pm0u

I'll research each of these. Let me dig in.

Researched all six. Short version: two are real candidates, one is a probable mismatch, and three should come off the list.

---

Take these off the list

Franciscan Children's — pediatric hospital. Not applicable to an adult. (Also flagged "Fax only," meaning slower referral handling.)

pm0u

smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.10-2-cachyos] (local build)
Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 850 EVO 500GB
Serial Number:    S2RANX0H418474A
LU WWN Device Id: 5 002538 d40cf8749
Firmware Version: EMT02B6Q
User Capacity:    500,107,862,016 bytes [500 GB]

pm0u

#! /bin/bash

PORTRAIT=0;
WIDTH=-2;
HEIGHT=-2;
FRAMERATE=18

while [[ $# -gt 0 ]]; do
  case $1 in
    -p)

pm0u

[default]: 2025-07-10 22:29:07.529:[Debug] [Thread: 0x7f086045a900] Opened Log File at:  "/home/marvin/Documents/HueForge/Logs" (:0, )
[default]: 2025-07-10 22:29:07.529:[Debug] [Thread: 0x7f086045a900] CrashLog will write to:  "/home/marvin/Documents/HueForge/Logs/crashlog.txt" (:0, )
[default]: 2025-07-10 22:29:07.540:[Debug] [Thread: 0x7f086045a900] Found preferred font: "Noto Sans" (:0, )
[default]: 2025-07-10 22:29:07.540:[Debug] [Thread: 0x7f086045a900] Application font set to: QFont(Noto Sans,10,-1,5,700,0,0,0,0,0,0,0,0,0,0,1) (:0, )
[default]: 2025-07-10 22:29:07.540:[Debug] [Thread: 0x7f086045a900] Arguments  QList("/tmp/.mount_HueFor9vZQtA/usr/bin/HueForge") (:0, )
[default]: 2025-07-10 22:29:07.540:[Debug] [Thread: 0x7f086045a900] Checking  "/home/marvin/.local/share/HueForge"  for HueForge program files (:0, )
[default]: 2025-07-10 22:29:07.540:[Debug] [Thread: 0x7f086045a900] The time on this EXE is the same or older than the last time these files were updated.  Skipping (:0, )
[default]: 2025-07

pm0u

{
    "Filaments": [
        {
            "Brand": "Ecogenesis/Polar",
            "Color": "#131919",
            "Name": "Black",
            "Owned": false,
            "Tags": [
            ],
            "Transmissivity": 0.1,

pm0u

{
  allocation: 'allocation-22704',
  experiment: 'paul-test-flag-server-allocation-22704',
  featureFlag: 'paul-test-flag-server',
  format: 'SERVER',
  variation: 'true',
  subject: 'c76f3d8e-ec41-43ec-a3b2-0a3327eb60bc',
  timestamp: '2025-03-24T17:34:17.649Z',
  subjectAttributes: {},
  metaData: {

pm0u

0x305, 0x302, 35x302, 35x305, 305x305, 305x305, 305x305, 305x20, 293x20, 293x0, 305x0, 305x20, 305x305

pm0u

#*# [bed_mesh contact_10x10]
#*# version = 1
#*# points =
#*# 	-0.056022, -0.069881, -0.069053, -0.047402, -0.028046, -0.007969, 0.003663, 0.028130, 0.027355, 0.047412
#*# 	-0.043262, -0.078527, -0.066762, -0.044590, -0.019192, -0.006875, 0.001423, -0.008536, -0.000822, 0.016787
#*# 	-0.007324, -0.054308, -0.052491, -0.021465, -0.003463, 0.013698, 0.023507, 0.015578, 0.004594, 0.031735
#*# 	-0.022897, -0.054569, -0.058376, -0.032246, -0.004088, 0.010625, -0.002483, -0.004057, 0.004542, 0.019756
#*# 	0.012676, -0.041444, -0.045043, -0.018913, 0.014714, 0.023593, 0.010642, -0.004682, 0.000844, 0.034079
#*# 	-0.000918, -0.045611, -0.050928, -0.030111, -0.010703, 0.001250, 0.003611, -0.004526, -0.005302, 0.019391
#*# 	-0.004876, -0.051704, -0.052178, -0.046465, -0.035859, -0.013750, -0.003004, -0.019005, 0.002615, 0.025277

pm0u

[gcode_macro G29]
variable_k:1
description: Prepare print bed, generate a bed mesh, and apply global Z nozzle offset
gcode:
    _FIND_Z_EQUALS_ZERO                                            # The user must make sure that nothing else homes Z after this call
    {% if k|int==1 %}
        BED_MESH_CALIBRATE RUNS=2 PROFILE=kamp
        BED_MESH_PROFILE LOAD=kamp
        SAVE_VARIABLE VARIABLE=profile_name VALUE='"kamp"'
    {% else %}

pm0u

[gcode_macro PRINT_START]
gcode:
    {% set bedtemp = params.BED|int %}
    {% set hotendtemp = params.HOTEND|int %}
    {% set chambertemp = params.CHAMBER|default(0)|int %}
    SET_GCODE_VARIABLE MACRO=_APPLY_NOZZLE_OFFSET VARIABLE=hotend_temp VALUE={hotendtemp}

    M140 S{bedtemp}                     # Initiate Print Bed Warmup as early as possible
    M400                                # Wait for all prior G-code commands to be processed by MCU
    M104 S0                             # Make sure hotend is off