Logitech Speaker System Z906 remote IR codes

Logitec-z960-IR-codes.md

From:

• http://www.hifi-remote.com/forums/viewtopic.php?t=14120
• http://www.remotecentral.com/cgi-bin/mboard/rc-discrete/thread.cgi?7852

Code:
Protocol: NEC1
Device: 2
SubDevice: 160

Func.  OBC  HEX  EFC
Power: 128  FE   189
Input: 8    EF   053
Mute:  234  A8   079
Level: 10   AF   055
Plus:  170  AA   095
Effect:14   8F   054
Minus: 106  A9   071

Input1 4    DF   180
Input2 130  BE   191
Input3 12   CF   052
Input4 140  CE   060
Input5 2    BF   183
AUX    66   BD   167
TEST   1    7F   185


Code:
Upgrade Code 0 = 34 57 (Amp/1111) Logitech Speaker System Z906 (RM v2.02 Beta)
 5A 00 F5 20 BF FA 7F DF BE CF CE BF BD 00 00 00
 AA A9 A8 AF 8F FE EF
End

Could anybody post a base64 codes for this remote to use with Home Assistant Broadlink integration?

The ones below I was able to "learn" by pressing physical buttons on the remote, but I am not able to figure out the codes for INPPUT1-INPUT5 because the remote does not have those physical buttons...

"logitech_z906_speakers": {
    "power": "JgBYAAABJpEUERQ1FBEUEBQRFBEUERQQFBEUERISFBEUERQ1FBEUNRQRFBAUERQRFBEUEBMSFDUUNRQ1FDUUNhQ1FDUUNRQQFAAF3AABJ0gUAAxMAAEoRxIADQU=",
    "input": "JgBQAAABJJMTEhI3EhMSExISExISExITEhITEhITEhITEhI3ExISNxMSEhMSEhM3EhISExITEhITNxI3EjcSEhM3EjcSNxI3EgAF3QABJkkSAA0F",
    "mute": "JgBQAAABJJMTEhI3ExISExITEhISExITEhITEhITEhMSEhM2ExISNxMSEjcSExI3EhMSNxI3EjcSNxITEjcSExI3EhMSEhMSEgAF3QABJkkSAA0F",
    "level": "JgBQAAABJZMSEhM3EhITEhITEhMSEhITEhMSEhMSEhMSEhM3EhITNxISEzYTEhI3EhMSExISExISNxITEjcSExI3EjcSNxI3EgAF3QABJkkTAA0F",
    "volume_down": "JgBQAAABJZMSExI3EhITEhITEhMSEhMSEhMSExISExISExI5EBMSNxISEzcSExI2ExISNxM2ExISNxITEjcSExI3EhMSEhM2EwAF3AABJkoSAA0F",
    "volume_up": "JgBQAAABJZMSEhM3EhISExITEhITEhITEhMSEhMSEhMSEhM3EhMSNxISEzYTEhI3EhMSNxITEjcSNxITEjcSExI3EhITNxISEgAF3QABJkkTAA0F",
    "effect": "JgBQAAABJJMSExQ1FBESExMRFBEUERISFBEUERQRFBAUERI3EhMUNRITFDUUNRQ1EhMSExQQFBEUNRITFBESEhQ1FDYUNRQ1FAAF2gABKEgUAA0F"
}

no need for help anymore, I managed to convert codes available here https://sourceforge.net/p/lirc-remotes/code/ci/master/tree/remotes/logitech/
using this tool https://github.com/molexx/irdb2broadlinkha
(installed Ubuntu under WSL especially for this)

here is the output in case anybody needs that - it works:

'z906key_power':
  friendly_name: "z906KEY_POWER"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREhESERIREhESERIREjQSNBI0EjQSNBI0EjQSNBIREwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input':
  friendly_name: "z906INPUT"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREhESERI0EhESERIREhESNBI0EjQSERI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906key_mute':
  friendly_name: "z906KEY_MUTE"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERI0EhESNBI0EjQSNBIREjQSERI0EhESERIREwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906level':
  friendly_name: "z906LEVEL"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERI0EhESERIREhESNBIREjQSERI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906effect':
  friendly_name: "z906EFFECT"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSNBI0EhESERIREhESNBIREhESERI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906key_kpplus':
  friendly_name: "z906KEY_KPPLUS"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERI0EhESNBI0EhESNBIREjQSERI0EhESERI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906key_kpminus':
  friendly_name: "z906KEY_KPMINUS"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERI0EhESNBIREjQSNBIREjQSERI0EhESNBIREwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input1':
  friendly_name: "z906INPUT1"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREhESNBIREhESERIREhESNBI0EhESNBI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input2':
  friendly_name: "z906INPUT2"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERIREhESERIREjQSNBIREjQSNBI0EjQSNBIREwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input3':
  friendly_name: "z906INPUT3"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREhESNBI0EhESERIREhESNBI0EhESERI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input4':
  friendly_name: "z906INPUT4"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREhESNBI0EhESERIREjQSNBI0EhESERI0EjQSNBIREwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input5':
  friendly_name: "z906INPUT5"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERIREhESERIREhESNBIREjQSNBI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906key_aux':
  friendly_name: "z906KEY_AUX"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERIREhESERI0EhESNBIREjQSNBI0EjQSERI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906test':
  friendly_name: "z906TEST"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBI0EhESERIREhESERIREhESERI0EjQSNBI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

Nice! Thank you!

no need for help anymore, I managed to convert codes available here https://sourceforge.net/p/lirc-remotes/code/ci/master/tree/remotes/logitech/ using this tool https://github.com/molexx/irdb2broadlinkha (installed Ubuntu under WSL especially for this)

here is the output in case anybody needs that - it works:

'z906key_power':
  friendly_name: "z906KEY_POWER"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREhESERIREhESERIREjQSNBI0EjQSNBI0EjQSNBIREwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input':
  friendly_name: "z906INPUT"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREhESERI0EhESERIREhESNBI0EjQSERI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906key_mute':
  friendly_name: "z906KEY_MUTE"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERI0EhESNBI0EjQSNBIREjQSERI0EhESERIREwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906level':
  friendly_name: "z906LEVEL"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERI0EhESERIREhESNBIREjQSERI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906effect':
  friendly_name: "z906EFFECT"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSNBI0EhESERIREhESNBIREhESERI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906key_kpplus':
  friendly_name: "z906KEY_KPPLUS"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERI0EhESNBI0EhESNBIREjQSERI0EhESERI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906key_kpminus':
  friendly_name: "z906KEY_KPMINUS"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERI0EhESNBIREjQSNBIREjQSERI0EhESNBIREwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input1':
  friendly_name: "z906INPUT1"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREhESNBIREhESERIREhESNBI0EhESNBI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input2':
  friendly_name: "z906INPUT2"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERIREhESERIREjQSNBIREjQSNBI0EjQSNBIREwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input3':
  friendly_name: "z906INPUT3"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREhESNBI0EhESERIREhESNBI0EhESERI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input4':
  friendly_name: "z906INPUT4"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREhESNBI0EhESERIREjQSNBI0EhESERI0EjQSNBIREwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906input5':
  friendly_name: "z906INPUT5"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERIREhESERIREhESNBIREjQSNBI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906key_aux':
  friendly_name: "z906KEY_AUX"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBIREjQSERIREhESERI0EhESNBIREjQSNBI0EjQSERI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

'z906test':
  friendly_name: "z906TEST"
  command_on: 'JgBQAAABJpASERI0EhESERIREhESERIREhESERIREhESERI0EhESNBI0EhESERIREhESERIREhESERI0EjQSNBI0EjQSNBI0EwAGDQABJkYTAAxHDQUAAAAAAAA='

Hi, very nice thank you very much. I am just working on the exact same thing.
One question, can you tell me where are the codes stored for Broadlink integration in Home Assistant please? I could not find the file.
Thanks in advance :)

on my RaspberryPi the Broadlink config file is here:
/config/.storage/broadlink_remote_24dfa7f0e29c_codes

Yeah I know already. I missed the "." in storage folder name so did not realized its hidden folder and cant be seen in file editor xD
One more thing. Did you just modified and saved the file with codes? Or is there some different approach to learn the codes correctly?
I am asking mostly because of the Input1-5 codes which does not have physical buttons on remote.

i only edited this file by adding new codes wrapped by the same syntax as others previously learned, it worked immediately after edits

Thank you very much, finally I can use one remote for Xiaomi box, TV and Z906 plus some automations for switching inputs based on active devices :)

Hi, anybode who made it work with esphome? could use some help. it took the codes from @hatl in translated it in binary format but it won't work.

hi

here's the relevant part of my esphome config:

remote_transmitter:
  pin: GPIO0
  # Infrared remotes use a 50% carrier signal
  carrier_duty_percent: 50%

button: !include common/z906_ir.yaml

and the content of z906_ir.yaml

  - platform: template
    name: "Z906 Power Toggle"
    id: z906_power_toggle
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400501FE
          nbits: 32
  - platform: template
    name: "Z906 Next Input"
    id: z906_next_input
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400510EF
          nbits: 32
  - platform: template
    name: "Z906 Input 1"
    id: z906_input_1
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400520DF
          nbits: 32
  - platform: template
    name: "Z906 Input 2"
    id: z906_input_2
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400541BE
          nbits: 32
  - platform: template
    name: "Z906 Input 3"
    id: z906_input_3
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400530CF
          nbits: 32
  - platform: template
    name: "Z906 Input 4"
    id: z906_input_4
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400531CE
          nbits: 32
  - platform: template
    name: "Z906 Input 5"
    id: z906_input_5
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400540BF
          nbits: 32
  - platform: template
    name: "Z906 Mute"
    id: z906_mute
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400557A8
          nbits: 32
  - platform: template
    name: "Z906 Level"
    id: z906_level
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400550AF
          nbits: 32
  - platform: template
    name: "Z906 Effect"
    id: z906_effect
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x4005708F
          nbits: 32
  - platform: template
    name: "Z906 Volume Down"
    id: z906_volume_down
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400556A9
          nbits: 32
  - platform: template
    name: "Z906 Volume Up"
    id: z906_volume_up
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400555AA
          nbits: 32
  - platform: template
    name: "Z906 AUX"
    id: z906_aux
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x400542BD
          nbits: 32
  - platform: template
    name: "Z906 Test"
    id: z906_test
    on_press:
      - remote_transmitter.transmit_lg:
          data: 0x4005807F
          nbits: 32