Last active
October 21, 2022 12:01
-
-
Save patrickdk77/947799a3feaf4467df6fae359eb0afed to your computer and use it in GitHub Desktop.
Sprinkler System esphome
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| substitutions: | |
| display_name: Sprinkler | |
| heartbeat: 900s | |
| esphome: | |
| name: sprinkler | |
| platform: ESP8266 | |
| board: d1_mini | |
| board_flash_mode: dout | |
| esp8266_restore_from_flash: true | |
| wifi: | |
| ssid: !secret wifi_ssid | |
| password: !secret wifi_pass | |
| fast_connect: off | |
| manual_ip: | |
| static_ip: !secret ip_sprinkler | |
| gateway: !secret ip_gateway | |
| subnet: !secret ip_subnet | |
| dns1: !secret ip_dns1 | |
| dns2: !secret ip_dns2 | |
| #captive_portal: | |
| logger: | |
| baud_rate: 0 | |
| # level: NONE | |
| api: | |
| # password: !secret portal_pass | |
| ota: | |
| # password: !secret portal_pass | |
| web_server: | |
| port: 80 | |
| #mqtt: | |
| # broker: !secret mqtt_broker | |
| # port: !secret mqtt_tls_port | |
| # username: !secret mqtt_user | |
| # password: !secret mqtt_pass | |
| # discovery: true | |
| # ssl_fingerprints: | |
| # - !secret mqtt_fingerprint_sha1 | |
| # Zone1 Nothing | |
| # Zone2 | |
| # Zone3 | |
| # Zone4 Back yard left side | |
| # Zone5 Back yard back | |
| # Zone6 | |
| # Zone7 | |
| # Zone8 | |
| # Zone9 | |
| # Zone10 | |
| # Zone11 | |
| # Zone12 | |
| sun: | |
| latitude: !secret latitude | |
| longitude: !secret longitude | |
| time: | |
| # - platform: homeassistant | |
| - platform: sntp | |
| timezone: !secret timezone | |
| servers: | |
| - !secret ip_ntp1 | |
| - !secret ip_ntp2 | |
| id: homeassistant_time | |
| # on_time: | |
| # - seconds: 0 | |
| # minutes: 10 | |
| # hours: 6,23 | |
| # then: | |
| # - switch.turn_off: master_disable | |
| # - delay: 5s | |
| # - switch.turn_on: zone5 | |
| # - delay: 900s | |
| # - switch.turn_off: zone5 | |
| # - delay: 5s | |
| # - switch.turn_on: master_disable | |
| # - delay: 5s | |
| # - switch.turn_off: master_disable | |
| # - delay: 5s | |
| # - switch.turn_on: master_disable | |
| # - seconds: 0 | |
| # minutes: 30 | |
| # hours: 8,17 | |
| # then: | |
| # - switch.turn_on: zone8 | |
| # - delay: 300s | |
| # - switch.turn_off: zone8 | |
| binary_sensor: | |
| - platform: gpio | |
| pin: | |
| number: GPIO16 | |
| mode: INPUT #pullup doesn't work add 10k resistor | |
| inverted: true | |
| filters: | |
| - delayed_on: 10s | |
| - delayed_off: 10s | |
| name: "${display_name} Rain Sense" | |
| id: rain | |
| on_state: | |
| then: | |
| - if: | |
| condition: | |
| binary_sensor.is_on: rain | |
| then: | |
| - switch.turn_off: relay_zone1 | |
| - switch.turn_off: relay_zone2 | |
| - switch.turn_off: relay_zone3 | |
| - switch.turn_off: relay_zone4 | |
| - switch.turn_off: relay_zone5 | |
| - switch.turn_off: relay_zone6 | |
| - switch.turn_off: relay_zone7 | |
| - switch.turn_off: relay_zone8 | |
| sn74hc595: | |
| - id: 'sn74hc595_hub' | |
| data_pin: GPIO12 | |
| clock_pin: GPIO14 | |
| latch_pin: GPIO13 | |
| oe_pin: GPIO0 | |
| sr_count: 1 | |
| switch: | |
| - platform: template | |
| name: "${display_name} Master Disable" | |
| id: master_disable | |
| restore_state: true | |
| turn_on_action: | |
| - switch.turn_off: relay_zone1 | |
| - switch.turn_off: relay_zone2 | |
| - switch.turn_off: relay_zone3 | |
| - switch.turn_off: relay_zone4 | |
| - switch.turn_off: relay_zone5 | |
| - switch.turn_off: relay_zone6 | |
| - switch.turn_off: relay_zone7 | |
| - switch.turn_off: relay_zone8 | |
| - switch.template.publish: | |
| id: master_disable | |
| state: ON | |
| turn_off_action: | |
| - switch.template.publish: | |
| id: master_disable | |
| state: OFF | |
| - platform: gpio | |
| internal: true | |
| id: relay_zone1 | |
| restore_mode: ALWAYS_OFF | |
| pin: | |
| sn74hc595: sn74hc595_hub | |
| number: 0 | |
| inverted: true | |
| - platform: gpio | |
| internal: true | |
| id: relay_zone2 | |
| restore_mode: ALWAYS_OFF | |
