Skip to content

Instantly share code, notes, and snippets.

@paulhayes

paulhayes/end.gcode

Last active November 8, 2020 17:40
Show Gist options
  • Save paulhayes/5cccf6269dede67ebe93a65580a3c27a to your computer and use it in GitHub Desktop.
Save paulhayes/5cccf6269dede67ebe93a65580a3c27a to your computer and use it in GitHub Desktop.
Download ZIP
FLSun QQ Gcode
Raw
end.gcode
;End G-Code
M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
M84 ;steppers off
G90 ;absolute positioning
M81
;{profile_string}
Raw
start.gcode
;Start G-Code
;Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
;M109 S{print_temperature} ;Uncomment to add your own temperature line
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F{travel_speed} ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E3 ;extrude 3mm of feed stock
G92 E0 ;zero the extruded length again
G1 F{travel_speed}
;Put printing message on LCD screen
M117 Printing...
@jhonathas
Copy link

This is configuration for FLSUN QQS?

@paulhayes
Copy link
Author

No, the older model FLSUN QQ.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment