Created
February 17, 2020 21:43
-
-
Save phhusson/12edffe9084979953b53226f9bc0b132 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| / # cat /sys/fs/pstore/console-ramoops-0 | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] | |
| [ 0.000000] Linux version 5.6.0-rc1-00344-g713db3560410-dirty (phh@phh-desktop) (gcc version 8.3.0 (Debian 8.3.0-2)) #7 SMP PREEMPT Sun Feb 16 21:30:05 CET 2020 | |
| [ 0.000000] Machine model: Qualcomm Technologies, Inc. MSM 8998 V2 SKUK T5 | |
| [ 0.000000] efi: Getting EFI parameters from FDT: | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 | |
| [ 0.000000] OF: fdt: earlycon: stdout-path serial0 not found | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017e3bffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0x17dbfb100-0x17dbfcfff] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff] | |
| [ 0.000000] DMA32 [mem 0x00000000c0000000-0x00000000ffffffff] | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000017e3bffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff] | |
| [ 0.000000] node 0: [mem 0x0000000085f00000-0x0000000085ffffff] | |
| [ 0.000000] node 0: [mem 0x0000000089100000-0x000000008aafffff] | |
| [ 0.000000] node 0: [mem 0x0000000095215000-0x00000000955fffff] | |
| [ 0.000000] node 0: [mem 0x0000000095800000-0x000000017e3bffff] | |
| [ 0.000000] Zeroed struct page in unavailable ranges: 320 pages | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017e3bffff] | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.0 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.0 | |
| [ 0.000000] psci: OSI mode supported. | |
| [ 0.000000] percpu: Embedded 23 pages/cpu s53720 r8192 d32296 u94208 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR | |
| [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) | |
| [ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 968352 | |
| [ 0.000000] Policy zone: Normal | |
| [ 0.000000] Kernel command line: earlycon androidboot.hardware=qcom earlycon androidboot.verifiedbootstate=orange androidboot.keymaster=1 root=PARTUUID=296c1cc4-3988-386a-9563-eb1821dfe3a6 androidboot.bootdevice=1da4000.ufshc androidboot.serialno=530e1917 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_sw43404_boe_fhd_amoled_video:1:none:cfg:single_dsi androidboot.slot_suffix=_a skip_initramfs rootwait ro init=/init | |
| [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB) | |
| [ 0.000000] Memory: 3721244K/3934892K available (15036K kernel code, 2132K rwdata, 8216K rodata, 5568K init, 488K bss, 180880K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. | |
| [ 0.000000] Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: 608 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] GICv3: Distributor has no Range Selector support | |
| [ 0.000000] GICv3: 16 PPIs implemented | |
| [ 0.000000] GICv3: no VLPI support, no direct LPI support, no RVPEID support | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017b00000 | |
| [ 0.000000] ITS: No ITS available, not enabling LPIs | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x51c/0x6ac with crng_init=0 | |
| [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns | |
| [ 0.000002] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns | |
| [ 0.000127] Console: colour dummy device 80x25 | |
| [ 0.000542] printk: console [tty0] enabled | |
| [ 0.000612] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) | |
| [ 0.000629] pid_max: default: 32768 minimum: 301 | |
| [ 0.000699] LSM: Security Framework initializing | |
| [ 0.000756] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.000777] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.023424] ASID allocator initialised with 65536 entries | |
| [ 0.031416] rcu: Hierarchical SRCU implementation. | |
| [ 0.041607] EFI services will not be available. | |
| [ 0.047440] smp: Bringing up secondary CPUs ... | |
| [ 0.080838] Detected VIPT I-cache on CPU1 | |
| [ 0.080867] GICv3: CPU1: found redistributor 1 region 0:0x0000000017b20000 | |
| [ 0.080914] CPU1: Booted secondary processor 0x0000000001 [0x51af8014] | |
| [ 0.112725] Detected VIPT I-cache on CPU2 | |
| [ 0.112746] GICv3: CPU2: found redistributor 2 region 0:0x0000000017b40000 | |
| [ 0.112784] CPU2: Booted secondary processor 0x0000000002 [0x51af8014] | |
| [ 0.144763] Detected VIPT I-cache on CPU3 | |
| [ 0.144786] GICv3: CPU3: found redistributor 3 region 0:0x0000000017b60000 | |
| [ 0.144823] CPU3: Booted secondary processor 0x0000000003 [0x51af8014] | |
| [ 0.177155] Detected VIPT I-cache on CPU4 | |
| [ 0.177219] GICv3: CPU4: found redistributor 100 region 0:0x0000000017b80000 | |
| [ 0.177294] CPU4: Booted secondary processor 0x0000000100 [0x51af8001] | |
| [ 0.209018] Detected VIPT I-cache on CPU5 | |
| [ 0.209079] GICv3: CPU5: found redistributor 101 region 0:0x0000000017ba0000 | |
| [ 0.209148] CPU5: Booted secondary processor 0x0000000101 [0x51af8001] | |
| [ 0.241079] Detected VIPT I-cache on CPU6 | |
| [ 0.241143] GICv3: CPU6: found redistributor 102 region 0:0x0000000017bc0000 | |
| [ 0.241214] CPU6: Booted secondary processor 0x0000000102 [0x51af8001] | |
| [ 0.273141] Detected VIPT I-cache on CPU7 | |
| [ 0.273209] GICv3: CPU7: found redistributor 103 region 0:0x0000000017be0000 | |
| [ 0.273280] CPU7: Booted secondary processor 0x0000000103 [0x51af8001] | |
| [ 0.273449] smp: Brought up 1 node, 8 CPUs | |
| [ 0.273588] SMP: Total of 8 processors activated. | |
| [ 0.273597] CPU features: detected: 32-bit EL0 Support | |
| [ 0.273606] CPU features: detected: CRC32 instructions | |
| [ 0.284916] CPU: All CPU(s) started at EL1 | |
| [ 0.284969] alternatives: patching kernel code | |
| [ 0.286618] devtmpfs: initialized | |
| [ 0.292117] KASLR enabled | |
| [ 0.292434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.292456] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) | |
| [ 0.293310] pinctrl core: initialized pinctrl subsystem | |
| [ 0.294365] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.294367] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.295560] DMI not present or invalid. | |
| [ 0.296008] NET: Registered protocol family 16 | |
| [ 0.297266] DMA: preallocated 256 KiB pool for atomic allocations | |
| [ 0.297281] audit: initializing netlink subsys (disabled) | |
| [ 0.297436] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.298360] cpuidle: using governor menu | |
| [ 0.298809] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.302023] Serial: AMBA PL011 UART driver | |
| [ 0.304968] printk: console [pstore-1] enabled | |
| [ 0.305282] pstore: Registered ramoops as persistent store backend | |
| [ 0.305321] ramoops: using 0x200000@0xac000000, ecc: 0 | |
| [ 0.365982] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.366008] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.366019] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.366030] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.368487] cryptd: max_cpu_qlen set to 1000 | |
| [ 0.372768] ACPI: Interpreter disabled. | |
| [ 0.375586] iommu: Default domain type: Translated | |
| [ 0.375909] vgaarb: loaded | |
| [ 0.376615] SCSI subsystem initialized | |
| [ 0.377075] usbcore: registered new interface driver usbfs | |
| [ 0.377123] usbcore: registered new interface driver hub | |
| [ 0.377186] usbcore: registered new device driver usb | |
| [ 0.377605] mc: Linux media interface: v0.10 | |
| [ 0.377629] videodev: Linux video capture interface: v2.00 | |
