gistfile1.txt

[  314.954141] usb 3-3: new high-speed USB device number 6 using xhci_hcd
[  315.194677] qmi_wwan 3-3:1.4: cdc-wdm0: USB WDM device
[  315.210690] qmi_wwan 3-3:1.4 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-3, WWAN/QMI device, e2:b6:a9:66:78:fb
[  315.222505] usb-storage 3-3:1.5: USB Mass Storage device detected
[  315.230527] scsi host2: usb-storage 3-3:1.5
[  316.274970] scsi 2:0:0:0: Direct-Access              SD Storage       0000 PQ: 0 ANSI: 2
[  316.289713] scsi 2:0:0:1: CD-ROM                     Mass Storage     0000 PQ: 0 ANSI: 2
[  316.303764] sd 2:0:0:0: [sda] Unit Not Ready
[  316.310053] sd 2:0:0:0: [sda] Sense Key : 0x5 [current]
[  316.311444] sr 2:0:0:1: [sr0] scsi-1 drive
[  316.315387] sd 2:0:0:0: [sda] ASC=0x20 ASCQ=0x0
[  316.330201] sr 2:0:0:1: Attached scsi CD-ROM sr0
[  316.338785] sd 2:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=DRIVER_OK
[  316.349569] sd 2:0:0:0: [sda] Sense Key : 0x5 [current]
[  316.356665] sd 2:0:0:0: [sda] ASC=0x20 ASCQ=0x0
[  316.365475] sd 2:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[  316.373493] sd 2:0:0:0: [sda] 0-byte physical blocks
[  316.380883] sd 2:0:0:0: [sda] Write Protect is off
[  316.387465] sd 2:0:0:0: [sda] Mode Sense: 0f 00 00 00
[  316.388137] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  316.399029] sd 2:0:0:0: [sda] Attached SCSI removable disk
[  318.304603] usb 3-3: USB disconnect, device number 6
[  318.311143] qmi_wwan 3-3:1.4 wwan0: unregister 'qmi_wwan' usb-0000:00:14.0-3, WWAN/QMI device
[  318.532496] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  318.538907] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=DRIVER_OK
[  319.102210] usb 3-3: new full-speed USB device number 7 using xhci_hcd
[  319.402082] usb 3-3: new high-speed USB device number 8 using xhci_hcd
[  319.643061] usb-storage 3-3:1.2: USB Mass Storage device detected
[  319.651014] scsi host2: usb-storage 3-3:1.2
[  320.673024] scsi 2:0:0:0: Direct-Access              SD Storage       0000 PQ: 0 ANSI: 2
[  320.688321] sd 2:0:0:0: [sda] Unit Not Ready
[  320.694804] sd 2:0:0:0: [sda] Sense Key : 0x5 [current]
[  320.701914] sd 2:0:0:0: [sda] ASC=0x20 ASCQ=0x0
[  320.716878] sd 2:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=DRIVER_OK
[  320.727683] sd 2:0:0:0: [sda] Sense Key : 0x5 [current]
[  320.734790] sd 2:0:0:0: [sda] ASC=0x20 ASCQ=0x0
[  320.743804] sd 2:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[  320.751847] sd 2:0:0:0: [sda] 0-byte physical blocks
[  320.759328] sd 2:0:0:0: [sda] Write Protect is off
[  320.766064] sd 2:0:0:0: [sda] Mode Sense: 0f 00 00 00
[  320.766723] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  320.777708] sd 2:0:0:0: [sda] Attached SCSI removable disk
root@OpenWrt:~#