Last active
December 7, 2021 06:09
-
-
Save odysseywestra/d7cefd9e9440fb366bd1fe41e1cb4127 to your computer and use it in GitHub Desktop.
Wacom Tablet automated xsetwacom Config Script. Specificly for Wacom PTH-651
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #! /bin/bash | |
| #NOTE: I'm working on getting this to working with xinput instead of xsetwacom | |
| # due to the volidity of it. | |
| # Wacom Tablet automated xsetwacom Config Script. Specificly for Wacom PTH-651. | |
| #: | |
| #: Usage: bash ./wacom-config.sh [Options] | |
| #: | |
| #: Options: | |
| #: --help Show this message and exit. | |
| #: --display-info Show Display info. | |
| #: --tablet-info Displays tablet information. | |
| #: --set-all Sets all the parameters to default. Can be use to reset as well. | |
| #: --set-buttons Set buttons acording to configuration. | |
| #: --switch-display Switch between two displays. | |
| #: --scroll-mode Map AbsScrollWheel to 4 button modes. | |
| #: --percision-switch Switch between fullscreen, and percision mode. | |
| #: --touch-mode Enable or Disable Touch on the Tablet | |
| #: --pen-mode Switch between Releative and Absoulte Mode | |
| #: --flip-tablet Flips the Orintation of the tablet. Buttons will flip as well. | |
| #: | |
| #: Be sure to edit the top part of the script. It configures based on the info you give it. | |
| #: | |
| #: Make sure to use bash to launch script, otherwise you will get an error when | |
| #: the script tries to do the math for percision mode. | |
| #: | |
| #: Script uses a combination of both xinput and xsetwacom to change settings. | |
| #: | |
| #: Script written by Albert Westra([email protected]) | |
| #: Percision Modes of this script is based off the script by David Revoy: | |
| #: * https://gist.github.com/Deevad/51820854ffd5ea5cd883 | |
| #: License: CC-0/Public-Domain/WTFPL (http://www.wtfpl.net/) license | |
| #: | |
| # Look under your tablet for Model Number | |
| tablet_model="PTH-651" | |
| # Use "$ xsetwacom --list devices" or "$ xinput list" for it's name. | |
| tablet_name="Wacom Intuos Pro M" | |
| ## Measurements | |
| # Enter here the active area of your tablet in cm: | |
| XtabletactiveareaCM=22.5 | |
| YtabletactiveareaCM=14 | |
| ## Correction Scalling: | |
| # This setting can enlarge a bit the precision zone. I saw during test a | |
| # precision zone slightly larger has no impact on control quality, and might | |
| # feels better. | |
| # | |
| # default=1 for real precision zone, enlarge=1.5 or reduce=0.8 | |
| # | |
| # Tip: If you want the most accurate scale. Use a physical template like a | |
| # circle template to draw on the tablet then compair to the one on your | |
| # screen. If the shape on the monitor matches the shape on the template, | |
| # then bingo you got it! | |
| correctionscalefactor=1.06 | |
| # Alternative Size: | |
| #correctionscalefactor=1.5 | |
| ## Notify-send icon | |
| # Custom Icon if you want to personalize your notifcations. | |
| # NOTE: This assumes you have the Pop Icon theme installed. | |
| tablet_icon="/usr/share/icons/Pop/scalable/devices/input-tablet-symbolic.svg" | |
| ## Button Shortcuts | |
| # NOTE: You will need to set the Keybaord Shortcuts on your destkop environment with the appropiate commands for them to work. | |
| # Top three buttons | |
| button1="key +Control_L +Alt_L +Shift_L +F1 -F1" # Area Modes | |
| button2="key +Control_L +Alt_L +Shift_L +F2 -F2" # Switch Monitor | |
| button3="key +Control_L +Alt_L +Shift_L +F3 -F3" # Toggle Touch | |
| button4="key +Control_L +Alt_L +Shift_L +F4 -F4" # Toggle Relative/Absolute | |
| #Button 4 is the Scroll Wheel Mode Button | |
| button5="key +Control_L +Alt_L +Shift_L +F5 -F5" # Switch Scroll Wheel Mode | |
| # Bottom Three Buttons. | |
| button6="key +Control_L +Alt_L +Shift_L +F6 -F6" # Flip Tablet Orintation | |
| button7="key +Shift_L " # Left Shift Key | |
| button8="key +Control_L" # Left Control Key | |
| button9="key +Alt_L" # Left Alt Key | |
| ## Scroll Wheel Modes | |
| # I Have four set cause I plan on binding it to button in the center of the | |
| # scroll wheel. This button has a light which cycle in 4s. | |
| # Mode 1 | |
| scrollwheelmode1="Step Zoom Mode" | |
| scrollwheelup1="key +Shift_L +equal" | |
| scrollwheeldown1="key +minus" | |
| # Mode 2 | |
| scrollwheelmode2="Step Rotate Mode" | |
| scrollwheelup2="key +Control_L +Left" | |
| scrollwheeldown2="key +Control_L +Right" | |
| # Mode 3 | |
| scrollwheelmode3="Brush Size Mode" | |
| scrollwheelup3="key +f" | |
| scrollwheeldown3="key +d" | |
| # Mode 4 | |
| scrollwheelmode4="Layer Select Mode" | |
| scrollwheelup4="key +PgUp" | |
| scrollwheeldown4="key +PgDn" | |
| # This is specific to a dual monitor setup. Leave at default | |
| ## Primary Display | |
| # Name your display you have set as your primary monitor. | |
| # Uncomment the second one if your just using a single monitor. | |
| # | |
| primaryname="External Display" | |
| #primaryname="Primary Display" | |
| ## External/Secondary Display | |
| # | |
| secondaryname="Laptop Display" | |
| # You shouldn't need to edit anything below this line for this device. | |
| # ------------------------------------------------------------------------------ | |
| ignore="false" | |
| said="false" | |
| # Determine if Tablet is using the Wireless kit or Not. For me this is a | |
| # better method. | |
| get_tablet_info(){ | |
| if [ $(xsetwacom --list | grep -c "Wacom") = 0 ]; then | |
| tablet_notify "No Tablet Detected. Exiting" | |
| exit 1 | |
| else | |
| if [ $(xsetwacom --list | grep -c "WL") = 4 ]; then | |
| device="$tablet_name (WL)" | |
| else | |
| device="$tablet_name" | |
| fi | |
| fi | |
| tablet_full_name="$device ($tablet_model)" | |
| echo "Setup script for your $tablet_full_name" | |
| echo "-----------------------------------------" | |
| tabletstylus="$device Pen stylus" | |
| tableteraser="$device Pen eraser" | |
| tabletcursor="$device Pen cursor" | |
| tabletpad="$device Pad pad" | |
| tablettouch="$device Finger touch" | |
| echo "" | |
| echo "Tablet Information:" | |
| echo "STYLUS: $tabletstylus" | |
| echo "ERASER: $tableteraser" | |
| echo "CURSOR: $tabletcursor" | |
| echo "PAD: $tabletpad" | |
| echo "TOUCH: $tablettouch" | |
| echo "" | |
| echo "-----------------------------------------" | |
| } | |
| # Getting Display Information | |
| ## Dual-Monitor Setup | |
| # This is set up for my dual-monitor setup. This allows it to detect | |
| # when my Display port is connected and sets the default monitor to map to. | |
| get_display_info(){ | |
| #Check to see if you are using the nvidia card (Antergos Prime). | |
| #Returns a 1 or 0 | |
| echo "" | |
| echo "Gathering Display Information" | |
| echo "" | |
| nvidia=$(type -p nvidia-smi | grep -c nvidia) | |
| echo "-----------------------------------------" | |
| echo "" | |
| if [ $nvidia = 1 ]; then | |
| # Confirm Nvidia Card is there | |
| echo "Nvidia GPU is being used" | |
| else | |
| echo "Intel GPU is being used" | |
| fi | |
| echo "" | |
| echo "-----------------------------------------" | |
| #First we need to findout if you are using more than one display. | |
| if [ "$(xrandr --listmonitors | grep -w Monitors | awk '{print $2}')" -gt 1 ]; then | |
| # Set the primary display | |
| if [ $nvidia = 1 ]; then | |
| # Set it for Nvidia | |
| primary="HEAD-0" | |
| # TODO Figure out how to get screen size info from Nvidia. | |
| xrandrprimary="$(xrandr --listmonitors | grep 0: | awk '{print $4}')" | |
| primarylocation="$(xrandr --current | grep -w $xrandrprimary | uniq | awk '{print $4}' | cut -d '+' -f 2-4)" | |
| primarysize="$(xrandr --current | grep -w $xrandrprimary | uniq | awk '{print $4}' | cut -d '+' -f 1)" | |
| else | |
| # Set it for Intel | |
| # Grabs name of display through xrandr. | |
| primary="$(xrandr --listmonitors | grep 0: | awk '{print $4}')" | |
| primarylocation="$(xrandr --current | grep -w $primary | uniq | awk '{print $4}' | cut -d '+' -f 2-4)" | |
| primarysize="$(xrandr --current | grep -w $primary | uniq | awk '{print $4}' | cut -d '+' -f 1)" | |
| fi | |
| # Set the secondary display | |
| if [ $nvidia = 1 ]; then | |
| # Set for nvidia | |
| secondary="HEAD-1" | |
| # TODO Figure out how to get screen size info from Nvidia | |
| xrandrsecondary="$(xrandr --listmonitors | grep 1: | awk '{print $4}')" | |
| secondarylocation="$(xrandr --current | grep -w $xrandrsecondary | uniq | awk '{print $3}' | cut -d '+' -f 2-4)" | |
| secondarysize="$(xrandr --current | grep -w $xrandrsecondary | uniq | awk '{print $3}' | cut -d '+' -f 1)" | |
| else | |
| # Set it for Intel | |
| # Grabs name of display through xrandr. | |
| secondary="$(xrandr --listmonitors | grep 1: | awk '{print $4}')" | |
| secondarylocation="$(xrandr --current | grep -w $secondary | uniq | awk '{print $3}' | cut -d '+' -f 2-4)" | |
| secondarysize="$(xrandr --current | grep -w $secondary | uniq | awk '{print $3}' | cut -d '+' -f 1)" | |
| fi | |
| else | |
| # Set it as a single display | |
| if [ $nvidia = 1 ]; then | |
| # Set it for Nvidia | |
| primary="HEAD-0" | |
| # TODO Figure out how to get screen size info from Nvidia. | |
| xrandrprimary="$(xrandr --listmonitors | grep 0: | awk '{print $4}')" | |
| primarylocation="$(xrandr --current | grep -w $xrandrprimary | uniq | awk '{print $4}' | cut -d '+' -f 2-4)" | |
| primarysize="$(xrandr --current | grep -w $xrandrprimary | uniq | awk '{print $4}' | cut -d '+' -f 1)" | |
| else | |
| # Set it for Intel | |
| #Grabs name of display through xrandr. | |
| primary="$(xrandr --listmonitors | grep 0: | awk '{print $4}')" | |
| primarylocation="$(xrandr --current | grep -w $primary | uniq | awk '{print $4}' | cut -d '+' -f 2-4)" | |
