3B+ bootlog on 4.19.1-v8+

dmesg_4.19.1-v8+.txt

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 4.19.1-v8+ (phil@buildbot) (gcc version 5.2.1 20151005 (crosstool-NG crosstool-ng-1.22.0-115-g785dbce - aarch64-linux-gnueabi)) #884 SMP PREEMPT Mon Nov 12 13:57:17 GMT 2018
[    0.000000] Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 8 MiB at 0x000000003ac00000
[    0.000000] On node 0 totalpages: 242688
[    0.000000]   DMA32 zone: 3792 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 242688 pages, LIFO batch:63
[    0.000000] random: get_random_bytes called from start_kernel+0xb8/0x47c with crng_init=0
[    0.000000] percpu: Embedded 24 pages/cpu @(____ptrval____) s57368 r8192 d32744 u98304
[    0.000000] pcpu-alloc: s57368 r8192 d32744 u98304 alloc=24*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 843419
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 238896
[    0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 dwc_otg.fiq_enable=1 console=ttyS0,115200 console=tty1 ip=dhcp root=/dev/nfs rootfstype=nfs nfsroot=10.3.14.8:/home/phil/pi/root,v3 rw elevator=deadline fsck.repair=yes rootwait loglevel=8
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Memory: 929264K/970752K available (7612K kernel code, 874K rwdata, 2360K rodata, 2752K init, 918K bss, 33296K reserved, 8192K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 26381 entries in 104 pages
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000275] Console: colour dummy device 80x25
[    0.001081] console [tty1] enabled
[    0.001154] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200)
[    0.001213] pid_max: default: 32768 minimum: 301
[    0.001640] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.001696] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.003031] Disabling memory control group subsystem
[    0.009153] ASID allocator initialised with 32768 entries
[    0.011149] rcu: Hierarchical SRCU implementation.
[    0.013688] EFI services will not be available.
[    0.016241] smp: Bringing up secondary CPUs ...
[    0.024500] Detected VIPT I-cache on CPU1
[    0.024570] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.032624] Detected VIPT I-cache on CPU2
[    0.032675] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.040768] Detected VIPT I-cache on CPU3
[    0.040814] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.041018] smp: Brought up 1 node, 4 CPUs
[    0.041174] SMP: Total of 4 processors activated.
[    0.041209] CPU features: detected: 32-bit EL0 Support
[    0.044086] CPU: All CPU(s) started at EL2
[    0.044161] alternatives: patching kernel code
[    0.045923] devtmpfs: initialized
[    0.061728] Enabled cp15_barrier support
[    0.061827] Enabled setend support
[    0.062404] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.062467] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.063220] pinctrl core: initialized pinctrl subsystem
[    0.063585] DMI not present or invalid.
[    0.064081] NET: Registered protocol family 16
[    0.070472] cpuidle: using governor menu
[    0.071125] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[    0.071172] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.076411] DMA: preallocated 256 KiB pool for atomic allocations
[    0.076611] Serial: AMBA PL011 UART driver
[    0.081212] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.124575] bcm2835-dma 3f007000.dma: DMA legacy API manager at (____ptrval____), dmachans=0x1
[    0.126984] SCSI subsystem initialized
[    0.127295] usbcore: registered new interface driver usbfs
[    0.127444] usbcore: registered new interface driver hub
[    0.127619] usbcore: registered new device driver usb
[    0.128427] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-09-21 15:43
[    0.131477] clocksource: Switched to clocksource arch_sys_counter
[    0.249517] VFS: Disk quotas dquot_6.6.0
[    0.249658] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.249906] FS-Cache: Loaded
[    0.250271] CacheFiles: Loaded
[    0.263820] NET: Registered protocol family 2
[    0.264860] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
[    0.264936] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.265106] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.265351] TCP: Hash tables configured (established 8192 bind 8192)
[    0.265687] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.265765] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.266114] NET: Registered protocol family 1
[    0.267115] RPC: Registered named UNIX socket transport module.
[    0.267152] RPC: Registered udp transport module.
[    0.267183] RPC: Registered tcp transport module.
[    0.267213] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.269866] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.272177] Initialise system trusted keyrings
[    0.272635] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.284993] FS-Cache: Netfs 'nfs' registered for caching
[    0.286141] NFS: Registering the id_resolver key type
[    0.286214] Key type id_resolver registered
[    0.286245] Key type id_legacy registered
[    0.290245] Key type asymmetric registered
[    0.290287] Asymmetric key parser 'x509' registered
[    0.290372] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.290715] io scheduler noop registered
[    0.290750] io scheduler deadline registered (default)
[    0.291003] io scheduler cfq registered
[    0.291037] io scheduler mq-deadline registered (default)
[    0.291071] io scheduler kyber registered
[    0.294976] BCM2708FB: allocated DMA memory fac40000
[    0.295051] BCM2708FB: allocated DMA channel 0 @ (____ptrval____)
[    0.346518] Console: switching to colour frame buffer device 228x61
[    0.378340] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.380897] bcm2835-rng 3f104000.rng: hwrng registered
[    0.381327] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.382591] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    0.383217] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.399997] brd: module loaded
[    0.416539] loop: module loaded
[    0.416695] Loading iSCSI transport class v2.0-870.
[    0.418160] libphy: Fixed MDIO Bus: probed
[    0.418449] usbcore: registered new interface driver lan78xx
[    0.418744] usbcore: registered new interface driver smsc95xx
[    0.418941] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.647837] Core Release: 2.80a
[    0.647954] Setting default values for core params
[    0.648127] Finished setting default values for core params
[    0.849571] Using Buffer DMA mode
[    0.849691] Periodic Transfer Interrupt Enhancement - disabled
[    0.849875] Multiprocessor Interrupt Enhancement - disabled
[    0.850053] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.850205] Dedicated Tx FIFOs mode
[    0.851285] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0x08199000 dma = 0xfac54000 len=9024
[    0.851631] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    0.852269] dwc_otg: Microframe scheduler enabled
[    0.852535] WARN::hcd_init_fiq:486: MPHI regs_base at 0x0803d000
[    0.852868] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.853089] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.853378] dwc_otg 3f980000.usb: irq 9, io mem 0x00000000
[    0.860164] Init: Port Power? op_state=1
[    0.866744] Init: Power Port (0)
[    0.873764] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.880631] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.887507] usb usb1: Product: DWC OTG Controller
[    0.894333] usb usb1: Manufacturer: Linux 4.19.1-v8+ dwc_otg_hcd
[    0.901072] usb usb1: SerialNumber: 3f980000.usb
[    0.908740] hub 1-0:1.0: USB hub found
[    0.915449] hub 1-0:1.0: 1 port detected
[    0.923079] dwc_otg: FIQ enabled
[    0.929643] dwc_otg: NAK holdoff enabled
[    0.936100] dwc_otg: FIQ split-transaction FSM enabled
[    0.942698] Module dwc_common_port init
[    0.950115] usbcore: registered new interface driver usb-storage
[    0.958148] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.965262] bcm2835-cpufreq: min=600000 max=1400000
[    0.972706] sdhci: Secure Digital Host Controller Interface driver
[    0.979421] sdhci: Copyright(c) Pierre Ossman
[    0.986663] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[    0.994084] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    1.001156] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
[    1.008161] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.017044] ledtrig-cpu: registered to indicate activity on CPUs
[    1.024331] hidraw: raw HID events driver (C) Jiri Kosina
[    1.031706] usbcore: registered new interface driver usbhid
[    1.038740] usbhid: USB HID core driver
[    1.046025] Initializing XFRM netlink socket
[    1.052887] NET: Registered protocol family 17
[    1.059838] Key type dns_resolver registered
[    1.067983] registered taskstats version 1
[    1.074687] Loading compiled-in X.509 certificates
[    1.094511] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    1.101522] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 66, base_baud = 0) is a PL011 rev2
[    1.111110] console [ttyS0] disabled
[    1.118055] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550
[    2.134341] console [ttyS0] enabled
[    2.145342] Indeed it is in host mode hprt0 = 00021501
[    2.159153] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    2.183487] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    2.250551] sdhost: log_buf @ (____ptrval____) (fac53000)
[    2.274713] random: fast init done
[    2.289237] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.303705] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.316348] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.331858] of_cfs_init
[    2.341354] of_cfs_init: OK
[    2.352024] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.368577] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.380985] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.398977] Indeed it is in host mode hprt0 = 00001101
[    2.434056] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.459651] mmc0: new high speed SDHC card at address 59b4
[    2.488255] mmcblk0: mmc0:59b4 NCard 30.0 GiB
[    2.515638] mmc1: new high speed SDIO card at address 0001
[    2.531064]  mmcblk0: p1 p2
[    2.640048] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[    2.655520] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.670805] hub 1-1:1.0: USB hub found
[    2.681813] hub 1-1:1.0: 4 ports detected
[    2.976538] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.078979] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[    3.094532] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.109713] hub 1-1.1:1.0: USB hub found
[    3.120846] hub 1-1.1:1.0: 3 ports detected
[    3.485426] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[    3.867038] random: crng init done
[    3.929540] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
[    4.032272] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[    4.048330] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.330608] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[    4.356170] libphy: lan78xx-mdiobus: probed
[    6.257530] Sending DHCP requests ., OK
[    7.390926] IP-Config: Got DHCP answer from 10.3.14.1, my address is 10.3.14.223
[    7.405932] IP-Config: Complete:
[    7.416607]      device=eth0, hwaddr=b8:27:eb:47:51:ef, ipaddr=10.3.14.223, mask=255.255.255.0, gw=10.3.14.1
[    7.434511]      host=10.3.14.223, domain=pitowers.org, nis-domain=(none)
[    7.449012]      bootserver=0.0.0.0, rootserver=10.3.14.8, rootpath=
[    7.449026]      nameserver0=10.3.14.1
[    7.485838] VFS: Mounted root (nfs filesystem) on device 0:15.
[    7.500198] devtmpfs: mounted
[    7.520107] Freeing unused kernel memory: 2752K
[    7.532395] Run /sbin/init as init process
[    8.830523] systemd[1]: System time before build time, advancing clock.
[    9.455990] NET: Registered protocol family 10
[    9.471293] Segment Routing with IPv6
[    9.761200] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    9.788926] systemd[1]: Detected architecture arm64.
[    9.834826] systemd[1]: Set hostname to <raspberrypi>.
[   10.691792] systemd[1]: dnsmasq.service: Cannot add dependency job, ignoring: Unit dnsmasq.service is masked.
[   10.897009] systemd[1]: Listening on udev Control Socket.
[   10.920834] systemd[1]: Reached target Swap.
[   10.944043] systemd[1]: Listening on Syslog Socket.
[   10.968439] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.997447] systemd[1]: Listening on udev Kernel Socket.
[   11.022675] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   11.278154] i2c /dev entries driver
[   12.122843] systemd-journald[126]: Received request to flush runtime journal from PID 1
[   14.425572] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   14.472210] vchiq: vchiq_init_state: slot_zero = 00000000f0adcb55, is_master = 0
[   14.750299] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[   14.777164] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[   15.481410] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   15.678581] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   15.776156] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   15.777715] usbcore: registered new interface driver brcmfmac
[   16.062251] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   16.097612] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[   16.584701] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   16.770245] uart-pl011 3f201000.serial: no DMA platform data
[   17.035775] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.035795] brcmfmac: power management disabled
[   22.652601] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.940074] fuse init (API version 7.27)
[   32.057988] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   47.203164] Bluetooth: Core ver 2.22
[   47.203261] NET: Registered protocol family 31
[   47.203267] Bluetooth: HCI device and connection manager initialized
[   47.203290] Bluetooth: HCI socket layer initialized
[   47.203303] Bluetooth: L2CAP socket layer initialized
[   47.203340] Bluetooth: SCO socket layer initialized