Cloudflare WARP linux client (using wg-quick for actual tunnel setup)

wgcf.py

#!/usr/bin/env python3

import subprocess
import json
import os
from pathlib import Path

import requests
from requests.compat import urljoin


class CloudflareWarp():
    API_URL = "https://api.cloudflareclient.com/v0a774/"
    _session = None

    def __init__(self, account, token):
        self.id = account
        self.token = token

    def __repr__(self):
        return f"CloudflareWarp({self.id}, {self.token})"

    def _getsession(self):
        if self._session is None:
            self._session = requests.session()
            self._session.headers.update(
                    Authorization=f"Bearer {self.token}",
            )
        return self._session

    def getregurl(self):
        return urljoin(self.API_URL, f"reg/{self.id}")

    def getregstate(self):
        s = self._getsession()
        self.state = s.get(self.getregurl()).json()
        return self.state

    def patchreg(self, data):
        s = self._getsession()
        self.state = s.patch(self.getregurl(), json=data).json()
        return self.state

    def submit_key(self, key):
        return self.patchreg({"key": key})

    def deregister(self):
        s = self._getsession()
        s.delete(self.getregurl())

    @classmethod
    def register(cls, creds_path=None):
        url = urljoin(cls.API_URL, "reg")
        r = requests.post(url).json()
        print('Registered as', r['id'], 'with auth token', r['token'])
        if creds_path:
            with open(creds_path, "w") as outf:
                json.dump(r, outf)
        return cls(r['id'], r['token'])

    @classmethod
    def from_json(cls, path):
        with open(path) as inf:
            r = json.load(inf)
            return cls(r['id'], r['token'])


def wg_keypair():
    p = subprocess.run(
            ["wg", "genkey"],
            stdout=subprocess.PIPE,
            encoding="ascii",
    )
    private = p.stdout.strip()
    p = subprocess.run(
            ["wg", "pubkey"],
            stdout=subprocess.PIPE,
            encoding="ascii",
            input=private,
    )
    return (private, p.stdout.strip())


def wg_quick_conffile(privkey, cfconfig):
    return f"""[Interface]
PrivateKey = {privkey}
Address = {cfconfig['interface']['addresses']['v4']}
Address = {cfconfig['interface']['addresses']['v6']}
DNS = 1.1.1.1
MTU = 1400
# This fixes up IPv6 depreference due to the use of unique local addressing
Address = 2001:db8{cfconfig['interface']['addresses']['v6'][9:]}
PostUp = ip6tables -t nat -I POSTROUTING 1 -o %i -j SNAT --to-source {cfconfig['interface']['addresses']['v6']}
PreDown = ip6tables -t nat -D POSTROUTING 1

[Peer]
PublicKey = {cfconfig['peers'][0]['public_key']}
Endpoint = {cfconfig['peers'][0]['endpoint']['host']}
#Endpoint = {cfconfig['peers'][0]['endpoint']['v4']}
#Endpoint = {cfconfig['peers'][0]['endpoint']['v6']}
AllowedIPs = 0.0.0.0/0
AllowedIPs = ::/0
"""


def main():
    cfgpath = Path("~/.wgcf/").expanduser()
    credfile = cfgpath / "creds.json"
    wgfile = cfgpath / "wgcf.conf"
    os.makedirs(cfgpath, exist_ok=True)
    try:
        cf = CloudflareWarp.from_json(credfile)
    except (FileNotFoundError, json.decoder.JSONDecodeError):
        cf = CloudflareWarp.register(credfile)
    priv, pub = wg_keypair()
    c = cf.submit_key(pub)["config"]
    with open(wgfile, "w") as outf:
        outf.write(wg_quick_conffile(priv, c))
    print("To connect, run as root:")
    print("# wg-quick up", wgfile)


if __name__ == '__main__':
    main()

wgcf.sh

#!/usr/bin/env bash
set -euo pipefail
shopt -s inherit_errexit 2>/dev/null || true

# this script will generate wg-quick(8) config file
# in order to connect to Cloudflare Warp using Wireguard on Linux
# note: this is *absolutely not* an official client from Cloudflare

# Copyright (C) 2019 Ondrej Caletka
# based heavily on macOS client by Jay Freeman (saurik)
# Original source: https://cache.saurik.com/twitter/wgcf.sh

# Zero Clause BSD license {{{
#
# Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
# }}}

if ! which jq >/dev/null || ! which wg >/dev/null; then
    echo "Please install jq and wireguard-tools"
    exit 0
fi

mkdir -p ~/.wgcf
chmod 700 ~/.wgcf
prv=~/.wgcf/private.key
usr=~/.wgcf/identity.cfg
cnf=~/.wgcf/wgcf.conf

pub=$({ cat "${prv}" 2>/dev/null || wg genkey | tee "${prv}"; } | wg pubkey)
test -n "${pub}"

api=https://api.cloudflareclient.com/v0i1909051800
ins() { vrb=$1; shift; curl -s -H 'user-agent:' -H 'content-type: application/json' -X "${vrb}" "${api}/$@"; }
sec() { ins "$@" -H 'authorization: Bearer '"${reg[1]}"''; }