| primarysize="$(xrandr --current | grep -w $primary | uniq | awk '{print $4}' | cut -d '+' -f 1)" | |
| fi | |
| # Set Secondary to NONE | |
| secondary="NONE" | |
| secondaryname="NONE" | |
| secondarylocation="0+0" | |
| secondarysize="0x0" | |
| secondaryname="NO NAME" | |
| echo "" | |
| echo "NO Secondary Display" | |
| echo "" | |
| echo "-----------------------------------------" | |
| fi | |
| # Show Display info for Debuggin Purposes. | |
| echo "" | |
| echo "Display Defaults" | |
| echo "Primary Display: $primary ($primaryname)" | |
| echo "Primary Display Size: $primarysize" | |
| echo "Primary Display Location: $primarylocation" | |
| echo "" | |
| echo "Secondary Display: $secondary ($secondaryname)" | |
| echo "Secondary Display Size: $secondarysize" | |
| echo "Secondary Display Location: $secondarylocation" | |
| echo "" | |
| echo "-----------------------------------------" | |
| } | |
| ## Delete tokens | |
| tablet_delete_tokens(){ | |
| echo "" | |
| echo "Removing Memory Tokens" | |
| echo "" | |
| rm -fv /tmp/wacomscript-$tablet_model* | |
| echo "" | |
| echo "-----------------------------------------" | |
| tablet_notify "Removed Memory Tokens" | |
| ignore="true" | |
| } | |
| tablet_notify(){ | |
| if [ $ignore == "false" ]; then | |
| notify-send -i "$tablet_icon" "Tablet Settings" "$1" | |
| else | |
| if [ $said == "false" ]; then | |
| notify-send -i "$tablet_icon" "Tablet Settings" "$device is ready to be used" | |
| said="true" | |
| fi | |
| fi | |
| } | |
| ## Set default Buttons | |
| tablet_set_buttons(){ | |
| echo "" | |
| if [ -f /tmp/wacomscript-$tablet_model-set_buttons-token ]; then | |
| echo "Flipping Default Buttons for $tablepad" | |
| xsetwacom set "$tabletpad" Button 13 "$button1" | |
| xsetwacom set "$tabletpad" Button 12 "$button2" | |
| xsetwacom set "$tabletpad" Button 11 "$button3" | |
| xsetwacom set "$tabletpad" Button 10 "$button4" | |
| xsetwacom set "$tabletpad" Button 1 "$button5" | |
| xsetwacom set "$tabletpad" Button 9 "$button6" | |
| xsetwacom set "$tabletpad" Button 8 "$button7" | |
| xsetwacom set "$tabletpad" Button 3 "$button8" | |
| xsetwacom set "$tabletpad" Button 2 "$button9" | |
| echo "" | |
| echo "Button 2: '$button9'" | |
| echo "Button 3: '$button8'" | |
| echo "Button 8: '$button7'" | |
| echo "Button 9: '$button6'" | |
| echo "Button 1: '$button5'" | |
| echo "Button 10: '$button4'" | |
| echo "Button 11: '$button3'" | |
| echo "Button 12: '$button2'" | |
| echo "Button 13: '$button1'" | |
| tablet_notify "Buttons are Flipped as well" | |
| rm /tmp/wacomscript-$tablet_model-set_buttons-token | |
| else | |
| echo "Setting Default Buttons for $tabletpad." | |
| # This is the ture order of the buttons on the Tablet. | |
| xsetwacom set "$tabletpad" Button 2 "$button1" | |
| xsetwacom set "$tabletpad" Button 3 "$button2" | |
| xsetwacom set "$tabletpad" Button 8 "$button3" | |
| xsetwacom set "$tabletpad" Button 9 "$button4" | |
| xsetwacom set "$tabletpad" Button 1 "$button5" | |
| xsetwacom set "$tabletpad" Button 10 "$button6" | |
| xsetwacom set "$tabletpad" Button 11 "$button7" | |
| xsetwacom set "$tabletpad" Button 12 "$button8" | |
| xsetwacom set "$tabletpad" Button 13 "$button9" | |
| echo "" | |
| echo "Button 2: '$button1'" | |
| echo "Button 3: '$button2'" | |
| echo "Button 8: '$button3'" | |
| echo "Button 9: '$button4'" | |
| echo "Button 1: '$button5'" | |
| echo "Button 10: '$button6'" | |
| echo "Button 11: '$button7'" | |
| echo "Button 12: '$button8'" | |
| echo "Button 13: '$button9'" | |
| tablet_notify "Buttons are back to normal" | |
| touch /tmp/wacomscript-$tablet_model-set_buttons-token | |
| echo "" | |
| echo "-----------------------------------------" | |
| fi | |
| } | |
| ## Tablet Display Mode | |
| tablet_display_mode(){ | |
| if [ -f /tmp/wacomscript-$tablet_model-display-token ]; then | |
| # This will map the tablet to the Secondary Display. | |
| echo "" | |
| echo "Mapped to $secondaryname" | |
| echo "" | |
| echo "-----------------------------------------" | |
| xsetwacom set "$tabletstylus" MapToOutput "$secondary" | |
| xsetwacom set "$tableteraser" MapToOutput "$secondary" | |
| xsetwacom set "$tabletcursor" MapToOutput "$secondary" | |
| #xsetwacom set "$tablettouch" MapToOutput "$secondary" | |
| tablet_notify "Mapped to $secondaryname" | |
| rm /tmp/wacomscript-$tablet_model-display-token | |
| else | |
| # This will map the tablet to the Primary Display. | |
| echo "" | |
| echo "Mapped to $primaryname" | |
| echo "" | |
| echo "-----------------------------------------" | |
| xsetwacom set "$tabletstylus" MapToOutput "$primary" | |
| xsetwacom set "$tableteraser" MapToOutput "$primary" | |
| xsetwacom set "$tabletcursor" MapToOutput "$primary" | |
| #xsetwacom set "$tablettouch" MapToOutput "$primary" | |
| tablet_notify "Mapped to $primaryname" | |
| if [ "$secondary" != "NONE" ]; then | |
| touch /tmp/wacomscript-$tablet_model-display-token | |
| else | |
| echo "" | |
| echo "NOTICE: There is only one display " | |
| echo "" | |
| echo "-----------------------------------------" | |
| tablet_notify "There is only one Display" | |
| fi | |
| fi | |
| } | |
| ## Tablet Scroll Mode | |
| tablet_scroll_mode(){ | |
| if [ -f /tmp/wacomscript-$tablet_model-scroll_mode-token-mode2 ]; then | |
| # This will put the scroll wheel in Mode 2 | |
| echo "" | |
| echo "Switching Scroll Wheel to $scrollwheelmode2" | |
| xsetwacom set "$tabletpad" AbsWheelUp "$scrollwheelup2" | |
| xsetwacom set "$tabletpad" AbsWheelDown "$scrollwheeldown2" | |
| echo "" | |
| echo "AbsWheelUp set to $scrollwheelup2" | |
| echo "AbsWheelDown set to $scrollwheeldown2" | |
| echo "" | |
| echo "-----------------------------------------" | |
| tablet_notify "Scroll Wheel set to $scrollwheelmode2" | |
| rm /tmp/wacomscript-$tablet_model-scroll_mode-token-mode2 | |
| touch /tmp/wacomscript-$tablet_model-scroll_mode-token-mode3 | |
| elif [ -f /tmp/wacomscript-$tablet_model-scroll_mode-token-mode3 ]; then | |
| # This will put the scroll wheel in Mode 3 | |
| echo "" | |
| echo "Switching Scroll Wheel to $scrollwheelmode3" | |
| xsetwacom set "$tabletpad" AbsWheelUp "$scrollwheelup3" | |
| xsetwacom set "$tabletpad" AbsWheelDown "$scrollwheeldown3" | |
| echo "" | |
| echo "AbsWheelUp set to $scrollwheelup3" | |
| echo "AbsWheelDown set to $scrollwheeldown3" | |
| echo "" | |
| echo "-----------------------------------------" | |
| tablet_notify "Scroll Wheel set to $scrollwheelmode3" | |
| rm /tmp/wacomscript-$tablet_model-scroll_mode-token-mode3 | |
| touch /tmp/wacomscript-$tablet_model-scroll_mode-token-mode4 | |
| elif [ -f /tmp/wacomscript-$tablet_model-scroll_mode-token-mode4 ]; then | |
| # This will put the scroll wheel in Mode 4 | |
| echo "" | |
| echo "Swtiching Scroll Wheel to $scrollwheelmode4" | |
| xsetwacom set "$tabletpad" AbsWheelUp "$scrollwheelup4" | |
| xsetwacom set "$tabletpad" AbsWheelDown "$scrollwheeldown4" | |
| echo "" | |
| echo "AbsWheelUp set to $scrollwheelup4" | |
| echo "AbsWheelDown set to $scrollwheeldown4" | |
| echo "" | |
| echo "-----------------------------------------" | |
| tablet_notify "Scroll Wheel set to $scrollwheelmode4" | |
| rm /tmp/wacomscript-$tablet_model-scroll_mode-token-mode4 | |
| else | |
| # This will put the scroll wheel in Mode 1 | |
| echo "Switching Scroll Wheel to $scrollwheelmode1" | |
| xsetwacom set "$tabletpad" AbsWheelUp "$scrollwheelup1" | |
| xsetwacom set "$tabletpad" AbsWheelDown "$scrollwheeldown1" | |
| echo "" | |
| echo "AbsWheelUp: $scrollwheelup1" | |
| echo "AbsWheelDown: $scrollwheeldown1" | |
| echo "" | |
| echo "-----------------------------------------" | |
| tablet_notify "Scroll Wheel set to $scrollwheelmode1" | |
| touch /tmp/wacomscript-$tablet_model-scroll_mode-token-mode2 | |
| fi | |
| } | |
| ## Tablet accurate Mode | |
| # This mode will only work on the Display selected. | |
| tablet_precision_mode(){ | |
| # Tablet | |
| xsetwacom --set "$tabletstylus" ResetArea | |
| xsetwacom --set "$tableteraser" ResetArea | |
| fulltabletarea=`xsetwacom get "$tabletstylus" Area | grep "[0-9]\+ [0-9]\+$" -o` | |
| Xtabletmaxarea=`echo $fulltabletarea | grep "^[0-9]\+" -o` | |
| Ytabletmaxarea=`echo $fulltabletarea | grep "[0-9]\+$" -o` | |
| # Screen | |
| if [ -f /tmp/wacomscript-$tablet_model-display-token ] || [ "$secondary" = "NONE" ]; then | |
| #sceenname | |
| screenname="$primaryname" | |
| #display size | |
| Xscreenpix=$(echo "$primarysize" | cut -d 'x' -f 1) | |
| Yscreenpix=$(echo "$primarysize" | cut -d 'x' -f 2) | |
| #display location | |
| Xscreenoffsetpix=$(echo "$primarylocation" | cut -d '+' -f 1) | |
| Yscreenoffsetpix=$(echo "$primarylocation" | cut -d '+' -f 2) | |
| else | |
| #screenname | |
| screenname="$secondaryname" | |
| #display size | |
| Xscreenpix=$(echo "$secondarysize" | cut -d 'x' -f 1) | |
| Yscreenpix=$(echo "$secondarysize" | cut -d 'x' -f 2) | |
| #display location | |
| Xscreenoffsetpix=$(echo "$secondarylocation" | cut -d '+' -f 1) | |
| Yscreenoffsetpix=$(echo "$secondarylocation" | cut -d '+' -f 2) | |
| fi | |
| screenPPI=$(xdpyinfo | grep dots | awk '{print $2}' | awk -Fx '{print $1}') | |
| XscreenPPI=$(bc <<< "scale = 2; $Xscreenpix / $screenPPI") | |
| YscreenPPI=$(bc <<< "scale = 2; $Yscreenpix / $screenPPI") | |
| XscreenCM=$(bc <<< "scale = 0; $Xscreenpix * 0.0254") | |
| YscreenCM=$(bc <<< "scale = 0; $Yscreenpix * 0.0254") | |
| # Precise Mode + Ratio | |
| Ytabletmaxarearatiosized=$(bc <<< "scale = 0; $Yscreenpix * $Xtabletmaxarea / $Xscreenpix") | |
| XtabletactiveareaPIX=$(bc <<< "scale = 0; $XtabletactiveareaCM * $screenPPI / 2.54 * $correctionscalefactor") | |
