0001-Increase-commonality-with-Pi3-dts.patch

From 40ad837c248c9a54ad39efb2e45bc16171963b9f Mon Sep 17 00:00:00 2001
From: Phil Elwell <[email protected]>
Date: Mon, 15 Aug 2016 11:03:41 +0100
Subject: [PATCH] Increase commonality with Pi3 dts

---
 arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 37 +++++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
index e578e68..6a3d2f2 100644
--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
@@ -40,6 +40,16 @@
 		brcm,function = <4>; /* alt0 */
 	};
 
+	uart0_pins: uart0_pins {
+		brcm,pins;
+		brcm,function;
+		brcm,pull = <0 2>;
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins;
+		brcm,function;
+	};
 };
 
 &mmc {
@@ -51,11 +61,23 @@
 	brcm,overclock-50 = <0>;
 };
 
+&soc {
+	virtgpio: virtgpio {
+		compatible = "brcm,bcm2835-virtgpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		firmware = <&firmware>;
+		status = "okay";
+	};
+};
+
 &fb {
 	status = "okay";
 };
 
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
 
@@ -107,16 +129,6 @@
 	status = "okay";
 };
 
-&soc {
-	virtgpio: virtgpio {
-		compatible = "brcm,bcm2835-virtgpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		firmware = <&firmware>;
-		status = "okay";
-	};
-};
-
 &leds {
 	act_led: act {
 		label = "led0";
@@ -129,6 +141,11 @@
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 };
 
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
 / {
 	__overrides__ {
 		uart0 = <&uart0>,"status";
-- 
1.9.1