http://patriqueouimet.com/post/settings-up-windows-subsystem-for-linux-for-laravel-development-lemp

settings-up-windows-subsystem-for-linux-for-laravel-development-lemp

## Introduction

This is a guide on how to get setup with Windows Subsystem for Linux (Ubuntu) for Laravel Development (LEMP). Which gives you the flexibility of the Linux terminal and the application compatibility of Windows.

Recently I decided to switch from Ubuntu 16.04 to Windows 10 Pro as I wanted access to applications that are not available on Linux based operating systems (i.e. Microsoft Office 2016, Adobe Suite). I know there are plenty of alternatives (or things like Play on Linux, Lutris, Crossover), but I wanted to tests on what my customers are using and I got tired of using virtual machines.
All that to say that I’ve got Ubuntu application (Windows Subsystem for Linux) working on Windows 10 Pro, so I didn’t lose any of the power of the Linux terminal but gained all the application compatibility of the Windows 10 operating system.

### Caveats
I’m using the Insider Program builds so my current system looks like:

* Edition: **Windows 10 Pro**
* Version: **1709**
* OS Build: **16288.1**

Also, I do realize there are other versions of Linux based operating systems you can install from the Windows Store, but for the purpose of this article I will assume you have installed the Ubuntu application.

#### Update/Upgrade Before Starting the Guide

Before we get into setting up LEMP, let’s make sure Ubuntu is up to date, open the Ubuntu application and run the following:
```
sudo apt-get update && upgrade
```
NOTE: ignore any messages relating to `rc.update`

## LEMP (Linux, Nginx, MySQL, PHP)

### Nginx

Install Nginx
```
sudo apt-get install nginx
```

### MySQL

Install MySQL
```
sudo apt-get install mysql-server
```

### PHP (FPM) with Extensions
```
sudo apt-get install php-fpm php7.0-zip php-curl php-cli php-mysql php-common php-mbstring php-xml
```

### Tweaking FPM
```
sudo nano /etc/php/7.0/fpm/php.ini
```
TIP: Within nano press Ctrl+W then type in "fix_pathinfo=1" then press Enter, should bring you right to the line to change.
Once the editor (nano) is open, find and uncomment the line with `cgi.fix_pathinfo` and set the value to
```
cgi.fix_pathinfo=0
```
## Setting up Git
```
sudo apt-get update
sudo apt-get install git
```

## Setting up Composer
```
curl -sS https://getcomposer.org/installer | sudo php -- --install-dir=/usr/local/bin --filename=composer
```

## Setting up Laravel Valet (Linux)

We'll need to install a few dependencies Valet Linux has
```
sudo apt-get update
sudo apt-get install network-manager libnss3-tools jq xsel
```

Then install the package globally via composer
```
composer global require cpriego/valet-linux
```

Now add composer's vendor bin to the bottom of your `.bashrc`
```
export PATH="$PATH:$HOME/.composer/vendor/bin"
```

Source you're `.bashrc`
```
source ~/.bashrc
```

Now install dnsmasq
```
sudo apt-get install dnsmasq
```

Create a directory for it within your `/etc/NetworkManager` directory
```
sudo mkdir /etc/NetworkManager/dnsmasq.d
```

Now install Valet
```
valet install
```

## Fixing issues with DNS, FPM, and Nginx

First let's fix Nginx, you'll need to edit `/etc/nginx/sites-available/valet.conf`, update the line that contains `fastcgi_pass` to:
```
fastcgi_pass 127.0.0.1:9000;
```

We'll do the same for FPM, edit `/etc/php/7.0/fpm/pool.d/valet.conf`, update the line that contains `listen = /home/{user}/.valet/valet.sock;` to:
```
listen = 127.0.0.1:9000;
```

Valet's routing uses wildcards within the hosts file `*.dev` so you can visit your projects at your project name with the top level domain `dev` (i.e. `my-project.dev`). Unfortunately Windows hosts file doesn't allow us to do this, so I've opted to use:
[Acrylic DNS Proxy](http://mayakron.altervista.org/wikibase/show.php?id=AcrylicHome)

Once you install Acrylic DNS Proxy, open your start menu and search for "Edit Acrylic Hosts File" then click it. Scroll to the bottom of the file comment out the existing entries and add `127.0.0.1 *.dev`, the end of your file should look something like this:
```
# 127.0.0.1 localhost localhost.localdomain
# ::1 localhost localhost.localdomain
127.0.0.1 *.dev
```

We need to update our network adapters DNS server IP address to use Acrylic's (localhost).

Do the following steps:

1. Open Control Panel
2. Click "Network and Internet"
3. Click "Network and Sharing Center"
4. Click "Change adapter settings"
5. Right click on your internet adapter
6. Click "Properties"
7. Click on "Internet Protocol Version 4 (TCP/IPv4)"
8. Click "Properties"
9. Click "Use the following DNS server addresses"
10. Add "127.0.0.1" to "Preferred DNS Server"
11. Run a program call "Purge Acrylic Cache Data", say yes to all the prompts
12. Open Command Prompt and run "ipconfig /flushdns"

## Automating Starting of Services

WSL doesn't start services on start up, so we'll add a script to do it.
Here's a simple start services script I've create `~/lemp-start.sh`:
```
#!/bin/bash

if ps ax | grep -v grep | grep 'php-fpm' > /dev/null
then
    echo 'FPM is running'
else
    sudo service php7.0-fpm start
fi

if ps ax | grep -v grep | grep 'nginx' > /dev/null
then
    echo 'Nginx is running'
else
   sudo service nginx start
fi

if ps ax | grep -v grep | grep 'mysql' > /dev/null
then
    echo 'MySQL is running'
else
    sudo service mysql start
fi
```

To have this run when you open the Ubuntu application we have to add it your `~/.bashrc` file:
```
~/lemp-start.sh
```

Now close your Ubuntu applications and reopen it. You'll be prompted for your sudo password and should see the services starting.

## A Note on Project Directories

**DO NOT** place your projects (or root valet directory) within the Ubuntu file system. My suggestion would be to place it on the C drive. In example, I place all my code here (where `{USERNAME}` is your Windows user name):
```
/mnt/c/Users/{USERNAME}/code
```
So if you had a project named `test` it would live in `/mnt/c/Users/{USERNAME}/code/test`.

If you're curious why not to have files on the Ubuntu file system, have a look [here](https://blogs.msdn.microsoft.com/commandline/2016/11/17/do-not-change-linux-files-using-windows-apps-and-tools/).

## Valet Link, Let's See it in Action!

Now that everything is in place, let's test it!

Let's try a new laravel project (remember `{USERNAME}` is your Windows user name)
```
cd /mnt/c/Users/{USERNAME}/code
composer create-project --prefer-dist laravel/laravel blog
```

Once the install is complete, link the directory with Valet:
```
cd /mnt/c/Users/{USERNAME}/code/blog
valet link
```

And visit `blog.dev` in your browser.

### Extras

At the time of writing this post `systemctl` (for `systemd`) command outputs an error but `service` command still works:
```
sudo systemctl status nginx
Failed to connect to bus: No such file or directory
```

## Conclusion

I want to give a big shout out to the Windows development team and all the contributors [BashOnWindows](https://github.com/Microsoft/BashOnWindows) for all the work done on this, it has come a long way since the initial Creators update. I used to dread working on Windows with LEMP stack but now it's a breeze. I know a lot of people would just use a virtual machine but I still prefer this setup. Also, big shout out to Samuel Hilson for his article on this topic, this post is largely based on his work, you can find a link to his article in the resources section.

Hope you liked my article, please leave comments and share if you liked it!

### Resources
* [Experimenting with Windows Subsystem for Linux and Web Development](https://hackernoon.com/experimenting-with-windows-subsystem-for-linux-and-web-development-85180b90382f)
* [[Guide] Developing on Windows 10 using WSL](https://discourse.roots.io/t/guide-developing-on-windows-10-using-wsl/9380)

### Gist
* https://gist.github.com/patoui/0ab730869378060c1ded8a0bc2fb333c

I wasn't able to get Valet install to work. It complains about installation in the root.

In Requirements.php line 52:

Valet home directory is inside /root

If I change user it doesn't find valet even though composer global show command indicates it is installed.