| YtabletactiveareaPIX=$(bc <<< "scale = 0; $YtabletactiveareaCM * $screenPPI / 2.54 * $correctionscalefactor") | |
| XtabletactiveareaPIX=$(bc <<< "scale = 0; ($XtabletactiveareaPIX + 0.5) / 1") | |
| YtabletactiveareaPIX=$(bc <<< "scale = 0; ($YtabletactiveareaPIX + 0.5) / 1") | |
| XOffsettabletactiveareaPIX=$(bc <<< "scale = 0; ($Xscreenpix - $XtabletactiveareaPIX) / 2 + $Xscreenoffsetpix") | |
| YOffsettabletactiveareaPIX=$(bc <<< "scale = 0; ($Yscreenpix - $YtabletactiveareaPIX) / 2 + $Yscreenoffsetpix") | |
| echo "" | |
| echo "Percision Mode Information:" | |
| echo "Tablet size (cm) :" "$XtabletactiveareaCM" x "$YtabletactiveareaCM" | |
| echo "Screen size (px) :" "$Xscreenpix" x "$Yscreenpix" | |
| echo "Screen size (cm) :" "$XscreenCM" x "$YscreenCM" | |
| echo "Screen ppi :" "$screenPPI" | |
| echo "Correction factor :" "$correctionscalefactor" | |
| echo "Maximum tablet-Area (Wacom unit):" "$Xtabletmaxarea" x "$Ytabletmaxarea" | |
| echo "Precision-mode area (px):" "$XtabletactiveareaPIX" x "$YtabletactiveareaPIX" | |
| echo "Precision-mode offset (px):" "$XOffsettabletactiveareaPIX" x "$YOffsettabletactiveareaPIX" | |
| echo "" | |
| echo "-----------------------------------------" | |
| if [ -f /tmp/wacomscript-$tablet_model-percision_mode-token ]; then | |
| # Here Precision mode; full tablet area in cm are 1:1 on a portion of the screen. | |
| echo "" | |
| echo "Area Precision Mode on $screenname" | |
| echo "" | |
| echo "-----------------------------------------" | |
| xsetwacom set "$tabletstylus" Area 0 0 "$Xtabletmaxarea" "$Ytabletmaxarea" | |
| xsetwacom set "$tableteraser" Area 0 0 "$Xtabletmaxarea" "$Ytabletmaxarea" | |
| xsetwacom set "$tabletstylus" MapToOutput "$XtabletactiveareaPIX"x"$YtabletactiveareaPIX"+"$XOffsettabletactiveareaPIX"+"$YOffsettabletactiveareaPIX" | |
| xsetwacom set "$tabletstylus" MapToOutput "$XtabletactiveareaPIX"x"$YtabletactiveareaPIX"+"$XOffsettabletactiveareaPIX"+"$YOffsettabletactiveareaPIX" | |
| tablet_notify "Area Percision Mode on $screenname" | |
| rm -fv /tmp/wacomscript-$tablet_model-percision_mode-token | |
| else | |
| # Here normal mode; tablet map to Fullscreen with ratio correction | |
| echo "" | |
| echo "Area Full Mode on $screenname" | |
| echo "" | |
| echo "-----------------------------------------" | |
| xsetwacom set "$tabletstylus" Area 0 0 "$Xtabletmaxarea" "$Ytabletmaxarearatiosized" | |
| xsetwacom set "$tableteraser" Area 0 0 "$Xtabletmaxarea" "$Ytabletmaxarearatiosized" | |
| xsetwacom set "$tabletstylus" MapToOutput "$Xscreenpix"x"$Yscreenpix"+"$Xscreenoffsetpix"+"$Yscreenoffsetpix" | |
| xsetwacom set "$tableteraser" MapToOutput "$Xscreenpix"x"$Yscreenpix"+"$Xscreenoffsetpix"+"$Yscreenoffsetpix" | |
| tablet_notify "Area Normal Mode on $screenname" | |
| touch /tmp/wacomscript-$tablet_model-percision_mode-token | |
| fi | |
| } | |
| ## Enable or Disable Touch | |
| # NOTE: Had to use xinput cause xsetwacom didn't have the touch listed when --list devices was called. | |
| # I did commment out the old commands so you can swtich them if that happens. | |
| tablet_touch_mode(){ | |
| if [ -f /tmp/wacomscript-$tablet_model-touch_mode-token ]; then | |
| echo "" | |
| echo "Disabling Touch on $tablettouch" | |
| echo "" | |
