gistfile1.txt

Booting Linux on physical CPU 0x0
Linux version 5.10.11 (runner@fv-az90-308) (arm-buildroot-linux-gnueabihf-gcc.br_real (Buildroot v1.80) 9.3.0, GNU ld (GNU Binutils) 2.34) #1 Wed Mar 31 12:39:58 UTC 2021
CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
Memory policy: Data cache writeback
Reserved memory: created CMA memory pool at 0x15800000, size 64 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Zone ranges:
  Normal   [mem 0x0000000000000000-0x0000000019bfffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000000019bfffff]
Initmem setup node 0 [mem 0x0000000000000000-0x0000000019bfffff]
On node 0 totalpages: 105472
  Normal zone: 927 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 105472 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists, mobility grouping on.  Total pages: 104545
Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:89:4A:6C vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyS0,115200 rootfstype=squashfs ro modules-load=dwc2,libcomposite quiet
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 343304K/421888K available (6299K kernel code, 591K rwdata, 936K rodata, 188K init, 475K bss, 13048K reserved, 65536K cma-reserved)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
random: get_random_bytes called from 0xc0743b14 with crng_init=0
sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
bcm2835: system timer (irq = 27)
Console: colour dummy device 80x30
printk: console [tty1] enabled
Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Disabling memory control group subsystem
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x8200 - 0x8238
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 1024 KiB pool for atomic coherent allocations
thermal_sys: Registered thermal governor 'step_wise'
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
bcm2835-mbox 2000b880.mailbox: mailbox enabled
raspberrypi-firmware soc:firmware: Attached to firmware from 2020-10-15T12:57:52, variant start_x
raspberrypi-firmware soc:firmware: Firmware hash is 7a06d62ff1c0c6bd72d4b9a91b6e38eaf68aeb70
bcm2835-dma 20007000.dma: DMA legacy API manager, dmachans=0x1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource timer
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
NET: Registered protocol family 1
hw perfevents: no irqs for PMU, sampling events not supported
hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
Initialise system trusted keyrings
workingset: timestamp_bits=14 max_order=17 bucket_order=3
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler mq-deadline registered
io scheduler kyber registered
bcm2708_fb soc:fb: FB found 1 display(s)
Console: switching to colour frame buffer device 90x30
bcm2708_fb soc:fb: Registered framebuffer for display 0, size 720x480
Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
bcm2835-aux-uart 20215040.serial: there is not valid maps for state default
bcm2835-rng 20104000.rng: hwrng registered
vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
usbcore: registered new interface driver smsc95xx
dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
dwc_otg: FIQ enabled
dwc_otg: NAK holdoff enabled
dwc_otg: FIQ split-transaction FSM enabled
Module dwc_common_port init
bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe
sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
Loading compiled-in X.509 certificates
uart-pl011 20201000.serial: cts_event_workaround enabled
20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
bcm2835-aux-uart 20215040.serial: there is not valid maps for state default
printk: console [ttyS0] disabled
20215040.serial: ttyS0 at MMIO 0x20215040 (irq = 53, base_baud = 50000000) is a 16550
printk: console [ttyS0] enabled
bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
mmc-bcm2835 20300000.mmcnr: DMA channel allocated
sdhost: log_buf @ (ptrval) (95910000)
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
of_cfs_init
of_cfs_init: OK
Waiting for root device /dev/mmcblk0p2...
random: fast init done
mmc0: host does not support reading read-only switch, assuming write-enable
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SC16G 14.8 GiB
 mmcblk0: p1 p2
VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
mmc1: new high speed SDIO card at address 0001
devtmpfs: mounted
Freeing unused kernel memory: 188K
Kernel memory protection not selected by kernel config.
Run /sbin/init as init process
  with arguments:
    /sbin/init
  with environment:
    HOME=/
    TERM=linux
    modules-load=dwc2,libcomposite
systemd[1]: System time before build time, advancing clock.
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 246 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm.
systemd[1]: Set hostname to <piwebcam>.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd[1]: /usr/lib/systemd/system/uvc-webcam.service:7: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/uvc-webcam.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/usb-gadget-config.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/usb-gadget-config.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice system-serial\x2dgetty.slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Condition check resulted in Huge Pages File System being skipped.
systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
systemd[1]: Mounting Temporary Directory (/tmp)...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Mounted Temporary Directory (/tmp).
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: var.mount: Directory /var to mount over is not empty, mounting anyway.
systemd[1]: Mounting /var...
systemd[1]: Mounted /var.
systemd[1]: Started Journal Service.
dwc2 20980000.usb: supply vusb_d not found, using dummy regulator
dwc2 20980000.usb: supply vusb_a not found, using dummy regulator
dwc2 20980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
dwc2 20980000.usb: DWC OTG Controller
dwc2 20980000.usb: new USB bus registered, assigned bus number 1
dwc2 20980000.usb: irq 33, io mem 0x20980000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
# dmesg 
Booting Linux on physical CPU 0x0
Linux version 5.10.11 (runner@fv-az90-308) (arm-buildroot-linux-gnueabihf-gcc.br_real (Buildroot v1.80) 9.3.0, GNU ld (GNU Binutils) 2.34) #1 Wed Mar 31 12:39:58 UTC 2021
CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
Memory policy: Data cache writeback
Reserved memory: created CMA memory pool at 0x15800000, size 64 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Zone ranges:
  Normal   [mem 0x0000000000000000-0x0000000019bfffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000000019bfffff]
Initmem setup node 0 [mem 0x0000000000000000-0x0000000019bfffff]
On node 0 totalpages: 105472
  Normal zone: 927 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 105472 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists, mobility grouping on.  Total pages: 104545
Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:89:4A:6C vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyS0,115200 rootfstype=squashfs ro modules-load=dwc2,libcomposite
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 343304K/421888K available (6299K kernel code, 591K rwdata, 936K rodata, 188K init, 475K bss, 13048K reserved, 65536K cma-reserved)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
random: get_random_bytes called from 0xc0743b14 with crng_init=0
sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
bcm2835: system timer (irq = 27)
Console: colour dummy device 80x30
printk: console [tty1] enabled
Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Disabling memory control group subsystem
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x8200 - 0x8238
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 1024 KiB pool for atomic coherent allocations
thermal_sys: Registered thermal governor 'step_wise'
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
bcm2835-mbox 2000b880.mailbox: mailbox enabled
raspberrypi-firmware soc:firmware: Attached to firmware from 2020-10-15T12:57:52, variant start_x
raspberrypi-firmware soc:firmware: Firmware hash is 7a06d62ff1c0c6bd72d4b9a91b6e38eaf68aeb70
bcm2835-dma 20007000.dma: DMA legacy API manager, dmachans=0x1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource timer
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
NET: Registered protocol family 1
hw perfevents: no irqs for PMU, sampling events not supported
hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
Initialise system trusted keyrings
workingset: timestamp_bits=14 max_order=17 bucket_order=3
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler mq-deadline registered
io scheduler kyber registered
bcm2708_fb soc:fb: FB found 1 display(s)
Console: switching to colour frame buffer device 240x67
bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
bcm2835-aux-uart 20215040.serial: there is not valid maps for state default
bcm2835-rng 20104000.rng: hwrng registered
vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
usbcore: registered new interface driver smsc95xx
dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
dwc_otg: FIQ enabled
dwc_otg: NAK holdoff enabled
dwc_otg: FIQ split-transaction FSM enabled
Module dwc_common_port init
bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe
sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
Loading compiled-in X.509 certificates
uart-pl011 20201000.serial: cts_event_workaround enabled
20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
bcm2835-aux-uart 20215040.serial: there is not valid maps for state default
printk: console [ttyS0] disabled
20215040.serial: ttyS0 at MMIO 0x20215040 (irq = 53, base_baud = 50000000) is a 16550
printk: console [ttyS0] enabled
bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
mmc-bcm2835 20300000.mmcnr: DMA channel allocated
sdhost: log_buf @ (ptrval) (95910000)
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
of_cfs_init
of_cfs_init: OK
Waiting for root device /dev/mmcblk0p2...
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
random: fast init done
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
mmc0: host does not support reading read-only switch, assuming write-enable
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SC16G 14.8 GiB
 mmcblk0: p1 p2
VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 188K
Kernel memory protection not selected by kernel config.
Run /sbin/init as init process
  with arguments:
    /sbin/init
  with environment:
    HOME=/
    TERM=linux
    modules-load=dwc2,libcomposite
mmc1: new high speed SDIO card at address 0001
systemd[1]: System time before build time, advancing clock.
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 246 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm.
systemd[1]: Set hostname to <piwebcam>.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd[1]: /usr/lib/systemd/system/uvc-webcam.service:7: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/uvc-webcam.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/usb-gadget-config.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/usb-gadget-config.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice system-serial\x2dgetty.slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Paths.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Condition check resulted in Huge Pages File System being skipped.
systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
systemd[1]: Mounting Temporary Directory (/tmp)...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Mounted Temporary Directory (/tmp).
systemd[1]: Started Journal Service.
dwc2 20980000.usb: supply vusb_d not found, using dummy regulator
dwc2 20980000.usb: supply vusb_a not found, using dummy regulator
dwc2 20980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
dwc2 20980000.usb: DWC OTG Controller
dwc2 20980000.usb: new USB bus registered, assigned bus number 1
dwc2 20980000.usb: irq 33, io mem 0x20980000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 5.10.11 dwc2_hsotg
usb usb1: SerialNumber: 20980000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
mc: Linux media interface: v0.10
bcm2835_vc_sm_cma_probe: Videocore shared memory driver
videodev: Linux video capture interface: v2.00
[vc_sm_connected_init]: start
[vc_sm_connected_init]: installed successfully
vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
cfg80211: Loading compiled-in X.509 certificates for regulatory database
bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
brcmfmac: F1 signature read @0x18000000=0x1541a9a6
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
usbcore: registered new interface driver brcmfmac
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.bin failed with error -2
bcm2835-codec bcm2835-codec: Device registered as /dev/video10
bcm2835-codec bcm2835-codec: Loaded V4L2 decode
bcm2835-codec bcm2835-codec: Device registered as /dev/video11
bcm2835-codec bcm2835-codec: Loaded V4L2 encode
bcm2835-codec bcm2835-codec: Device registered as /dev/video12
brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
bcm2835-codec bcm2835-codec: Loaded V4L2 isp
dwc2 20980000.usb: bound driver configfs-gadget
dwc2 20980000.usb: new device is high-speed
dwc2 20980000.usb: new device is high-speed
uart-pl011 20201000.serial: no DMA platform data
dwc2 20980000.usb: new device is high-speed
dwc2 20980000.usb: new address 22