| [ 0.377660] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.377669] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.377689] PTP clock support registered | |
| [ 0.377761] EDAC MC: Ver: 3.0.0 | |
| [ 0.378297] qcom_scm: convention: smc arm 64 | |
| [ 0.378977] FPGA manager framework | |
| [ 0.379039] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.380761] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.381134] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.381267] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.381869] pnp: PnP ACPI: disabled | |
| [ 0.391441] s1: supplied by vph_pwr | |
| [ 0.391608] s2: supplied by vph_pwr | |
| [ 0.391613] NET: Registered protocol family 2 | |
| [ 0.391724] s3: supplied by vph_pwr | |
| [ 0.391752] s3: Bringing 0uV into 1352000-1352000uV | |
| [ 0.391849] s4: supplied by vph_pwr | |
| [ 0.391874] s4: Bringing 0uV into 1800000-1800000uV | |
| [ 0.391967] s5: supplied by vph_pwr | |
| [ 0.392005] s5: Bringing 0uV into 1904000-1904000uV | |
| [ 0.392112] s6: supplied by vph_pwr | |
| [ 0.392204] s7: supplied by vph_pwr | |
| [ 0.392229] s7: Bringing 0uV into 900000-900000uV | |
| [ 0.392330] s8: supplied by vph_pwr | |
| [ 0.392352] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) | |
| [ 0.392447] s9: supplied by vph_pwr | |
| [ 0.392522] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.392559] s10: supplied by vph_pwr | |
| [ 0.392679] s11: supplied by vph_pwr | |
| [ 0.392819] s12: supplied by vph_pwr | |
| [ 0.392920] s13: supplied by vph_pwr | |
| [ 0.393021] l1: supplied by s7 | |
| [ 0.393058] l1: Bringing 0uV into 880000-880000uV | |
| [ 0.393108] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) | |
| [ 0.393154] l2: supplied by s3 | |
| [ 0.393194] l2: Bringing 0uV into 1200000-1200000uV | |
| [ 0.393291] l3: supplied by s7 | |
| [ 0.393315] l3: Bringing 0uV into 1000000-1000000uV | |
| [ 0.393412] l4: supplied by s7 | |
| [ 0.393528] l5: supplied by s7 | |
| [ 0.393557] l5: Bringing 0uV into 800000-800000uV | |
| [ 0.393654] l6: supplied by s5 | |
| [ 0.393679] l6: Bringing 0uV into 1808000-1808000uV | |
| [ 0.393780] l7: supplied by s5 | |
| [ 0.393805] l7: Bringing 0uV into 1800000-1800000uV | |
| [ 0.393916] l8: supplied by s3 | |
| [ 0.393941] l8: Bringing 0uV into 1200000-1200000uV | |
| [ 0.394048] l9: Bringing 0uV into 1808000-1808000uV | |
| [ 0.394140] TCP: Hash tables configured (established 32768 bind 32768) | |
| [ 0.394167] l10: Bringing 0uV into 1808000-1808000uV | |
| [ 0.394295] l11: supplied by s7 | |
| [ 0.394320] l11: Bringing 0uV into 1000000-1000000uV | |
| [ 0.394406] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.394445] l12: supplied by s5 | |
| [ 0.394480] l12: Bringing 0uV into 1800000-1800000uV | |
| [ 0.394601] l13: Bringing 0uV into 1808000-1808000uV | |
| [ 0.394650] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.394721] l14: supplied by s5 | |
| [ 0.394760] l14: Bringing 0uV into 1880000-1880000uV | |
| [ 0.394879] l15: supplied by s5 | |
| [ 0.394920] l15: Bringing 0uV into 1800000-1800000uV | |
| [ 0.395045] l16: Bringing 0uV into 2704000-2704000uV | |
| [ 0.395096] NET: Registered protocol family 1 | |
| [ 0.395181] l17: supplied by s3 | |
| [ 0.395216] l17: Bringing 0uV into 1304000-1304000uV | |
| [ 0.395346] l18: Bringing 0uV into 2704000-2704000uV | |
| [ 0.395494] l19: Bringing 0uV into 3008000-3008000uV | |
| [ 0.395646] l20: Bringing 0uV into 2960000-2960000uV | |
| [ 0.395786] RPC: Registered named UNIX socket transport module. | |
| [ 0.395826] l21: Bringing 0uV into 2960000-2960000uV | |
| [ 0.395830] RPC: Registered udp transport module. | |
| [ 0.395836] RPC: Registered tcp transport module. | |
| [ 0.395902] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.396009] l22: Bringing 0uV into 2864000-2864000uV | |
| [ 0.396198] l23: Bringing 0uV into 3312000-3312000uV | |
| [ 0.396417] l24: Bringing 0uV into 3088000-3088000uV | |
| [ 0.396622] PCI: CLS 0 bytes, default 64 | |
| [ 0.396625] l25: Bringing 0uV into 3104000-3104000uV | |
| [ 0.396841] l26: supplied by s3 | |
| [ 0.396877] l26: Bringing 0uV into 1200000-1200000uV | |
| [ 0.396988] Unpacking initramfs... | |
| [ 0.397079] l27: supplied by s7 | |
| [ 0.397297] l28: Bringing 0uV into 3008000-3008000uV | |
| [ 0.397507] lvs1: supplied by s4 | |
| [ 0.397724] lvs2: supplied by s4 | |
| [ 0.398225] bob: supplied by vph_pwr | |
| [ 0.398252] bob: Bringing 0uV into 3312000-3312000uV | |
| [ 0.485042] Freeing initrd memory: 984K | |
| [ 0.486846] kvm [1]: HYP mode not available | |
| [ 0.500198] Initialise system trusted keyrings | |
| [ 0.500447] workingset: timestamp_bits=44 max_order=20 bucket_order=0 | |
| [ 0.512647] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.513988] NFS: Registering the id_resolver key type | |
| [ 0.514051] Key type id_resolver registered | |
| [ 0.514080] Key type id_legacy registered | |
| [ 0.514121] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.514520] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.547695] Key type asymmetric registered | |
| [ 0.547731] Asymmetric key parser 'x509' registered | |
| [ 0.547804] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241) | |
| [ 0.547844] io scheduler mq-deadline registered | |
| [ 0.547872] io scheduler kyber registered | |
| [ 0.556362] qcom-qmp-phy 1c06000.phy: Registered Qcom-QMP phy | |
| [ 0.557132] qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy | |
| [ 0.558037] qcom-qmp-phy c010000.phy: Registered Qcom-QMP phy | |
| [ 0.558694] l24: supplied by bob | |
| [ 0.569348] qcom-pcie 1c00000.pci: 1c00000.pci supply vdda not found, using dummy regulator | |
| [ 0.569530] qcom-pcie 1c00000.pci: 1c00000.pci supply vddpe-3v3 not found, using dummy regulator | |
| [ 0.580544] qcom-qmp-phy 1c06000.phy: phy initialization timed-out | |
| [ 0.580975] phy phy-1c06000.phy.0: phy init failed --> -110 | |
| [ 0.581808] qcom-pcie: probe of 1c00000.pci failed with error -110 | |
| [ 0.583817] EINJ: ACPI disabled. | |
| [ 0.587287] bam-dma-engine c144000.dma: WARN: Device release is not defined so it is not safe to unbind this driver while in use | |
| [ 0.596005] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.597434] SuperH (H)SCI(F) driver initialized | |
| [ 0.597891] msm_serial c171000.serial: msm_serial: detected port #0 | |
| [ 0.597919] msm_serial c171000.serial: uartclk = 19200000 | |
| [ 0.597955] c171000.serial: ttyMSM0 at MMIO 0xc171000 (irq = 41, base_baud = 1200000) is a MSM | |
| [ 0.598057] serial serial0: tty port ttyMSM0 registered | |
| [ 0.598107] msm_serial: driver initialized | |
| [ 0.598850] arm-smmu 1680000.iommu: probing hardware configuration... | |
| [ 0.598863] arm-smmu 1680000.iommu: SMMUv2 with: | |
| [ 0.598891] arm-smmu 1680000.iommu: stage 1 translation | |
| [ 0.598902] arm-smmu 1680000.iommu: address translation ops | |
| [ 0.598912] arm-smmu 1680000.iommu: non-coherent table walk | |
| [ 0.598922] arm-smmu 1680000.iommu: (IDR0.CTTW overridden by FW configuration) | |
| [ 0.598935] arm-smmu 1680000.iommu: stream matching with 16 register groups | |
| [ 0.598966] arm-smmu 1680000.iommu: 6 context banks (0 stage-2 only) | |
| [ 0.598988] arm-smmu 1680000.iommu: Supported page sizes: 0x63315000 | |
| [ 0.598999] arm-smmu 1680000.iommu: Stage-1: 36-bit VA -> 36-bit IPA | |
| [ 0.600005] arm-smmu 16c0000.iommu: probing hardware configuration... | |
| [ 0.600017] arm-smmu 16c0000.iommu: SMMUv2 with: | |
| [ 0.600037] arm-smmu 16c0000.iommu: stage 1 translation | |
| [ 0.600047] arm-smmu 16c0000.iommu: address translation ops | |