| echo "-----------------------------------------" | |
| xinput disable "$tablettouch" | |
| #xsetwacom set "$tablettouch" Touch "off" | |
| tablet_notify "Touch Diasbled" | |
| rm /tmp/wacomscript-$tablet_model-touch_mode-token | |
| else | |
| echo "" | |
| echo "Enabling Touch on $tablettouch" | |
| echo "" | |
| echo "-----------------------------------------" | |
| xinput enable "$tablettouch" | |
| #xsetwacom set "$tablettouch" Touch "on" | |
| tablet_notify "Touch Enabled" | |
| touch /tmp/wacomscript-$tablet_model-touch_mode-token | |
| fi | |
| } | |
| tablet_pen_mode(){ | |
| if [ -f /tmp/wacomscript-$tablet_model-pen_mode-token ]; then | |
| echo "" | |
| echo "Switching to Relative Mode for $tablet_full_name" | |
| echo "" | |
| echo "-----------------------------------------" | |
| xsetwacom set "$tabletstylus" Mode "Relative" | |
| tablet_notify "Mode Relative" | |
| rm /tmp/wacomscript-$tablet_model-pen_mode-token | |
| else | |
| echo "" | |
| echo "Switching to Absolute Mode for $tablet_full_name" | |
| echo "" | |
| echo "-----------------------------------------" | |
| xsetwacom set "$tabletstylus" Mode "Absolute" | |
| tablet_notify "Mode Absolute" | |
| touch /tmp/wacomscript-$tablet_model-pen_mode-token | |
| fi | |
| } | |
| tablet_flip_mode(){ | |
| if [ -f /tmp/wacomscript-$tablet_model-flip_mode-token ]; then | |
| echo "" | |
| echo "Flipping tablet to half on $tablet_full_name" | |
| echo "" | |
| echo "-----------------------------------------" | |
| xsetwacom set "$tabletstylus" Rotate "half" | |
| tablet_notify "Rotating Tablet Upsidedown" | |
| rm /tmp/wacomscript-$tablet_model-flip_mode-token | |
| else | |
| echo "" | |
| echo "Flipping tablet to normal mode on $tablet_full_name" | |
| echo "" | |
| echo "-----------------------------------------" | |
| xsetwacom set "$tabletstylus" Rotate "none" | |
| tablet_notify "Rotating Tablet Normal" | |
| touch /tmp/wacomscript-$tablet_model-flip_mode-token | |
| fi | |
| } | |
| ## Commandline Processing | |
| case "$1" in | |
| --help) | |
| grep '^#:' $0 | cut -d ':' -f 2-50 | |
| exit 0 | |
| ;; | |
| --display-info) | |
| get_display_info | |
| ;; | |
| --tablet-info) | |
| get_tablet_info | |
| ;; | |
| --set-all) | |
| get_tablet_info | |
| tablet_delete_tokens | |
| get_display_info | |
| tablet_set_buttons | |
| tablet_display_mode | |
| tablet_scroll_mode | |
| tablet_precision_mode | |
| tablet_touch_mode | |
| tablet_pen_mode | |
| tablet_flip_mode | |
| ;; | |
| --set-buttons) | |
| get_tablet_info | |
| tablet_set_buttons | |
| ;; | |
| --switch-display) | |
| get_tablet_info | |
| get_display_info | |
| tablet_display_mode | |
| ;; | |
| --scroll-mode) | |
| get_tablet_info | |
| tablet_scroll_mode | |
| ;; | |
| --percision-switch) | |
| get_tablet_info | |
| get_display_info | |
| tablet_precision_mode | |
| ;; | |
| --touch-mode) | |
| get_tablet_info | |
| tablet_touch_mode | |
| ;; | |
| --pen-mode) | |
| get_tablet_info | |
| tablet_pen_mode | |
| ;; | |
| --flip-tablet) | |
| get_tablet_info | |
| tablet_flip_mode | |
| tablet_set_buttons | |
| ;; | |
| *) | |
| grep '^#:' $0 | cut -d ':' -f 2-50 | |
| exit 0 | |
| ;; | |
| esac |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment