smartctl -a -d ata /dev/sdb

deviceattributes.txt

smartctl 5.43 2016-09-28 r4347 [x86_64-linux-2.6.32-042stab076.5] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST1000DM003-1CH162
Serial Number:    S1D6PXSW
LU WWN Device Id: 5 000c50 05b663c77
Firmware Version: CC44
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sat Feb  3 01:25:01 2018 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Error SMART Values Read failed: Input/output error
Smartctl: SMART Read Values failed.

=== START OF READ SMART DATA SECTION ===
Error SMART Status command failed: Input/output error
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

SMART Error Log Version: 1
ATA Error Count: 3333 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3333 occurred at disk power-on lifetime: 43741 hours (1822 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 10 ff ff ff 4f 00      00:40:59.339  READ FPDMA QUEUED
  60 00 10 ff ff ff 4f 00      00:40:59.339  READ FPDMA QUEUED
  60 00 20 ff ff ff 4f 00      00:40:59.339  READ FPDMA QUEUED
  60 00 30 ff ff ff 4f 00      00:40:59.338  READ FPDMA QUEUED
  60 00 10 ff ff ff 4f 00      00:40:59.338  READ FPDMA QUEUED

Error 3332 occurred at disk power-on lifetime: 43739 hours (1822 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 10 ff ff ff 4f 00   2d+14:08:02.839  READ FPDMA QUEUED
  ea 00 00 00 00 00 a0 00   2d+14:08:02.791  FLUSH CACHE EXT
  60 00 10 ff ff ff 4f 00   2d+14:08:02.751  READ FPDMA QUEUED
  61 00 10 ff ff ff 4f 00   2d+14:08:02.751  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 00   2d+14:08:02.740  FLUSH CACHE EXT

Error 3331 occurred at disk power-on lifetime: 43738 hours (1822 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: WP at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 10 ff ff ff 4f 00   2d+13:51:42.375  WRITE FPDMA QUEUED
  61 00 10 ff ff ff 4f 00   2d+13:51:42.375  WRITE FPDMA QUEUED
  61 00 10 ff ff ff 4f 00   2d+13:51:42.375  WRITE FPDMA QUEUED
  61 00 10 ff ff ff 4f 00   2d+13:51:42.375  WRITE FPDMA QUEUED
  61 00 10 ff ff ff 4f 00   2d+13:51:42.375  WRITE FPDMA QUEUED

Error 3330 occurred at disk power-on lifetime: 43738 hours (1822 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: WP at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 08 60 6b 3a 4b 00   2d+13:49:40.437  WRITE FPDMA QUEUED
  61 00 08 78 93 21 4b 00   2d+13:49:40.437  WRITE FPDMA QUEUED
  61 00 08 38 53 f7 4a 00   2d+13:49:40.437  WRITE FPDMA QUEUED
  61 00 20 c0 93 59 4a 00   2d+13:49:40.437  WRITE FPDMA QUEUED
  60 00 10 ff ff ff 4f 00   2d+13:49:40.437  READ FPDMA QUEUED

Error 3329 occurred at disk power-on lifetime: 43738 hours (1822 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: WP at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 10 20 7f d1 4a 00   2d+13:49:32.504  WRITE FPDMA QUEUED
  61 00 08 a8 12 b8 4a 00   2d+13:49:32.504  WRITE FPDMA QUEUED
  61 00 10 80 0d b8 4a 00   2d+13:49:32.504  WRITE FPDMA QUEUED
  61 00 08 98 92 b7 4a 00   2d+13:49:32.504  WRITE FPDMA QUEUED
  61 00 18 d0 7e b7 4a 00   2d+13:49:32.503  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         0         -

Device does not support Selective Self Tests/Logging