Skip to content

Instantly share code, notes, and snippets.

@orimanabu

orimanabu/bhyve log (FreeBSD 10.0 host on FreeBSD 9.2 guest)

Created April 2, 2014 11:22
Show Gist options
  • Save orimanabu/9932257 to your computer and use it in GitHub Desktop.
Save orimanabu/9932257 to your computer and use it in GitHub Desktop.
Download ZIP
bhyve log (FreeBSD 10.0 host on FreeBSD 9.2 guest)
Raw
bhyve log (FreeBSD 10.0 host on FreeBSD 9.2 guest)
ori@freebsd-master:~/work/bhyve-script % sudo sh freebsd1 start
Password:
vmm.ko is loaded.
Entering vmload()
vmload: Attaching raw image ./vm/freebsd1/freebsd1.img for fsck
vmload: DEBUG: VMIMG is ./vm/freebsd1/freebsd1.img and VMDEV is md0
Entering getvolpart()
vmload: DEBUG: fsck_ufs -y /dev/md0p2
** /dev/md0p2
USE JOURNAL? yes
** SU+J Recovering /dev/md0p2
** Reading 15925248 byte journal from inode 4.
RECOVER? yes
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
WRITE CHANGES? yes
** 15 journal records in 2048 bytes for 23.44% utilization
** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags.
***** FILE SYSTEM MARKED CLEAN *****
Entering mddestroy()
mddestroy: Destroying all memory devices associated with freebsd1
mddestroy: Destroying mdconfig device: md0
vmload: DEBUG: mdconfig -lv | grep -o md0 (gone?)
vmload: Running the bhyveload command:
bhyveload -m 1024 -d ./vm/freebsd1/freebsd1.img freebsd1
Consoles: userboot
FreeBSD/amd64 User boot, Revision 1.1
([email protected], Thu Jan 16 22:18:02 UTC 2014)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0xe30120 data=0x15ea00+0x112168 syms=[0x8+0x162270+0x8+0x1b64b7]
\
______ ____ _____ _____
| ____| | _ \ / ____| __ \
| |___ _ __ ___ ___ | |_) | (___ | | | |
| ___| '__/ _ \/ _ \| _ < \___ \| | | |
| | | | | __/ __/| |_) |____) | |__| |
| | | | | | || | | |
|_| |_| \___|\___||____/|_____/|_____/ ``` `
s` `.....---.......--.``` -/
+------------Welcome to FreeBSD-----------+ +o .--` /y:` +.
| | yo`:. :o `+-
| 1. Boot Multi User [Enter] | y/ -/` -o/
| 2. Boot [S]ingle User | .- ::/sy+:.
| 3. [Esc]ape to loader prompt | / `-- /
| 4. Reboot | `: :`
| | `: :`
| Options: | / /
| 5. Configure Boot [O]ptions... | .- -.
| | -- -.
| | `:` `:`
| | .-- `--.
| | .---.....----.
+-----------------------------------------+
FreeBSD `Nakatomi Socrates' 9.2
Booting...
vmload: freebsd1 appears to have loaded.
Entering vmboot()
vmboot: Starting Networking. "File Exists" warnings are okay.
ifconfig: interface tap1 does not exist
ifconfig: interface tap1 does not exist
ifconfig: BRDGADD em0: File exists
vmboot: the bhyve command will be:
/usr/sbin/bhyve -c 1 -m 1024 -A -I -H -s 0,hostbridge -s 2,ahci-hd,./vm/freebsd1/freebsd1.img -s 3,virtio-net,tap1 -S 31,uart,stdio freebsd1
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.2-RELEASE #0 r255898: Thu Sep 26 22:50:31 UTC 2013
[email protected]:/usr/obj/usr/src/sys/GENERIC amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Core(TM) i7-3820QM CPU @ 2.70GHz (2693.64-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a Stepping = 9
Features=0xf83ab7f<FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,APIC,SEP,PGE,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
Features2=0xe2ba2203<SSE3,PCLMULQDQ,SSSE3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,AESNI,F16C,RDRAND,HV>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
real memory = 1073741824 (1024 MB)
avail memory = 1006927872 (960 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <BHYVE BVMADT >
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320)
ioapic0 <Version 1.1> irqs 0-16 on motherboard
kbd0 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff80d11010, 0) error 19
acpi0: <BHYVE BVXSDT> on motherboard
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.31.INTA
ahci0: <Intel ICH8 AHCI SATA controller> mem 0xc0000000-0xc00003ff at device 2.0 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
virtio_pci0: <VirtIO PCI Network adapter> port 0x2000-0x201f mem 0xc0002000-0xc0003fff at device 3.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x1018020 <NotifyOnEmpty,Status,MrgRxBuf,MacAddress>
virtio_pci0: negotiated features: 0x1018020 <NotifyOnEmpty,Status,MrgRxBuf,MacAddress>
vtnet0: Ethernet address: 00:a0:98:9c:28:d8
uart2: <16550 or compatible> port 0x3f8-0x3ff irq 4 at device 31.0 on pci0
uart2: console (9600,n,8,1)
