PCE mini dmesg

dmesg.log

[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.4.113 (root@1058e7ceca8f) (gcc version 4.9.3 (Buildroot 2016.05-git-gaf97a9710) ) #1 SMP PREEMPT Thu Sep 26 00:56:44 UTC 2019
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun8i
[    0.000000] cma: CMA: reserved 40 MiB at 4d800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c06c4040, node_mem_map c080a000
[    0.000000]   Normal zone: 576 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64960 pages, LIFO batch:15
[    0.000000] script_init enter!
[    0.000000] script_init exit!
[    0.000000] PERCPU: Embedded 7 pages/cpu @c0a5e000 s6592 r8192 d13888 u32768
[    0.000000] pcpu-alloc: s6592 r8192 d13888 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: boot_type=2 disp_para=100 fb_base=0x0 config_size=42480 boot.serialno=27f789046009ffffd471 boot.hardware=sun8i console=ttyS0,115200 noinitrd root=/dev/mmcblk0p7 rootfstype=ext4 rootwait init=/sbin/init ion_cma_512m=40m ion_cma_1g=176m ion_carveout_512m=96m ion_carveout_1g=150m coherent_pool=4m loglevel=0 partitions=boot-res@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:rootfs@mmcblk0p7:rootfs_data@mmcblk0p8:app@mmcblk0p9:misc@mmcblk0p10:UDISK@mmcblk0p1
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB = 256MB total
[    0.000000] Memory: 210092k/210092k available, 52052k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc062db34   (6295 kB)
[    0.000000]       .init : 0xc062e000 - 0xc065f9c0   ( 199 kB)
[    0.000000]       .data : 0xc0660000 - 0xc06c4e40   ( 404 kB)
[    0.000000]        .bss : 0xc06c6098 - 0xc08093f8   (1293 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:416
[    0.000000] try to syncboot of clk ats
[    0.000000] try to syncboot of clk sdmmc2mod
[    0.000000] try to syncboot of clk uart0
[    0.000000] try to syncboot of clk pll_ddr1
[    0.000000] try to syncboot of clk debe0
[    0.000000] try to syncboot of clk dma
[    0.000000] try to syncboot of clk sat
[    0.000000] try to syncboot of clk pio
[    0.000000] try to syncboot of clk mbus
[    0.000000] try to syncboot of clk drc0
[    0.000000] try to syncboot of clk lcd0ch0
[    0.000000] try to syncboot of clk axi
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] Console: colour dummy device 80x30
[    0.000196] Calibrating delay loop (skipped), value calculated using timer frequency.. 14405.00 BogoMIPS (lpj=24000000)
[    0.000216] pid_max: default: 4096 minimum: 301
[    0.000366] Security Framework initialized
[    0.000388] SELinux:  Initializing.
[    0.000433] SELinux:  Starting in permissive mode
[    0.000444] AppArmor: AppArmor disabled by boot time parameter
[    0.000517] Mount-cache hash table entries: 512
[    0.001255] CPU: Testing write buffer coherency: ok
[    0.001462] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001474] [sunxi_smp_prepare_cpus] enter
[    0.001507] Setting up static identity map for 0x404eb248 - 0x404eb2a0
[    0.003333] CPU1: Booted secondary processor
[    0.003333] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.003333] CPU2: Booted secondary processor
[    0.003333] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.003333] CPU3: Booted secondary processor
[    0.003333] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.043482] Brought up 4 CPUs
[    0.043482] SMP: Total of 4 processors activated (57623.00 BogoMIPS).
[    0.046920] devtmpfs: initialized
[    0.052079] pinctrl core: initialized pinctrl subsystem
[    0.052079] dummy:
[    0.054118] NET: Registered protocol family 16
[    0.062496] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.062563] script_sysfs_init success
[    0.062592] sunxi_dump_init success
[    0.062807] sunxi pinctrl probe enter
[    0.063524] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[    0.064658] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[    0.064842] axp_pinctrl_probe enter...
[    0.064991] gpiochip_add: registered GPIOs 1024 to 1029 on device: axp-pinctrl
[    0.065011] mainkey total count : 80
[    0.065020] mainkey name : product, pin count : 0
[    0.065029] mainkey name : platform, pin count : 2
[    0.065039] mainkey name : target, pin count : 0
[    0.065047] mainkey name : power_sply, pin count : 0
[    0.065056] mainkey name : key_detect_en, pin count : 0
[    0.065065] mainkey name : fel_key, pin count : 1
[    0.065074] mainkey name : gpiokey_para, pin count : 2
[    0.065084] mainkey name : card_boot, pin count : 0
[    0.065093] mainkey name : card0_boot_para, pin count : 6
[    0.065103] mainkey name : card2_boot_para, pin count : 10
[    0.065115] mainkey name : twi_para, pin count : 2
[    0.065125] mainkey name : uart_para, pin count : 2
[    0.065134] mainkey name : force_uart_para, pin count : 2
[    0.065145] mainkey name : jtag_para, pin count : 4
[    0.065154] mainkey name : clock, pin count : 0
[    0.065164] mainkey name : pm_para, pin count : 0
[    0.065174] mainkey name : dram_para, pin count : 0
[    0.065183] mainkey name : pm_para, pin count : 0