cfgjson=$(if [[ -e "${usr}" ]]; then
    reg=($(cat "${usr}"))
    test "${#reg[@]}" -eq 2
    sec GET "reg/${reg[0]}"
else
    reg=($(ins POST "reg" -d '{"install_id":"","tos":"'"$(date -u +%FT%T.000Z)"'","key":"'"${pub}"'","fcm_token":"","type":"ios","locale":"en_US"}' |
        jq -r '.result|.id+" "+.token'))
    test "${#reg[@]}" -eq 2
    echo "${reg[@]}" >"${usr}"
    sec PATCH "reg/${reg[0]}" -d '{"warp_enabled":true}'
    fi)
# echo $cfgjson
cfg=($(echo $cfgjson| jq -r '.result.config|(.peers[0]|.public_key+" "+.endpoint.host)+" "+(.interface.addresses|.v4+" "+.v6)'))
test "${#cfg[@]}" -eq 4

cat >"$cnf" <<EOF
[Interface]
PrivateKey = $(cat "${prv}")
DNS = 1.1.1.1
Address = ${cfg[2]}
Address = ${cfg[3]}
MTU = 1400
# This fixes up IPv6 depreference due to the use of unique local addressing
Address = ${cfg[3]/#fd01:5ca1:/2001:db8:}
PostUp = ip6tables -t nat -I POSTROUTING 1 -o %i -j SNAT --to-source ${cfg[3]}
PreDown = ip6tables -t nat -D POSTROUTING 1

[Peer]
PublicKey = ${cfg[0]}
AllowedIPs = 0.0.0.0/0
AllowedIPs = ::/0
Endpoint = ${cfg[1]}
EOF

echo "To connect, run as root:"
echo "# wg-quick up ${cnf}"
echo ""
echo "To disconnect, run as root:"
echo "# wg-quick down ${cnf}"

how to copy gererated file to storage/shared?

It's not working for me. I'm connecting to the cloudflare network, but next I don't have access to the Internet.
I changed the resulting config for use with firewalld, but that is not the problem because it worked for me a week ago.

From my experience, it does not work from time to time. Disconnecting and reconnecting usually fixes the problem for me. I guess this has something to do with the slight diversion of the Wireguard protocol used in Cloudflare's implementation.

@luv2dnce33 this does not look like Linux. Your issue is very probably caused by missing IPv6 NAT rule from the fake IPv6 address 2001:db8… that I put into the config in order to avoid IPv6 depreference. You can probably fix your problem by removing the three lines below this comment in wgcf.conf:

# This fixes up IPv6 depreference due to the use of unique local addressing

Another reason could be a MTU issue (TLS handshake is usually big). Try lowering MTU of the tunnel interface.

Are there Mac OS equivalents for PostUp and PreDown procedures?

I have no idea, sorry.

@oskar456 wgcf.sh also not works for me.
I getting all credentials (3, not-empty files) in ~/.wgcf
I don't get any errors from doas wg-quick up ~/.wgcf/wgcf.conf and I getting wgcf interface is up
but nothing is pinging, only 172.16.0.2 is pinging, 1.1.1.1 not pinging.
Web pages do not open, but telegram-desktop is works (how?)
I reduce MTU from 1400 to 1300 and 1280.
I commenting 3 strings, as you said

~ $ cat /etc/resolv.conf
# Generated by resolvconf
nameserver 1.1.1.1

on mobile phone warp is works with same internet provider as on desktop

Hi. Both the python and bash script don't work for me anymore. I guess Cloudflare changed something on their end.
I get
"parse error: Invalid numeric literal at line 1, column 6"
"error code 1020"
when running the shell script.
Can you look into that :) ?

Indeed, the registration yields 403 error from Cloudflare. I don't know how to fix this.

error code 1020 +1

This script still works: https://github.com/ViRb3/cloudflare-warp-wireguard-client/blob/master/wgcf.py
But I wish it was converted to bash shell. Maybe this can be used to figure out what is currently broken.

I'm pretty sure the problems are caused by missing components of JSON body sent to /reg endpoint along here and here. It used to work with empty body, but probably due to people abusing referral registrations to get WARP+ credit for free (although I don't see any practical difference between WARP and WARP+), they made some stricter validation of registrations.

I don't have time right now to experiment with that. Feel free to experiment yourself or use some other implementations. This one looks pretty easy to use:

$ wget https://cf-warp.glitch.me/warp.conf

Traceback (most recent call last):
  File "wgcf.py", line 124, in <module>
    main()
  File "wgcf.py", line 114, in main
    cf = CloudflareWarp.register(credfile)
  File "wgcf.py", line 54, in register
    r = requests.post(url).json()
  File "/usr/lib/python3/dist-packages/requests/models.py", line 897, in json
    return complexjson.loads(self.text, **kwargs)
  File "/usr/lib/python3.7/json/__init__.py", line 348, in loads
    return _default_decoder.decode(s)
  File "/usr/lib/python3.7/json/decoder.py", line 337, in decode
    obj, end = self.raw_decode(s, idx=_w(s, 0).end())
  File "/usr/lib/python3.7/json/decoder.py", line 355, in raw_decode
    raise JSONDecodeError("Expecting value", s, err.value) from None
json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)