| D/DCT ( 1079): cleanUpConnection: E tearDown=false reason=radioTurnedOff apnContext={mApnType=supl mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(supl): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/DCT ( 1079): get active apn string for type:supl | |
| D/DCT ( 1079): [ApnContext:supl] getApnSetting: apnSetting=null | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=51 | |
| D/DCT ( 1079): cleanUpConnection: X tearDown=false reason=radioTurnedOff apnContext={mApnType=supl mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} dcac=null | |
| D/DCT ( 1079): cleanUpConnection: E tearDown=false reason=radioTurnedOff apnContext={mApnType=hipri mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(hipri): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:hipri | |
| D/DCT ( 1079): [ApnContext:hipri] getApnSetting: apnSetting=null | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=61 | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): cleanUpConnection: X tearDown=false reason=radioTurnedOff apnContext={mApnType=hipri mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} dcac=null | |
| D/DCT ( 1079): cleanUpConnection: E tearDown=false reason=radioTurnedOff apnContext={mApnType=ims mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(ims): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:ims | |
| D/DCT ( 1079): [ApnContext:ims] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): cleanUpConnection: X tearDown=false reason=radioTurnedOff apnContext={mApnType=ims mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} dcac=null | |
| D/DCT ( 1079): cleanUpConnection: E tearDown=false reason=radioTurnedOff apnContext={mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(default): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=true apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:default | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): cleanUpConnection: X tearDown=false reason=radioTurnedOff apnContext={mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=true mDependencyMet=true} dcac=null | |
| D/DCT ( 1079): cleanUpConnection: E tearDown=false reason=radioTurnedOff apnContext={mApnType=mms mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=61 | |
| D/RIL-QMI ( 268): qmuxd: RX 78 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 44] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(mms): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:mms | |
| D/DCT ( 1079): [ApnContext:mms] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): cleanUpConnection: X tearDown=false reason=radioTurnedOff apnContext={mApnType=mms mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} dcac=null | |
| D/DCT ( 1079): cleanUpConnection: E tearDown=false reason=radioTurnedOff apnContext={mApnType=cbs mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(cbs): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:cbs | |
| D/DCT ( 1079): [ApnContext:cbs] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): cleanUpConnection: X tearDown=false reason=radioTurnedOff apnContext={mApnType=cbs mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} dcac=null | |
| D/DCT ( 1079): stopNetStatPoll | |
| D/DCT ( 1079): stopDataStallAlarm: current tag=15595 mDataStallAlarmIntent=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:fota | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(fota): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:fota | |
| D/DCT ( 1079): [ApnContext:fota] getApnSetting: apnSetting=null | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=61 | |
| D/RIL-QMI ( 268): qmuxd: RX 70 bytes on fd=22 from qmux_client_id=5 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 36] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:dun | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=22, to clientID = 5, len=61 | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(dun): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:dun | |
| D/DCT ( 1079): [ApnContext:dun] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:supl | |
| D/RIL-QMI ( 268): qmuxd: RX 54 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 20] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(supl): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:supl | |
| D/DCT ( 1079): [ApnContext:supl] getApnSetting: apnSetting=null | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:hipri | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(hipri): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:hipri | |
| D/DCT ( 1079): [ApnContext:hipri] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:ims | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(ims): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:ims | |
| D/DCT ( 1079): [ApnContext:ims] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnsOfAvailability skipped apn due to isReady==true: {mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:mms | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(mms): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:mms | |
| D/DCT ( 1079): [ApnContext:mms] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:cbs | |
| D/RIL-QMI ( 268): qmuxd: RX 54 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 20] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(cbs): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:cbs | |
| D/DCT ( 1079): [ApnContext:cbs] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): handleMessage msg={ what=270345 when=-484ms obj=android.os.AsyncResult@42f8a300 } | |
| D/DCT ( 1079): onDataConnectionDetached: stop polling and notify detached | |
| D/DCT ( 1079): stopNetStatPoll | |
| D/DCT ( 1079): stopDataStallAlarm: current tag=15596 mDataStallAlarmIntent=null | |
| D/DCT ( 1079): notifyDataConnection: reason=dataDetached | |
| D/DCT ( 1079): notifyDataConnection: type:default | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(default): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=true apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:default | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:fota | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(fota): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:fota | |
| D/DCT ( 1079): [ApnContext:fota] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:dun | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(dun): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:dun | |
| D/DCT ( 1079): [ApnContext:dun] getApnSetting: apnSetting=null | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:supl | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(supl): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:supl | |
| D/DCT ( 1079): [ApnContext:supl] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:hipri | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(hipri): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:hipri | |
| D/DCT ( 1079): [ApnContext:hipri] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:ims | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(ims): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:ims | |
| D/DCT ( 1079): [ApnContext:ims] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnsOfAvailability skipped apn due to isReady==true: {mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:mms | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(mms): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:mms | |
| D/DCT ( 1079): [ApnContext:mms] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:cbs | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(cbs): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:cbs | |
| D/DCT ( 1079): [ApnContext:cbs] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): handleMessage msg={ what=270348 when=-523ms obj=android.os.AsyncResult@42f8a458 } | |
| D/DCT ( 1079): onRoamingOff | |
| D/DCT ( 1079): notifyDataConnection: reason=roamingOff | |
| D/DCT ( 1079): notifyDataConnection: type:default | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(default): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=true apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:default | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:fota | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(fota): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:fota | |
| D/DCT ( 1079): [ApnContext:fota] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:dun | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(dun): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:dun | |
| D/DCT ( 1079): [ApnContext:dun] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:supl | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(supl): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:supl | |
| D/DCT ( 1079): [ApnContext:supl] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:hipri | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(hipri): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:hipri | |
| D/DCT ( 1079): [ApnContext:hipri] getApnSetting: apnSetting=null | |
| D/RIL-QMI ( 268): qmuxd: RX 54 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 20] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:ims | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(ims): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:ims | |
| D/DCT ( 1079): [ApnContext:ims] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnsOfAvailability skipped apn due to isReady==true: {mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:mms | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(mms): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:mms | |
| D/DCT ( 1079): [ApnContext:mms] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:cbs | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(cbs): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:cbs | |
| D/DCT ( 1079): [ApnContext:cbs] getApnSetting: apnSetting=null | |
| D/RIL_IccCardProxy_0( 1079): IccCardProxy handleMessage : 3 | |
| D/RIL_IccCardProxy_0( 1079): No card available | |
| D/RIL_IccCardProxy_0( 1079): IccCardProxy handleMessage : 1 | |
| D/RILJ ( 1079): [rild] [0002]> SMS_ACKNOWLEDGE true 0 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/DebugService( 1079): DebugService DebugService: | |
| D/SipService( 1079): SipService: started! | |
| D/SipService( 1079): start: | |
| D/RIL-QMI ( 268): qmuxd: RX 89 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 55] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/GSMPhone( 1079): Service state changed | |
| D/GSMPhone( 1079): setEmergencyNumbers: simstateProperty=NOT_READY | |
| D/DCT ( 1079): handleMessage msg={ what=270347 when=-277ms obj=android.os.AsyncResult@42fe7030 } | |
| D/DCT ( 1079): onRoamingOn | |
| D/DCT ( 1079): onRoamingOn: setup data on roaming | |
| D/DCT ( 1079): setupDataOnConnectableApns: isConnectable() call trySetupData | |
| D/DCT ( 1079): trySetupData for type:default due to roamingOn apnContext={mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=roamingOn mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): trySetupData with mIsPsRestricted=false | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:fota | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(fota): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:fota | |
| D/DCT ( 1079): [ApnContext:fota] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:dun | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(dun): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:dun | |
| D/DCT ( 1079): [ApnContext:dun] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:supl | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(supl): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:supl | |
| D/DCT ( 1079): [ApnContext:supl] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:hipri | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(hipri): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:hipri | |
| D/DCT ( 1079): [ApnContext:hipri] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:ims | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(ims): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:ims | |
| D/DCT ( 1079): [ApnContext:ims] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnsOfAvailability skipped apn due to isReady==true: {mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=roamingOn mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:mms | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(mms): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:mms | |
| D/DCT ( 1079): [ApnContext:mms] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:cbs | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(cbs): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:cbs | |
| D/DCT ( 1079): [ApnContext:cbs] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): trySetupData: X apnContext not 'ready' retValue=false | |
| D/DCT ( 1079): notifyDataConnection: reason=roamingOn | |
| D/DCT ( 1079): notifyDataConnection: type:default | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(default): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=true apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:default | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:fota | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(fota): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:fota | |
| D/DCT ( 1079): [ApnContext:fota] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:dun | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(dun): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:dun | |
| D/DCT ( 1079): [ApnContext:dun] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:supl | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(supl): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:supl | |
| D/DCT ( 1079): [ApnContext:supl] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:hipri | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(hipri): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:hipri | |
| D/DCT ( 1079): [ApnContext:hipri] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:ims | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(ims): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:ims | |
| D/DCT ( 1079): [ApnContext:ims] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnsOfAvailability skipped apn due to isReady==true: {mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=roamingOn mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:mms | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(mms): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:mms | |
| D/DCT ( 1079): [ApnContext:mms] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:cbs | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(cbs): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:cbs | |
| D/DCT ( 1079): [ApnContext:cbs] getApnSetting: apnSetting=null | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| W/SignalStrength( 924): getTdScdmaLevel = 0 | |
| W/SignalStrength( 924): getLevel=0 (SignalStrength: 99 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 2147483647 2147483647 gsm|lte 0x0) | |
| W/SignalStrength( 924): getTdScdmaLevel = 0 | |
| W/SignalStrength( 924): getLevel=0 (SignalStrength: 99 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 2147483647 2147483647 gsm|lte 0x0) | |
| D/use-Rlog/RLOG-RIL_ATD( 272): try to connect RIL | |
| E/RILClient( 272): Connect_RILD: Connecting failed. Connection refused(111) | |
| E/use-Rlog/RLOG-RIL_ATD( 272): connection fail & retry connect(8) | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X empty mCellLoc and CellInfo mCellLoc=[-1,-1,-1] | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X empty mCellLoc and CellInfo mCellLoc=[-1,-1,-1] | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X empty mCellLoc and CellInfo mCellLoc=[-1,-1,-1] | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X empty mCellLoc and CellInfo mCellLoc=[-1,-1,-1] | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X empty mCellLoc and CellInfo mCellLoc=[-1,-1,-1] | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X empty mCellLoc and CellInfo mCellLoc=[-1,-1,-1] | |
| E/RILD ( 196): Failed to open port(rmnet_usb3): err(19, No such device) | |
| E/RILD ( 196): Failed to open port(rmnet_usb4): err(19, No such device) | |
| E/RILD ( 196): Failed to open port(rmnet_usb5): err(19, No such device) | |
| E/RILD ( 196): Failed to open port(rmnet_usb6): err(19, No such device) | |
| E/RILD ( 196): Failed to open port(rmnet_usb7): err(19, No such device) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=0 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=0, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet0) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=1 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=1 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=1, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet1) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=2 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=2, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet2) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=3 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=3 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=3, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet3) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=4 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=4 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=4, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet4) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=5 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=5, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet5) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=6 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=6 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=6, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet6) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: connection is disabled for conn_id=7 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=7 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=7, status_flags=4 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet7) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-RAWDATA( 268): Adding client 2, service 1, conn_id=18... | |
| D/RIL-RAWDATA( 268): .... for qmux_client_id = 4, in slot 1, for clnt_srv_info=b72ded18 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 21] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_set_data_format_rsp, skipping unknown type = 18 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 11] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 11] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-RAWDATA( 268): Adding client 2, service 1, conn_id=19... | |
| D/RIL-RAWDATA( 268): .... for qmux_client_id = 4, in slot 1, for clnt_srv_info=b72ded38 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 11] [msg_len = 21] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_set_data_format_rsp, skipping unknown type = 18 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 12] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 12] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-RAWDATA( 268): Adding client 2, service 1, conn_id=20... | |
| D/RIL-RAWDATA( 268): .... for qmux_client_id = 4, in slot 1, for clnt_srv_info=b72ded58 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 12] [msg_len = 21] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_set_data_format_rsp, skipping unknown type = 18 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl3, error [110:Connection timed out] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=21 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=21, status_flags=0 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet_usb3) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl4, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=22 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=22, status_flags=0 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet_usb4) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl5, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=23 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=23, status_flags=0 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet_usb5) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl6, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=24 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=24, status_flags=0 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet_usb6) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| E/RIL-QMI ( 268): linux_qmi_qmux_io.c: Unable to open port id /dev/hsicctl7, error [2:No such file or directory] | |
| E/RIL-RAWDATA( 268): qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1 | |
| E/RIL-RAWDATA( 268): qmi_qmux_tx_msg: failed to open inactive connd_id=25 | |
| E/RIL-RAWDATA( 268): qmi_qmux: TX failed, connection inactive or in reset, conn_id=25, status_flags=0 | |
| E/RIL-RAWDATA( 268): qmi_ctl_tx_msg: qmi_qmux_tx_msg failed | |
| E/RIL-RAWDATA( 268): qmi_ctl_handle_request: qmi_ctl_tx_msg call failed | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Failed to initialize WDS client for IPv4(rmnet_usb7) | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-RAWDATA( 268): Adding client 3, service 1, conn_id=18... | |
| D/RIL-RAWDATA( 268): .... for qmux_client_id = 4, in slot 2, for clnt_srv_info=b72ded18 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/use-Rlog/RLOG-RIL_ATD( 272): try to connect RIL | |
| E/RILClient( 272): Connect_RILD: Connecting failed. Connection refused(111) | |
| E/use-Rlog/RLOG-RIL_ATD( 272): connection fail & retry connect(9) | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-RAWDATA( 268): Adding client 2, service 9, conn_id=18... | |
| D/RIL-RAWDATA( 268): .... for qmux_client_id = 4, in slot 1, for clnt_srv_info=b72debd0 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| E/RILD ( 196): Debug channel is not opened for ship build. | |
| E/RILD ( 196): fail to remove MSISDN_FILE_PATH | |
| E/RILD ( 196): fail to remove IMSI_FILE_PATH | |
| E/RILD ( 196): fail to remove ICCID_FILE | |
| E/RILD ( 196): fail to remove IMSIM_FILE | |
| E/RILD ( 196): fail to remove IMSIG_FILE | |
| E/RILD ( 196): fail to remove MDN_FILE | |
| E/RILD ( 196): fail to remove MSISDN2_FILE | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| E/RILD ( 196): SetSimOperator: invalid operator | |
| E/RILD ( 196): Failed to get IMSI value. | |
| E/RILD ( 196): AddHandler: Handler already exit. | |
| D/RIL-QMI ( 268): qmuxd: RX 55 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 21] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 196 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 162] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RIL-QMI ( 268): qmuxd: RX 99 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 65] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=133 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=58 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 80 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 46] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=77 | |
| D/RIL-QMI ( 268): qmuxd: RX 55 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 21] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 55 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 21] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=58 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| E/RILD ( 196): OnUnsolicitedResponse: mOemClientReceiver is yet initialized. | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=100 | |
| D/RIL-QMI ( 268): qmuxd: RX 54 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 20] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=95 | |
| D/RIL-QMI ( 268): qmuxd: RX 267 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 233] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=61 | |
| D/RIL-QMI ( 268): qmuxd: RX 54 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 20] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=61 | |
| D/RIL-QMI ( 268): qmuxd: RX 65 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 31] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=107 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 16] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-RAWDATA( 268): Adding client 2, service 227, conn_id=18... | |
| D/RIL-RAWDATA( 268): .... for qmux_client_id = 4, in slot 1, for clnt_srv_info=b72dedf8 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 904 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 12] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=904 | |
| D/RIL-QMI ( 268): qmuxd: RX 58 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 24] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| I/RILC ( 196): libril: new connection | |
| I/RILC ( 196): RIL Daemon version: Samsung RIL v3.0 | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RIL_CONNECTED {7} | |
| D/RILJ ( 1079): [rild] [0003]> RADIO_POWER off | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=58 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=58 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=323 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=323 | |
| D/RILJ ( 1079): [rild] setCellInfoListRate: 2147483647 | |
| D/RILJ ( 1079): [rild] [0004]> RIL_REQUEST_SET_CELL_INFO_LIST_RATE | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_RADIO_STATE_CHANGED RADIO_OFF | |
| D/Dcc ( 1079): DccDefaultState: msg.what=EVENT_RIL_CONNECTED mRilVersion=7 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0005]> SCREEN_STATE: true | |
| D/RilRequest( 1079): [0000]< SET_SUPP_SVC_NOTIFICATION error: com.android.internal.telephony.CommandException: RADIO_NOT_AVAILABLE | |
| D/RilRequest( 1079): [0001]< GET_CURRENT_CALLS error: com.android.internal.telephony.CommandException: RADIO_NOT_AVAILABLE | |
| D/RilRequest( 1079): [0002]< SMS_ACKNOWLEDGE error: com.android.internal.telephony.CommandException: RADIO_NOT_AVAILABLE | |
| D/RilRequest( 1079): [0004]< RIL_REQUEST_SET_CELL_INFO_LIST_RATE error: com.android.internal.telephony.CommandException: REQUEST_NOT_SUPPORTED | |
| D/RILJ ( 1079): [rild] [0006]> RADIO_POWER on | |
| D/PHONE ( 1079): [ServiceState] setNullState=3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 679): getTdScdmaLevel = 0 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 679): getLevel=0 (SignalStrength: 99 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 2147483647 2147483647 gsm|lte 0x0) | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=58 | |
| W/SignalStrength( 924): getTdScdmaLevel = 0 | |
| D/RIL-QMI ( 268): qmuxd: RX 196 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 162] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| W/SignalStrength( 924): getLevel=0 (SignalStrength: 99 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 2147483647 2147483647 gsm|lte 0x0) | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RIL-QMI ( 268): qmuxd: RX 99 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 65] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RIL-QMI ( 268): qmuxd: RX 58 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 24] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0003]< RADIO_POWER | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED | |
| D/RILJ ( 1079): [rild] [0005]< SCREEN_STATE | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED | |
| D/GsmSST ( 1079): [GsmSST_0] Poll ServiceState done: oldSS=[1 1 roaming null null null Unknown:0 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] mNewSS=[3 3 home null null null Unknown:0 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] oldMaxDataCalls=1 mNewMaxDataCalls=1 oldReasonDataDenied=-1 mNewReasonDataDenied=-1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| V/GsmSST ( 1079): hasChanged : true, NetworkStateChangedByRescanDialog : false, isFirstRescanDialogCheckAfterBoot : false | |
| I/GsmSST ( 1079): SelectionMode : null, isBootCompleted : false | |
| I/GsmSST ( 1079): Network State Changed, NO SIM or EONS not loaded: So update Service state display | |
| D/GsmSST ( 1079): [GsmSST_0] updateSpnDisplay: radio is off w/ showPlmn=false plmn=null | |
| D/GsmSST ( 1079): [GsmSST_0] updateSpnDisplay: SIM records are not loaded - plmn='No service' | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/GsmSST ( 1079): [GsmSST_0] operatorNumeric is null | |
| D/GsmSST ( 1079): [GsmSST_0] SystemProperties.get(TelephonyProperties.PROPERTY_OPERATOR_ISROAMING) truess.getRoaming() true, simslot = 0 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=51 | |
| D/RILJ ( 1079): [rild] [0006]< RADIO_POWER | |
| E/RILD ( 196): SetSimOperator: invalid operator | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_RADIO_STATE_CHANGED RADIO_ON | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_SIM_STATUS_CHANGED | |
| D/RILJ ( 1079): Received DEVICE READY NOTIFICATION | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_DEVICE_READY_NOTI | |
| D/RILJ ( 1079): Received DEVICE READY NOTIFICATION | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_DEVICE_READY_NOTI | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=53 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RILJ ( 1079): Received DEVICE READY NOTIFICATION | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_DEVICE_READY_NOTI | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=107 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| E/RILD ( 196): ProcessRxMessage: Not handled(0x21) | |
| D/DCT ( 1079): get all active apn types | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=79 | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 3 - SIM not loaded | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=74 | |
| D/DCT ( 1079): isDataPossible(default): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=true apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): get active apn string for type:default | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): handleMessage msg={ what=270337 when=-172ms obj=android.os.AsyncResult@4306e300 } | |
| D/DCT ( 1079): onRadioAvailable | |
| D/DCT ( 1079): overall state is IDLE | |
| D/RILJ ( 1079): [rild] [0007]> BASEBAND_VERSION | |
| D/RILJ ( 1079): [rild] [0008]> GET_IMEI | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0009]> GET_IMEISV | |
| D/RILJ ( 1079): [rild] [0010]> OPERATOR | |
| D/RILJ ( 1079): [rild] [0011]> DATA_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0012]> VOICE_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0013]> QUERY_NETWORK_SELECTION_MODE | |
| D/RILJ ( 1079): [rild] [0014]> OPERATOR | |
| D/RILJ ( 1079): [rild] [0015]> DATA_REGISTRATION_STATE | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=79 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=51 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=68 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0007]< BASEBAND_VERSION M919UVUEMK2 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=74 | |
| D/RILJ ( 1079): [rild] [0016]> VOICE_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0010]< OPERATOR {null, null, null, null} | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=80 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0017]> QUERY_NETWORK_SELECTION_MODE | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED | |
| D/GSMPhone( 1079): Service state changed | |
| D/GSMPhone( 1079): setEmergencyNumbers: simstateProperty=NOT_READY | |
| D/RILJ ( 1079): [rild] [0018]> OPERATOR | |
| D/RILJ ( 1079): [rild] [0019]> DATA_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0020]> VOICE_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0008]< GET_IMEI | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0011]< DATA_REGISTRATION_STATE {0, 0000, 00000000, 0, null, 4} | |
| D/RILJ ( 1079): [rild] [0021]> QUERY_NETWORK_SELECTION_MODE | |
| D/RIL_UiccController( 1079): Received EVENT_ICC_STATUS_CHANGED, calling getIccCardStatus | |
| D/RILJ ( 1079): [rild] [0022]> GET_SIM_STATUS | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=74 | |
| D/RILJ ( 1079): [rild] [0023]> GET_CURRENT_CALLS | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=80 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RILJ ( 1079): [rild] [0024]> RIL_REQUEST_VOICE_RADIO_TECH | |
| D/RILJ ( 1079): [rild] [0025]> RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE | |
| D/RIL_IccCardProxy_0( 1079): IccCardProxy handleMessage : 2 | |
| D/RIL_UiccController( 1079): Received EVENT_ICC_STATUS_CHANGED, calling getIccCardStatus | |
| D/RILJ ( 1079): [rild] [0026]> GET_SIM_STATUS | |
| D/RILJ ( 1079): [rild] [0027]> RIL_REQUEST_GET_SMSC_ADDRESS | |
| D/RILJ ( 1079): [rild] [0028]> RIL_REQUEST_GET_SMSC_ADDRESS | |
| D/RILJ ( 1079): [rild] [0009]< GET_IMEISV | |
| D/RILJ ( 1079): [rild] [0022]< GET_SIM_STATUS IccCardState {CARDSTATE_PRESENT,PINSTATE_UNKNOWN,num_apps=1,gsm_id=0{APPTYPE_USIM,APPSTATE_READY,pin1=PINSTATE_DISABLED,pin2=PINSTATE_ENABLED_NOT_VERIFIED-3/3/10/10},cmda_id=-1,ims_id=-1} | |
| D/RILJ ( 1079): [rild] [0012]< VOICE_REGISTRATION_STATE {2, 0000, 00000000, 0, null, null, null, null, null, null, null, null, null, null, null} | |
| D/RILJ ( 1079): [rild] [0029]> RIL_REQUEST_GET_SMSC_ADDRESS | |
| D/RIL-QMI ( 268): qmuxd: RX 68 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 34] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSMPhone( 1079): Baseband version: M919UVUEMK2 | |
| D/RILJ ( 1079): [rild] [0030]> OPERATOR | |
| D/RILJ ( 1079): [rild] [0031]> DATA_REGISTRATION_STATE | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0032]> VOICE_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0033]> QUERY_NETWORK_SELECTION_MODE | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=62 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=62 | |
| D/RILJ ( 1079): [rild] [0034]> OPERATOR | |
| D/RILJ ( 1079): [rild] [0035]> DATA_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0036]> VOICE_REGISTRATION_STATE | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=133 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0037]> QUERY_NETWORK_SELECTION_MODE | |
| D/RILJ ( 1079): [rild] [0023]< GET_CURRENT_CALLS | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0026]< GET_SIM_STATUS IccCardState {CARDSTATE_PRESENT,PINSTATE_UNKNOWN,num_apps=1,gsm_id=0{APPTYPE_USIM,APPSTATE_READY,pin1=PINSTATE_DISABLED,pin2=PINSTATE_ENABLED_NOT_VERIFIED-3/3/10/10},cmda_id=-1,ims_id=-1} | |
| D/RIL_UiccController( 1079): Received EVENT_GET_ICC_STATUS_DONE | |
| D/RIL_UiccCard0( 1079): Creating UiccCard | |
| D/RILJ ( 1079): [rild] [0013]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/RIL_UiccCard0( 1079): 1 applications | |
| D/RIL_UiccCardApplication( 1079): Creating UiccApp: {APPTYPE_USIM,APPSTATE_READY,pin1=PINSTATE_DISABLED,pin2=PINSTATE_ENABLED_NOT_VERIFIED-3/3/10/10} | |
| D/RILJ ( 1079): [rild] [0014]< OPERATOR {null, null, null, null} | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RIL-QMI ( 268): qmuxd: RX 93 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 59] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=74 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0015]< DATA_REGISTRATION_STATE {0, 0000, 00000000, 0, null, 4} | |
| D/RILJ ( 1079): [rild] [0027]< RIL_REQUEST_GET_SMSC_ADDRESS "447782000800",145 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=62 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=62 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0016]< VOICE_REGISTRATION_STATE {2, 0000, 00000000, 0, null, null, null, null, null, null, null, null, null, null, null} | |
| D/RIL-QMI ( 268): qmuxd: RX 58 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 24] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSM ( 1079): [SIMRecords_0] SIMRecords: onRadioOffOrNotAvailable set 'gsm.sim.operator.numeric' to operator=null | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL_UiccCardApplication( 1079): Notifying 1 registrant: READY | |
| D/RILJ ( 1079): [rild] [0038]> QUERY_FACILITY_LOCK | |
| D/RILJ ( 1079): [rild] [0039]> QUERY_FACILITY_LOCK | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=74 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RILJ ( 1079): [rild] [0040]> RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING | |
| D/RILJ ( 1079): [rild] [0017]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0028]< RIL_REQUEST_GET_SMSC_ADDRESS "447782000800",145 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RilRequest( 1079): [0025]< RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/RILJ ( 1079): [rild] [0018]< OPERATOR {null, null, null, null} | |
| D/RIL_UiccCard0( 1079): update: radioState=RADIO_ON mLastRadioState=RADIO_UNAVAILABLE | |
| D/RIL_UiccController( 1079): Notifying IccChangedRegistrants | |
| D/RIL_UiccController( 1079): Received EVENT_GET_ICC_STATUS_DONE | |
| D/RIL_UiccCard0( 1079): 1 applications | |
| D/RIL_UiccCardApplication( 1079): APPTYPE_USIM update. New {APPTYPE_USIM,APPSTATE_READY,pin1=PINSTATE_DISABLED,pin2=PINSTATE_ENABLED_NOT_VERIFIED-3/3/10/10} | |
| E/RIL_UiccCardApplication( 1079): in update method | |
| D/RIL_UiccCard0( 1079): update: radioState=RADIO_ON mLastRadioState=RADIO_ON | |
| D/RIL_UiccController( 1079): Notifying IccChangedRegistrants | |
| V/GSM ( 1079): onReady | |
| V/GSM ( 1079): fetchSimRecords:before SystemProperties.get() | |
| D/GSM ( 1079): [SIMRecords_0] fetchSimRecords 0 | |
| D/RILJ ( 1079): [rild] [0041]> getIMSI: GET_IMSI aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RILJ ( 1079): [rild] [0040]< RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RILJ ( 1079): [rild] [0042]> iccIO: SIM_IO 0xc0 0x2fe2 path: 3F00,0,0,15 aid: xxx | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0019]< DATA_REGISTRATION_STATE {0, 0000, 00000000, 0, null, 4} | |
| D/RILJ ( 1079): [rild] [0043]> iccIO: SIM_IO 0xc0 0x6f02 path: 3F007F43,0,0,15 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=74 | |
| D/RILJ ( 1079): [rild] [0044]> iccIO: SIM_IO 0xc0 0x6f3e path: 3F007FFF,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0045]> iccIO: SIM_IO 0xc0 0x6f40 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RIL-QMI ( 268): qmuxd: RX 60 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 26] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0029]< RIL_REQUEST_GET_SMSC_ADDRESS "447782000800",145 | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 59 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 25] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0046]> iccIO: SIM_IO 0xc0 0x6fc9 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0020]< VOICE_REGISTRATION_STATE {2, 0000, 00000000, 0, null, null, null, null, null, null, null, null, null, null, null} | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=73 | |
| D/RILJ ( 1079): [rild] [0047]> iccIO: SIM_IO 0xc0 0x6fad path: 3F007FFF,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0021]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/RILJ ( 1079): [rild] [0024]< RIL_REQUEST_VOICE_RADIO_TECH {3} | |
| D/RILJ ( 1079): [rild] [0030]< OPERATOR {null, null, null, null} | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RILJ ( 1079): [rild] [0048]> iccIO: SIM_IO 0xc0 0x6f38 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0049]> iccIO: SIM_IO 0xc0 0x6fca path: 3F007FFF,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0050]> iccIO: SIM_IO 0xc0 0x6f11 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0051]> iccIO: SIM_IO 0xc0 0x6fcb path: 3F007FFF,0,0,15 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0041]< GET_IMSI | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=222 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=35 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=31 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=30 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=2f | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=2d | |
| E/RILD ( 196): OnImsiReadyForEri(): CDMA ModelProxy is not used. | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0052]> iccIO: SIM_IO 0xc0 0x6f13 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0053]> iccIO: SIM_IO 0xc0 0x6f46 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0054]> iccIO: SIM_IO 0xc0 0x6fcd path: 3F007FFF,0,0,15 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=118 | |
| D/RILJ ( 1079): [rild] [0055]> iccIO: SIM_IO 0xc0 0x6fc6 path: 3F007FFF,0,0,15 aid: xxx | |
| D/use-Rlog/RLOG-RIL_ATD( 272): try to connect RIL | |
| D/use-Rlog/RLOG-RIL_ATD( 272): connection success | |
| D/use-Rlog/RLOG-RIL_ATD( 272): Send Msg [ATD > RIL] 4 bytes <> | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/use-Rlog/RLOG-RIL_ATD( 272): SetAtdStatus(), 1_0_0 | |
| D/use-Rlog/RLOG-RIL_ATD( 272): SERIALNO: RV1D57HD42E | |
| D/use-Rlog/RLOG-RIL_ATD( 272): ril.serialnumber: RV1D57HD42E | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/use-Rlog/RLOG-RIL_ATD( 272): Send Msg [ATD > UART] 15 bytes <(\r)(\n)+UART READY(\r)(\n)> | |
| D/use-Rlog/RLOG-RIL_ATD( 272): ListenFD() | |
| D/use-Rlog/RLOG-RIL_ATD( 272): InitSocketMessageHandler(): DiagApp, id(2), fd(17) | |
| D/use-Rlog/RLOG-RIL_ATD( 272): IsUartUsingAP is AP | |
| D/use-Rlog/RLOG-RIL_ATD( 272): Send Msg [UART > ATD] 2 bytes <> | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RILJ ( 1079): [rild] [0056]> iccIO: SIM_IO 0xc0 0x6fc5 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0057]> iccIO: SIM_IO 0xc0 0x6f38 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0031]< DATA_REGISTRATION_STATE {0, 0000, 00000000, 0, null, 4} | |
| D/RILJ ( 1079): [rild] [0058]> iccIO: SIM_IO 0xc0 0x6f16 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=117 | |
| D/RILJ ( 1079): [rild] [0059]> iccIO: SIM_IO 0xc0 0x6f15 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0032]< VOICE_REGISTRATION_STATE {2, 0000, 00000000, 0, null, null, null, null, null, null, null, null, null, null, null} | |
| D/RILJ ( 1079): [rild] [0060]> iccIO: SIM_IO 0xc0 0x6f02 path: 3F007F43,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0033]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=120 | |
| D/RILJ ( 1079): [rild] [0061]> iccIO: SIM_IO 0xc0 0x6fe5 path: 3F007F10,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0042]< SIM_IO IccIoResponse xx xx | |
| D/GSM ( 1079): [SIMRecords_0] fetchSimRecords 21 requested: true | |
| D/GSM ( 1079): [Voicemail] create VoiceMailcontacts after sim loading. | |
| E/use-Rlog/RLOG-GSM( 1079): [Voicemail] loadVoiceMail | |
| W/use-Rlog/RLOG-GSM( 1079): Can't open /data/misc/radio/voicemail-conf.xml | |
| D/RILJ ( 1079): [rild] [0034]< OPERATOR {null, null, null, null} | |
| D/RILJ ( 1079): [rild] [0062]> RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RilRequest( 1079): [0043]< SIM_IO error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/RILJ ( 1079): [rild] [0035]< DATA_REGISTRATION_STATE {0, 0000, 00000000, 0, null, 4} | |
| D/RILJ ( 1079): [rild] [0044]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0045]< SIM_IO IccIoResponse xx xx | |
| D/CdmaSSM ( 1079): CDMA_SUBSCRIPTION_SOURCE event = 2 | |
| W/CdmaSSM ( 1079): Unable to get CDMA Subscription Source, Exception: com.android.internal.telephony.CommandException: GENERIC_FAILURE, result: null | |
| D/GSMPhone( 1079): [GSMPhone] New Uicc application found | |
| E/GsmSST ( 1079): ruimUiccApplication is null | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=120 | |
| D/GsmSST ( 1079): [GsmSST_0] New card found | |
| D/RIL_UiccCardApplication( 1079): Notifying 1 registrant: READY | |
| D/DCT ( 1079): handleMessage msg={ what=270369 when=-124ms obj=android.os.AsyncResult@430ac7b8 } | |
| D/DCT ( 1079): New records found | |
| D/RIL_IccCardProxy_0( 1079): IccCardProxy handleMessage : 3 | |
| D/RIL_IccCardProxy_0( 1079): Icc changed. Reregestering. | |
| D/RIL_UiccCardApplication( 1079): Notifying 1 registrant: READY | |
| D/RIL_IccCardProxy_0( 1079): Broadcasting intent ACTION_SIM_STATE_CHANGED READY reason null SIM SLOT 0 | |
| E/GsmSST ( 1079): ruimUiccApplication is null | |
| D/DCT ( 1079): handleMessage msg={ what=270369 when=-121ms obj=android.os.AsyncResult@430adcd8 } | |
| D/RIL_IccCardProxy_0( 1079): IccCardProxy handleMessage : 3 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=118 | |
| D/PhoneProxy( 1079): [PhoneProxy] Ignoring voice radio technology changed message. newVoiceRadioTech = 3 Active Phone = GSM | |
| E/GSM ( 1079): [SIMRecords_0] EVENT_GET_IMSI_DONE | |
| D/GSM ( 1079): [SIMRecords_0] IMSI: xxxxxxx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=58 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=118 | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 20 requested: true | |
| D/RILJ ( 1079): [rild] [0063]> iccIO: SIM_IO 0xb0 0x2fe2 path: 3F00,0,0,10 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=120 | |
| D/PHONE ( 1079): [ServiceState] setDataRegState=1 | |
| D/PHONE ( 1079): [ServiceState] setDataRadioTechnology=0 | |
| D/GsmSST ( 1079): [GsmSST_0] handlPollStateResultMessage: GsmSST setDataRegState=1 regState=0 dataRadioTechnology=0 | |
| D/RILJ ( 1079): [rild] [0064]> iccIO: SIM_IO 0xb0 0x6f3e path: 3F007FFF,0,0,2 aid: xxx | |
| D/RILJ ( 1079): [rild] [0065]> iccIO: SIM_IO 0xb2 0x6f40 path: 3F007FFF,1,4,34 aid: xxx | |
| D/RILJ ( 1079): [rild] [0066]> OPERATOR | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| D/RILJ ( 1079): [rild] [0062]< RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0067]> DATA_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0036]< VOICE_REGISTRATION_STATE {2, 0000, 00000000, 0, null, null, null, null, null, null, null, null, null, null, null} | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0046]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0047]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0038]< QUERY_FACILITY_LOCK {0} | |
| D/RILJ ( 1079): [rild] [0048]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0049]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0037]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/RILJ ( 1079): [rild] [0039]< QUERY_FACILITY_LOCK {0} | |
| D/RILJ ( 1079): [rild] [0066]< OPERATOR {null, null, null, null} | |
| D/RILJ ( 1079): [rild] [0068]> VOICE_REGISTRATION_STATE | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RILJ ( 1079): [rild] [0069]> QUERY_NETWORK_SELECTION_MODE | |
| D/RIL_IccCardProxy_0( 1079): IccCardProxy handleMessage : 6 | |
| D/RILJ ( 1079): [rild] [0070]> iccIO: SIM_IO 0xc0 0x6fb7 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RILJ ( 1079): [rild] [0071]> SMS_ACKNOWLEDGE true 0 | |
| D/RILJ ( 1079): [rild] [0072]> OEM_HOOK_RAW[****] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=120 | |
| D/RIL_IccCardProxy_0( 1079): IccCardProxy handleMessage : 8 | |
| D/RIL_IccCardProxy_0( 1079): Broadcasting intent ACTION_SIM_STATE_CHANGED IMSI reason null SIM SLOT 0 | |
| D/GSM ( 1079): [SIMRecords_0] EF_ISIM_IMPI LOADED | |
| E/GSM ( 1079): [SIMRecords_0] Record Load Exception: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 19 requested: true | |
| D/RILJ ( 1079): [rild] [0073]> iccIO: SIM_IO 0xb2 0x6fc9 path: 3F007FFF,1,4,5 aid: xxx | |
| D/RILJ ( 1079): [rild] [0074]> iccIO: SIM_IO 0xb0 0x6fad path: 3F007FFF,0,0,4 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| E/RILD ( 196): DoSmsAcknowledge: no message to ack found. | |
| D/RIL_UiccCardApplication( 1079): Query facility lock : false | |
| D/RIL-QMI ( 268): qmuxd: RX 64 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 30] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RilRequest( 1079): [0071]< SMS_ACKNOWLEDGE error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/RilRequest( 1079): [0050]< SIM_IO error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/RILJ ( 1079): [rild] [0067]< DATA_REGISTRATION_STATE {0, 0000, 00000000, 0, null, 4} | |
| D/RILJ ( 1079): [rild] [0051]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0075]> iccIO: SIM_IO 0xb0 0x6f38 path: 3F007FFF,0,0,10 aid: xxx | |
| D/RILJ ( 1079): [rild] [0076]> iccIO: SIM_IO 0xb2 0x6fca path: 3F007FFF,1,4,6 aid: xxx | |
| D/RIL_UiccCardApplication( 1079): Query facility lock : 0 | |
| D/RILJ ( 1079): [rild] [0077]> SMS_ACKNOWLEDGE true 0 | |
| D/PHONE ( 1079): [ServiceState] setDataRegState=1 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/PHONE ( 1079): [ServiceState] setDataRadioTechnology=0 | |
| D/GsmSST ( 1079): [GsmSST_0] handlPollStateResultMessage: GsmSST setDataRegState=1 regState=0 dataRadioTechnology=0 | |
| D/RILJ ( 1079): [rild] [0078]> iccIO: SIM_IO 0xb2 0x6fcb path: 3F007FFF,1,4,16 aid: xxx | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 18 requested: true | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=121 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=121 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=118 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=86 | |
| E/RILD ( 196): DoSmsAcknowledge: no message to ack found. | |
| D/RilRequest( 1079): [0077]< SMS_ACKNOWLEDGE error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/RilRequest( 1079): [0052]< SIM_IO error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/RILJ ( 1079): [rild] [0068]< VOICE_REGISTRATION_STATE {2, 0000, 00000000, 0, null, null, null, null, null, null, null, null, null, null, null} | |
| D/RIL-QMI ( 268): qmuxd: RX 67 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 33] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 17 requested: true | |
| D/RilRequest( 1079): [0053]< SIM_IO error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/PHONE ( 1079): [ServiceState] setVoiceRegState=1 | |
| E/PHONE ( 1079): [ServiceState] setState deprecated use setVoiceRegState() | |
| I/GsmSST ( 1079): handlePollStateResult(); regState: 2, mNewLuRejCause: -1 | |
| D/RilRequest( 1079): [0054]< SIM_IO error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/RILJ ( 1079): [rild] [0079]> iccIO: SIM_IO 0xc0 0x6f14 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 17 requested: true | |
| D/RILJ ( 1079): [rild] [0069]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 16 requested: true | |
| D/RILJ ( 1079): [rild] [0055]< SIM_IO IccIoResponse xx xx | |
| D/GsmSST ( 1079): [GsmSST_0] Poll ServiceState done: oldSS=[3 3 roaming null null null Unknown:0 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] mNewSS=[1 1 home null null null Unknown:0 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] oldMaxDataCalls=1 mNewMaxDataCalls=4 oldReasonDataDenied=-1 mNewReasonDataDenied=-1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| V/GsmSST ( 1079): hasChanged : true, NetworkStateChangedByRescanDialog : false, isFirstRescanDialogCheckAfterBoot : false | |
| I/GsmSST ( 1079): SelectionMode : null, isBootCompleted : false | |
| I/GsmSST ( 1079): Network State Changed, NO SIM or EONS not loaded: So update Service state display | |
| D/GSM ( 1079): [getDisplayRule] SPN service disabled (EF_UST) | |
| D/GsmSST ( 1079): [GsmSST_0] updateSpnDisplay: radio is on but out of service, set plmn='No service' | |
| D/GSM ( 1079): [getDisplayRule] SPN service disabled (EF_UST) | |
| D/GsmSST ( 1079): [GsmSST_0] updateSpnDisplay: SIM records are not loaded - plmn='No service' | |
| D/RILJ ( 1079): [rild] [0056]< SIM_IO IccIoResponse xx xx | |
| D/GsmSST ( 1079): [GsmSST_0] operatorNumeric is null | |
| D/GsmSST ( 1079): [GsmSST_0] SystemProperties.get(TelephonyProperties.PROPERTY_OPERATOR_ISROAMING) truess.getRoaming() true, simslot = 0 | |
| D/RILJ ( 1079): [rild] [0057]< SIM_IO IccIoResponse xx xx | |
| D/RilRequest( 1079): [0058]< SIM_IO error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/DCT ( 1079): get all active apn types | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RilRequest( 1079): [0059]< SIM_IO error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 - SIM not loaded | |
| D/DCT ( 1079): isDataPossible(default): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=true apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:default | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=null | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[0,0,-1] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RILJ ( 1079): [rild] [0080]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,1,4,8 aid: xxx | |
| D/RilRequest( 1079): [0072]< OEM_HOOK_RAW error: com.android.internal.telephony.CommandException: NO_SUCH_ELEMENT | |
| D/GSMPhone( 1079): Service state changed | |
| D/GSMPhone( 1079): setEmergencyNumbers: simstateProperty=READY | |
| D/RILJ ( 1079): [rild] [0081]> iccIO: SIM_IO 0xb2 0x6fc5 path: 3F007FFF,1,4,20 aid: xxx | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[0,0,-1] | |
| D/RILJ ( 1079): [rild] [0082]> iccIO: SIM_IO 0xb0 0x6f38 path: 3F007FFF,0,0,10 aid: xxx | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 15 requested: true | |
| E/GSM ( 1079): [SIMRecords_0] Exception in fetching EF_CSP data com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 14 requested: true | |
| D/RILJ ( 1079): [rild] [0083]> OEM_HOOK_RAW[****] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 67 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 33] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RilRequest( 1079): [0060]< SIM_IO error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSM ( 1079): getting EF_PERSO have exception !!!! | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 13 requested: true | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RilRequest( 1079): [0061]< SIM_IO error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/GSM ( 1079): getting isAvailablePSISMSC have exception !!!! | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 12 requested: true | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=74 | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0063]< SIM_IO IccIoResponse xx xx | |
| D/GSM ( 1079): mIccId: 8944200010261017493 | |
| D/GSM ( 1079): checkSimChanged enter | |
| I/GSM ( 1079): old iccid is current is 8944200010261017493 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=66 | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0064]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=98 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=121 | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 11 requested: true | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0065]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0070]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=69 | |
| D/RILJ ( 1079): [rild] [0073]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=68 | |
| D/RILJ ( 1079): [rild] [0074]< SIM_IO IccIoResponse xx xx | |
| D/GSM ( 1079): [SIMRecords_0] SimRecord: Load gid1 done: 3 | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 10 requested: true | |
| D/RILJ ( 1079): [rild] [0084]> iccIO: SIM_IO 0xb2 0x6fb7 path: 3F007FFF,1,4,21 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=74 | |
| E/RILD ( 196): Invalid service(90) | |
| D/RILJ ( 1079): [rild] [0075]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[0,0,-1] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=70 | |
| D/RILJ ( 1079): [rild] [0076]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RilRequest( 1079): [0083]< OEM_HOOK_RAW error: com.android.internal.telephony.CommandException: NO_SUCH_ELEMENT | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=80 | |
| D/RILJ ( 1079): [rild] [0078]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RilRequest( 1079): [0079]< SIM_IO error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/GSM ( 1079): [SIMRecords_0] EF_MBI: 0100000000 | |
| D/GSM ( 1079): [SIMRecords_0] Got valid mailbox number for MBDN | |
| D/RILJ ( 1079): [rild] [0085]> iccIO: SIM_IO 0xc0 0x6fc7 path: 3F007FFF,0,0,15 aid: xxx | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 10 requested: true | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSM ( 1079): [SIMRecords_0] EF_AD: 00000002 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0080]< SIM_IO IccIoResponse xx xx | |
| D/MccTable( 1079): updateMccMncConfiguration: mcc=234, mnc=20 | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/MccTable( 1079): locale set to en_gb | |
| D/MccTable( 1079): ril.isIccChanged = 1 | |
| D/MccTable( 1079): WIFI_COUNTRY_CODE set to gb | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=84 | |
| D/RILJ ( 1079): [rild] [0081]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=74 | |
| E/RILD ( 196): Invalid service(90) | |
| D/RILJ ( 1079): [rild] [0082]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=85 | |
| D/RILJ ( 1079): [rild] [0084]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=120 | |
| D/RILJ ( 1079): [rild] [0085]< SIM_IO IccIoResponse xx xx | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 9 requested: true | |
| D/GSM ( 1079): [SIMRecords_0] MSISDN: xxxxxxx | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 8 requested: true | |
| D/RILJ ( 1079): [rild] [0086]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,2,4,8 aid: xxx | |
| D/RILJ ( 1079): [rild] [0087]> iccIO: SIM_IO 0xb2 0x6fc5 path: 3F007FFF,2,4,20 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0086]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=84 | |
| D/RILJ ( 1079): [rild] [0087]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0088]> iccIO: SIM_IO 0xb2 0x6fb7 path: 3F007FFF,2,4,21 aid: xxx | |
| D/RILJ ( 1079): [rild] [0089]> iccIO: SIM_IO 0xb2 0x6fc7 path: 3F007FFF,1,4,34 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| I/GSM ( 1079): iccType =2 | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSM ( 1079): [SIMRecords_0] UST : UsimServiceTable[80]={ FDN, FDN_EXTENSION, SDN, SDN_EXTENSION, BDN, BDN_EXTENSION, SM_STORAGE, SM_STATUS_REPORTS, SM_SERVICE_PARAMS, CAP_CONFIG_PARAMS_2, CB_MESSAGE_ID, CB_MESSAGE_ID_RANGES, GROUP_ID_LEVEL_1, MSISDN, GSM_ACCESS, DATA_DL_VIA_SMS_PP, DATA_DL_VIA_SMS_CB, IGNORED_1, ENABLED_SERVICES_TABLE, APN_CONTROL_LIST, GSM_SECURITY_CONTEXT, OPERATOR_PLMN_SELECT, HPLMN_SELECT, PLMN_NETWORK_NAME, OPERATOR_PLMN_LIST, MBDN, MWI_STATUS, CFI_STATUS, MMS_NOTIFICATION, MMS_NOTIFICATION_EXTENSION, MMS_CONNECTIVITY_PARAMS } | |
| I/GSM ( 1079): Enter checkSMSPavailable | |
| I/GSM ( 1079): isAvailableSMSP is true | |
| I/GSM ( 1079): Enter checkEONS | |
| I/GSM ( 1079): isEnabledPNN is true | |
| I/GSM ( 1079): isEnabledOPL is true | |
| I/GSM ( 1079): Enter checkFDNavailable | |
| I/GSM ( 1079): isAvailableFDN is true | |
| I/GSM ( 1079): Enter checkCHV1available | |
| I/GSM ( 1079): 3G - CHV1 available | |
| I/GSM ( 1079): isAvailableCHV1 is true | |
| I/GSM ( 1079): Enter checkSPNavailable | |
| I/GSM ( 1079): isAvailableSPN is false | |
| I/GSM ( 1079): Enter checkMSISDNavailable | |
| D/RILJ ( 1079): [rild] [0090]> iccIO: SIM_IO 0xc0 0x6f40 path: 3F007FFF,0,0,15 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=85 | |
| D/RILJ ( 1079): [rild] [0088]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=98 | |
| I/GSM ( 1079): isAvailableMSISDN is true | |
| I/GSM ( 1079): Enter checkSMSavailable | |
| I/GSM ( 1079): isAvailableSMS is true | |
| I/GSM ( 1079): Enter checkMBDNavailable | |
| I/GSM ( 1079): isAvailableMBDN is true | |
| D/RILJ ( 1079): [rild] [0089]< SIM_IO IccIoResponse xx xx | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0091]> iccIO: SIM_IO 0xc0 0x6fc9 path: 3F007FFF,0,0,15 aid: xxx | |
| I/GSM ( 1079): Enter checkMWIS | |
| I/GSM ( 1079): isAvailableMWIS is true | |
| I/GSM ( 1079): Enter checkCFIS | |
| I/GSM ( 1079): isAvailableCFIS is true | |
| I/GSM ( 1079): Enter checkPSISMSCavailable | |
| E/UsimServiceTable( 1079): isAvailable for service 91 fails, max service is 80 | |
| I/GSM ( 1079): isAvailablePSISMSC is false | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 9 requested: true | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSM ( 1079): [SIMRecords_0] EF_MWIS: 000000000000 | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 8 requested: true | |
| D/GSM ( 1079): [SIMRecords_0] EF_CFIS: ff00ffffffffffffffffffffffffffff | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 7 requested: true | |
| I/GSM ( 1079): [handleMessage] EVENT_GET_SPN_CPHS_DONE | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=120 | |
| D/RILJ ( 1079): [rild] [0090]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0092]> iccIO: SIM_IO 0xc0 0x6f18 path: 3F007FFF,0,0,15 aid: xxx | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 7 requested: true | |
| D/GSM ( 1079): [getDisplayRule] SPN service disabled (EF_UST) | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GsmSST ( 1079): [GsmSST_0] updateSpnDisplay: radio is on but out of service, set plmn='No service' | |
| D/GSM ( 1079): [getDisplayRule] SPN service disabled (EF_UST) | |
| D/GsmSST ( 1079): [GsmSST_0] updateSpnDisplay: SIM records are not loaded - plmn='No service' | |
| D/RILJ ( 1079): [rild] [0093]> OEM_HOOK_RAW[****] | |
| I/GSM ( 1079): iccType =2 | |
| D/RIL-QMI ( 268): qmuxd: RX 67 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 33] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=120 | |
| D/RILJ ( 1079): [rild] [0091]< SIM_IO IccIoResponse xx xx | |
| D/GSM ( 1079): [SIMRecords_0] UST : UsimServiceTable[80]={ FDN, FDN_EXTENSION, SDN, SDN_EXTENSION, BDN, BDN_EXTENSION, SM_STORAGE, SM_STATUS_REPORTS, SM_SERVICE_PARAMS, CAP_CONFIG_PARAMS_2, CB_MESSAGE_ID, CB_MESSAGE_ID_RANGES, GROUP_ID_LEVEL_1, MSISDN, GSM_ACCESS, DATA_DL_VIA_SMS_PP, DATA_DL_VIA_SMS_CB, IGNORED_1, ENABLED_SERVICES_TABLE, APN_CONTROL_LIST, GSM_SECURITY_CONTEXT, OPERATOR_PLMN_SELECT, HPLMN_SELECT, PLMN_NETWORK_NAME, OPERATOR_PLMN_LIST, MBDN, MWI_STATUS, CFI_STATUS, MMS_NOTIFICATION, MMS_NOTIFICATION_EXTENSION, MMS_CONNECTIVITY_PARAMS } | |
| I/GSM ( 1079): Enter checkSMSPavailable | |
| I/GSM ( 1079): isAvailableSMSP is true | |
| I/GSM ( 1079): Enter checkEONS | |
| I/GSM ( 1079): isEnabledPNN is true | |
| I/GSM ( 1079): isEnabledOPL is true | |
| I/GSM ( 1079): Enter checkFDNavailable | |
| I/GSM ( 1079): isAvailableFDN is true | |
| I/GSM ( 1079): Enter checkCHV1available | |
| I/GSM ( 1079): 3G - CHV1 available | |
| I/GSM ( 1079): isAvailableCHV1 is true | |
| I/GSM ( 1079): Enter checkSPNavailable | |
| I/GSM ( 1079): isAvailableSPN is false | |
| I/GSM ( 1079): Enter checkMSISDNavailable | |
| D/RILJ ( 1079): [rild] [0094]> iccIO: SIM_IO 0xc0 0x6f40 path: 3F007FFF,0,0,15 aid: xxx | |
| I/GSM ( 1079): isAvailableMSISDN is true | |
| I/GSM ( 1079): Enter checkSMSavailable | |
| I/GSM ( 1079): isAvailableSMS is true | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| I/GSM ( 1079): Enter checkMBDNavailable | |
| I/GSM ( 1079): isAvailableMBDN is true | |
| D/RILJ ( 1079): [rild] [0095]> iccIO: SIM_IO 0xc0 0x6fc9 path: 3F007FFF,0,0,15 aid: xxx | |
| I/GSM ( 1079): Enter checkMWIS | |
| I/GSM ( 1079): isAvailableMWIS is true | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| I/GSM ( 1079): Enter checkCFIS | |
| I/GSM ( 1079): isAvailableCFIS is true | |
| I/GSM ( 1079): Enter checkPSISMSCavailable | |
| E/UsimServiceTable( 1079): isAvailable for service 91 fails, max service is 80 | |
| I/GSM ( 1079): isAvailablePSISMSC is false | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 8 requested: true | |
| D/RILJ ( 1079): [rild] [0096]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,3,4,8 aid: xxx | |
| D/RILJ ( 1079): [rild] [0097]> iccIO: SIM_IO 0xb2 0x6fc5 path: 3F007FFF,3,4,20 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/RILJ ( 1079): [rild] [0098]> iccIO: SIM_IO 0xb2 0x6fb7 path: 3F007FFF,3,4,21 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[0,0,-1] | |
| D/RilRequest( 1079): [0092]< SIM_IO error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/RILJ ( 1079): [rild] [0099]> iccIO: SIM_IO 0xb2 0x6f40 path: 3F007FFF,1,4,34 aid: xxx | |
| D/RILJ ( 1079): [rild] [0100]> iccIO: SIM_IO 0xb2 0x6fc9 path: 3F007FFF,1,4,5 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSM ( 1079): [SIMRecords_0] VM: ADN Record 'Mail' '+447782333123 null' EF[MBDN] | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 7 requested: true | |
| I/GSM ( 1079): [handleMessage] EVENT_GET_SPN_SHORT_CPHS_DONE | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 6 requested: true | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RilRequest( 1079): [0093]< OEM_HOOK_RAW error: com.android.internal.telephony.CommandException: NO_SUCH_ELEMENT | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[0,0,-1] | |
| D/RILJ ( 1079): [rild] [0101]> OEM_HOOK_RAW[****] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=120 | |
| D/RILJ ( 1079): [rild] [0094]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0102]> iccIO: SIM_IO 0xb2 0x6f40 path: 3F007FFF,1,4,34 aid: xxx | |
| E/RILD ( 196): Invalid AID | |
| D/RIL-QMI ( 268): qmuxd: RX 55 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 21] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=120 | |
| D/RILJ ( 1079): [rild] [0095]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0103]> iccIO: SIM_IO 0xb2 0x6fc9 path: 3F007FFF,1,4,5 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0096]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0104]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,4,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=84 | |
| D/RILJ ( 1079): [rild] [0097]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0105]> iccIO: SIM_IO 0xb2 0x6fc5 path: 3F007FFF,4,4,20 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=85 | |
| D/RILJ ( 1079): [rild] [0098]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0106]> iccIO: SIM_IO 0xb2 0x6fb7 path: 3F007FFF,4,4,21 aid: xxx | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=98 | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[0,0,-1] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=69 | |
| D/RILJ ( 1079): [rild] [0099]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0100]< SIM_IO IccIoResponse xx xx | |
| D/GSM ( 1079): [SIMRecords_0] MSISDN: xxxxxxx | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 5 requested: true | |
| D/GSM ( 1079): [SIMRecords_0] EF_MBI: 0100000000 | |
| D/GSM ( 1079): [SIMRecords_0] Got valid mailbox number for MBDN | |
| D/RILJ ( 1079): [rild] [0107]> iccIO: SIM_IO 0xc0 0x6fc7 path: 3F007FFF,0,0,15 aid: xxx | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 5 requested: true | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RilRequest( 1079): [0101]< OEM_HOOK_RAW error: com.android.internal.telephony.CommandException: NO_SUCH_ELEMENT | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=98 | |
| D/RILJ ( 1079): [rild] [0102]< SIM_IO IccIoResponse xx xx | |
| D/GSM ( 1079): [SIMRecords_0] MSISDN: xxxxxxx | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 4 requested: true | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=69 | |
| D/RILJ ( 1079): [rild] [0103]< SIM_IO IccIoResponse xx xx | |
| D/GSM ( 1079): [SIMRecords_0] EF_MBI: 0100000000 | |
| D/GSM ( 1079): [SIMRecords_0] Got valid mailbox number for MBDN | |
| D/RILJ ( 1079): [rild] [0108]> iccIO: SIM_IO 0xc0 0x6fc7 path: 3F007FFF,0,0,15 aid: xxx | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 4 requested: true | |
| D/RIL-QMI ( 268): qmuxd: RX 62 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 28] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0104]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0109]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,5,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=84 | |
| D/RILJ ( 1079): [rild] [0105]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0110]> iccIO: SIM_IO 0xb2 0x6fc5 path: 3F007FFF,5,4,20 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=85 | |
| D/RILJ ( 1079): [rild] [0106]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0111]> iccIO: SIM_IO 0xb2 0x6fb7 path: 3F007FFF,5,4,21 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=120 | |
| D/RILJ ( 1079): [rild] [0107]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0112]> iccIO: SIM_IO 0xb2 0x6fc7 path: 3F007FFF,1,4,34 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=120 | |
| D/RILJ ( 1079): [rild] [0108]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0113]> iccIO: SIM_IO 0xb2 0x6fc7 path: 3F007FFF,1,4,34 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0109]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0114]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,6,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=84 | |
| D/RILJ ( 1079): [rild] [0110]< SIM_IO IccIoResponse xx xx | |
| I/GSM ( 1079): [handleMessage] EVENT_GET_PNN_DONE | |
| I/GSM ( 1079): [handlePnns] Load PNN Value[0] = 3 | |
| I/GSM ( 1079): [handlePnns] Load PNN Value[1] = 3 IRL | |
| I/GSM ( 1079): [handlePnns] Load PNN Value[2] = null | |
| I/GSM ( 1079): [handlePnns] Load PNN Value[3] = null | |
| I/GSM ( 1079): [handlePnns] Load PNN Value[4] = null | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 3 requested: true | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=85 | |
| D/RILJ ( 1079): [rild] [0111]< SIM_IO IccIoResponse xx xx | |
| D/RIL_IccCardProxy_0( 1079): IccCardProxy handleMessage : 200 | |
| D/RIL_IccCardProxy_0( 1079): read3GEccList: 999/0,112/0 | |
| D/GSMPhone( 1079): setEmergencyNumbers: simstateProperty=READY | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=98 | |
| D/RILJ ( 1079): [rild] [0112]< SIM_IO IccIoResponse xx xx | |
| D/GSM ( 1079): [SIMRecords_0] VM: ADN Record 'Mail' '+447782333123 null' EF[MBDN] | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 2 requested: true | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=98 | |
| D/RILJ ( 1079): [rild] [0113]< SIM_IO IccIoResponse xx xx | |
| D/GSM ( 1079): [SIMRecords_0] VM: ADN Record 'Mail' '+447782333123 null' EF[MBDN] | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 1 requested: true | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0114]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0115]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,7,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0115]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0116]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,8,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0116]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0117]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,9,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0117]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0118]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,10,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0118]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0119]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,11,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0119]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0120]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,12,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0120]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0121]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,13,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0121]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0122]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,14,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0122]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0123]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,15,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0123]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0124]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,16,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0124]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0125]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,17,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0125]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0126]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,18,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0126]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0127]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,19,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0127]< SIM_IO IccIoResponse xx xx | |
| D/RILJ ( 1079): [rild] [0128]> iccIO: SIM_IO 0xb2 0x6fc6 path: 3F007FFF,20,4,8 aid: xxx | |
| D/RIL-QMI ( 268): qmuxd: RX 69 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 35] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=72 | |
| D/RILJ ( 1079): [rild] [0128]< SIM_IO IccIoResponse xx xx | |
| I/GSM ( 1079): [handleMessage] EVENT_GET_OPL_DONE | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Data(Not Null) | |
| I/IccUtils( 1079): [MccMncConvert] Convert Result :23420 | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[0]=23420 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[0]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[0]=65534 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[0]=1 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Data(Not Null) | |
| I/IccUtils( 1079): [MccMncConvert] Convert Result :23433 | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[1]=23433 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[1]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[1]=65534 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[1]=1 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Data(Not Null) | |
| I/IccUtils( 1079): [MccMncConvert] Convert Result :27205 | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[2]=27205 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[2]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[2]=65534 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[2]=2 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[3]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[3]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[3]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[3]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[4]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[4]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[4]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[4]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[5]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[5]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[5]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[5]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[6]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[6]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[6]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[6]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[7]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[7]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[7]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[7]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[8]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[8]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[8]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[8]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[9]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[9]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[9]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[9]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[10]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[10]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[10]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[10]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[11]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[11]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[11]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[11]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[12]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[12]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[12]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[12]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[13]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[13]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[13]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[13]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[14]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[14]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[14]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[14]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[15]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[15]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[15]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[15]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[16]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[16]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[16]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[16]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[17]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[17]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[17]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[17]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[18]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[18]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[18]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[18]=0 | |
| I/GSM ( 1079): [handleOPL] EF_OPL contains Null | |
| I/GSM ( 1079): [handleOPL]Load OPL_MCCMNC[19]=null | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC1[19]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_LAC2[19]=0 | |
| I/GSM ( 1079): [handleOPL]Load OPL_INDEX[19]=0 | |
| D/GSM ( 1079): [SIMRecords_0] onRecordLoaded 0 requested: true | |
| D/GSM ( 1079): [SIMRecords_0] SIMRecords: onAllRecordsLoaded set 'gsm.sim.operator.numeric' to operator='23420' | |
| D/GSM ( 1079): get phone shared preference | |
| D/GSM ( 1079): [SIMRecords_0] Broadcast intent AUTO_PRECONFIG | |
| D/GSM ( 1079): setVoiceMailByCountry: NetworkName = 23420 | |
| D/GSM ( 1079): [SIMRecords_0] getO2payState SIMState[READY] MCCMNC[23420] | |
| D/GSM ( 1079): [SIMRecords_0] perso null | |
| D/GSM ( 1079): [SIMRecords_0] SIM state is not READY or SIM card is not O2 SIM | |
| D/GSM ( 1079): [SIMRecords_0] The result of getO2payState is NOT_READY | |
| D/GSM ( 1079): O2 paystate [ 0 ] | |
| D/GSM ( 1079): [SIMRecords_0] getO2payState SIMState[READY] MCCMNC[23420] | |
| D/GSM ( 1079): [SIMRecords_0] perso null | |
| D/GSM ( 1079): [SIMRecords_0] SIM state is not READY or SIM card is not O2 SIM | |
| D/GSM ( 1079): [SIMRecords_0] The result of getO2payState is NOT_READY | |
| D/GSMPhone( 1079): updateCurrentCarrierInProvider: mIccRecords.getOperatorNumeric=23420 | |
| I/GSMPhone( 1079): updateMessageWaitingIndicatorWithCount: mwi = 0 | |
| D/RILJ ( 1079): [rild] [0129]> iccIO: SIM_IO 0xdc 0x6fca path: 3F007FFF,1,4,6 aid: xxx | |
| E/GSMPhone( 1079): Storing Voice Mail Count = 0 for imsi = 234207201141749 for mVmCountKey = vm_count_key vmId = vm_id_key in preferences. | |
| D/RIL-QMI ( 268): qmuxd: RX 75 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 41] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSM ( 1079): [getDisplayRule] SPN service disabled (EF_UST) | |
| D/GsmSST ( 1079): [GsmSST_0] updateSpnDisplay: radio is on but out of service, set plmn='No service' | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/GSM ( 1079): [getDisplayRule] SPN service disabled (EF_UST) | |
| I/GsmSST ( 1079): updateSpnDisplay(); mEmergencyOnly: false, isOn: true, ss.getState(): 1, mRilRegState: 2, mLuRejCause: -1, after2min:false | |
| D/GsmSST ( 1079): [GsmSST_0] ServiceState isn't in service, do not show spn | |
| D/GsmSST ( 1079): [GsmSST_0] updateSpnDisplay: changed sending intent rule=2 showPlmn='true' plmn='No service' showSpn='false' spn='null' | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RILJ ( 1079): [rild] [0129]< SIM_IO IccIoResponse xx xx | |
| D/DCT ( 1079): handleMessage msg={ what=270338 when=-60ms obj=android.os.AsyncResult@43171290 } | |
| D/DCT ( 1079): onRecordsLoaded: createAllApnList | |
| D/DCT ( 1079): createAllApnList: selection=numeric = '23420' and carrier_enabled = 1 | |
| D/DCT ( 1079): createApnList: X result=[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0] | |
| D/DCT ( 1079): getPreferredApn: mRequestedApnType=default cursor=android.content.ContentResolver$CursorWrapperInner@43188d10 cursor.count=0 | |
| D/DCT ( 1079): getPreferredApn: X not found | |
| D/DCT ( 1079): createAllApnList: mPreferredApn=null | |
| D/DCT ( 1079): createAllApnList: X mAllApnSettings=[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0] | |
| D/DCT ( 1079): onRecordsLoaded: notifying data availability | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:fota | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(fota): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:fota | |
| D/DCT ( 1079): [ApnContext:fota] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:dun | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(dun): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:dun | |
| D/DCT ( 1079): [ApnContext:dun] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:supl | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(supl): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:supl | |
| D/DCT ( 1079): [ApnContext:supl] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:hipri | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(hipri): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:hipri | |
| D/DCT ( 1079): [ApnContext:hipri] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:ims | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(ims): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:ims | |
| D/DCT ( 1079): [ApnContext:ims] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnsOfAvailability skipped apn due to isReady==true: {mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=roamingOn mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:mms | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(mms): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:mms | |
| D/DCT ( 1079): [ApnContext:mms] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:cbs | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(cbs): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:cbs | |
| D/DCT ( 1079): [ApnContext:cbs] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): setupDataOnConnectableApns: isConnectable() call trySetupData | |
| D/DCT ( 1079): trySetupData for type:default due to simLoaded apnContext={mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=simLoaded mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): trySetupData with mIsPsRestricted=false | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:fota | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(fota): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:fota | |
| D/DCT ( 1079): [ApnContext:fota] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:dun | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(dun): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:dun | |
| D/DCT ( 1079): [ApnContext:dun] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:supl | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(supl): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:supl | |
| D/DCT ( 1079): [ApnContext:supl] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:hipri | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(hipri): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:hipri | |
| D/DCT ( 1079): [ApnContext:hipri] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:ims | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(ims): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:ims | |
| D/DCT ( 1079): [ApnContext:ims] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnsOfAvailability skipped apn due to isReady==true: {mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=simLoaded mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:mms | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(mms): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:mms | |
| D/DCT ( 1079): [ApnContext:mms] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:cbs | |
| D/DCT ( 1079): isDataAllowed: not allowed due to - gprs= 1 | |
| D/DCT ( 1079): isDataPossible(cbs): possible=false isDataAllowed=false apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:cbs | |
| D/DCT ( 1079): [ApnContext:cbs] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): trySetupData: X apnContext not 'ready' retValue=false | |
| D/RIL_IccCardProxy_0( 1079): IccCardProxy handleMessage : 7 | |
| D/RIL_IccCardProxy_0( 1079): Broadcasting intent ACTION_SIM_STATE_CHANGED LOADED reason null SIM SLOT 0 | |
| D/GSMPhone( 1079): Service state changed | |
| D/GSMPhone( 1079): setEmergencyNumbers: simstateProperty=READY | |
| D/RILJ ( 1079): [rild] [0130]> SMS_ACKNOWLEDGE true 0 | |
| E/RILD ( 196): DoSmsAcknowledge: no message to ack found. | |
| D/RILJ ( 1079): [rild] [0131]> OEM_HOOK_RAW[****] | |
| D/RilRequest( 1079): [0130]< SMS_ACKNOWLEDGE error: com.android.internal.telephony.CommandException: GENERIC_FAILURE | |
| D/RIL-QMI ( 268): qmuxd: RX 64 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 30] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RilRequest( 1079): [0131]< OEM_HOOK_RAW error: com.android.internal.telephony.CommandException: NO_SUCH_ELEMENT | |
| D/RILJ ( 1079): [rild] [0132]> OEM_HOOK_RAW[****] | |
| D/RIL-QMI ( 268): qmuxd: RX 67 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 33] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RilRequest( 1079): [0132]< OEM_HOOK_RAW error: com.android.internal.telephony.CommandException: NO_SUCH_ELEMENT | |
| D/RILJ ( 1079): [rild] [0133]> OEM_HOOK_RAW[****] | |
| D/RIL-QMI ( 268): qmuxd: RX 67 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 33] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RilRequest( 1079): [0133]< OEM_HOOK_RAW error: com.android.internal.telephony.CommandException: NO_SUCH_ELEMENT | |
| D/RILJ ( 1079): [rild] [0134]> OEM_HOOK_RAW[****] | |
| E/RILD ( 196): Invalid AID | |
| D/RIL-QMI ( 268): qmuxd: RX 55 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 21] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=59 | |
| D/RilRequest( 1079): [0134]< OEM_HOOK_RAW error: com.android.internal.telephony.CommandException: NO_SUCH_ELEMENT | |
| D/SipBroadcastReceiver( 1079): onReceive: start auto registration | |
| D/GSM ( 1079): mIsVoiceMailFixed: false | |
| D/GSM ( 1079): isAvailableMBDN: true isCphsMailboxEnabled(): false | |
| D/GSM ( 1079): getVoiceMailNumber() voiceMailNum +447782333123SIMID0 | |
| E/use-Rlog/RLOG-RIL_TRACKER( 2347): swVer : M919UVUEMK2 | |
| E/use-Rlog/RLOG-RIL_TRACKER( 2347): Secril is ready | |
| E/use-Rlog/RLOG-RIL_TRACKER( 2347): intent for SECPHONE_READY | |
| I/use-Rlog/RLOG-RIL_TRACKER( 2347): onDestroy() | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=51 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=154 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=53 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=158 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=68 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=70 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=70 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=65 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=65 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| D/RILJ ( 1079): [rild] [0135]> OPERATOR | |
| D/RILJ ( 1079): [rild] [0136]> DATA_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0137]> VOICE_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0138]> QUERY_NETWORK_SELECTION_MODE | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| D/RILJ ( 1079): [rild] [0135]< OPERATOR {3 UK, 3 UK, 23420, null} | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=165 | |
| D/RILJ ( 1079): [rild] [0136]< DATA_REGISTRATION_STATE {0, 0000, 00000000, 0, null, 4} | |
| D/RILJ ( 1079): [rild] [0137]< VOICE_REGISTRATION_STATE {1, 003b, 0073e022, 3, null, null, null, null, null, null, null, null, null, null, null} | |
| D/RILJ ( 1079): [rild] [0138]< QUERY_NETWORK_SELECTION_MODE {0} | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/PHONE ( 1079): [ServiceState] setDataRegState=1 | |
| D/PHONE ( 1079): [ServiceState] setDataRadioTechnology=0 | |
| D/GsmSST ( 1079): [GsmSST_0] handlPollStateResultMessage: GsmSST setDataRegState=1 regState=0 dataRadioTechnology=0 | |
| D/PHONE ( 1079): [ServiceState] setVoiceRegState=0 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| E/PHONE ( 1079): [ServiceState] setState deprecated use setVoiceRegState() | |
| I/GsmSST ( 1079): handlePollStateResult(); regState: 1, mNewLuRejCause: -1 | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/GsmSST ( 1079): [GsmSST_0] Poll ServiceState done: oldSS=[1 1 roaming null null null Unknown:0 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] mNewSS=[0 1 home 3 UK 3 UK 23420 UMTS:3 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] oldMaxDataCalls=4 mNewMaxDataCalls=4 oldReasonDataDenied=-1 mNewReasonDataDenied=-1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/GsmSST ( 1079): [GsmSST_0] RAT switched UMTS:3 -> Unknown:0 at cell 7594018 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| D/GsmSST ( 1079): [GsmSST_0] pollStateDone: registering current mNitzUpdatedTime=false changing to false | |
| V/GsmSST ( 1079): hasChanged : true, NetworkStateChangedByRescanDialog : false, isFirstRescanDialogCheckAfterBoot : true | |
| I/GsmSST ( 1079): SelectionMode : null, isBootCompleted : true | |
| I/GsmSST ( 1079): ss.dismissRescanDialog() | |
| D/GSM ( 1079): [getDisplayRule] SPN service disabled (EF_UST) | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| I/GsmSST ( 1079): updateSpnDisplay(); mEmergencyOnly: false, isOn: true, ss.getState(): 0, mRilRegState: 1, mLuRejCause: -1, after2min:false | |
| D/GsmSST ( 1079): [GsmSST_0] updateSpnDisplay: changed sending intent rule=2 showPlmn='true' plmn='3' showSpn='false' spn='null' | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/GsmSST ( 1079): Mcc is changed : --> 234 | |
| D/GsmSST ( 1079): ZONE ID : Europe/London | |
| D/GsmSST ( 1079): TIMEZONE Update | |
| D/GsmSST ( 1079): [GsmSST_0] setAndBroadcastNetworkSetTimeZone: setTimeZone=Europe/London | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/GsmSST ( 1079): [GsmSST_0] setAndBroadcastNetworkSetTimeZone: call alarm.setTimeZone and broadcast zoneId=Europe/London | |
| D/GsmSST ( 1079): [GsmSST_0] pollStateDone: no nitz but one TZ for iso-cc=gb with zone.getID=Europe/London testOneUniqueOffsetPath=false | |
| D/GsmSST ( 1079): [GsmSST_0] setAndBroadcastNetworkSetTimeZone: setTimeZone=Europe/London | |
| D/GsmSST ( 1079): [GsmSST_0] setAndBroadcastNetworkSetTimeZone: call alarm.setTimeZone and broadcast zoneId=Europe/London | |
| D/GsmSST ( 1079): [GsmSST_0] shouldFixTimeZoneNow: retVal=true iccCardExist=true operatorNumeric=23420 mcc=234 prevOperatorNumeric= prevMcc=235 needToFixTimeZone=false ltod=12-26 23:53:07.373 | |
| D/GsmSST ( 1079): [GsmSST_0] pollStateDone: fix time zone zoneName='Europe/London' mZoneOffset=0 mZoneDst=false iso-cc='gb' iso-cc-idx=4 | |
| D/GsmSST ( 1079): [GsmSST_0] pollStateDone: using getTimeZone(off, dst, time, iso) | |
| D/GsmSST ( 1079): [GsmSST_0] pollStateDone: zone == null | |
| D/GsmSST ( 1079): [GsmSST_0] SystemProperties.get(TelephonyProperties.PROPERTY_OPERATOR_ISROAMING) truess.getRoaming() true, simslot = 0 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/GSMPhone( 1079): Service state changed | |
| D/GSMPhone( 1079): setEmergencyNumbers: simstateProperty=READY | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/GSMPhone( 1079): Service state changed | |
| D/GSMPhone( 1079): setEmergencyNumbers: simstateProperty=READY | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| E/RILD ( 196): Reader: TIMEOUT | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=154 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/RILJ ( 1079): [rild] [0139]> OPERATOR | |
| D/RILJ ( 1079): [rild] [0139]< OPERATOR {3 UK, 3 UK, 23420, null} | |
| D/RILJ ( 1079): [rild] [0140]> DATA_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0141]> VOICE_REGISTRATION_STATE | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RILJ ( 1079): [rild] [0142]> QUERY_NETWORK_SELECTION_MODE | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=165 | |
| D/RILJ ( 1079): [rild] [0140]< DATA_REGISTRATION_STATE {0, 0000, 00000000, 0, null, 4} | |
| D/PHONE ( 1079): [ServiceState] setDataRegState=1 | |
| D/PHONE ( 1079): [ServiceState] setDataRadioTechnology=0 | |
| D/GsmSST ( 1079): [GsmSST_0] handlPollStateResultMessage: GsmSST setDataRegState=1 regState=0 dataRadioTechnology=0 | |
| D/RILJ ( 1079): [rild] [0141]< VOICE_REGISTRATION_STATE {1, 003b, 0073e022, 3, null, null, null, null, null, null, null, null, null, null, null} | |
| D/PHONE ( 1079): [ServiceState] setVoiceRegState=0 | |
| E/PHONE ( 1079): [ServiceState] setState deprecated use setVoiceRegState() | |
| I/GsmSST ( 1079): handlePollStateResult(); regState: 1, mNewLuRejCause: -1 | |
| D/RILJ ( 1079): [rild] [0142]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/GsmSST ( 1079): [GsmSST_0] Poll ServiceState done: oldSS=[0 1 roaming 3 3 UK 23420 UMTS:3 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] mNewSS=[0 1 home 3 UK 3 UK 23420 UMTS:3 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] oldMaxDataCalls=4 mNewMaxDataCalls=4 oldReasonDataDenied=-1 mNewReasonDataDenied=-1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| V/GsmSST ( 1079): hasChanged : false, NetworkStateChangedByRescanDialog : false, isFirstRescanDialogCheckAfterBoot : false | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=53 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=65 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=154 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| D/RILJ ( 1079): [rild] [0143]> OPERATOR | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/RILJ ( 1079): [rild] [0144]> DATA_REGISTRATION_STATE | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/RILJ ( 1079): [rild] [0145]> VOICE_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0143]< OPERATOR {3 UK, 3 UK, 23420, null} | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0146]> QUERY_NETWORK_SELECTION_MODE | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=165 | |
| D/RILJ ( 1079): [rild] [0144]< DATA_REGISTRATION_STATE {0, 0000, 00000000, 0, null, 4} | |
| D/RILJ ( 1079): [rild] [0145]< VOICE_REGISTRATION_STATE {1, 003b, 0073e022, 3, null, null, null, null, null, null, null, null, null, null, null} | |
| D/PHONE ( 1079): [ServiceState] setDataRegState=1 | |
| D/PHONE ( 1079): [ServiceState] setDataRadioTechnology=0 | |
| D/GsmSST ( 1079): [GsmSST_0] handlPollStateResultMessage: GsmSST setDataRegState=1 regState=0 dataRadioTechnology=0 | |
| D/RILJ ( 1079): [rild] [0146]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/PHONE ( 1079): [ServiceState] setVoiceRegState=0 | |
| E/PHONE ( 1079): [ServiceState] setState deprecated use setVoiceRegState() | |
| I/GsmSST ( 1079): handlePollStateResult(); regState: 1, mNewLuRejCause: -1 | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/GsmSST ( 1079): [GsmSST_0] Poll ServiceState done: oldSS=[0 1 roaming 3 3 UK 23420 UMTS:3 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] mNewSS=[0 1 home 3 UK 3 UK 23420 UMTS:3 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] oldMaxDataCalls=4 mNewMaxDataCalls=4 oldReasonDataDenied=-1 mNewReasonDataDenied=-1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| V/GsmSST ( 1079): hasChanged : false, NetworkStateChangedByRescanDialog : false, isFirstRescanDialogCheckAfterBoot : false | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=154 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/RILJ ( 1079): [rild] [0147]> OPERATOR | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/RILJ ( 1079): [rild] [0148]> DATA_REGISTRATION_STATE | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=70 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0147]< OPERATOR {3 UK, 3 UK, 23420, null} | |
| D/RILJ ( 1079): [rild] [0149]> VOICE_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0150]> QUERY_NETWORK_SELECTION_MODE | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED | |
| D/RILJ ( 1079): [rild] [0148]< DATA_REGISTRATION_STATE {1, 003b, 0073e022, 11, null, 4} | |
| D/RILJ ( 1079): [rild] [0151]> OPERATOR | |
| D/RILJ ( 1079): [rild] [0149]< VOICE_REGISTRATION_STATE {1, 003b, 0073e022, 3, null, null, null, null, null, null, null, null, null, null, null} | |
| D/RILJ ( 1079): [rild] [0152]> DATA_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0153]> VOICE_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0150]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/RILJ ( 1079): [rild] [0154]> QUERY_NETWORK_SELECTION_MODE | |
| D/RILJ ( 1079): [rild] [0151]< OPERATOR {3 UK, 3 UK, 23420, null} | |
| D/RILJ ( 1079): [rild] [0152]< DATA_REGISTRATION_STATE {1, 003b, 0073e022, 11, null, 4} | |
| D/RILJ ( 1079): [rild] [0153]< VOICE_REGISTRATION_STATE {1, 003b, 0073e022, 3, null, null, null, null, null, null, null, null, null, null, null} | |
| D/RILJ ( 1079): [rild] [0154]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/PHONE ( 1079): [ServiceState] setDataRegState=0 | |
| D/PHONE ( 1079): [ServiceState] setDataRadioTechnology=11 | |
| D/GsmSST ( 1079): [GsmSST_0] handlPollStateResultMessage: GsmSST setDataRegState=0 regState=1 dataRadioTechnology=11 | |
| D/PHONE ( 1079): [ServiceState] setVoiceRegState=0 | |
| E/PHONE ( 1079): [ServiceState] setState deprecated use setVoiceRegState() | |
| I/GsmSST ( 1079): handlePollStateResult(); regState: 1, mNewLuRejCause: -1 | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/GsmSST ( 1079): [GsmSST_0] Poll ServiceState done: oldSS=[0 1 roaming 3 3 UK 23420 UMTS:3 Unknown:0 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] mNewSS=[0 0 home 3 UK 3 UK 23420 UMTS:3 HSPA:11 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] oldMaxDataCalls=4 mNewMaxDataCalls=4 oldReasonDataDenied=-1 mNewReasonDataDenied=-1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| D/GsmSST ( 1079): [GsmSST_0] SystemProperties.get(TelephonyProperties.PROPERTY_DATA_NETWORK_TYPE) HSPA:11ServiceState.rilRadioTechnologyToString(mSS.getRilDataRadioTechnology()) HSPA:11 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=65 | |
| V/GsmSST ( 1079): hasChanged : true, NetworkStateChangedByRescanDialog : false, isFirstRescanDialogCheckAfterBoot : false | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| I/GsmSST ( 1079): SelectionMode : null, isBootCompleted : true | |
| I/GsmSST ( 1079): ss.dismissRescanDialog() | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| I/GsmSST ( 1079): updateSpnDisplay(); mEmergencyOnly: false, isOn: true, ss.getState(): 0, mRilRegState: 1, mLuRejCause: -1, after2min:false | |
| D/GsmSST ( 1079): [GsmSST_0] pollStateDone: no nitz but one TZ for iso-cc=gb with zone.getID=Europe/London testOneUniqueOffsetPath=false | |
| D/GsmSST ( 1079): [GsmSST_0] setAndBroadcastNetworkSetTimeZone: setTimeZone=Europe/London | |
| D/GsmSST ( 1079): [GsmSST_0] setAndBroadcastNetworkSetTimeZone: call alarm.setTimeZone and broadcast zoneId=Europe/London | |
| D/GsmSST ( 1079): [GsmSST_0] shouldFixTimeZoneNow: retVal=false iccCardExist=true operatorNumeric=23420 mcc=234 prevOperatorNumeric=23420 prevMcc=234 needToFixTimeZone=false ltod=12-26 23:53:09.342 | |
| D/GsmSST ( 1079): [GsmSST_0] SystemProperties.get(TelephonyProperties.PROPERTY_OPERATOR_ISROAMING) truess.getRoaming() true, simslot = 0 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/DCT ( 1079): get all active apn types | |
| D/DCT ( 1079): isDataPossible(default): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=true apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:default | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=null | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/GSMPhone( 1079): Service state changed | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| D/GSMPhone( 1079): setEmergencyNumbers: simstateProperty=READY | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/DCT ( 1079): handleMessage msg={ what=270352 when=-16ms obj=android.os.AsyncResult@43233c10 } | |
| D/DCT ( 1079): onDataConnectionAttached | |
| D/DCT ( 1079): overall state is IDLE | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:fota | |
| D/DCT ( 1079): isDataPossible(fota): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/DCT ( 1079): get active apn string for type:fota | |
| D/DCT ( 1079): [ApnContext:fota] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:dun | |
| D/DCT ( 1079): isDataPossible(dun): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:dun | |
| D/DCT ( 1079): [ApnContext:dun] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:supl | |
| D/DCT ( 1079): isDataPossible(supl): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:supl | |
| D/DCT ( 1079): [ApnContext:supl] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:hipri | |
| D/DCT ( 1079): isDataPossible(hipri): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:hipri | |
| D/DCT ( 1079): [ApnContext:hipri] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:ims | |
| D/DCT ( 1079): isDataPossible(ims): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:ims | |
| D/DCT ( 1079): [ApnContext:ims] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnsOfAvailability skipped apn due to isReady==true: {mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=simLoaded mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:mms | |
| D/DCT ( 1079): isDataPossible(mms): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:mms | |
| D/DCT ( 1079): [ApnContext:mms] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:cbs | |
| D/DCT ( 1079): isDataPossible(cbs): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:cbs | |
| D/DCT ( 1079): [ApnContext:cbs] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): setupDataOnConnectableApns: isConnectable() call trySetupData | |
| D/DCT ( 1079): trySetupData for type:default due to dataAttached apnContext={mApnType=default mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=dataAttached mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): trySetupData with mIsPsRestricted=false | |
| D/DCT ( 1079): isEmergency: result=false | |
| D/DCT ( 1079): buildWaitingApns: E requestedApnType=default | |
| D/DCT ( 1079): getPreferredApn: mRequestedApnType=default cursor=android.content.ContentResolver$CursorWrapperInner@432401d0 cursor.count=0 | |
| D/DCT ( 1079): getPreferredApn: X not found | |
| D/DCT ( 1079): buildWaitingApns: usePreferred=true canSetPreferApn=true mPreferredApn=null operator=23420 radioTech=11 IccRecords r=mDestroyed=false mContext=com.android.phone.PhoneGlobals@42f4eec8 mCi=com.android.internal.telephony.RIL@42f5e570 mFh=Handler (com.android.internal.telephony.UsimFileHandler) {4308d218} mParentApp=com.android.internal.telephony.UiccCardApplication@4308b5a0 recordsLoadedRegistrants=android.os.RegistrantList@430906c0 mImsiReadyRegistrants=android.os.RegistrantList@430906e8 mRecordsEventsRegistrants=android.os.RegistrantList@43090710 mNewSmsRegistrants=android.os.RegistrantList@43090738 mNetworkSelectionModeAutomaticRegistrants=android.os.RegistrantList@43090760 recordsToLoad=0 adnCache=Handler (com.android.internal.telephony.AdnRecordCache) {43090ab0} recordsRequested=true iccid=8944200010261017493 msisdn=+447411145959 msisdnTag= voiceMailNum=+447782333123 voiceMailTag=Mail newVoiceMailNum=null newVoiceMailTag=null isVoiceMailFixed=false countVoiceMessages=0 mImsi=234207201141749 mncLength=2 mailboxIndex=1 mSpn=null | |
| D/DCT ( 1079): buildWaitingApns: mAllApnSettings=[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0] | |
| D/DCT ( 1079): buildWaitingApns: apn=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 | |
| D/DCT ( 1079): buildWaitingApns: adding apn=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 | |
| D/DCT ( 1079): buildWaitingApns: X apnList=[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0] | |
| D/DCT ( 1079): trySetupData: Create from mAllApnSettings : [[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0] | |
| D/DCT ( 1079): trySetupData: call setupData, waitingApns : [[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0] | |
| D/DCT ( 1079): setupData: apnContext={mApnType=default mState=IDLE mWaitingApns={[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0]} mWaitingApnsPermanentFailureCountDown=1 mApnSetting={null} mReason=dataAttached mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): checkForCompatibleConnectedApnContext: apnContext={mApnType=default mState=IDLE mWaitingApns={[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0]} mWaitingApnsPermanentFailureCountDown=1 mApnSetting={null} mReason=dataAttached mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): checkForCompatibleConnectedApnContext: not conn curApnCtx={mApnType=fota mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/DCT ( 1079): checkForCompatibleConnectedApnContext: not conn curApnCtx={mApnType=dun mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/DCT ( 1079): checkForCompatibleConnectedApnContext: not conn curApnCtx={mApnType=supl mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/DCT ( 1079): checkForCompatibleConnectedApnContext: not conn curApnCtx={mApnType=hipri mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/DCT ( 1079): checkForCompatibleConnectedApnContext: not conn curApnCtx={mApnType=ims mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/DCT ( 1079): checkForCompatibleConnectedApnContext: not conn curApnCtx={mApnType=default mState=IDLE mWaitingApns={[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0]} mWaitingApnsPermanentFailureCountDown=1 mApnSetting={null} mReason=dataAttached mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): checkForCompatibleConnectedApnContext: not conn curApnCtx={mApnType=mms mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/DCT ( 1079): checkForCompatibleConnectedApnContext: not conn curApnCtx={mApnType=cbs mState=IDLE mWaitingApns={null} mWaitingApnsPermanentFailureCountDown=0 mApnSetting={null} mReason=radioTurnedOff mDataEnabled=false mDependencyMet=true} | |
| D/DCT ( 1079): checkForCompatibleConnectedApnContext: NO conn apnContext={mApnType=default mState=IDLE mWaitingApns={[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0]} mWaitingApnsPermanentFailureCountDown=1 mApnSetting={null} mReason=dataAttached mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): checkForDuplicatedConnectedApnContext: apn=three.co.uk NO conn | |
| D/DCT ( 1079): findFreeDataConnection: NO free DataConnection | |
| D/DCT ( 1079): createDataConnection E | |
| D/DC-1 ( 1079): DataConnection constructor E | |
| D/DC-1 ( 1079): [dcRac] DcRetryAlarmController: register for intent action=com.android.internal.telephony.dataconnection.DataConnection.DC-1.action_retry | |
| D/DC-1 ( 1079): DataConnection constructor X | |
| D/DC-1 ( 1079): Made DC-1 | |
| D/DC-1 ( 1079): DcDefaultState: enter | |
| D/DC-1 ( 1079): DcInactiveState: enter() mTag=1 | |
| D/Dcc ( 1079): removeActiveDcByCid removedDc=null dc={DC-1: State=DcInactiveState mApnSetting=null RefCount=0 mCid=-1 mCreateTime=0 mLastastFailTime=0 mLastFailCause=null mTag=1 mRetryManager=RetryManager: { forever=false maxRetry=0 curMaxRetry=0 retry=0 config={null} retryArray={}} mLinkProperties={LinkAddresses: [] Routes: [] DnsAddresses: [] Domains: null} mLinkCapabilities={} mApnContexts=[]} | |
| D/DC-1 ( 1079): clearSettings | |
| D/DC-1 ( 1079): DcInactiveState nothandled msg.what=CMD_CHANNEL_FULL_CONNECTION | |
| D/DC-1 ( 1079): DcDefault msg=CMD_CHANNEL_FULL_CONNECTION RefCount=0 | |
| D/DC-1 ( 1079): DcDefaultState: FULL_CONNECTION reply connected | |
| D/DCT ( 1079): createDataConnection() X id=0 dc={DC-1: State=DcInactiveState mApnSetting=null RefCount=0 mCid=-1 mCreateTime=-1 mLastastFailTime=-1 mLastFailCause=NONE mTag=1 mRetryManager=RetryManager: { forever=false maxRetry=0 curMaxRetry=0 retry=0 config={null} retryArray={}} mLinkProperties={LinkAddresses: [] Routes: [] DnsAddresses: [] Domains: null} mLinkCapabilities={} mApnContexts=[]} | |
| D/DCT ( 1079): setupData: dcac=DC-1 apnSetting=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 | |
| D/DCT ( 1079): [ApnContext:default] setApnSetting: apnSetting=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 | |
| D/GSMPhone( 1079): getDataConnectionState() ret : CONNECTING, simSlot : 0, isOtherPhoneCalling : false, apnType : default | |
| D/DCT ( 1079): isDataPossible(default): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=true apnContextState()=CONNECTING isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:default | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 | |
| D/DCT ( 1079): setupData: initing! | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:fota | |
| D/DC-1 ( 1079): DcInactiveState: mag.what=EVENT_CONNECT | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 | |
| D/DCT ( 1079): isDataPossible(fota): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:fota | |
| D/DCT ( 1079): [ApnContext:fota] getApnSetting: apnSetting=null | |
| E/PHONE ( 1079): ServiceState.getNetworkType() DEPRECATED will be removed ******* | |
| D/DC-1 ( 1079): configureRetry: forDefault=true mRetryManager=RetryManager: { forever=true maxRetry=10 curMaxRetry=10 retry=0 config={max_retries=infinite,default_randomization=2000,5000,10000,20000,40000,80000:5000,160000:5000,320000:5000,640000:5000,1280000:5000,1800000:5000} retryArray={5000:2000 10000:2000 20000:2000 40000:2000 80000:5000 160000:5000 320000:5000 640000:5000 1280000:5000 1800000:5000 }} | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:dun | |
| D/DC-1 ( 1079): initConnection: RefCount=1 mApnList=[{mApnType=default mState=CONNECTING mWaitingApns={[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0]} mWaitingApnsPermanentFailureCountDown=1 mApnSetting={[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0} mReason=dataAttached mDataEnabled=true mDependencyMet=true}] mConnectionParams={mTag=2 mApnContext={mApnType=default mState=CONNECTING mWaitingApns={[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0]} mWaitingApnsPermanentFailureCountDown=1 mApnSetting={[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0} mReason=dataAttached mDataEnabled=true mDependencyMet=true} mInitialMaxRetry=1 mProfileId=0 mOnCompletedMsg={what=0x42000 when=-24s991ms obj={mApnType=default mState=CONNECTING mWaitingApns={[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0]} mWaitingApnsPermanentFailureCountDown=1 mApnSetting={[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0} mReason=dataAttached mDataEnabled=true mDependencyMet=true} target=Handler (com.android.internal.telephony.dataconnection.DcTracker) {42f84578} replyTo=null}} | |
| D/DC-1 ( 1079): onConnect: carrier='3' APN='three.co.uk' proxy='null' port='null' | |
| D/RILJ ( 1079): [rild] [0155]> SETUP_DATA_CALL 13 0 three.co.uk null null 0 IP | |
| D/DCT ( 1079): isDataPossible(dun): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:dun | |
| D/DCT ( 1079): [ApnContext:dun] getApnSetting: apnSetting=null | |
| E/RIL-QMI ( 196): qmi_wds_get_profile_list: profile technology sent 0 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:supl | |
| D/DCT ( 1079): isDataPossible(supl): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:supl | |
| D/DCT ( 1079): [ApnContext:supl] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:hipri | |
| D/DCT ( 1079): isDataPossible(hipri): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:hipri | |
| D/DCT ( 1079): [ApnContext:hipri] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:ims | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=73 | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): isDataPossible(ims): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:ims | |
| D/DCT ( 1079): [ApnContext:ims] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnsOfAvailability skipped apn due to isReady==true: {mApnType=default mState=CONNECTING mWaitingApns={[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0]} mWaitingApnsPermanentFailureCountDown=1 mApnSetting={[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0} mReason=dataAttached mDataEnabled=true mDependencyMet=true} | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:mms | |
| D/DCT ( 1079): isDataPossible(mms): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:mms | |
| D/DCT ( 1079): [ApnContext:mms] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): notifyOffApnOfAvailability type:cbs | |
| D/DCT ( 1079): isDataPossible(cbs): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=false apnContextState()=IDLE isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:cbs | |
| D/DCT ( 1079): [ApnContext:cbs] getApnSetting: apnSetting=null | |
| D/DCT ( 1079): trySetupData: X retValue=true | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=222 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=35 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=31 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=30 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=2f | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=2d | |
| E/RIL-QMI ( 196): qmi_wds_get_profile_list: profile technology sent 1 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=82 | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=213 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=b0 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=af | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ae | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ad | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ab | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=aa | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=a9 | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=213 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=b0 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=af | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ae | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ad | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ab | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=aa | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=a9 | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=213 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=b0 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=af | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ae | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ad | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ab | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=aa | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=a9 | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=213 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=b0 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=af | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ae | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ad | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ab | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=aa | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=a9 | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=213 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=b0 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=af | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ae | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ad | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ab | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=aa | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=a9 | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=213 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=b0 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=af | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ae | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ad | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ab | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=aa | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=a9 | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=213 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=b0 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=af | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ae | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ad | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ab | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=aa | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=a9 | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=213 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=b0 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=af | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ae | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ad | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=ab | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=aa | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=a9 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 59 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 25] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=154 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=154 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=61 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=56 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=61 | |
| D/RIL-QMI ( 268): qmuxd: RX 54 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 20] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=112 | |
| D/RILJ ( 1079): [rild] [0155]< SETUP_DATA_CALL DataCallResponse: {version=7 status=0 retry=-1 cid=1 active=2 type=IP' ifname='rmnet_usb0' addresses=[10.97.79.46] dnses=[172.31.139.17,172.30.139.17] gateways=[10.97.79.45]} | |
| E/RILD ( 196): [FD] Time Info : screenOn(5000), screenOff(5000), screenOnRel8(5000), screenOffRel8(5000) | |
| D/DC-1 ( 1079): DcActivatingState: msg={what=EVENT_SETUP_DATA_CONNECTION_DONE when=0 obj=android.os.AsyncResult@4328eb70 target=Handler (com.android.internal.util.StateMachine$SmHandler) {43253f80} replyTo=null} | |
| D/DC-1 ( 1079): onSetupConnectionCompleted received DataCallResponse: DataCallResponse: {version=7 status=0 retry=-1 cid=1 active=2 type=IP' ifname='rmnet_usb0' addresses=[10.97.79.46] dnses=[172.31.139.17,172.30.139.17] gateways=[10.97.79.45]} | |
| D/DataCallResponse( 1079): addr/pl=10.97.79.46/32 | |
| D/RILJ ( 1079): [rild] responseDataCallList ver=7 num=1 | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_DATA_CALL_LIST_CHANGED [DataCallResponse: {version=7 status=0 retry=-1 cid=1 active=2 type=IP' ifname='rmnet_usb0' addresses=[10.97.79.46] dnses=[172.31.139.17,172.30.139.17] gateways=[10.97.79.45]}] | |
| D/DCT ( 1079): handleMessage msg={ what=270340 when=0 obj=android.os.AsyncResult@432927a8 } | |
| D/DC-1 ( 1079): updateLinkProperty old LP={LinkAddresses: [] Routes: [] DnsAddresses: [] Domains: null} | |
| D/DCT ( 1079): onDataStateChanged(ar): E | |
| D/DC-1 ( 1079): updateLinkProperty new LP={InterfaceName: rmnet_usb0 LinkAddresses: [10.97.79.46/32,] Routes: [0.0.0.0/0 -> 10.97.79.45,] DnsAddresses: [172.31.139.17,172.30.139.17,] Domains: null} | |
| D/DCT ( 1079): onDataStateChanged(ar): DataCallResponse size=1 | |
| D/DC-1 ( 1079): DcActivatingState onSetupConnectionCompleted result=SUCCESS SetupResult.mFailCause=NONE dc={DC-1: State=DcActivatingState mApnSetting=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 RefCount=1 mCid=1 mCreateTime=-1 mLastastFailTime=-1 mLastFailCause=NONE mTag=2 mRetryManager=RetryManager: { forever=true maxRetry=10 curMaxRetry=10 retry=0 config={max_retries=infinite,default_randomization=2000,5000,10000,20000,40000,80000:5000,160000:5000,320000:5000,640000:5000,1280000:5000,1800000:5000} retryArray={5000:2000 10000:2000 20000:2000 40000:2000 80000:5000 160000:5000 320000:5000 640000:5000 1280000:5000 1800000:5000 }} mLinkProperties={InterfaceName: rmnet_usb0 LinkAddresses: [10.97.79.46/32,] Routes: [0.0.0.0/0 -> 10.97.79.45,] DnsAddresses: [172.31.139.17,172.30.139.17,] Domains: null} mLinkCapabilities={} mApnContexts=[{mApnType=default mState=CONNECTING mWaitingApns={[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0]} mWaitingApnsPermanentFailureCountDown=1 mApnSetting={[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0} mReason=dataAttached mDataEnabled=true mDependencyMet=true}]} | |
| D/DC-1 ( 1079): DcActiveState: enter dc={DC-1: State=DcActiveState mApnSetting=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 RefCount=1 mCid=1 mCreateTime=-1 mLastastFailTime=-1 mLastFailCause=NONE mTag=2 mRetryManager=RetryManager: { forever=true maxRetry=10 curMaxRetry=10 retry=0 config={max_retries=infinite,default_randomization=2000,5000,10000,20000,40000,80000:5000,160000:5000,320000:5000,640000:5000,1280000:5000,1800000:5000} retryArray={5000:2000 10000:2000 20000:2000 40000:2000 80000:5000 160000:5000 320000:5000 640000:5000 1280000:5000 1800000:5000 }} mLinkProperties={InterfaceName: rmnet_usb0 LinkAddresses: [10.97.79.46/32,] Routes: [0.0.0.0/0 -> 10.97.79.45,] DnsAddresses: [172.31.139.17,172.30.139.17,] Domains: null} mLinkCapabilities={} mApnContexts=[{mApnType=default mState=CONNECTING mWaitingApns={[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0]} mWaitingApnsPermanentFailureCountDown=1 mApnSetting={[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0} mReason=dataAttached mDataEnabled=true mDependencyMet=true}]} | |
| E/PHONE ( 1079): ServiceState.getNetworkType() DEPRECATED will be removed ******* | |
| D/DC-1 ( 1079): configureRetry: forDefault=true mRetryManager=RetryManager: { forever=true maxRetry=10 curMaxRetry=10 retry=0 config={max_retries=infinite,default_randomization=2000,5000,10000,20000,40000,80000:5000,160000:5000,320000:5000,640000:5000,1280000:5000,1800000:5000} retryArray={5000:2000 10000:2000 20000:2000 40000:2000 80000:5000 160000:5000 320000:5000 640000:5000 1280000:5000 1800000:5000 }} | |
| D/Dcc ( 1079): onDataStateChanged: dcsList=[DataCallResponse: {version=7 status=0 retry=-1 cid=1 active=2 type=IP' ifname='rmnet_usb0' addresses=[10.97.79.46] dnses=[172.31.139.17,172.30.139.17] gateways=[10.97.79.45]}] mDcListActiveByCid={1={DC-1: State=DcActiveState mApnSetting=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 RefCount=1 mCid=1 mCreateTime=-1 mLastastFailTime=-1 mLastFailCause=NONE mTag=2 mRetryManager=RetryManager: { forever=true maxRetry=10 curMaxRetry=10 retry=0 config={max_retries=infinite,default_randomization=2000,5000,10000,20000,40000,80000:5000,160000:5000,320000:5000,640000:5000,1280000:5000,1800000:5000} retryArray={5000:2000 10000:2000 20000:2000 40000:2000 80000:5000 160000:5000 320000:5000 640000:5000 1280000:5000 1800000:5000 }} mLinkProperties={InterfaceName: rmnet_usb0 LinkAddresses: [10.97.79.46/32,] Routes: [0.0.0.0/0 -> 10.97.79.45,] DnsAddresses: [172.31.139.17,172.30.139.17,] Domains: null} mLinkCapabilities={} mApnContexts=[{mApnType=default mState=CONNECTING mWaitingApns={[[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0]} mWaitingApnsPermanentFailureCountDown=1 mApnSetting={[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0} mReason=connected mDataEnabled=true mDependencyMet=true}]}} | |
| D/Dcc ( 1079): onDataStateChanged: dcsToRetry=[] | |
| D/Dcc ( 1079): onDataStateChanged: Found ConnId=1 newState=DataCallResponse: {version=7 status=0 retry=-1 cid=1 active=2 type=IP' ifname='rmnet_usb0' addresses=[10.97.79.46] dnses=[172.31.139.17,172.30.139.17] gateways=[10.97.79.45]} | |
| D/DataCallResponse( 1079): addr/pl=10.97.79.46/32 | |
| D/Dcc ( 1079): onDataStateChanged: no change | |
| D/Dcc ( 1079): onDataStateChanged: dcsToRetry=[] apnsToCleanup=[] | |
| D/Dcc ( 1079): onDataStateChanged: X | |
| D/DC-1 ( 1079): DcActiveState not handled msg.what=REQ_GET_CID | |
| D/DC-1 ( 1079): DcDefault msg=REQ_GET_CID RefCount=1 | |
| D/DC-1 ( 1079): REQ_GET_CID cid=1 | |
| D/DCT ( 1079): onDataStateChanged: Data Activity updated to NONE. isAnyDataCallActive = true isAnyDataCallDormant = false | |
| D/DCT ( 1079): overall state is CONNECTING | |
| D/DCT ( 1079): onDataStateChanged(ar): X | |
| D/DCT ( 1079): handleMessage msg={ what=270336 when=-13ms obj=android.os.AsyncResult@432b1018 } | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 | |
| D/DCT ( 1079): onDataSetupComplete: success apn=three.co.uk | |
| D/DCT ( 1079): onDataSetupComplete: PREFERED APN is null | |
| D/DCT ( 1079): setPreferredApn: delete | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/DCT ( 1079): setPreferredApn: insert | |
| D/RILJ ( 1079): [rild] [0156]> OEM_HOOK_RAW[09040004] | |
| D/DCT ( 1079): refresh Attach APN | |
| D/DCT ( 1079): notifyDefaultData: type=default, reason:connected | |
| D/GSMPhone( 1079): getDataConnectionState() ret : CONNECTED, simSlot : 0, isOtherPhoneCalling : false, apnType : default | |
| D/DCT ( 1079): return link properites for default | |
| D/DC-1 ( 1079): DcActiveState not handled msg.what=REQ_GET_LINK_PROPERTIES | |
| D/DC-1 ( 1079): DcDefault msg=REQ_GET_LINK_PROPERTIES RefCount=1 | |
| D/RILJ ( 1079): [rild] [0156]< OEM_HOOK_RAW [B@43... | |
| D/DC-1 ( 1079): REQ_GET_LINK_PROPERTIES linkProperties{InterfaceName: rmnet_usb0 LinkAddresses: [10.97.79.46/32,] Routes: [0.0.0.0/0 -> 10.97.79.45,] DnsAddresses: [172.31.139.17,172.30.139.17,] Domains: null} | |
| D/DCT ( 1079): get active pdp is not null, return link Capabilities for default | |
| D/DC-1 ( 1079): DcActiveState not handled msg.what=REQ_GET_LINK_CAPABILITIES | |
| D/DC-1 ( 1079): DcDefault msg=REQ_GET_LINK_CAPABILITIES RefCount=1 | |
| D/DC-1 ( 1079): REQ_GET_LINK_CAPABILITIES linkCapabilities{} | |
| D/DCT ( 1079): isDataPossible(default): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=true apnContextState()=CONNECTED isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:default | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/DCT ( 1079): overall state is CONNECTED | |
| D/DCT ( 1079): startNetStatPoll | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/DCT ( 1079): updateDataActivity: curTxRxSum={txSum=0 rxSum=0} preTxRxSum={txSum=-1 rxSum=-1} | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/DCT ( 1079): getRecoveryAction: 0 | |
| D/DCT ( 1079): overall state is CONNECTED | |
| D/DCT ( 1079): startDataStallAlarm: tag=15598 delay=60s | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=222 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=35 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=31 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=30 | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=2f | |
| E/RIL-QMI ( 196): qmi_wds_read_query_profile_tlvs: ignoring unknown TLV type=2d | |
| D/DCT ( 1079): updateDataActivity: curTxRxSum={txSum=3 rxSum=0} preTxRxSum={txSum=0 rxSum=0} | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=154 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 777 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 777 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=70 | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED | |
| D/RILJ ( 1079): [rild] [0157]> OPERATOR | |
| D/RILJ ( 1079): [rild] [0158]> DATA_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0159]> VOICE_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0157]< OPERATOR {3 UK, 3 UK, 23420, null} | |
| D/RILJ ( 1079): [rild] [0160]> QUERY_NETWORK_SELECTION_MODE | |
| D/RILJ ( 1079): [rild] [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED | |
| D/RILJ ( 1079): [rild] [0158]< DATA_REGISTRATION_STATE {1, 003b, 0073e022, 9, null, 4} | |
| D/RILJ ( 1079): [rild] [0159]< VOICE_REGISTRATION_STATE {1, 003b, 0073e022, 3, null, null, null, null, null, null, null, null, null, null, null} | |
| D/RILJ ( 1079): [rild] [0160]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/RILJ ( 1079): [rild] [0161]> OPERATOR | |
| D/RILJ ( 1079): [rild] [0162]> DATA_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0161]< OPERATOR {3 UK, 3 UK, 23420, null} | |
| D/RILJ ( 1079): [rild] [0163]> VOICE_REGISTRATION_STATE | |
| D/RILJ ( 1079): [rild] [0162]< DATA_REGISTRATION_STATE {1, 003b, 0073e022, 9, null, 4} | |
| D/RILJ ( 1079): [rild] [0164]> QUERY_NETWORK_SELECTION_MODE | |
| D/PHONE ( 1079): [ServiceState] setDataRegState=0 | |
| D/PHONE ( 1079): [ServiceState] setDataRadioTechnology=9 | |
| D/GsmSST ( 1079): [GsmSST_0] handlPollStateResultMessage: GsmSST setDataRegState=0 regState=1 dataRadioTechnology=9 | |
| D/RILJ ( 1079): [rild] [0163]< VOICE_REGISTRATION_STATE {1, 003b, 0073e022, 3, null, null, null, null, null, null, null, null, null, null, null} | |
| D/RILJ ( 1079): [rild] [0164]< QUERY_NETWORK_SELECTION_MODE {0} | |
| D/PHONE ( 1079): [ServiceState] setVoiceRegState=0 | |
| E/PHONE ( 1079): [ServiceState] setState deprecated use setVoiceRegState() | |
| I/GsmSST ( 1079): handlePollStateResult(); regState: 1, mNewLuRejCause: -1 | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/GsmSST ( 1079): [GsmSST_0] Poll ServiceState done: oldSS=[0 0 roaming 3 3 UK 23420 UMTS:3 HSPA:11 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] mNewSS=[0 0 home 3 UK 3 UK 23420 UMTS:3 HSDPA:9 CSS not supported -1 -1 RoamInd=-1 DefRoamInd=-1 EmergOnly=false] oldMaxDataCalls=4 mNewMaxDataCalls=4 oldReasonDataDenied=-1 mNewReasonDataDenied=-1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| D/PHONE ( 1079): [ServiceState] setNullState=1 | |
| D/GsmSST ( 1079): [GsmSST_0] SystemProperties.get(TelephonyProperties.PROPERTY_DATA_NETWORK_TYPE) HSDPA:9ServiceState.rilRadioTechnologyToString(mSS.getRilDataRadioTechnology()) HSDPA:9 | |
| V/GsmSST ( 1079): hasChanged : true, NetworkStateChangedByRescanDialog : false, isFirstRescanDialogCheckAfterBoot : false | |
| I/GsmSST ( 1079): SelectionMode : null, isBootCompleted : true | |
| I/GsmSST ( 1079): ss.dismissRescanDialog() | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| I/GsmSST ( 1079): updateSpnDisplay(); mEmergencyOnly: false, isOn: true, ss.getState(): 0, mRilRegState: 1, mLuRejCause: -1, after2min:false | |
| D/GsmSST ( 1079): [GsmSST_0] pollStateDone: no nitz but one TZ for iso-cc=gb with zone.getID=Europe/London testOneUniqueOffsetPath=false | |
| D/GsmSST ( 1079): [GsmSST_0] setAndBroadcastNetworkSetTimeZone: setTimeZone=Europe/London | |
| D/GsmSST ( 1079): [GsmSST_0] setAndBroadcastNetworkSetTimeZone: call alarm.setTimeZone and broadcast zoneId=Europe/London | |
| D/GsmSST ( 1079): [GsmSST_0] shouldFixTimeZoneNow: retVal=false iccCardExist=true operatorNumeric=23420 mcc=234 prevOperatorNumeric=23420 prevMcc=234 needToFixTimeZone=false ltod=12-26 23:53:13.437 | |
| D/GsmSST ( 1079): [GsmSST_0] SystemProperties.get(TelephonyProperties.PROPERTY_OPERATOR_ISROAMING) truess.getRoaming() true, simslot = 0 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 9 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/DCT ( 1079): get all active apn types | |
| D/GSMPhone( 1079): getDataConnectionState() ret : CONNECTED, simSlot : 0, isOtherPhoneCalling : false, apnType : default | |
| D/DCT ( 1079): return link properites for default | |
| D/DC-1 ( 1079): DcActiveState not handled msg.what=REQ_GET_LINK_PROPERTIES | |
| D/DC-1 ( 1079): DcDefault msg=REQ_GET_LINK_PROPERTIES RefCount=1 | |
| D/DC-1 ( 1079): REQ_GET_LINK_PROPERTIES linkProperties{InterfaceName: rmnet_usb0 LinkAddresses: [10.97.79.46/32,] Routes: [0.0.0.0/0 -> 10.97.79.45,] DnsAddresses: [172.31.139.17,172.30.139.17,] Domains: null} | |
| D/DCT ( 1079): get active pdp is not null, return link Capabilities for default | |
| D/DC-1 ( 1079): DcActiveState not handled msg.what=REQ_GET_LINK_CAPABILITIES | |
| D/DC-1 ( 1079): DcDefault msg=REQ_GET_LINK_CAPABILITIES RefCount=1 | |
| D/DC-1 ( 1079): REQ_GET_LINK_CAPABILITIES linkCapabilities{} | |
| D/DCT ( 1079): isDataPossible(default): possible=true isDataAllowed=true apnTypePossible=true apnContextisEnabled=true apnContextState()=CONNECTED isDataAllowedOnDataDisabled =false | |
| D/DCT ( 1079): get active apn string for type:default | |
| D/DCT ( 1079): [ApnContext:default] getApnSetting: apnSetting=[ApnSettingV2] 3, 183, 23420, three.co.uk, null, http://mms.um.three.co.uk:10021/mmsc, mms.three.co.uk, 8799, null, -1, default | supl | mms, IP, IP, true, 0 | |
| D/GSMPhone( 1079): Service state changed | |
| D/GSMPhone( 1079): setEmergencyNumbers: simstateProperty=READY | |
| D/TelephonyManager( 1079): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProductType='' | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): not implemented | |
| D/GsmSST ( 1079): [GsmSST_0] SST.getAllCellInfo(): X size=0 list=null | |
| D/GsmSST ( 1079): [GsmSST_0] getCellLocation(): X good mCellLoc=[59,7594018,-1] | |
| D/RIL-QMI ( 268): qmuxd: RX 65 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 31] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/DCT ( 1079): handleMessage msg={ what=270368 when=-1ms arg1=1 } | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=176 | |
| D/DCT ( 1079): handleMessage msg={ what=270368 when=-1ms arg1=1 } | |
| W/SignalStrength( 3329): Size of signalstrength parcel:176 | |
| D/DCT ( 1079): handleMessage msg={ what=270368 when=0 arg1=1 } | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo, carrier=[23420], simop=[23420] | |
| D/use-Rlog/RLOG-GSM( 1079): [SpnOverride] getMatchingSpnOverrideInfo - imsiSubset=[] | |
| I/GsmSST ( 1079): updateSpnDisplay(); mEmergencyOnly: false, isOn: true, ss.getState(): 0, mRilRegState: 1, mLuRejCause: -1, after2min:false | |
| D/DCT ( 1079): updateDataActivity: curTxRxSum={txSum=23 rxSum=19} preTxRxSum={txSum=3 rxSum=0} | |
| D/DCT ( 1079): updateDataActivity: sent=20 received=19 | |
| D/DCT ( 1079): updateDataActivity: newActivity=DATAINANDOUT | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=53 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=65 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 778 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 778 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 10 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 10 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 3329): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 10 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 10 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/DCT ( 1079): updateDataActivity: curTxRxSum={txSum=48 rxSum=46} preTxRxSum={txSum=23 rxSum=19} | |
| D/DCT ( 1079): updateDataActivity: sent=25 received=27 | |
| E/use-Rlog/RLOG-STK( 1079): onReceive android.intent.action.BOOT_COMPLETED | |
| D/DCT ( 1079): updateDataActivity: curTxRxSum={txSum=49 rxSum=46} preTxRxSum={txSum=48 rxSum=46} | |
| D/DCT ( 1079): updateDataActivity: sent=1 received=0 | |
| D/DCT ( 1079): updateDataActivity: newActivity=DATAOUT | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): updateDataActivity: curTxRxSum={txSum=68 rxSum=65} preTxRxSum={txSum=49 rxSum=46} | |
| D/DCT ( 1079): updateDataActivity: sent=19 received=19 | |
| D/DCT ( 1079): updateDataActivity: newActivity=DATAINANDOUT | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=53 | |
| D/RIL-QMI ( 268): qmuxd: RX 47 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 13] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=65 | |
| W/SignalStrength( 1079): Size of signalstrength parcel:60 | |
| W/SignalStrength( 1079): Signal before validate=SignalStrength: 779 255 -1 -1 -1 -1 -1 -1 -1 -1 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): Signal after validate=SignalStrength: 779 255 -120 -160 -120 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x0 | |
| W/SignalStrength( 1079): initialize: SignalStrength: 11 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3 | |
| W/SignalStrength( 679): Size of signalstrength parcel:172 | |
| W/SignalStrength( 924): Size of signalstrength parcel:176 | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 11 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 924): getGsmLevel=3 | |
| W/SignalStrength( 924): getLevel=3 (SignalStrength: 11 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| W/SignalStrength( 679): getGsmLevel=3 | |
| W/SignalStrength( 3329): Size of signalstrength parcel:176 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 1033): Size of signalstrength parcel:176 | |
| W/SignalStrength( 679): getLevel=3 (SignalStrength: 11 -1 -1 -1 -1 -1 -1 99 2147483647 2147483647 2147483647 -1 2147483647 gsm|lte 0x3) | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RILJ ( 1079): [rild] [0165]> GET_CELL_BROADCAST_CONFIG | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=60 | |
| D/RILC ( 196): responseCBConfig() | |
| D/RILJ ( 1079): responseCbSettings | |
| D/RILJ ( 1079): ENABLED:false, selectedId:0, msgIdCount:0, msgIdMaxCount:10 | |
| D/RILJ ( 1079): , MessageIDs: | |
| D/RILJ ( 1079): [rild] [0165]< GET_CELL_BROADCAST_CONFIG android.telephony.gsm.CbConfig@431b02f0CB ENABLED: falseselectedId0 msgIdMaxCount:10msgIdCount0 | |
| D/GSM ( 1079): [SimSmsInterfaceManager] bCBEnabled = false selectedId = 0 msgIdMaxCount = 10 msgIdCount = 0 | |
| D/GSM ( 1079): [SimSmsInterfaceManager] CB Config Out Bytes = 00000a00 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSM ( 1079): [SimSmsInterfaceManager] disableCellBroadcastRange | |
| D/GSM ( 1079): [SimSmsInterfaceManager] Calling setGsmBroadcastConfig with 1 configurations | |
| D/RILJ ( 1079): [rild] [0166]> RIL_REQUEST_GSM_SET_BROADCAST_CONFIG with 1 configs : | |
| D/RILJ ( 1079): [rild] SmsBroadcastConfigInfo: Id [0,999] Code [0,255] DISABLED | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: RX 61 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 27] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RILJ ( 1079): [rild] [0166]< RIL_REQUEST_GSM_SET_BROADCAST_CONFIG | |
| D/GSM ( 1079): [SimSmsInterfaceManager] Removed cell broadcast subscription for MID range 0 to 999 from client com.android.mms | |
| D/GSM ( 1079): [SimSmsInterfaceManager] Calling setCellBroadcastActivation(false) | |
| D/RILJ ( 1079): [rild] [0167]> RIL_REQUEST_GSM_BROADCAST_ACTIVATION | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RILJ ( 1079): [rild] [0167]< RIL_REQUEST_GSM_BROADCAST_ACTIVATION | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RILJ ( 1079): [rild] [0168]> GET_CELL_BROADCAST_CONFIG | |
| D/RIL-QMI ( 268): qmuxd: RX 51 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 17] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=65 | |
| D/RILC ( 196): responseCBConfig() | |
| D/RILJ ( 1079): responseCbSettings | |
| D/RILJ ( 1079): ENABLED:false, selectedId:0, msgIdCount:0, msgIdMaxCount:10 | |
| D/RILJ ( 1079): , MessageIDs: | |
| D/RILJ ( 1079): [rild] [0168]< GET_CELL_BROADCAST_CONFIG android.telephony.gsm.CbConfig@42fc5cf8CB ENABLED: falseselectedId0 msgIdMaxCount:10msgIdCount0 | |
| D/GSM ( 1079): [SimSmsInterfaceManager] bCBEnabled = false selectedId = 0 msgIdMaxCount = 10 msgIdCount = 0 | |
| D/GSM ( 1079): [SimSmsInterfaceManager] CB Config Out Bytes = 00000a00 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/GSM ( 1079): [SimSmsInterfaceManager] disableCellBroadcastRange | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/GSM ( 1079): [SimSmsInterfaceManager] Calling setGsmBroadcastConfig with 1 configurations | |
| D/RILJ ( 1079): [rild] [0169]> RIL_REQUEST_GSM_SET_BROADCAST_CONFIG with 1 configs : | |
| D/RILJ ( 1079): [rild] SmsBroadcastConfigInfo: Id [0,999] Code [0,255] DISABLED | |
| D/RIL-QMI ( 268): qmuxd: RX 61 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 27] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/DCT ( 1079): updateDataActivity: curTxRxSum={txSum=86 rxSum=79} preTxRxSum={txSum=68 rxSum=65} | |
| D/DCT ( 1079): updateDataActivity: sent=18 received=14 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=21, to clientID = 4, len=54 | |
| D/RILJ ( 1079): [rild] [0169]< RIL_REQUEST_GSM_SET_BROADCAST_CONFIG | |
| D/GSM ( 1079): [SimSmsInterfaceManager] Removed cell broadcast subscription for MID range 0 to 999 from client com.android.mms | |
| D/GSM ( 1079): [SimSmsInterfaceManager] Calling setCellBroadcastActivation(false) | |
| D/RILJ ( 1079): [rild] [0170]> RIL_REQUEST_GSM_BROADCAST_ACTIVATION | |
| D/RIL-QMI ( 268): qmuxd: RX 52 bytes on fd=21 from qmux_client_id=4 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 18] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=54 | |
| D/RIL-QMI ( 268): qmuxd: TX message on fd=17, to clientID = 0, len=59 | |
| D/RIL-QMI ( 268): qmuxd: RX 1100 bytes on fd=17 from qmux_client_id=0 | |
| D/RIL-QMI ( 268): [SMDPORT] >> BEFORE, Write SMD Port [fd = 10] [msg_len = 1066] | |
| D/RIL-QMI ( 268): [SMDPORT] << AFTER, Write SMD Port [rc = 0] |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Did you fixed that ?