Timecounters tick every 10.000 msec
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <BHYVE SATA DISK 001> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 2048MB (4194304 512 byte sectors: 0H 0S/T 0C)
ada0: Previously was known as ad4
Timecounter "TSC-low" frequency 1346820241 Hz quality 800
Trying to mount root from ufs:/dev/ada0p2 [rw]...
Setting hostuuid: ab72fd98-ba82-11e3-9fad-00a0989c28d8.
Setting hostid: 0x07078ee7.
Entropy harvesting:.
Starting file system checks:
/dev/ada0p2: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0p2: clean, 293520 free (608 frags, 36614 blocks, 0.1% fragmentation)
Mounting local file systems:.
Setting hostname: freebsd-vm.
vtnet0: link state changed to UP
Starting Network: lo0 vtnet0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
vtnet0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80028<VLAN_MTU,JUMBO_MTU,LINKSTATE>
ether 00:a0:98:9c:28:d8
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 1000baseT <full-duplex>
status: active
Starting devd.
Starting dhclient.
DHCPREQUEST on vtnet0 to 255.255.255.255 port 67
DHCPACK from 172.16.143.254
bound to 172.16.143.165 -- renewal in 900 seconds.
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
32-bit compatibility ldconfig path: /usr/lib32
Clearing /tmp (X related).
Updating motd:.
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.
Wed Apr 2 20:18:37 JST 2014
FreeBSD/amd64 (freebsd-vm) (console)
login: Apr 2 20:18:37 freebsd-vm getty[771]: open /dev/ttyv0: No such file or directory
Apr 2 20:18:37 freebsd-vm getty[772]: open /dev/ttyv1: No such file or directory
Apr 2 20:18:37 freebsd-vm getty[774]: open /dev/ttyv3: No such file or directory
Apr 2 20:18:37 freebsd-vm getty[775]: open /dev/ttyv4: No such file or directory
Apr 2 20:18:37 freebsd-vm getty[776]: open /dev/ttyv5: No such file or directory
Apr 2 20:18:37 freebsd-vm getty[777]: open /dev/ttyv6: No such file or directory
Apr 2 20:18:37 freebsd-vm getty[778]: open /dev/ttyv7: No such file or directory
Apr 2 20:18:37 freebsd-vm getty[773]: open /dev/ttyv2: No such file or directory
FreeBSD/amd64 (freebsd-vm) (console)
login: root
Password:
Apr 2 20:18:45 freebsd-vm login: ROOT LOGIN (root) ON console
Last login: Wed Apr 2 20:16:39 on console
FreeBSD 9.2-RELEASE (GENERIC) #0 r255898: Thu Sep 26 22:50:31 UTC 2013
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o Security advisories and updated errata information for all releases are
at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
for your release first as it's updated frequently.
o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and,
along with the mailing lists, can be searched by going to
http://www.FreeBSD.org/search/. If the doc package has been installed
(or fetched via pkg_add -r lang-freebsd-doc, where lang is the
2-letter language code, e.g. en), they are also available formatted
in /usr/local/share/doc/freebsd.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the [email protected] mailing list. If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page. If you are not familiar with manual pages, type `man man'.
Edit /etc/motd to change this login announcement.
root@freebsd-vm:~ # diff -u /etc/ttys.orig /etc/ttys
--- /etc/ttys.orig 2014-04-02 20:17:11.000000000 +0900
+++ /etc/ttys 2014-04-02 20:17:26.000000000 +0900
@@ -27,7 +27,8 @@
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
-console none unknown off secure
+#console none unknown off secure
+console "/usr/libexec/getty std.9600" vt100 on secure
#
ttyv0 "/usr/libexec/getty Pc" xterm on secure
# Virtual terminals
root@freebsd-vm:~ #
root@freebsd-vm:~ # shutdown -h now
Shutdown NOW!
shutdown: [pid 783]
root@freebsd-vm:~ #
*** FINAL System shutdown message from root@freebsd-vm ***
System going down IMMEDIATELY
Apr 2 20:19:06 freebsd-vm shutdown: halt by root:
System shutdown time has arrived
Stopping cron.
Stopping sshd.
Stopping devd.
Writing entropy file:.
Terminated
.
Apr 2 20:19:08 freebsd-vm syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 1 0 done
All buffers synced.
Uptime: 42s
The operating system has halted.
Please press any key to reboot.
Rebooting...
Entering vmdestroy()
vmdestroy: Destroying freebsd1
freebsd1 ungracefully stopped
vmdestroy: Destroying tap1
ori@freebsd-master:~/work/bhyve-script %
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment