seilx86_panic.txt

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.1_STABLE (SEILX86_MD) #0: Wed Nov 14 10:54:07 JST 2018
        [email protected]:/disk2/home/releng/build/xb01/5.97/src/work.i386/obj/sys/arch/i386/compile/SEILX86_MD
total memory = 1957 MB
avail memory = 1860 MB
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium Pro, II or III (686-class), 1600.03 MHz, id 0x406c4
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 43d8e3bf<SSE3,PCLMULQDQ,DTES64,MONITOR,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE41,SSE42,MOVBE,POPCNT,DEADLINE,AES,RDRAND>
cpu0: features3 28100000<XD,RDTSCP,EM64T>
cpu0: "Intel(R) Celeron(R) CPU  N3160  @ 1.60GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 24 KB 64B/line 6-way
cpu0: L2 cache 1 MB 64B/line 16-way
cpu0: ITLB 48 4 KB entries fully associative
cpu0: DTLB 16 4 KB entries 4-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep disabled by BIOS
cpu0: 16 page colors
rdrand0: Intel rdrand instruction driver
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2280 (rev. 0x35)
vga1 at pci0 dev 2 function 0: Intel product 0x22b1 (rev. 0x35)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
Intel product 0x22b8 (miscellaneous multimedia, revision 0x35) at pci0 dev 3 function 0 not configured
ahcisata0 at pci0 dev 19 function 0: Intel product 0x22a3
ahcisata0: interrupting at irq 3
ahcisata0: AHCI revision 0x10301, 2 ports, 32 command slots, features 0xd734e000
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
Intel product 0x22b5 (USB serial bus, interface 0x30, revision 0x35) at pci0 dev 20 function 0 not configured
Intel product 0x2298 (miscellaneous crypto, revision 0x35) at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at irq 5
azalia0: host: 0x8086/0x2284 (rev. 53)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel product 0x22c8 (rev. 0x35)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci1 dev 0 function 0: I211 Ethernet (COPPER), rev. 3
wm0: interrupting at irq 11
wm0: Ethernet address xx:xx:xx:xx:xx:xx
ukphy0 at wm0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000ac2, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
rename wm0 to lan0
ppb1 at pci0 dev 28 function 1: Intel product 0x22ca (rev. 0x35)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci2 dev 0 function 0: I211 Ethernet (COPPER), rev. 3
wm1: interrupting at irq 10
wm1: Ethernet address xx:xx:xx:xx:xx:xx
ukphy1 at wm1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000ac2, model 0x0000, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
rename wm1 to lan1
ppb2 at pci0 dev 28 function 2: Intel product 0x22cc (rev. 0x35)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wm2 at pci3 dev 0 function 0: I210-T1 Ethernet Server Adapter, rev. 3
wm2: interrupting at irq 5
wm2: Ethernet address xx:xx:xx:xx:xx:xx
ukphy2 at wm2 phy 1: Generic IEEE 802.3u media interface
ukphy2: OUI 0x000ac2, model 0x0000, rev. 0
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
rename wm2 to lan2
ppb3 at pci0 dev 28 function 3: Intel product 0x22ce (rev. 0x35)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
wm3 at pci4 dev 0 function 0: I210-T1 Ethernet Server Adapter, rev. 3
wm3: interrupting at irq 3
wm3: Ethernet address xx:xx:xx:xx:xx:xx
ukphy3 at wm3 phy 1: Generic IEEE 802.3u media interface
ukphy3: OUI 0x000ac2, model 0x0000, rev. 0
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
rename wm3 to lan3
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x229c (rev. 0x35)
Intel product 0x2292 (SMBus serial bus, revision 0x35) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
uvm_fault(0xc393e1c0, 0, 0, 2) -> 0xe
fatal page fault in supervisor mode
trap type 6 code 2 eip c02dc1ca cs 8 eflags 10246 cr2 0 ilevel e
panic: trap
Begin traceback, show callout, ps...
trap() at netbsd:trap+0x149
--- trap (number 6) ---
evcnt_detach(c5a8c418,c5a8c400,6,c395aa00,c2be9f20) at netbsd:evcnt_detach+0x16
intr_free_io_intrsource_direct(c5a8c400,c07c8540,1,c5748000,c5c00000) at netbsd:intr_free_io_intrsource_direct+0x58
intr_establish(3,c07cb540,3,2,d) at netbsd:intr_establish+0x281
isa_intr_establish(c3944be0,3,2,d,c0235814) at netbsd:isa_intr_establish+0x21
com_isa_attach(c57dbb00,c5748000,c395ab90,c395ab90,0) at netbsd:com_isa_attach+0x7e
config_attach_loc(c57dbb00,c070ee5c,c395ab70,c395ab90,c0477c64) at netbsd:config_attach_loc+0x2a0
isasearch(c57dbb00,c070ee5c,c395ac80,0,c070ee5c) at netbsd:isasearch+0x144
mapply(c395ac20,c070ee5c,c57e208c,c3944be0,0) at netbsd:mapply+0x24
config_search_loc(c0477eb4,c57dbb00,c0684b43,c395ac80,0) at netbsd:config_search_loc+0xc2
isarescan(c57dbb00,c0684b43,c0671cd0,c071004c,1480000) at netbsd:isarescan+0x56
config_attach_loc(c5bfcac0,c071004c,0,c395ad50,c0478068) at netbsd:config_attach_loc+0x2a0
pcib_callback(c5bfcac0,0,c395ada8,c03a5265,c5819800) at netbsd:pcib_callback+0x43
config_process_deferred(c3940768,c5819800,c055c7a0,c070f63c,29) at netbsd:config_process_deferred+0x4c
config_attach_loc(c5aadf80,c070f63c,0,c395ae50,c03a8538) at netbsd:config_attach_loc+0x2af
mainbus_attach(0,c5aadf80,0,c2bcc240,0) at netbsd:mainbus_attach+0x1d0
config_attach_loc(0,c070f620,0,0,0) at netbsd:config_attach_loc+0x2a0
config_rootfound(c06843af,0,c395af58,c037609d,c0691c38) at netbsd:config_rootfound+0x2c
cpu_configure(0,c393e560,c395afa0,c02b7beb,0) at netbsd:cpu_configure+0x24
configure(0,0,0,0,0) at netbsd:configure+0x41
main(0,0,0,0,0) at netbsd:main+0x2cb
hardclock_ticks now: 0
    ticks  wheel       arg  func
        1  4/1024        0  m_cltick
     1000  4/1024 c39536a0  x86_rdrand_callout
 PID           PPID     PGRP        UID S   FLAGS LWPS          COMMAND    WAIT
>0               -1        0          0 2 0x20200    1          swapper
 PID          COMMAND     EMUL  PRI UTIME STIME WAIT-MSG    WAIT-CHANNEL
>0            swapper   netbsd    0   0.0   0.0
End traceback...

The operating system has halted.
Please press any key to reboot.