Installing NVIDIA drivers on a realtime Linux (PREEMPT-RT)

nvidia-driver-realtime.sh

# Tested on Ubuntu 16.04 and X11, 2019

# 1. Download NVIDIA driver as a .run file

# 2. Stop X-Server
sudo service lightdm stop

# 3. Blacklist Nouveau driver
sudo nano /etc/modprobe.d/blacklist-nouveau.conf

# Insert into file:
#  blacklist nouveau
#  options nouveau modeset=0

# 4. Update kernel initramfs
sudo update-initramfs -u
sudo reboot  # I'm not sure if needed

# 5. Install driver!
sudo IGNORE_PREEMPT_RT_PRESENCE=1 bash <*>.run  # Insert downloaded .run file

# 6. Reboot
sudo reboot

Hi @racarla96,

Are you looking to install the realtime version from the 6.8 branch? I'd be happy to help you get it set up properly.
To provide you with the most accurate guidance, could you please share some details about your current setup:

Your current Linux distribution and version
Hardware specifications (CPU architecture, etc.)
What specific realtime features you're planning to use
Any particular use case or application you have in mind

As the author and maintainer of the Sunlight Linux kernel, I can provide you with detailed installation instructions, configuration recommendations, and help troubleshoot any issues you might encounter during the process.
For more efficient communication and detailed technical support, feel free to reach out to me directly at: [email protected]
This way we can have a more streamlined conversation and I can provide you with personalized assistance based on your specific needs.

Best regards,
Ionut Nechita
ionutnechita
Sunlight Developer Kernel - AMD/Intel Lowlatency Platform

yes with the runfil is it possible to install nvidia-driver on 6.12 rt kernel !!

but when you install cuda with runfile and compile ffmpeg --eenable-cuda-nvcc the error is nvcc not found

when i install nvidia-cuda-toolkit wih apt without repro from nvidia nvcc was found

but when i install cuda with apt i must install nvidia-driver also and than i have no realtime kernel

regards spooky