A Tale of 3 Nightclubs

3nightclubs.scala

/**
 * Part Zero : 10:15 Saturday Night
 *
 * (In which we will see how to let the type system help you handle failure)...
 *
 * First let's define a domain. (All the following requires scala 2.9.x and scalaz 6.0)
 */

import scalaz._
import Scalaz._

object Sobriety extends Enumeration { val Sober, Tipsy, Drunk, Paralytic, Unconscious = Value }

object Gender extends Enumeration { val Male, Female = Value }

case class Person(gender : Gender.Value, age : Int, clothes : Set[String], sobriety : Sobriety.Value)

/**
 * Let's define a trait which will contain the checks that *all* nightclubs make!
 */
trait Nightclub {

  //First CHECK
  def checkAge(p : Person)  : Validation[String, Person]
     = if (p.age < 18)
         "Too Young!".fail
        else if (p.age > 40)
          "Too Old!".fail
        else
            p.success

  //Second CHECK
  def checkClothes(p : Person)  : Validation[String, Person]
    = if (p.gender == Gender.Male && !p.clothes("Tie"))
        "Smarten Up!".fail
      else if (p.gender == Gender.Female && p.clothes("Trainers"))
        "Wear high heels".fail
      else
        p.success

  //Third CHECK
  def checkSobriety(p : Person): Validation[String, Person]
    = if (Set(Sobriety.Drunk, Sobriety.Paralytic, Sobriety.Unconscious) contains p.sobriety)
        "Sober Up!".fail
      else
        p.success
}

/**
 * Part One : Clubbed to Death
 *
 * Now let's compose some validation checks
 *
 */
object ClubbedToDeath extends Nightclub {
  def costToEnter(p : Person) : Validation[String, Double] = {

    //PERFORM THE CHECKS USING Monadic "for comprehension" SUGAR
    for {
      a <- checkAge(p)
      b <- checkClothes(a)
      c <- checkSobriety(b)
    } yield (if (c.gender == Gender.Female) 0D else 5D)
  }
}

// Now let's see these in action
object Test1 {
  val Ken = Person(Gender.Male, 28, Set("Tie", "Shirt"), Sobriety.Tipsy)

  val Dave = Person(Gender.Male, 41, Set("Tie", "Jeans"), Sobriety.Sober)

  val Ruby = Person(Gender.Female, 25, Set("High Heels"), Sobriety.Tipsy)

// Let's go clubbing!

  ClubbedToDeath costToEnter Dave //res0: scalaz.Validation[String,Double] = Failure(Too Old!)

  ClubbedToDeath costToEnter Ken //res1: scalaz.Validation[String,Double] = Success(5.0)

  ClubbedToDeath costToEnter Ruby //res2: scalaz.Validation[String,Double] = Success(0.0)

  ClubbedToDeath costToEnter (Ruby.copy(age = 17)) //res3: scalaz.Validation[String,Double] = Failure(Too Young!)

  ClubbedToDeath costToEnter (Ken.copy(sobriety = Sobriety.Unconscious)) //res5: scalaz.Validation[String,Double] = Failure(Sober Up!)

}
/**
 * The thing to note here is how the Validations can be composed together in a for-comprehension.
 * Scala's type system is making sure that   failures flow through your computation in a safe manner.
 */


/**
 * Part Two : Club Tropicana
 *
 * Part One showed monadic composition, which from the perspective of Validation is *fail-fast*.
 * That is, any failed check shortcircuits subsequent checks. This nicely models nightclubs in the
 * real world, as anyone who has dashed home for a pair of smart shoes and returned, only to be
 * told that your tie does not pass muster, will attest.
 *
 * But what about an ideal nightclub? One that tells you *everything* that is wrong with you.
 *
 * Applicative functors to the rescue!
 *
 */

object ClubTropicana extends Nightclub {
  def costToEnter(p : Person) : ValidationNEL[String, Double] = {

    //PERFORM THE CHECKS USING applicative functors, accumulating failure via a monoid (a NonEmptyList, or NEL)
    (checkAge(p).liftFailNel |@| checkClothes(p).liftFailNel |@| checkSobriety(p).liftFailNel)  {
      case (_, _, c) => if (c.gender == Gender.Female) 0D else 7.5D
    }
  }
}

/**
 *
 * And the use? Dave tried the second nightclub after a few more drinks in the pub
 *
 */
object Test2 {
  import Test1._
  ClubTropicana costToEnter (Dave.copy(sobriety = Sobriety.Paralytic)) //res6: scalaz.Scalaz.ValidationNEL[String,Double] = Failure(NonEmptyList(Too Old!, Sober Up!))

  ClubTropicana costToEnter(Ruby) //res7: scalaz.Scalaz.ValidationNEL[String,Double] = Success(0.0)

}
/**
 *
 * So, what have we done? Well, with a *tiny change* (and no changes to the individual checks themselves),
 * we have completely changed the behaviour to accumulate all errors, rather than halting at the first sign
 * of trouble. Imagine trying to do this in Java, using exceptions, with ten checks.
 *
 */

/**
 *
 * Part Three : Gay Bar
 *
 * And for those wondering how to do this with a *very long list* of checks. Use sequence:
 *   List[ValidationNEL[E, A]] ~> (via sequence) ~> ValidationNEL[E, List[A]]
 *
 * Here we go (unfortunately we need to use a type lambda on the call to sequence):
 *
 */
object GayBar extends Nightclub {

  def checkGender(p : Person) : Validation[String, Person] =
    if (p.gender != Gender.Male)
      "Men Only".fail
    else
      p.success

  def costToEnter(p : Person) : ValidationNEL[String, Double] = {
    val checks = List(checkAge _, checkClothes _, checkSobriety _, checkGender _)
    (checks map {(_ : (Person => Validation[String, Person])).apply(p).liftFailNel}).sequence[({type l[a]=ValidationNEL[String, a]})#l, Person] map { 
       case c :: _ => c.age + 1.5D
    }
  }

  //Interestingly, as traverse is basically map + sequence, we can reduce this even further

  def costToEnter2(p : Person) : ValidationNEL[String, Double] = {
    val checks = List(checkAge _, checkClothes _, checkSobriety _, checkGender _)
    checks.traverse[({type l[a] = ValidationNEL[String, a]})#l, Person](_ andThen (_.liftFailNel) apply p) map { case c :: _ => c.age + 1.5D }
  }

}

object Test3 {
  import GayBar._

  def main(args: Array[String]) {
    costToEnter(Person(Gender.Male, 59, Set("Jeans"), Sobriety.Paralytic)))  //Failure(NonEmptyList(Too Old!, Smarten Up!, Sober Up!))
    costToEnter2(Person(Gender.Male, 59, Set("Jeans"), Sobriety.Paralytic))) //Failure(NonEmptyList(Too Old!, Smarten Up!, Sober Up!))
  }
}

/**
 * As always; the point is that our validation functions are "static";
 * we do not need to change the way they have been coded because we want to combine them in different ways
 */

Can you do sequence? Obviously you can use Either's right-projection in a monadic way

…

On Mon, Apr 30, 2012 at 4:48 PM, Rob Dickens < ***@***.*** > wrote: Chris, I seem to have found a way to do the above validation without the aid of Scalaz. Have just blogged it here: http://robsscala.blogspot.co.uk/2012/04/validation-without-scalaz.html --- Reply to this email directly or view it on GitHub: https://gist.github.com/970717

Your implementation of the ApplicativeBuilder is also restricted. My example is actually a bit rubbish because it does not really demonstrate the following: ``` ValidationNel[X, A] |@| ValidationNel[X, B] apply (f: (A, B) => C) : ``` ValidationNel[X, C] That is, the great thing is that the successful part of the validations is being passed into the function application. In my example, the success case is actually just the original person. The utility of this can be seen when (for example) parsing a file full of stuff: ``` (parseNumber("Qty") |@| parseDecimal("Price") |@| ``` parseInstrument("Investment"))(Trade.apply) Where Trade is a case class: ``` case class Trade(qty: Int, px: Double, inv: Investment) ``` So you can say: (lines map f).sequence //lines is Stream[String], f is the function defined above using applicative Which is just (of course) lines traverse f Chris

…

On Mon, Apr 30, 2012 at 4:48 PM, Rob Dickens < ***@***.*** > wrote: Chris, I seem to have found a way to do the above validation without the aid of Scalaz. Have just blogged it here: http://robsscala.blogspot.co.uk/2012/04/validation-without-scalaz.html --- Reply to this email directly or view it on GitHub: https://gist.github.com/970717

Hi. Yes it can. The check (or checkAndMap) method takes a variable number of arguments (check functions). So you do a p.check(checks: _*).

Okay - all I've done is to provide a couple of implicit methods which can be called on a single value. But let me have a think!

There's another point here, Rob. The *exact *same "applicative" pattern can be used in a number of contexts and behaves as you would expect. For example: Option[A] |@| Option[B] apply (f: (A, B) => C) ~~> Option[C] Promise[A] |@| Promise[B] apply (f: (A, B) => C) ~~> Promise[C] List[A] |@| List[B] apply (f: (A, B) => C) ~~> List[C] ..obviously I could go on. But we also get other behaviour in scalaz which is useful. For example, <+> gives us orElse, again consistently between types: Option[A] <+> Option[A] ~~> Option[A](equivalent to orElse) Validation[X, A] <+> Validation[X, A] ~~> Validation[X, A](an orElse for validations, which is fail-slow) I totally agree on a general level about not wanting a big dependency for a small feature - I apply the same rationale myself. But that is where scalaz wins hands-down, I think. There's a ton of great stuff in there Chris

…

On Mon, Apr 30, 2012 at 6:12 PM, Rob Dickens < ***@***.*** > wrote: Okay - all I've done is to provide a couple of implicit methods which can be called on a single value. But let me have a think! --- Reply to this email directly or view it on GitHub: https://gist.github.com/970717

Hi Chris,
I've had that think, and now added the applicative-functor support:
http://robsscala.blogspot.co.uk/2012/05/validating-multiple-values-at-once.html
The code is now more that a few lines long, but there is still only one new classname to mention in your own code.
Granted, it only applies to Either, but that alone can get you a long way.
Rob

Hey @oxblowlakes, many thanks for publishing this gist. It's super helpful. I have a problem though - when I try to run it, I get:

value liftFailNel is not a member of scalaz.Validation[String,Name]
[error]     def mkPerson(name: String, age: Int) = (Name(name).liftFailNel ⊛ Age(age).liftFailNel){ (n, a) =>    
Person(n, a)}

I'm using Scalaz 7.0-SNAPSHOT. I've tried Tony's example code too and got the same problem... Any ideas what might be going on?

Edit: looks like liftFailNel is a Scalaz 6 thing - I'm trying out toValidationNEL as a replacement...

Hi - I am not sure if I can submit a PR to gists, but at https://gist.github.com/justjoheinz/9184859 there is a version updated for scalaz 7.0.5

thanks for sharing - nice example!