| [ 0.600057] arm-smmu 16c0000.iommu: non-coherent table walk | |
| [ 0.600067] arm-smmu 16c0000.iommu: (IDR0.CTTW overridden by FW configuration) | |
| [ 0.600080] arm-smmu 16c0000.iommu: stream matching with 14 register groups | |
| [ 0.600109] arm-smmu 16c0000.iommu: 10 context banks (0 stage-2 only) | |
| [ 0.600128] arm-smmu 16c0000.iommu: Supported page sizes: 0x63315000 | |
| [ 0.600140] arm-smmu 16c0000.iommu: Stage-1: 36-bit VA -> 36-bit IPA | |
| [ 0.608862] loop: module loaded | |
| [ 0.610046] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled | |
| [ 0.610364] l20: supplied by bob | |
| [ 0.611653] scsi host0: ufshcd | |
| [ 0.620931] spmi spmi-0: PMIC arbiter version v3 (0x30000000) | |
| [ 0.627763] gpio gpiochip2: (800f000.spmi:pmic@2:gpios@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver. | |
| [ 0.628693] gpio gpiochip3: (800f000.spmi:pmic@4:gpios@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver. | |
| [ 0.629308] s1: supplied by vph_pwr | |
| [ 0.630131] l9: supplied by bob | |
| [ 0.630171] l10: supplied by bob | |
| [ 0.630220] l13: supplied by bob | |
| [ 0.630256] l16: supplied by bob | |
| [ 0.630295] l18: supplied by bob | |
| [ 0.630330] l19: supplied by bob | |
| [ 0.630365] l21: supplied by bob | |
| [ 0.630402] l22: supplied by bob | |
| [ 0.630454] l23: supplied by bob | |
| [ 0.630490] l25: supplied by bob | |
| [ 0.630525] l28: supplied by bob | |
| [ 0.630599] s2: supplied by regulator-dummy | |
| [ 0.630745] s3: supplied by regulator-dummy | |
| [ 0.630898] s4: supplied by regulator-dummy | |
| [ 0.631144] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. | |
| [ 0.631157] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved. | |
| [ 0.631886] libphy: Fixed MDIO Bus: probed | |
| [ 0.632066] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.632594] thunder_xcv, ver 1.0 | |
| [ 0.632623] thunder_bgx, ver 1.0 | |
| [ 0.632651] nicpf, ver 1.0 | |
| [ 0.633071] hclge is initializing | |
| [ 0.633256] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version | |
| [ 0.633269] hns3: Copyright (c) 2017 Huawei Corporation. | |
| [ 0.633309] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
| [ 0.633318] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 0.633352] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k | |
| [ 0.633362] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 0.633392] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k | |
| [ 0.633403] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 0.633629] sky2: driver version 1.30 | |
| [ 0.634231] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.636259] dwc3-qcom a8f8800.usb: IRQ dp_hs_phy_irq not found | |
| [ 0.636273] dwc3-qcom a8f8800.usb: IRQ dm_hs_phy_irq not found | |
| [ 0.637184] dwc3 a800000.dwc3: Failed to get clk 'ref': -2 | |
| [ 0.637776] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 | |
| [ 0.637917] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 0.637929] ehci-pci: EHCI PCI platform driver | |
| [ 0.637959] ehci-platform: EHCI generic platform driver | |
| [ 0.638050] ehci-orion: EHCI orion driver | |
| [ 0.638121] ehci-exynos: EHCI Exynos driver | |
| [ 0.638183] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 0.638208] ohci-pci: OHCI PCI platform driver | |
| [ 0.638236] ohci-platform: OHCI generic platform driver | |
| [ 0.638317] ohci-exynos: OHCI Exynos driver | |
| [ 0.638651] usbcore: registered new interface driver usb-storage | |
| [ 0.639672] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers | |
| [ 0.640725] rtc-pm8xxx 800f000.spmi:pmic@0:rtc@6000: registered as rtc0 | |
| [ 0.641186] i2c /dev entries driver | |
| [ 0.644056] input: pm8941_pwrkey as /devices/platform/soc/800f000.spmi/spmi-0/0-00/800f000.spmi:pmic@0:pon@800/800f000.spmi:pmic@0:pon@800:pwrkey/input/input0 | |
| [ 0.648984] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.648999] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.649274] Synopsys Designware Multimedia Card Interface Driver | |
| [ 0.649896] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.650865] sdhci_msm c0a4900.sdhci: Got CD GPIO | |
| [ 0.683930] mmc0: SDHCI controller on c0a4900.sdhci [c0a4900.sdhci] using ADMA 64-bit | |
| [ 0.684468] leds-gpio leds: Led (null) renamed to :power_1 due to name collision | |
| [ 0.684538] leds-gpio leds: Led (null) renamed to :power_2 due to name collision | |
| [ 0.685996] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.689753] usbcore: registered new interface driver usbhid | |
| [ 0.689790] usbhid: USB HID core driver | |
| [ 0.689817] exFAT: Version 1.3.0 | |
| [ 0.692799] qcom-q6v5-mss 4080000.remoteproc: Failed to get xo clock | |
| [ 0.692844] qcom-q6v5-mss 4080000.remoteproc: Failed to get proxy clocks. | |
| [ 0.692884] remoteproc remoteproc0: releasing 4080000.remoteproc | |
| [ 0.692988] qcom-q6v5-mss: probe of 4080000.remoteproc failed with error -2 | |
| [ 0.702403] NET: Registered protocol family 10 | |
| [ 0.707105] Segment Routing with IPv6 | |
| [ 0.707147] NET: Registered protocol family 17 | |
| [ 0.707319] 9pnet: Installing 9P2000 support | |
| [ 0.707358] Key type dns_resolver registered | |
| [ 0.708373] registered taskstats version 1 | |
| [ 0.708385] Loading compiled-in X.509 certificates | |
| [ 0.717686] qcom-qusb2-phy c012000.phy: Registered Qcom-QUSB2 phy | |
| [ 0.718478] dwc3 a800000.dwc3: Failed to get clk 'ref': -2 | |
| [ 0.721377] OF: graph: no port node found in /soc/phy@c012000 | |
| [ 0.723307] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 0.723335] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 | |
| [ 0.723497] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000002010010 | |
| [ 0.723524] xhci-hcd xhci-hcd.1.auto: irq 45, io mem 0x0a800000 | |
| [ 0.724196] hub 1-0:1.0: USB hub found | |
| [ 0.724223] hub 1-0:1.0: 1 port detected | |
| [ 0.724411] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 0.724428] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 | |
| [ 0.724445] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed | |
| [ 0.724490] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 0.724895] hub 2-0:1.0: USB hub found | |
| [ 0.724918] hub 2-0:1.0: 1 port detected | |
| [ 0.727583] rtc-pm8xxx 800f000.spmi:pmic@0:rtc@6000: setting system clock to 1970-03-08T23:35:01 UTC (5787301) | |
| [ 0.727920] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 0.732012] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2 | |
| [ 0.732677] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6 | |
| [ 0.733485] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6 | |
| [ 0.733996] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 0.734088] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6 | |
| [ 0.734119] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
| [ 0.734135] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db | |
| [ 0.734585] ------------[ cut here ]------------ | |
| [ 0.734595] gcc_gpu_bimc_gfx_clk status stuck at 'on' | |
| [ 0.734632] WARNING: CPU: 3 PID: 1 at drivers/clk/qcom/clk-branch.c:92 clk_branch_toggle+0x15c/0x178 | |
| [ 0.734652] Modules linked in: | |
| [ 0.734664] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc1-00344-g713db3560410-dirty #7 | |
| [ 0.734676] Hardware name: Qualcomm Technologies, Inc. MSM 8998 V2 SKUK T5 (DT) | |
| [ 0.734690] pstate: 60000085 (nZCv daIf -PAN -UAO) | |
| [ 0.734700] pc : clk_branch_toggle+0x15c/0x178 | |
| [ 0.734711] lr : clk_branch_toggle+0x15c/0x178 | |
| [ 0.734719] sp : ffff80001005bd00 | |
| [ 0.734727] x29: ffff80001005bd00 x28: 0000000000000000 | |
| [ 0.734737] x27: ffffca984cf4044c x26: ffffca984d004968 | |
| [ 0.734748] x25: ffffca984cd4a0c8 x24: 0000000000000000 | |
| [ 0.734759] x23: ffffca984be1f570 x22: 0000000000000000 | |
| [ 0.734770] x21: ffffca984d59e8d0 x20: ffffca984d4b9908 | |
| [ 0.734780] x19: 0000000000000000 x18: 0000000000000010 | |
| [ 0.734791] x17: 00000000a3ae10ad x16: 000000008fe07e6d | |
| [ 0.734803] x15: ffffffffffffffff x14: 0720072007200720 | |
| [ 0.734814] x13: 0720072007200720 x12: 0720072007200720 | |
| [ 0.734825] x11: 0720072007200720 x10: 0720072007200720 | |
| [ 0.734836] x9 : ffff80001005bd00 x8 : 6e6f27207461206b | |
| [ 0.734848] x7 : 6375747320737574 x6 : ffffca984d6d56f9 | |
| [ 0.734858] x5 : 0000000000000000 x4 : 0000000000000000 | |
| [ 0.734868] x3 : 00000000ffffffff x2 : ffff3568b0ae9000 | |
| [ 0.734879] x1 : f36f7894bb582100 x0 : 0000000000000000 | |
| [ 0.734889] Call trace: | |
| [ 0.734898] clk_branch_toggle+0x15c/0x178 | |
| [ 0.734908] clk_branch2_disable+0x18/0x20 | |
| [ 0.734927] clk_disable_unused_subtree+0xac/0xe4 | |
| [ 0.734937] clk_disable_unused+0x50/0xd0 | |
| [ 0.734948] do_one_initcall+0x74/0x1a8 | |
| [ 0.734958] kernel_init_freeable+0x1cc/0x23c | |
| [ 0.734969] kernel_init+0x10/0x100 | |
| [ 0.734978] ret_from_fork+0x10/0x18 | |
| [ 0.734986] ---[ end trace 440843e508dd4c9a ]--- | |
| [ 0.735047] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP | |
| [ 0.735059] Modules linked in: | |
| [ 0.735072] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-rc1-00344-g713db3560410-dirty #7 | |
| [ 0.735084] Hardware name: Qualcomm Technologies, Inc. MSM 8998 V2 SKUK T5 (DT) | |
| [ 0.735097] pstate: 20000085 (nzCv daIf -PAN -UAO) | |
| [ 0.735109] pc : regmap_mmio_read32le+0x8/0x20 | |
| [ 0.735120] lr : regmap_mmio_read+0x2c/0x68 | |
| [ 0.735127] sp : ffff80001005bc20 | |
| [ 0.735134] x29: ffff80001005bc20 x28: 0000000000000000 | |
| [ 0.735145] x27: ffffca984cf4044c x26: ffffca984d004968 | |
| [ 0.735155] x25: ffffca984cf2d520 x24: ffff0000fd00b400 | |
| [ 0.735165] x23: 0000000000000000 x22: ffff80001005bce4 | |
| [ 0.735176] x21: ffff0000f8248000 x20: ffff80001005bce4 | |
| [ 0.735187] x19: ffff0000f8b34680 x18: 0000000000000010 | |
| [ 0.735198] x17: 00000000a3ae10ad x16: 000000008fe07e6d | |
| [ 0.735209] x15: ffffffffffffffff x14: 0720072007200720 | |
| [ 0.735220] x13: 0720072007200720 x12: 0720072007200720 | |
| [ 0.735231] x11: 0720072007200720 x10: 0720072007200720 | |
| [ 0.735241] x9 : ffff80001005bd00 x8 : 6e6f27207461206b | |
| [ 0.735251] x7 : 6375747320737574 x6 : 0000000000000000 | |
| [ 0.735261] x5 : 0000000000000000 x4 : 0000000000000000 | |
| [ 0.735271] x3 : ffffca984c002500 x2 : ffffca984c0029b8 | |
| [ 0.735281] x1 : 0000000000000000 x0 : ffff800010cf0000 | |
| [ 0.735291] Call trace: | |
| [ 0.735300] regmap_mmio_read32le+0x8/0x20 | |
| [ 0.735311] _regmap_bus_reg_read+0x14/0x20 | |
| [ 0.735321] _regmap_read+0x60/0xe0 | |
| [ 0.735330] regmap_read+0x48/0x70 | |
| [ 0.735339] clk_alpha_pll_is_enabled+0x30/0x60 | |
| [ 0.735350] clk_core_is_enabled+0x2c/0xd0 | |
| [ 0.735360] clk_disable_unused_subtree+0x88/0xe4 | |
| [ 0.735370] clk_disable_unused_subtree+0x3c/0xe4 | |
| [ 0.735380] clk_disable_unused_subtree+0x3c/0xe4 | |
| [ 0.735390] clk_disable_unused_subtree+0x3c/0xe4 | |
| [ 0.735399] clk_disable_unused+0x50/0xd0 | |
| [ 0.735408] do_one_initcall+0x74/0x1a8 | |
| [ 0.735417] kernel_init_freeable+0x1cc/0x23c | |
| [ 0.735426] kernel_init+0x10/0x100 | |
| [ 0.735435] ret_from_fork+0x10/0x18 | |
| [ 0.735447] Code: d65f03c0 d503201f f9400000 8b214000 (b9400000) | |
| [ 0.735464] ---[ end trace 440843e508dd4c9b ]--- |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment