apu2a4-coreboot-20160304-bootlog-pxe-v3.txt

PCEngines apu2
coreboot build 20160311
4080 MB ECC DRAM

SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
Found mainboard PC Engines PCEngines apu2
multiboot: eax=0, ebx=0
boot order:
1: /pci@i0cf8/usb@10/usb-*@1
2: /pci@i0cf8/usb@10/usb-*@2
3: /pci@i0cf8/usb@10/usb-*@3
4: /pci@i0cf8/usb@10/usb-*@4
5: /pci@i0cf8/*@14,7
6: /pci@i0cf8/*@11/drive@0/disk@0
7: /pci@i0cf8/*@11/drive@1/disk@0
8: /rom@genroms/pxe.rom
9: pxen0
10: scon1
11: 
Found 21 PCI devices (max PCI bus is 03)
Copying SMBIOS entry point from 0xdffb7000 to 0x000f3110
Copying ACPI RSDP from 0xdffb8000 to 0x000f30e0
Copying MPTABLE from 0xdffdc000/dffdc010 to 0x000f2f30
Copying PIR from 0xdffdd000 to 0x000f2f00
Using pmtimer, ioport 0x818
Scan for VGA option rom
Running option rom at c000:0003

Google, Inc.
Serial Graphics Adapter 08/22/15
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (wiv@coreboot-Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015
Term: 238x71
IO4 0
Turning on vga text mode console
SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte contexts
XHCI    extcap 0x1 @ feb22500
XHCI    protocol USB  3.00, 2 ports (offset 1), def 0
XHCI    protocol USB  2.00, 2 ports (offset 3), def 10
XHCI    extcap 0xa @ feb22540
Found 2 serial ports
ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
EHCI init on dev 00:13.0 (regs=0xfeb25420)
ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
Searching bootorder for: /pci@i0cf8/*@14,7
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/setup
XHCI port #3: 0x002202a0, powered, pls 5, speed 0 [ - ]
XHCI port #1: 0x00021203, powered, enabled, pls 0, speed 4 [Super]
Searching bootorder for: /pci@i0cf8/usb@10/storage@1/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@10/usb-*@1
USB MSC vendor='UFD 3.0' product='Silicon-Power16G' rev='1100' type=0 removable=1
USB MSC blksize=512 sectors=31490048
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
Running option rom at c100:0003


iPXE (http://ipxe.org) 00:00.0 C100 PCI2.10 PnP PMMpmm call arg1=1
pmm call arg1=0
+DFF49180pmm call arg1=1
pmm call arg1=0
+DFE89180 C100
Press Ctrl-B to configure iPXE (PCI 00:00.0)...                                                                               

iPXE (PCI 00:00.0) starting execution...ok
iPXE initialising devices...ok



iiPPXXEE  11..00..00++  ((ee330033)) -- Open Source Network Boot Firmware -- hhttttpp::////iippxxee..oorrgg
Features: DNS FTP HTTP HTTPS iSCSI NFS SLAM TFTP VLAN AoE ELF MBOOT NBI PXE SDI bzImage COMBOOT Menu PXEXT
iPXE> ifconf net0
Configuring (net0 00:0d:b9:3f:9e:58)............... ok
iPXE> h dhcp net0
Configuring (net0 00:0d:b9:3f:9e:58)............... ok
iPXE> autoboot net0
net0: 00:0d:b9:3f:9e:58 using i210-2 on PCI01:00.0 (open)
  [Link:up, TX:16 TXE:0 RX:6 RXE:0]
Configuring (net0 00:0d:b9:3f:9e:58)............... ok
net0: 192.168.0.54/255.255.255.0 gw 192.168.0.1
net0: fe80::20d:b9ff:fe3f:9e58/64
net1: fe80::20d:b9ff:fe3f:9e59/64 (inaccessible)
net2: fe80::20d:b9ff:fe3f:9e5a/64 (inaccessible)
Next server: 192.168.0.1
Filename: /srv/tftp/pxelinux.0
tftp://192.168.0.1//srv/tftp/pxelinux.0... ok
pxelinux.0 : 42988 bytes [PXE-NBP]

PXELINUX 6.03 PXE 20150819 Copyright (C) 1994-2014 H. Peter Anvin et al+---------------------------------------+
| Debian GNU/Linux installer boot menu |
|---------------------------------------|
| Install                               |
| Advanced options                    > |
| Help                                  |
| Install with speech synthesis         |
|                                       |
|                                       |
|                                       |
|                                       |
|                                       |
|                                       |
+---------------------------------------+Press ENTER to boot or TAB to edit a menu entry