| pin: | |
| sn74hc595: sn74hc595_hub | |
| number: 1 | |
| inverted: true | |
| - platform: gpio | |
| internal: true | |
| id: relay_zone3 | |
| restore_mode: ALWAYS_OFF | |
| pin: | |
| sn74hc595: sn74hc595_hub | |
| number: 2 | |
| inverted: true | |
| - platform: gpio | |
| internal: true | |
| id: relay_zone4 | |
| restore_mode: ALWAYS_OFF | |
| pin: | |
| sn74hc595: sn74hc595_hub | |
| number: 3 | |
| inverted: true | |
| - platform: gpio | |
| internal: true | |
| id: relay_zone5 | |
| restore_mode: ALWAYS_OFF | |
| pin: | |
| sn74hc595: sn74hc595_hub | |
| number: 4 | |
| inverted: true | |
| - platform: gpio | |
| internal: true | |
| id: relay_zone6 | |
| restore_mode: ALWAYS_OFF | |
| pin: | |
| sn74hc595: sn74hc595_hub | |
| number: 5 | |
| inverted: true | |
| - platform: gpio | |
| internal: true | |
| id: relay_zone7 | |
| restore_mode: ALWAYS_OFF | |
| pin: | |
| sn74hc595: sn74hc595_hub | |
| number: 6 | |
| inverted: true | |
| - platform: gpio | |
| internal: true | |
| id: relay_zone8 | |
| restore_mode: ALWAYS_OFF | |
| pin: | |
| sn74hc595: sn74hc595_hub | |
| number: 7 | |
| inverted: true | |
| - platform: template | |
| name: "${display_name} Zone 1" | |
| id: zone1 | |
| lambda: |- | |
| if (id(relay_zone1).state) { | |
| return true; | |
| } else { | |
| return false; | |
| } | |
| turn_on_action: | |
| then: | |
| if: | |
| condition: | |
| - binary_sensor.is_off: rain | |
| - switch.is_off: master_disable | |
| then: | |
| - switch.turn_on: relay_zone1 | |
| - switch.template.publish: | |
| id: zone1 | |
| state: ON | |
| else: | |
| - switch.template.publish: | |
| id: zone1 | |
| state: OFF | |
| turn_off_action: | |
| - switch.turn_off: relay_zone1 | |
| - switch.template.publish: | |
| id: zone1 | |
| state: OFF | |
| - platform: template | |
| name: "${display_name} Zone 2" | |
| id: zone2 | |
| lambda: |- | |
| if (id(relay_zone2).state) { | |
| return true; | |
| } else { | |
| return false; | |
| } | |
| turn_on_action: | |
| then: | |
| if: | |
| condition: | |
| - binary_sensor.is_off: rain | |
| - switch.is_off: master_disable | |
| then: | |
| - switch.turn_on: relay_zone2 | |
| - switch.template.publish: | |
| id: zone2 | |
| state: ON | |
| else: | |
| - switch.template.publish: | |
| id: zone2 | |
| state: OFF | |
| turn_off_action: | |
| - switch.turn_off: relay_zone2 | |
| - switch.template.publish: | |
| id: zone2 | |
| state: OFF | |
| - platform: template | |
| name: "${display_name} Zone 3" | |
| id: zone3 | |
| lambda: |- | |
| if (id(relay_zone3).state) { | |
| return true; | |
| } else { | |
| return false; | |
| } | |
| turn_on_action: | |
| then: | |
| if: | |
| condition: | |
| - binary_sensor.is_off: rain | |
| - switch.is_off: master_disable | |
| then: | |
| - switch.turn_on: relay_zone3 | |
| - switch.template.publish: | |
| id: zone3 | |
| state: ON | |
| else: | |
| - switch.template.publish: | |
| id: zone3 | |
| state: OFF | |
| turn_off_action: | |
| - switch.turn_off: relay_zone3 | |
| - switch.template.publish: | |
| id: zone3 | |
| state: OFF | |
| - platform: template | |
| name: "${display_name} Zone 4" | |
| id: zone4 | |
| lambda: |- | |
| if (id(relay_zone4).state) { | |
| return true; | |
| } else { | |
| return false; | |
| } | |
| turn_on_action: | |
| then: | |
| if: | |
| condition: | |
| - binary_sensor.is_off: rain | |
| - switch.is_off: master_disable | |
| then: | |
| - switch.turn_on: relay_zone4 | |
| - switch.template.publish: | |
| id: zone4 | |
| state: ON | |
| else: | |
| - switch.template.publish: | |
| id: zone4 | |
| state: OFF | |
| turn_off_action: | |
| - switch.turn_off: relay_zone4 | |
| - switch.template.publish: | |
| id: zone4 | |
| state: OFF | |
| - platform: template | |
| name: "${display_name} Zone 5" | |
| id: zone5 | |
| lambda: |- | |
| if (id(relay_zone5).state) { | |
| return true; | |
| } else { | |
| return false; | |
| } | |
| turn_on_action: | |
| then: | |
| if: | |
