drzzs_base_quin

gistfile1.txt

esphomeyaml:
  name: drzz_quin
  platform: ESP32
  board: mhetesp32devkit

wifi:
  ssid: '*********'
  password: '**********'

mqtt:
  broker: '192.168.x.x'
  username: '*****'
  password: '********'
  
# Enable logging
logger:
  # level: NONE

# optional web front end
web_server:
  port: 80

ota:
  password: '********'


dallas:
  - pin: GPIO18

switch:
  - platform: gpio
    name: "Q2_Onboard light"
    id: Q2_Onboard
    inverted: OFF
    pin: 2

output:
  - platform: ledc
    pin: 16
    frequency: 40000Hz
    bit_depth: 10
    id: LED_gpio_16

######  Uncomment the number of ports you'll use so they're not all autodiscovered ######

  # - platform: ledc
  #   pin: 17
  #   frequency: 40000Hz
  #   bit_depth: 10
  #   id: LED_gpio_17

  # - platform: ledc
  #   pin: 5
  #   frequency: 40000Hz
  #   bit_depth: 10
  #   id: LED_gpio_5

  # - platform: ledc
  #   pin: 19
  #   frequency: 40000Hz
  #   bit_depth: 10
  #   id: LED_gpio_19

light:
  - platform: monochromatic
    name: "Q2_LED light ouput1"
    default_transition_length: 2s
    id: light1
    output: LED_gpio_16


######  Uncomment the number of ports you'll use so they're not all autodiscovered ######

  # - platform: monochromatic
  #   name: "Q2_LED light ouput2"
  #   default_transition_length: 5s
  #   output: LED_gpio_17

  # - platform: monochromatic
  #   name: "Q2_LED light ouput3"
  #   default_transition_length: 5s
  #   output: LED_gpio_5

  # - platform: monochromatic
  #   name: "Q2_LED light ouput4"
  #   default_transition_length: 5s
  #   output: LED_gpio_19


#read 'Getting sensor ID's to learn how to get the address.  https://esphomelib.com/esphomeyaml/components/sensor/dallas.html . 
###
# sensor:
#   - platform: dallas
#     address: ****************
#     name: "Q2_tempsensor"


# uncomment to try the capacitive touch sensor
# esp32_touch:
#   setup_mode: False


## uncomment to connect a momentary button across pin 23 and ground in order to toggle the lights on/off
# binary_sensor:
  # - platform: gpio
  #   pin:
  #     number: 23
  #     mode: INPUT_PULLUP
  #     inverted: True
  #   name: button1
  #   on_click:
  #     min_length: 50ms
  #     max_length: 350ms
  #     then:
  #       - switch.toggle:
  #           id: Q2_Onboard
  #       - light.toggle:
  #           id: light1