0001-ufw-Initial-firewall-config-on-OpenVZ-VPS.patch

From eccc80a754273641c2e0532be98987c8e89e960e Mon Sep 17 00:00:00 2001
From: root <[email protected]>
Date: Fri, 28 Jun 2013 20:38:12 +0400
Subject: [PATCH] ufw: Initial firewall config on OpenVZ VPS

* OpenVZ vps doesn't have all the kernel features needed by
  Ubuntu 12.04 LTS, disable unsupported features so firewall
  starts cleanly.
---
 default/ufw      |    4 ++--
 ufw/after.rules  |    2 +-
 ufw/before.rules |   16 ++++++++++------
 ufw/ufw.conf     |    2 +-
 5 files changed, 15 insertions(+), 11 deletions(-)

diff --git a/default/ufw b/default/ufw
index bbe4842..728e682 100644
--- a/default/ufw
+++ b/default/ufw
@@ -4,7 +4,7 @@
 # Set to yes to apply rules to support IPv6 (no means only IPv6 on loopback
 # accepted). You will need to 'disable' and then 'enable' the firewall for
 # the changes to take affect.
-IPV6=yes
+IPV6=no
 
 # Set the default input policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT.
 # ACCEPT enables connection tracking for NEW inbound packets on the INPUT
@@ -45,5 +45,5 @@ IPT_SYSCTL=/etc/ufw/sysctl.conf
 # nf_conntrack_pptp, nf_nat_pptp: PPTP over stateful firewall/NAT
 # nf_conntrack_ftp, nf_nat_ftp: active FTP support
 # nf_conntrack_tftp, nf_nat_tftp: TFTP support (server side)
-IPT_MODULES="nf_conntrack_ftp nf_nat_ftp nf_conntrack_netbios_ns"
+#IPT_MODULES="nf_conntrack_ftp nf_nat_ftp nf_conntrack_netbios_ns"
 
diff --git a/ufw/after.rules b/ufw/after.rules
index 0d6c646..8d84cf4 100644
--- a/ufw/after.rules
+++ b/ufw/after.rules
@@ -24,7 +24,7 @@
 -A ufw-after-input -p udp --dport 68 -j ufw-skip-to-policy-input
 
 # don't log noisy broadcast
--A ufw-after-input -m addrtype --dst-type BROADCAST -j ufw-skip-to-policy-input
+#-A ufw-after-input -m addrtype --dst-type BROADCAST -j ufw-skip-to-policy-input
 
 # don't delete the 'COMMIT' line or these rules won't be processed
 COMMIT
diff --git a/ufw/before.rules b/ufw/before.rules
index bc11f36..3ea3d1d 100644
--- a/ufw/before.rules
+++ b/ufw/before.rules
@@ -42,20 +42,20 @@
 #
 # ufw-not-local
 #
--A ufw-before-input -j ufw-not-local
+#-A ufw-before-input -j ufw-not-local
 
 # if LOCAL, RETURN
--A ufw-not-local -m addrtype --dst-type LOCAL -j RETURN
+#-A ufw-not-local -m addrtype --dst-type LOCAL -j RETURN
 
 # if MULTICAST, RETURN
--A ufw-not-local -m addrtype --dst-type MULTICAST -j RETURN
+#-A ufw-not-local -m addrtype --dst-type MULTICAST -j RETURN
 
 # if BROADCAST, RETURN
--A ufw-not-local -m addrtype --dst-type BROADCAST -j RETURN
+#-A ufw-not-local -m addrtype --dst-type BROADCAST -j RETURN
 
 # all other non-local packets are dropped
--A ufw-not-local -m limit --limit 3/min --limit-burst 10 -j ufw-logging-deny
--A ufw-not-local -j DROP
+#-A ufw-not-local -m limit --limit 3/min --limit-burst 10 -j ufw-logging-deny
+#-A ufw-not-local -j DROP
 
 # allow MULTICAST mDNS for service discovery (be sure the MULTICAST line above
 # is uncommented)
@@ -65,5 +65,9 @@
 # is uncommented)
 -A ufw-before-input -p udp -d 239.255.255.250 --dport 1900 -j ACCEPT
 
+#
+# OpenVZ has issues the "-m comment" args that ufw adds, so do this manually
+-A ufw-before-input -p tcp --dport 22 -j ACCEPT
+
 # don't delete the 'COMMIT' line or these rules won't be processed
 COMMIT
diff --git a/ufw/ufw.conf b/ufw/ufw.conf
index 8336b91..28fe534 100644
--- a/ufw/ufw.conf
+++ b/ufw/ufw.conf
@@ -3,7 +3,7 @@
 
 # Set to yes to start on boot. If setting this remotely, be sure to add a rule
 # to allow your remote connection before starting ufw. Eg: 'ufw allow 22/tcp'
-ENABLED=no
+ENABLED=yes
 
 # Please use the 'ufw' command to set the loglevel. Eg: 'ufw logging medium'.
 # See 'man ufw' for details.
-- 
1.7.9.5