patch -p0 < fix-vega-reset.patch

0-index.md

Support gnif's work

https://forum.level1techs.com/t/vega-10-and-12-reset-application/145666

fix-vega-reset.patch

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 44c4ae1abd00..27840129e4b0 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3433,6 +3433,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0034, quirk_no_bus_reset);
  */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset);
 
+/*
+ * Radeon RX Vega and Navi devices break on bus reset. Oi...
+ * This is *not a real workaround* - disabling bus reset
+ * for your GPU may have unintended consequences.
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x687f, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0xaaf8, quirk_no_bus_reset);
+
 static void quirk_no_pm_reset(struct pci_dev *dev)
 {
 	/*

Hi,

Is this patch still relevant? I have compiled a kernel 5.4.3 with this patch and my system even doesn't detect anymore the graphic card.

On the standard kernel 5.3.0-3 (without patch), Winows boot but i get frequently a error "pci header type '127' for device" when i try to reboot my VM.

I have to disconnect the power wire of my pc before to reboot

this isnt working for me, it keeps asking for 

[imre@localhost Desktop]$ patch -p0 < fix-vega-reset.patch
can't find file to patch at input line 5
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
|index 44c4ae1abd00..27840129e4b0 100644
|--- a/drivers/pci/quirks.c
|+++ b/drivers/pci/quirks.c
--------------------------
File to patch: 

@ImreBrassai patch -p0 != patch -p1

what

[imre@localhost ~]$ patch -p1 < vega.patch 
can't find file to patch at input line 5
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
|index 44c4ae1abd00..27840129e4b0 100644
|--- a/drivers/pci/quirks.c
|+++ b/drivers/pci/quirks.c
--------------------------
File to patch: 

You need to patch the kernel source and recompile, you don't just run the command provided...

Please stop bolding your text too, just use the insert code button.

ok sorry about that, it bolds automatically dont know why

so i did what you said, i downloaded the kernel and patched it, i installed the kernel, and when i run your script to test if it worked it gives me this

[imre@localhost linux-5.4.1]$ ~/Downloads/reset-test 0000:0a:00.0
============================================================================

AMD Vega 10/12 Reset Application (Version: 1.0)
Copyright (c) 2019 Geoffrey McRae <[email protected]>

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.

This tool is intended as an interim workaround while I port this into the
kernel driver. If you like my work and want to support it you can contribute
using the following methods:

* Ko-Fi   - https://ko-fi.com/lookingglass
* Patreon - https://www.patreon.com/gnif
* BTC     - 14ZFcYjsKPiVreHqcaekvHGL846u3ZuT13

============================================================================

Unsupported device 1002:731f

Thats a Navi GPU, not Vega. See:

https://forum.level1techs.com/t/navi-reset-kernel-patch/147547/47

OH! i see now

@gnif just wanted to thank you for your hard work, you saved my brand new threadripper build. really can't thank you enough. new patreon incoming.

has there been any progress made on an upstream fix for this?

Thanks mate.

any progress made on an upstream fix for this

Not yet, things slowed down across the holiday break, contacts have gone quiet for now ;)
In the interim work is progressing on Looking Glass :)

Which file should you patch? How do I apply the patch?

Which file should you patch? How do I apply the patch?

first you must download the source code of the linux kernel. the patch is applied in the root directory of the linux kernel source, before compiling. please google how to apply patches to the linux kernel using your distro of choice. this thread should be for information pertinent to the patch, not generic questions about the linux kernel itself.

Could this be applied with kpatch/live patching?