| condition: | |
| - binary_sensor.is_off: rain | |
| - switch.is_off: master_disable | |
| then: | |
| - switch.turn_on: relay_zone5 | |
| - switch.template.publish: | |
| id: zone5 | |
| state: ON | |
| else: | |
| - switch.template.publish: | |
| id: zone5 | |
| state: OFF | |
| turn_off_action: | |
| - switch.turn_off: relay_zone5 | |
| - switch.template.publish: | |
| id: zone5 | |
| state: OFF | |
| - platform: template | |
| name: "${display_name} Zone 6" | |
| id: zone6 | |
| lambda: |- | |
| if (id(relay_zone6).state) { | |
| return true; | |
| } else { | |
| return false; | |
| } | |
| turn_on_action: | |
| then: | |
| if: | |
| condition: | |
| - binary_sensor.is_off: rain | |
| - switch.is_off: master_disable | |
| then: | |
| - switch.turn_on: relay_zone6 | |
| - switch.template.publish: | |
| id: zone6 | |
| state: ON | |
| else: | |
| - switch.template.publish: | |
| id: zone6 | |
| state: OFF | |
| turn_off_action: | |
| - switch.turn_off: relay_zone6 | |
| - switch.template.publish: | |
| id: zone6 | |
| state: OFF | |
| - platform: template | |
| name: "${display_name} Zone 7" | |
| id: zone7 | |
| lambda: |- | |
| if (id(relay_zone7).state) { | |
| return true; | |
| } else { | |
| return false; | |
| } | |
| turn_on_action: | |
| then: | |
| if: | |
| condition: | |
| - binary_sensor.is_off: rain | |
| - switch.is_off: master_disable | |
| then: | |
| - switch.turn_on: relay_zone7 | |
| - switch.template.publish: | |
| id: zone7 | |
| state: ON | |
| else: | |
| - switch.template.publish: | |
| id: zone7 | |
| state: OFF | |
| turn_off_action: | |
| - switch.turn_off: relay_zone7 | |
| - switch.template.publish: | |
| id: zone7 | |
| state: OFF | |
| - platform: template | |
| name: "${display_name} Zone 8" | |
| id: zone8 | |
| lambda: |- | |
| if (id(relay_zone8).state) { | |
| return true; | |
| } else { | |
| return false; | |
| } | |
| turn_on_action: | |
| then: | |
| if: | |
| condition: | |
| - binary_sensor.is_off: rain | |
| - switch.is_off: master_disable | |
| then: | |
| - switch.turn_on: relay_zone8 | |
| - switch.template.publish: | |
| id: zone8 | |
| state: ON | |
| else: | |
| - switch.template.publish: | |
| id: zone8 | |
| state: OFF | |
| turn_off_action: | |
| - switch.turn_off: relay_zone8 | |
| - switch.template.publish: | |
| id: zone8 | |
| state: OFF | |
| sensor: | |
| - platform: pulse_counter | |
| pin: GPIO3 | |
| name: "${display_name} Water Consumption" | |
| id: water_counter | |
| update_interval: 10s | |
| filters: | |
| #- lambda: return (x / 3.78541 / 450.0); | |
| - multiply: 0.000587049 | |
| - or: | |
| - heartbeat: ${heartbeat} | |
| - delta: 0.01 | |
| unit_of_measurement: "G/min" | |
| accuracy_decimals: 2 | |
| - platform: total_daily_energy | |
| name: "Daily Sprinkler Water Usage" | |
| power_id: water_counter | |
| unit_of_measurement: G | |
| accuracy_decimals: 0 | |
| filters: | |
| - multiply: 60 | |
| - or: | |
| - heartbeat: ${heartbeat} | |
| - delta: 1 | |
| - platform: wifi_signal | |
| id: wifi_sig | |
| name: "${display_name} RSSI" | |
| unit_of_measurement: "dBm" | |
| update_interval: 60s | |
| filters: | |
| - median: | |
| window_size: 7 | |
| send_every: 5 | |
| send_first_at: 5 | |
| - or: | |
| - heartbeat: 300s | |
| - delta: 3 | |
i2c is just more resistant and I haven't had this issue using them.
Such as the PCF8574 or MCP23017.
Aaah right. So you intend to redesign the board or see if you can just replace the chip?
Oh yes and what is the value for 'timezone' to put in secrets as I am in New Zealand and am not sure what one would used here?
UTC+13:00
NZDT — New Zealand Daylight Time
@patrickdk77 Was hoping you would reply to my above comment. Hopefully you are well and can reply.
Thanks
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Could you explain for me: removing the shift register with an i2c gpio module
also: This has become better with soldering it
Thanks again for your work on this