piratecarrot

Doing less checks than that, to make it as much of a copy and paste affair as possible.

Update current system

sudo apt update
sudo apt upgrade -y
sudo apt full-upgrade -y

These steps have to be done on Windows unfortunately

At a command prompt MediaCreationTool_22H2.exe /Eula Accept /Retail /MediaArch x64 /MediaLangCode en-GB /MediaEdition Enterprise

Product Key Windows 10 Enterprise NPPR9-FWDCX-D2C8J-H872K-2YT43

Covers the MCF523x, MPC5500, MPC5600, MPC5700, MPX40 and all eTPU-equipped Devices

This assumes you are using libvirt, I have not tested on anything else.

Add the below ACPI section with the table entry to your libvirt XML file.

	# Disabled flag, used to check and enable or disable login provider.
	# 1 = Disabled credential provider
	# 0 = Enabled credential provider
	$DisbaleFlag = "1"

	# Registry keys for removing Password and Pin login.
	$registryKeys =
	@(
	[pscustomobject]@{Name="PasswordProvider";Location="HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\Credential Providers\{60b78e88-ead8-445c-9cfd-0b87f74ea6cd}";Key="Disabled";Value="1"},
	# [pscustomobject]@{Name="PINLogonProvider";Location="HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\Credential Providers\{cb82ea12-9f71-446d-89e1-8d0924e1256e}";Key="Disabled";Value="1"},

	#!/usr/bin/env python

	import glob, os
	import tomllib

	data = {}

	for file in glob.glob("build/env.d/*.env"):
	with open(file, "rb") as f:
	for k, v in tomllib.load(f).items():

	set interfaces openvpn vtun0 mode client

	set interfaces openvpn vtun0 remote-host <remote-host>
	set interfaces openvpn vtun0 remote-port <remote-port>
	set interfaces openvpn vtun0 persistent-tunnel

	set interfaces openvpn vtun0 authentication username <username>
	set interfaces openvpn vtun0 authentication password <password>
	set interfaces openvpn vtun0 encryption aes256
	set interfaces openvpn vtun0 hash sha512

	# /etc/udev/rules.d/10-keyboard-leds.rules
	ACTION=="add", SUBSYSTEM=="leds", DEVPATH=="/devices/platform/tuxedo_keyboard/leds/rgb:kbd_backlight_2", RUN+="/usr/local/bin/keyboard-leds.sh"