[    0.065191] mainkey name : wakeup_src_para, pin count : 1
[    0.065201] mainkey name : twi0, pin count : 2
[    0.065210] mainkey name : twi1, pin count : 2
[    0.065219] mainkey name : twi2, pin count : 2
[    0.065228] mainkey name : uart0, pin count : 2
[    0.065237] mainkey name : uart1, pin count : 4
[    0.065247] mainkey name : uart2, pin count : 2
[    0.065257] mainkey name : uart3, pin count : 4
[    0.065267] mainkey name : uart4, pin count : 4
[    0.065277] mainkey name : spi0, pin count : 4
[    0.065286] mainkey name : spi1, pin count : 4
[    0.065297] mainkey name : spi_devices, pin count : 0
[    0.065307] mainkey name : spi_board0, pin count : 0
[    0.065317] mainkey name : ctp_para, pin count : 2
[    0.065328] mainkey name : ctp_list_para, pin count : 0
[    0.065338] mainkey name : tkey_para, pin count : 0
[    0.065348] mainkey name : motor_para, pin count : 1
[    0.065360] map mainkey [motor_para] to pinctrl, map number [2]
[    0.065372] mainkey name : ths_para, pin count : 0
[    0.065381] mainkey name : cooler_table, pin count : 0
[    0.065391] mainkey name : nand0_para, pin count : 19
[    0.065402] mainkey name : hdmi_ep952_para, pin count : 2
[    0.065413] mainkey name : disp_init, pin count : 0
[    0.065423] mainkey name : lcd0_para, pin count : 29
[    0.065435] mainkey name : pwm0_para, pin count : 1
[    0.065444] mainkey name : pwm1_para, pin count : 1
[    0.065455] mainkey name : csi0, pin count : 14
[    0.065467] mainkey name : led_para, pin count : 2
[    0.065477] mainkey name : mmc0_para, pin count : 7
[    0.065487] mainkey name : mmc1_para, pin count : 6
[    0.065498] mainkey name : mmc2_para, pin count : 11
[    0.065510] mainkey name : usbc0, pin count : 3
[    0.065519] map mainkey [usbc0] to pinctrl, map number [2]
[    0.065531] mainkey name : usbc1, pin count : 0
[    0.065540] mainkey name : usb_feature, pin count : 0
[    0.065550] mainkey name : msc_feature, pin count : 0
[    0.065559] mainkey name : ma8601_para, pin count : 2
[    0.065569] mainkey name : gsensor_para, pin count : 1
[    0.065579] mainkey name : gsensor_list_para, pin count : 0
[    0.065589] mainkey name : rf_para, pin count : 0
[    0.065598] mainkey name : wifi_para, pin count : 2
[    0.065608] mainkey name : bt_para, pin count : 3
[    0.065617] mainkey name : gps_para, pin count : 2
[    0.065627] mainkey name : 3g_para, pin count : 4
[    0.065637] mainkey name : gy_para, pin count : 0
[    0.065646] mainkey name : gy_list_para, pin count : 0
[    0.065656] mainkey name : ls_para, pin count : 1
[    0.065665] mainkey name : ls_list_para, pin count : 0
[    0.065675] mainkey name : compass_para, pin count : 0
[    0.065684] mainkey name : i2s0, pin count : 3
[    0.065694] mainkey name : i2s1, pin count : 4
[    0.065704] mainkey name : audio0, pin count : 0
[    0.065713] mainkey name : pmu1_para, pin count : 0
[    0.065722] mainkey name : pmu2_para, pin count : 0
[    0.065732] mainkey name : dvfs_table, pin count : 0
[    0.065741] mainkey name : Vdevice, pin count : 2
[    0.065751] mainkey name : s_uart0, pin count : 2
[    0.065761] mainkey name : s_rsb0, pin count : 2
[    0.065771] mainkey name : s_jtag0, pin count : 4
[    0.065781] mainkey name : s_powchk, pin count : 0
[    0.065790] mainkey name : mali_para, pin count : 0
[    0.065800] mainkey name : dram_dvfs_table, pin count : 0
[    0.065809] mainkey name : charging_type, pin count : 0
[    0.065819] mainkey name : dram_scene_table, pin count : 0
[    0.065827] axp pinctrl driver probe ok
[    0.066779] sunxi_dev_init 453 gpio_buttons_data.nbuttons=2
[    0.066794] sunxi_dev_init 479 gpio_buttons[i].gpio=359 gpio_buttons[i].code=116
[    0.066807] sunxi_dev_init 479 gpio_buttons[i].gpio=356 gpio_buttons[i].code=102
[    0.067114] [sunxi-module]: [sunxi-module.0] probe success
[    0.067154] script config pll3 to 297 Mhz
[    0.067167] script config pll4 to 300 Mhz
[    0.067196] script config pll6 to 600 Mhz
[    0.067208] script config pll8 to 384 Mhz
[    0.067227] script config pll9 to 480 Mhz
[    0.067240] script config pll10 to 297 Mhz
[    0.067247] sunxi_default_clk_init
[    0.067255] try to set pll6ahb1 to 200000000
[    0.067303] try to set ahb clk source to pll6ahb1
[    0.067312] set ahb clk source to pll6ahb1
[    0.067321] try to set ahb1 to 200000000
[    0.067331] try to set apb1 to 100000000
[    0.073503] bio: create slab <bio-0> at 0
[    0.076756] [ARISC] :sunxi-arisc driver v1.60
[    0.110183] [ARISC] :arisc version: [v0.0.23.1]
[    0.110194] [sunxi-module]: arisc register success
[    0.325301] [ARISC] :sunxi-arisc driver v1.60 startup succeeded
[    0.327098] SCSI subsystem initialized
[    0.327225] usbcore: registered new interface driver usbfs
[    0.327292] usbcore: registered new interface driver hub
[    0.330037] usbcore: registered new device driver usb
[    0.330152] twi_chan_cfg()350 - [twi0] has no twi_regulator.
[    0.330167] twi_chan_cfg()350 - [twi1] has no twi_regulator.
[    0.330180] twi_chan_cfg()350 - [twi2] has no twi_regulator.
[    0.331016] Linux video capture interface: v2.00
[    0.330030] axp22_board axp22_board: AXP (CHIP ID: 0x06) detected
[    0.333724] axp22_dcdc1: 1600 <--> 3400 mV at 3000 mV
[    0.333724] axp22_dcdc2: 600 <--> 1540 mV at 1100 mV
[    0.333724] axp22_dcdc3: 600 <--> 1860 mV at 1200 mV
[    0.333724] axp22_dcdc4: 600 <--> 1540 mV at 1100 mV
[    0.333724] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV
[    0.333724] axp22_rtc: 3000 mV
[    0.333724] axp22_aldo1: 700 <--> 3300 mV at 3000 mV
[    0.333724] axp22_aldo2: 700 <--> 3300 mV at 2500 mV
[    0.333724] axp22_aldo3: 700 <--> 3300 mV at 3000 mV
[    0.333724] axp22_dldo1: 700 <--> 3300 mV at 3300 mV
[    0.333724] axp22_dldo2: 700 <--> 3300 mV at 700 mV
[    0.336821] axp22_dldo3: 700 <--> 3300 mV at 700 mV
[    0.336862] axp22_dldo4: 700 <--> 3300 mV at 700 mV
[    0.336862] axp22_eldo1: 700 <--> 3300 mV at 3000 mV
[    0.336862] axp22_eldo1: supplied by axp22_dcdc1
[    0.336910] axp22_eldo2: 700 <--> 3300 mV at 1800 mV
[    0.336910] axp22_eldo2: supplied by axp22_dcdc1
[    0.336913] axp22_eldo3: 700 <--> 3300 mV at 700 mV
[    0.336913] axp22_eldo3: supplied by axp22_dcdc1
[    0.336913] axp22_dc5ldo: 700 <--> 1400 mV at 1100 mV
[    0.336913] axp22_ldoio0: 700 <--> 3300 mV at 3800 mV
[    0.336913] axp22_ldoio1: 700 <--> 3300 mV at 3800 mV
[    0.336913] axp22_dc1sw: at 700 mV
[    0.336913] axp22_dc1sw: supplied by axp22_dcdc1
[    0.337046] input: axp22-supplyer as /devices/platform/axp22_board/axp22-supplyer.20/input/input0
[    0.340645] now_rest_vol = 0
[    0.343359] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.344402] Switching to clocksource arch_sys_counter
[    0.344717] FS-Cache: Loaded
[    0.344774] CacheFiles: Loaded
[    0.344774] [DISP]disp_module_init
[    0.344774] [DISP]disp_probe
[    0.344774] disp_init_lcd==============
[    0.344774] [DISP] OSAL_Pwm_request,line:12:    OSAL_Pwm_request pwm 1 fail!
[    0.353400] lcd_clk_config111 ======lcd ddddclk = 74250000
[    0.353411] lcd_clk_config222 ======lcd ddddclk = 74250000
[    0.353421] lcd_clk_config 111 ======lcd clk = 74250000, pll_clk = 74250000
[    0.353432] lcd_clk_config 222 ======lcd clk = 74250000, pll_clk = 74250000
[    0.353805] [DISP] OSAL_Pwm_Set_Polarity,line:95:    OSAL_Pwm_Set_Polarity, handle is NULL!
[    0.353820] [DISP] OSAL_Pwm_Config,line:78:    OSAL_Pwm_Config, handle is NULL!
[    0.353953] start_work================111
[    0.353969] [DISP]Fb_Init
[    0.354038] [DISP] parser_disp_init_para,line:130:    fetch script data disp_init.screen2_output_type fail
[    0.354055] [DISP] parser_disp_init_para,line:147:    fetch script data disp_init.screen2_output_mode fail
[    0.354080] [DISP] parser_disp_init_para,line:208:    fetch script data disp_init.fb2_format fail
[    0.354095] [DISP] parser_disp_init_para,line:213:    fetch script data disp_init.fb2_scaler_mode_enable fail
[    0.354111] [DISP] parser_disp_init_para,line:218:    fetch script data disp_init.fb2_width fail
[    0.354125] [DISP] parser_disp_init_para,line:223:    fetch script data disp_init.fb2_height fail
[    0.362764] [DISP]disp_probe finish
[    0.362841] [DISP]capture_module_init
[    0.363141] [DISP]capture_probe
[    0.363171] [DISP]capture finish
[    0.363179] [DISP]disp_module_init finish
[    0.363189] [LCD]lcd_module_init
[    0.363361] LCD_set_panel_funs: ====
[    0.363380] disp_lcd_get_driver_name, EP952
[    0.363388] gdisp.init_para.start_process
[    0.363408] start_work================111
[    0.363416] extern hdmi type...
[    0.363432] disp_lcd_get_driver_name, EP952
[    0.363439] gdisp.init_para.start_process
[    0.363454] start_work================111
[    0.363461] extern hdmi type...
[    0.363473] disp_lcd_get_driver_name, EP952
[    0.363481] gdisp.init_para.start_process
[    0.363494] start_work================111
[    0.363501] extern hdmi type...
[    0.363514] disp_lcd_get_driver_name, EP952
[    0.363521] gdisp.init_para.start_process
[    0.363535] start_work================111
[    0.363542] extern hdmi type...
[    0.363554] disp_lcd_get_driver_name, EP952
[    0.363562] gdisp.init_para.start_process
[    0.363575] start_work================111
[    0.363583] extern hdmi type...
[    0.363595] disp_lcd_get_driver_name, EP952
[    0.363603] gdisp.init_para.start_process
[    0.363616] start_work================111
[    0.363623] extern hdmi type...
[    0.363636] disp_lcd_get_driver_name, EP952
[    0.363643] gdisp.init_para.start_process
[    0.363656] start_work================111
[    0.363663] extern hdmi type...
[    0.363676] disp_lcd_get_driver_name, EP952
[    0.363685] set ep952 lcd
[    0.363691] gdisp.init_para.start_process
[    0.363705] start_work================111
[    0.363712] extern hdmi type...
[    0.363723] [LCD]lcd_module_init finish
[    0.363731] [HDMI]ep952_module_init begin
[    0.363740] hdmi used.
[    0.363750] ddc i2c id = 0
[    0.363796] ddc_i2c_detect=============
[    0.363805] [DDC_I2C] ddc_i2c_detect, get right i2c adapter, id=0
[    0.363917] ddc_i2c_detect=============
[    0.363926] [ERR]:ddc_i2c_detect err.
[    0.363936] ddc_i2c_detect=============
[    0.363942] [ERR]:ddc_i2c_detect err.
[    0.363952] hdmi i2c id = 2
[    0.363989] hdmi_i2c_detect=============
[    0.363996] err.
[    0.364004] hdmi_i2c_detect=============
[    0.364010] err.
[    0.364017] hdmi_i2c_detect=============
[    0.364024] hdmi_i2c_detect==111111===========
[    0.364033] [DISP_I2C] hdmi_i2c_detect, get right i2c adapter, id=2, i2c adapter=cd126010
[    0.364142] hdmi_i2c_probe:547
[    0.364149] hdmi_i2c_probe:575
[    0.364156] hdmi_parse_config:111
[    0.364164] hdmi_parse_config:120
[    0.364172] gpio get success!
[    0.364180] hdmi_parse_config:120
[    0.364187] gpio get success!
[    0.364194] hdmi_parse_config:136
[    0.364202] EP952 Code Version : 52.1
[    0.364210] hdmi_gpio_config:144
[    0.364217] hdmi_gpio_config: gpio_info->mul_sel = 1
[    0.376699] hdmi_gpio_config:144
[    0.376708] hdmi_gpio_config: gpio_info->mul_sel = 1
[    0.390024] hdmi_gpio_config:144
[    0.390033] hdmi_gpio_config: gpio_info->mul_sel = 7
[    0.404518] < EP952 Tx Power Down >
[    0.406962] < EP952 Audio_Mute_enable >
[    0.407575] < EP952 Video_Mute_enable >
[    0.408189] User define - Disable HDCP function
[    0.411492] gdisp.init_para.start_process
[    0.411500] ep952_thread:306
[    0.411519] start_work================111
[    0.411526] extern hdmi type...
[    0.411534] hdmi register
[    0.411540] bsp_disp_ep952_set_mode: ====
[    0.411549] ep952_set_mode: ====hdmi_mode = 5
[    0.411557] ep952_set_mode: ====g_hdmi_vic = 4
[    0.411567] disp_lcd_set_hdmi_mode...pixel_clk = 74250000drv_lcd_enable: ====
[    0.411685] disp_lcd_pre_enable: ====
[    0.411766] lcd_clk_config111 ======lcd ddddclk = 74250000
[    0.411780] lcd_clk_config222 ======lcd ddddclk = 74250000
[    0.411791] lcd_clk_config 111 ======lcd clk = 74250000, pll_clk = 74250000
[    0.411802] lcd_clk_config 222 ======lcd clk = 74250000, pll_clk = 74250000
[    0.412604] [LCD]open, step 0 finish
[    0.422153] [sunxi_hci_sunxi]: sunxi-ehci1(restrict_gpio) is invalid
[    0.422169] [sunxi_hci_sunxi]: sunxi-ehci1(drv vbus) is invalid
[    0.422182] [sunxi_hci_sunxi]: get usb_regulator is nocare
[    0.422210] [sunxi_hci_sunxi]: sunxi-ohci1(restrict_gpio) is invalid
[    0.422222] [sunxi_hci_sunxi]: sunxi-ohci1(drv vbus) is invalid
[    0.422233] [sunxi_hci_sunxi]: get usb_regulator is nocare
[    0.422418] [usb_manager]: CONFIG_USB_SUNXI_USB0_OTG
[    0.422444] get usbc0(usb_restrict pin) failed
[    0.422726] [sw_udc]: udc_init: version 20080411
[    0.423120] [ddrfreq] dram_clk value is 600
[    0.423129] [ddrfreq] sunxi_ddrfreq_max=600000
[    0.423139] [ddrfreq] dram_type value is 3
[    0.423148] [ddrfreq] dram_zq value is 0x3bbb
[    0.423156] [ddrfreq] dram_odt_en value is 1
[    0.423165] [ddrfreq] dram_para1 value is 0x10e20100
[    0.423175] [ddrfreq] dram_para2 value is 0x0
[    0.423184] [ddrfreq] dram_mr0 value is 0x1c70
[    0.423193] [ddrfreq] dram_mr1 value is 0x40
[    0.423202] [ddrfreq] dram_mr2 value is 0x18
[    0.423211] [ddrfreq] dram_mr3 value is 0x0
[    0.423220] [ddrfreq] dram_tpr0 value is 0x47a14f
[    0.423229] [ddrfreq] dram_tpr1 value is 0x1c2294c
[    0.423239] [ddrfreq] dram_tpr2 value is 0x69049
[    0.423248] [ddrfreq] dram_tpr3 value is 0x0
[    0.423256] [ddrfreq] dram_tpr4 value is 0x0
[    0.423265] [ddrfreq] dram_tpr5 value is 0x0
[    0.423274] [ddrfreq] dram_tpr6 value is 0x0
[    0.423283] [ddrfreq] dram_tpr7 value is 0x0
[    0.423292] [ddrfreq] dram_tpr8 value is 0x0
[    0.423301] [ddrfreq] dram_tpr9 value is 0x0
[    0.423309] [ddrfreq] dram_tpr10 value is 0x0
[    0.423318] [ddrfreq] dram_tpr11 value is 0x0
[    0.423327] [ddrfreq] dram_tpr12 value is 168
[    0.423360] [ddrfreq] sunxi_ddrfreq_min=168000
[    0.423370] [ddrfreq] dram_tpr13 value is 0x10901
[    0.423520] [dsm] use sysconfig
[    0.423529] [dsm] -----------Dram scene-freq Table------------
[    0.423538] [dsm] scene =    0       frequency = 600000KHz
[    0.423547] [dsm] scene =    1       frequency = 360000KHz
[    0.423555] [dsm] scene =    2       frequency = 240000KHz
[    0.423564] [dsm] scene =    3       frequency = 168000KHz
[    0.423572] [dsm] --------------------------------------------
[    0.423678] [ddrfreq] LV_count value is 3
[    0.423698] [ddrfreq] ---------------Dram V-F Table---------------
[    0.423708] [ddrfreq] voltage = 1100mv       frequency = 552000KHz
[    0.423718] [ddrfreq] voltage = 1100mv       frequency = 360000KHz
[    0.423727] [ddrfreq] voltage = 1100mv       frequency =    0KHz
[    0.423736] [ddrfreq] --------------------------------------------
[    0.423870] [ddrfreq] last_vdd=1100
[    0.423941] [ddrfreq] __sram_start: 0xc06c5000, __sram_end: 0xc06c6074, __sram_text_start: 0xf0000000, __sram_data_end: 0xf0001074
[    0.423953] [ddrfreq] sunxi dramfreq probe ok!
[    0.424256] NET: Registered protocol family 2
[    0.435751] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.436336] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.436472] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
[    0.436607] TCP: Hash tables configured (established 8192 bind 8192)
[    0.436618] TCP: reno registered
[    0.436915] NET: Registered protocol family 1
[    0.437306] RPC: Registered named UNIX socket transport module.
[    0.437316] RPC: Registered udp transport module.
[    0.437325] RPC: Registered tcp transport module.
[    0.437334] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.438073] [pm]aw_pm_init!
[    0.438085] standby_mode = 1.
[    0.438093] wakeup src cnt is : 1.
[    0.438104] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
[    0.438115] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x80
[    0.438125] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[    0.438137] sunxi_reg_init enter
[    0.438778] audit: initializing netlink socket (disabled)
[    0.438821] type=2000 audit(0.436:1): initialized
[    0.440870] NTFS driver 2.1.30 [Flags: R/W].
[    0.441055] fuse init (API version 7.18)
[    0.441458] msgmni has been set to 490
[    0.441500] SELinux:  Registering netfilter hooks
[    0.443016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.443035] io scheduler noop registered
[    0.443043] io scheduler deadline registered
[    0.443126] io scheduler cfq registered (default)
[    0.443153] pwm module init!
[    0.443750] sw_uart_get_devinfo()1428 - uart0 has no uart_regulator.
[    0.443767] sw_uart_get_devinfo()1428 - uart1 has no uart_regulator.
[    0.444148] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[    0.444169] sw_console_setup()1188 - console setup baud 115200 parity n bits 8, flow n
[    0.444450] console [ttyS0] enabled
[    0.444775] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[    0.449018] loop: module loaded
[    0.449299] [NAND]panic_buff_handle 0xce308000 ,0x4e308000
[    0.449316] [NAND][NAND]nand init start, nand0_used_flag is 0
[    0.449325] [NAND]nand_cache_level err! 0[NAND]nand_capacity_level err! 0
[    0.449338] regisger ISP =====================
[    0.449368] [NAND]nand driver is disabled
[    0.449487] get ma8601 reset gpio OK
[    0.513374] [LCD]open, step 1 finish
[    0.530062] [DISP] OSAL_Pwm_Config,line:78:    OSAL_Pwm_Config, handle is NULL!
[    0.530076] [DISP] OSAL_Pwm_Config,line:78:    OSAL_Pwm_Config, handle is NULL!
[    0.530102] [DISP] OSAL_Pwm_Config,line:78:    OSAL_Pwm_Config, handle is NULL!
[    0.573403] ma8601 init finish
[    0.573566] sunxi_spi_chan_cfg()1368 - [spi-0] has no spi_regulator.
[    0.573581] sunxi_spi_chan_cfg()1368 - [spi-1] has no spi_regulator.
[    0.573612] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.573672] [sunxi_hci_sunxi]: [sunxi-ehci1]: probe, pdev->name: sunxi-ehci, pdev->id: 1, sunxi_ehci: 0xc06fc6e4
[    0.573690] [sunxi_hci_sunxi]: [sunxi-ehci1]: open clock, is_open: 0
[    0.593719] [sunxi_hci_sunxi]: [sunxi-ehci1]: Set USB Power ON
[    0.593734] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.593772] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[    0.594376] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[    0.603367] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[    0.603380] ehci_irq: highspeed device connect
[    0.603975] usb usb1: hdev->level=0
[    0.603986] hub 1-0:1.0: USB hub found
[    0.604006] hub 1-0:1.0: 1 port detected
[    0.604374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.604441] [sunxi_hci_sunxi]: [sunxi-ohci1]: probe, pdev->name: sunxi-ohci, pdev->id: 1, sunxi_ohci: 0xc06fc7e8
[    0.604462] [sunxi_hci_sunxi]: [sunxi-ohci1]: open clock, is_open: 0
[    0.616691] [LCD]open, step 2 finish
[    0.620021] ep952_open:457
[    0.620055] ep952_open:471
[    0.620169] [LCD]open, step 3 finish
[    0.620179] ep952_thread:306
[    0.624488] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    0.624518] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
[    0.624555] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[    0.681265] usb usb2: hdev->level=0
[    0.681276] hub 2-0:1.0: USB hub found
[    0.681295] hub 2-0:1.0: 1 port detected
[    0.681658] get serial_unique failed
[    0.681849] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'android_usb'
[    0.681864] [sw_udc]: alloc request: ep(0xc06a5920, ep0, 64), req(0xcd297e40)
[    0.681883] sunxi_udc_set_selfpowered_2302: usb device is not active
[    0.681893] [sw_udc]: sunxi_udc_pullup, is_on = 0
[    0.681906] sunxi_udc_set_pullup_2319: usb device is not active
[    0.681998] file system registered
[    0.682967] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    0.682980] android_usb gadget: Number of LUNs=3
[    0.682991]  lun0: LUN: removable file: (no medium)
[    0.683001]  lun1: LUN: removable file: (no medium)
[    0.683011]  lun2: LUN: removable file: (no medium)
[    0.683327] sunxi_udc_set_selfpowered_2302: usb device is not active
[    0.683365] android_usb gadget: android_usb ready
[    0.683388] [sw_hcd0]: usb host driver initialize........
[    0.683470] [sw_hcd0]: open_usb_clock
[    0.683752] usb_regulator id vbus io is not exist
[    0.683762] [sunxi_hcd0]: host_init_state = 0
[    0.683771] [sw_hcd0]: platform is usb host
[    0.683820] [sw_hcd0]: sunxi_hcd_init_controller: sunxi_hcd_host0: USB Host mode controller at f1c19000 using PIO, IRQ 103
[    0.683842] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
[    0.683857] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
[    0.684432] usb usb3: hdev->level=0
[    0.684442] hub 3-0:1.0: USB hub found
[    0.684462] hub 3-0:1.0: 1 port detected
[    0.684813] [sw_hcd0]: sunxi_usb_host0_disable start
[    0.684826] [sw_hcd0]: sunxi_hcd_wait_for_disconnect cnt=0
[    0.684839] [sunxi_hcd_host0]: Set USB Power OFF
[    0.684944] -------sunxi_hcd0_soft_disconnect---------
[    0.684954] wrn: hcd is not enable, need not stop hcd
[    0.684964] [sunxi_hcd_host0]: Set USB Power OFF
[    0.685087] [sw_hcd0]: close_usb_clock
[    0.685114] [sw_hcd0]: sunxi_usb_host0_disable end
[    0.685445] mousedev: PS/2 mouse device common for all mice
[    0.685895] input: sunxi-keyboard as /devices/virtual/input/input1
[    0.686214] [RTC] WARNING: Rtc time will be wrong!!
[    0.686462] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[    0.686509] i2c /dev entries driver
[    0.687094] sunxi cedar version 0.1
[    0.687150] [cedar]: install start!!!
[    0.687324] [cedar]: install end!!!
[    0.691468] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[    0.691801] autohotplug_init init ok
[    0.691837] sunxi_cpufreq_initcall: clocks pll=1008000000,cpu=1008000000,axi=336000000
[    0.691852] cur: pll=1008000000, cpudiv=1, axidiv=3
[    0.691877] axp22_dcdc3: Failed to create debugfs directory
[    0.691904] sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 120MHz
[    0.691945] -------------------CPU V-F Table--------------------
[    0.691955]  frequency = 1536000KHz  voltage = 1500mv
[    0.691964]  frequency = 1344000KHz  voltage = 1460mv
[    0.691973]  frequency = 1200000KHz  voltage = 1320mv
[    0.691981]  frequency = 1008000KHz  voltage = 1200mv
[    0.691990]  frequency = 816000KHz   voltage = 1100mv
[    0.691999]  frequency = 648000KHz   voltage = 1040mv
[    0.692008]  frequency =    0KHz     voltage = 1040mv
[    0.692016]  frequency =    0KHz     voltage = 1040mv
[    0.692024] -----------------------------------------------------
[    0.692206] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.120 2016-08-3 10:59) Compiled in Sep 26 2019 at 00:56:22
[    0.692249] [mmc]: get mmc2's 2xmode ok, val = 1
[    0.692259] [mmc]: get mmc2's ddrmode ok, val = 1
[    0.692273] [mmc]: MMC host used card: 0x4, boot card: 0x4, io_card 0
[    0.693144] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.694267] [led]:sunxi_led_init begin!
[    0.694288] led1 gpio number is 39
[    0.694299] led1_trigger gpio number is none
[    0.694311] led2 gpio number is 33
[    0.694325] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.694335] led2_trigger gpio number is none
[    0.694628] Registered led device: led1
[    0.694734] Registered led device: led2
[    0.695596] usbcore: registered new interface driver usbhid
[    0.695606] usbhid: USB HID core driver
[    0.695886] axp22_dcdc1: Failed to create debugfs directory
[    0.696190] ashmem: initialized
[    0.696320] logger: created 256K log 'log_main'
[    0.696457] logger: created 256K log 'log_events'
[    0.696586] logger: created 256K log 'log_radio'
[    0.696785] logger: created 256K log 'log_system'
[    0.697043] Linux telephony interface: v1.00
[    0.697377] usbcore: registered new interface driver snd-usb-audio
[    0.701984] asoc: sndi2s0 <-> i2s0 mapping ok
[    0.703454] [ audio ] err:try to get audio_pa_ctrl failed!
[    0.703476] sunxi-pcm-codec: probe of sunxi-pcm-codec failed with error -14
[    0.704079] input: headset as /devices/virtual/input/input2
[    0.704527] [I2S1]sunxi-i2s1 cannot find any using configuration for controllers, return directly!
[    0.704748] [I2S]sndi2s1 cannot find any using configuration for controllers, return directly!
[    0.704762] I2S1 driver not init,just return.
[    0.704949] u32 classifier
[    0.704957]     Actions configured
[    0.704968] Netfilter messages via NETLINK v0.30.
[    0.705048] nf_conntrack version 0.5.0 (3922 buckets, 15688 max)
[    0.705468] ctnetlink v0.93: registering with nfnetlink.
[    0.705524] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    0.705535] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    0.705735] xt_time: kernel timezone is -0000
[    0.705912] IPv4 over IPv4 tunneling driver
[    0.706390] gre: GRE over IPv4 demultiplexor driver
[    0.706401] ip_gre: GRE over IPv4 tunneling driver
[    0.707117] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.707296] arp_tables: (C) 2002 David S. Miller
[    0.707357] TCP: cubic registered
[    0.707366] Initializing XFRM netlink socket
[    0.707695] NET: Registered protocol family 10
[    0.708873] Mobile IPv6
[    0.708911] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    0.709077] IPv6 over IPv4 tunneling driver
[    0.710064] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.710236] NET: Registered protocol family 17
[    0.710270] NET: Registered protocol family 15
[    0.710286] L2TP core driver, V2.0
[    0.710293] L2TP IP encapsulation support (L2TPv3)
[    0.710369] L2TP netlink interface
[    0.710399] L2TP ethernet pseudowire support (L2TPv3)
[    0.710919] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.710941] ThumbEE CPU extension supported.
[    0.710962] Registering SWP/SWPB emulation handler
[    0.711750] axp22_dc5ldo: incomplete constraints, leaving on
[    0.711852] axp22_eldo2: incomplete constraints, leaving on
[    0.711907] axp22_eldo1: incomplete constraints, leaving on
[    0.712096] axp22_dldo1: incomplete constraints, leaving on
[    0.712151] axp22_aldo3: incomplete constraints, leaving on
[    0.712206] axp22_aldo2: incomplete constraints, leaving on
[    0.712261] axp22_aldo1: incomplete constraints, leaving on
[    0.712359] axp22_dcdc5: incomplete constraints, leaving on
[    0.712458] axp22_dcdc3: incomplete constraints, leaving on
[    0.712513] axp22_dcdc2: incomplete constraints, leaving on
[    0.712661] otg_wakelock_init: No USB transceiver found
[    0.713254] input: gpio-keys as /devices/platform/gpio-keys.0/input/input3
[    0.713693] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
[    0.713741] ths_fetch_sysconfig_para: type err  device_used = 1.
[    0.713967] input: sunxi-ths as /devices/virtual/input/input4
[    0.714307] suxi_ths: Kernel Thermal management registered
[    0.714329] fetch C0_LV_count from sysconfig failed
[    0.714712] sunxi_ths_bind : thermal-budget-0
[    0.714724] ths_zone trip = 75, adjust lower = 0, upper = 1
[    0.714756] ths_zone trip = 90, adjust lower = 1, upper = 3
[    0.714780] CPU Budget:Register notifier
[    0.714790] CPU Budget:register Success
[    0.714801] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
[    0.718506] ALSA device list:
[    0.718521]   #0: sndi2s0
[    0.718902] Waiting for root device /dev/mmcblk0p7...
[    0.724190] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 52,  RTO !!
[    0.725048] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 52,  RTO !!
[    0.725084] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.727609] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.729538] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 8,  RTO !!
[    0.729567] *******************Try sdio*******************
[    0.730399] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 5,  RTO !!
[    0.730431] mmc0: req failed (CMD5): -110, retrying...
[    0.731261] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 5,  RTO !!
[    0.731289] mmc0: req failed (CMD5): -110, retrying...
[    0.732118] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 5,  RTO !!
[    0.732146] mmc0: req failed (CMD5): -110, retrying...
[    0.732975] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 5,  RTO !!
[    0.733003] *******************Try sd *******************
[    0.733835] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 55,  RTO !!
[    0.734686] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 55,  RTO !!
[    0.735533] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 55,  RTO !!
[    0.736381] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 55,  RTO !!
[    0.736408] *******************Try mmc*******************
[    0.736422] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.736866] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.736972] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.737077] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.739567] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.754590] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.766614] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.767079] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.767223] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    0.767321] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
[    0.767393] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
[    0.767493] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
[    0.767587] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
[    0.767720] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
[    0.767813] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    0.767886] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    0.767976] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    0.768072] mmc0: new high speed DDR MMC card at address 0001
[    0.768543] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB
[    0.768724] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
[    0.768884] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
[    0.769806]  mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
[    0.769857] mmcblk0: p1 size 1396736 extends beyond EOD, truncated
[    0.772002] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    0.772254]  mmcblk0boot1: unknown partition table
[    0.772827] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    0.773053]  mmcblk0boot0: unknown partition table
[    0.773261] *******************mmc init ok *******************
[    0.820333] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    0.834957] EXT4-fs (mmcblk0p7): recovery complete
[    0.835570] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[    0.835633] VFS: Mounted root (ext4 filesystem) on device 179:7.
[    0.835737] devtmpfs: mounted
[    0.836111] Freeing init memory: 196K
[    0.885146] EXT4-fs (mmcblk0p7): re-mounted. Opts: errors=remount-ro,data=ordered
[    0.910077] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
[    1.001725] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[    1.004277] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    1.006404] EXT4-fs (mmcblk0p9): mounted filesystem without journal. Opts: (null)
[    1.014920] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
[    1.035824] usb 1-1: hdev->level=1
[    1.035839] hub 1-1:1.0: USB hub found
[    1.036049] hub 1-1:1.0: 4 ports detected
[    1.038273] EXT4-fs (mmcblk0p7): re-mounted. Opts: errors=remount-ro,data=ordered
[    1.044814] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
[    1.118327] udevd[130]: starting version 3.1.5
[    1.295307] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.297114] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.297616] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.298101] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.298390] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.299359] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.299654] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.299938] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.303044] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.324550] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.325122] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.325441] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.360076] ====codec_init_events===
[    1.389284] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.389616] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.389900] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.390561] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.390853] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.391122] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.391393] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.391645] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.391940] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.392247] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.392501] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.392726] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.392970] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.393199] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.393479] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.393710] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.394431] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.394652] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.394867] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.395084] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.395308] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.395521] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.395732] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.395943] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.396153] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.396364] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.396577] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.396900] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.397184] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.397411] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.397628] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.397842] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.398056] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.398265] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.398477] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.398689] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.398899] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.399111] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.399322] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.452097] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[    1.470926] vmalloc: allocation failure: 0 bytes
[    1.470949] modprobe: page allocation failure: order:0, mode:0xd0
[    1.472579] Get mali parameter successfully
[    1.472621] Init Mali gpu successfully
[    1.474070] Mali: Mali device driver loaded
[    1.526754] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
[  591.886771] usb 1-1.4: new high-speed USB device number 3 using sunxi-ehci
[  592.090018] usb 1-1.4: new high-speed USB device number 4 using sunxi-ehci
[  592.313341] usb 1-1.4: new high-speed USB device number 5 using sunxi-ehci
[  592.436795] usb 1-1.4: new high-speed USB device number 6 using sunxi-ehci
[  592.476673] hub 1-1:1.0: unable to enumerate USB device on port 4
[  898.295801] [sw_udc]: sunxi_udc_pullup, is_on = 1
[  898.295832] sunxi_udc_set_pullup_2319: usb device is not active
[  915.872406] [sw_udc]: sunxi_udc_pullup, is_on = 0
[  915.872438] sunxi_udc_set_pullup_2319: usb device is not active
[  915.872449] [sw_udc]: dequeue: ep(0xc06a5908, 0), _req(0xcd297e48, 0, 0)
[  917.386895]
[  917.386906]
[  917.386909] insmod_device_driver
[  917.386913]
[  917.386925] [sw_udc]: sunxi_usb_device_enable start
[  917.386939] [sw_udc]: usb_vbase  = 0xf1c19000
[  917.386951] [sw_udc]: sram_vbase = 0xf1c00000
[  917.386976] [sw_udc]: open_usb_clock
[  917.387032] [sw_udc]: usbd_stop_work
[  917.387087] [sw_udc]: sunxi_usb_device_enable end
[  920.804770] rndis_function_bind_config MAC: 00:00:00:00:00:00
[  920.804886] android_usb gadget: using random self ethernet address
[  920.804910] android_usb gadget: using random host ethernet address
[  920.805868] rndis0: MAC 66:cf:b1:17:39:71
[  920.805883] rndis0: HOST MAC aa:af:3b:86:9a:61
[  920.805933] ep_matches, wrn: endpoint already claimed, ep(0xc06a596c, 0xcd297ec0, ep1in-bulk)
[  920.805948] ep_matches, wrn: endpoint already claimed, ep(0xc06a596c, 0xcd297ec0, ep1in-bulk)
[  920.805962] ep_matches, wrn: endpoint already claimed, ep(0xc06a59b8, 0xcd297ec0, ep1out-bulk)
[  920.805974] gadget_is_softwinner_otg is not -int
[  920.805982] gadget_is_softwinner_otg is not -int
[  920.805990] -iso
[  920.805998] [sw_udc]: alloc request: ep(0xc06a5ae8, ep4-int, 512), req(0xca5710c0)
[  920.806024] [sw_udc]: sunxi_udc_pullup, is_on = 1
[  920.806036] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED: USBC_TS_MODE_HS
[  920.806050] [sw_udc]: usbd_start_work
[  920.861508] [sw_udc]: IRQ: suspend
[  920.861529] [sw_udc]: ERR: usb speed is unkown
[  920.964830] [sw_udc]: IRQ: reset
[  920.964879] [sw_udc]: irq: reset happen, throw away all urb
[  921.012509] [sw_udc]:
[  921.012526] +++++++++++++++++++++++++++++++++++++
[  921.012533] [sw_udc]:  usb enter high speed.
[  921.012542] [sw_udc]:
[  921.012547] +++++++++++++++++++++++++++++++++++++
[  921.012690] [sw_udc]: Set address 56
[  921.071924] android_usb gadget: high-speed config #1: android
[  921.071947] [sw_udc]: ep enable: ep4(0xc06a5ae8, ep4-int, 128, 8)
[  921.071965] [sw_udc]: ep enable: ep4(0xc06a5ae8, ep4-int, 128, 8), fifo(5632, 512, 0)
[  921.071993] [sw_udc]: ep enable: ep1(0xc06a596c, ep1in-bulk, 128, 512)
[  921.072006] [sw_udc]: ep enable: ep1(0xc06a596c, ep1in-bulk, 128, 512), fifo(512, 1024, 1)
[  921.072024] [sw_udc]: ep enable: ep1(0xc06a59b8, ep1out-bulk, 0, 512)
[  921.072037] [sw_udc]: ep enable: ep1(0xc06a59b8, ep1out-bulk, 0, 512), fifo(1536, 1024, 1)
[  921.072059] [sw_udc]: alloc request: ep(0xc06a596c, ep1in-bulk, 512), req(0xcc7d4240)
[  921.072074] [sw_udc]: alloc request: ep(0xc06a596c, ep1in-bulk, 512), req(0xcc7d47c0)
[  921.072088] [sw_udc]: alloc request: ep(0xc06a596c, ep1in-bulk, 512), req(0xcc7d41c0)
[  921.072103] [sw_udc]: alloc request: ep(0xc06a596c, ep1in-bulk, 512), req(0xcc7d4940)
[  921.072117] [sw_udc]: alloc request: ep(0xc06a596c, ep1in-bulk, 512), req(0xcc773ac0)
[  921.072131] [sw_udc]: alloc request: ep(0xc06a596c, ep1in-bulk, 512), req(0xcc773b40)
[  921.072145] [sw_udc]: alloc request: ep(0xc06a596c, ep1in-bulk, 512), req(0xcc7731c0)
[  921.072159] [sw_udc]: alloc request: ep(0xc06a596c, ep1in-bulk, 512), req(0xcc7736c0)
[  921.072174] [sw_udc]: alloc request: ep(0xc06a596c, ep1in-bulk, 512), req(0xcc7734c0)
[  921.072188] [sw_udc]: alloc request: ep(0xc06a596c, ep1in-bulk, 512), req(0xcc773c40)
[  921.072203] [sw_udc]: alloc request: ep(0xc06a59b8, ep1out-bulk, 512), req(0xcc773d40)
[  921.072217] [sw_udc]: alloc request: ep(0xc06a59b8, ep1out-bulk, 512), req(0xcca1aec0)
[  921.072231] [sw_udc]: alloc request: ep(0xc06a59b8, ep1out-bulk, 512), req(0xcca1abc0)
[  921.072245] [sw_udc]: alloc request: ep(0xc06a59b8, ep1out-bulk, 512), req(0xcca1acc0)
[  921.072260] [sw_udc]: alloc request: ep(0xc06a59b8, ep1out-bulk, 512), req(0xcca1a7c0)
[  921.072274] [sw_udc]: alloc request: ep(0xc06a59b8, ep1out-bulk, 512), req(0xcca1a0c0)
[  921.072289] [sw_udc]: alloc request: ep(0xc06a59b8, ep1out-bulk, 512), req(0xcca1ad40)
[  921.072303] [sw_udc]: alloc request: ep(0xc06a59b8, ep1out-bulk, 512), req(0xcca1a840)
[  921.072318] [sw_udc]: alloc request: ep(0xc06a59b8, ep1out-bulk, 512), req(0xcca1aac0)
[  921.072332] [sw_udc]: alloc request: ep(0xc06a59b8, ep1out-bulk, 512), req(0xcc90f940)
[  921.073764] nuke: ep num is 0
[  926.077678] [sw_udc]: IRQ: suspend
[ 1185.814378] [sw_udc]: IRQ: resume
[ 1213.989919] rndis0: no IPv6 routers present
[ 1433.980753] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 1457.774983] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B