| Service | Config Folder | Config File |
|---|---|---|
| Nginx | /etc/nginx/ | /etc/nginx/nginx.conf |
| PHP FPM | /etc/php-fpm.d/ | /etc/php.fpm.conf |
| PHP (extn) | /etc/php.d/ | /etc/php.ini |
;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;
; All relative paths in this configuration file are relative to PHP's install
; prefix.
; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
include=/etc/php-fpm.d/*.conf
;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;
[global]
; Pid file
; Default Value: none
pid = /var/run/php-fpm/php-fpm.pid
; Error log file
; Default Value: /var/log/php-fpm.log
error_log = /var/log/php-fpm/error.log
; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice
; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0
; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated. This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;emergency_restart_interval = 0
; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0
; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
daemonize = no
;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;
; See /etc/php-fpm.d/*.confserver {
listen 80;
charset utf-8;
server_name web.qa.xcite.com;
root /var/www/webqa;
# logs
access_log /var/log/nginx/webqa-access.log;
error_log /var/log/nginx/webqa-error.log error;
# gzip everything except for ie6 (legacy)
gzip on;
gzip_static on;
gzip_min_length 1000;
gzip_proxied any;
gzip_types text/plain text/css text/javascript application/x-javascript;
gzip_disable "msie6";
gzip_vary on;
error_page 404 /404.html;
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root /usr/share/nginx/html;
}
set $media "";
if ($request_uri ~ '^/(media|skin|favicon\.ico)/') {
set $media "D";
}
# media location
location ^~ /media/ {
alias /var/www/orange-media/;
expires 1M;
}
# fonts for IE9/Chrome using CDN
set $font "";
if ($request_filename ~ "\.(ttf|eot|woff)$") {
set $font "F";
}
# skin location
location ^~ /skin/ {
expires 1w;
if ($font) {
add_header Access-Control-Allow-Origin *;
}
}
location / {
try_files $uri index.php/ /index.php$is_args$args;
}
# pass the PHP scripts to FastCGI server
location ~ \.php$ {
try_files $uri $uri/ /index.php$is_args$args;
fastcgi_pass unix:/var/run/php-fpm/webqa.socket;
index index.html index.htm index.php;
fastcgi_index index.php;
include fastcgi.conf;
fastcgi_param HTTPS off;
}
}
server {
listen 81;
charset utf-8;
server_name web.qa.xcite.com;
root /var/www/webqa;
# logs
access_log /var/log/nginx/webqa-access.log;
error_log /var/log/nginx/webqa-error.log error;
# gzip everything except for ie6 (legacy)
gzip on;
gzip_static on;
gzip_min_length 1000;
gzip_proxied any;
gzip_types text/plain text/css text/javascript application/x-javascript;
gzip_disable "msie6";
gzip_vary on;
#ssl on;
#ssl_certificate /etc/nginx/ssl/server.crt;
#ssl_certificate_key /etc/nginx/sl/server.key;
error_page 404 /404.html;
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root /usr/share/nginx/html;
}
# media flag, used for maintenance mode
set $media "";
if ($request_uri ~ '^/(media|skin|favicon\.ico)/') {
set $media "D";
}
# media location
location ^~ /media/ {
alias /var/www/orange-media/;
expires 1M;
}
# fonts for IE9/Chrome using CDN
set $font "";
if ($request_filename ~ "\.(ttf|eot|woff)$") {
set $font "F";
}
# skin location
location ^~ /skin/ {
expires 1w;
if ($font) {
add_header Access-Control-Allow-Origin *;
}
}
location / {
try_files $uri index.php/ /index.php$is_args$args;
}
# pass the PHP scripts to FastCGI server
location ~ \.php$ {
try_files $uri $uri/ /index.php$is_args$args;
index index.html index.htm index.php;
fastcgi_pass unix:/var/run/php-fpm/webqa.socket;
fastcgi_index index.php;
include fastcgi.conf;
fastcgi_param HTTPS on;
}
}
Create a file called webqa.conf in /etc/php-fpm.d
; Start a new pool named 'www'.
[webqa]
listen = /var/run/php-fpm/webqa.socket
; List of ipv4 addresses of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
;listen.allowed_clients = 127.0.0.1
; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions.
; Default Values: user and group are set as the running user
; mode is set to 0666
listen.owner = root
listen.group = root
listen.mode = 0666
; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
; will be used.
; RPM: apache Choosed to be able to access some dir as httpd
user = apache
; RPM: Keep a group allowed to write in log dir.
group = apache
; Choose how the process manager will control the number of child processes.
; Possible Values:
; static - a fixed number (pm.max_children) of child processes;
; dynamic - the number of child processes are set dynamically based on the
; following directives:
; pm.max_children - the maximum number of children that can
; be alive at the same time.
; pm.start_servers - the number of children created on startup.
; pm.min_spare_servers - the minimum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is less than this
; number then some children will be created.
; pm.max_spare_servers - the maximum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is greater than this
; number then some children will be killed.
; Note: This value is mandatory.
pm = dynamic
; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes to be created when pm is set to 'dynamic'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI.
; Note: Used when pm is set to either 'static' or 'dynamic'
; Note: This value is mandatory.
pm.max_children = 50
; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 5
; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 5
; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 35
; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
;pm.max_requests = 500
; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. By default, the status page shows the following
; information:
; accepted conn - the number of request accepted by the pool;
; pool - the name of the pool;
; process manager - static or dynamic;
; idle processes - the number of idle processes;
; active processes - the number of active processes;
; total processes - the number of idle + active processes.
; The values of 'idle processes', 'active processes' and 'total processes' are
; updated each second. The value of 'accepted conn' is updated in real time.
; Example output:
; accepted conn: 12073
; pool: www
; process manager: static
; idle processes: 35
; active processes: 65
; total processes: 100
; By default the status page output is formatted as text/plain. Passing either
; 'html' or 'json' as a query string will return the corresponding output
; syntax. Example:
; http://www.foo.bar/status
; http://www.foo.bar/status?json
; http://www.foo.bar/status?html
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;pm.status_path = /status
; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping
; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong
; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_terminate_timeout = 0
; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_slowlog_timeout = 0
; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
slowlog = /var/log/php-fpm/www-slow.log
; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024
; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0
; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: chrooting is a great security feature and should be used whenever
; possible. However, all PHP paths will be relative to the chroot
; (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot =
; Chdir to this directory at the start. This value must be an absolute path.
; Default Value: current directory or / when chroot
;chdir = /var/www
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Default Value: no
;catch_workers_output = yes
; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; exectute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5
; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
env[HOSTNAME] = $HOSTNAME
env[PATH] = /usr/local/bin:/usr/bin:/bin
env[TMP] = /tmp
env[TMPDIR] = /tmp
env[TEMP] = /tmp
; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
; php_value/php_flag - you can set classic ini defines which can
; be overwritten from PHP call 'ini_set'.
; php_admin_value/php_admin_flag - these directives won't be overwritten by
; PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
;
PHP Extensions
[root@586291-devdb2 php.d]# ls /etc/php.d/ curl.ini gd.ini mbstring.ini mysqli.ini pdo_mysql.ini soap.ini xmlreader.ini zip.ini dom.ini imagick.ini mcrypt.ini mysql.ini pdo_sqlite.ini sqlite3.ini xmlwriter.ini fileinfo.ini json.ini memcache.ini pdo.ini phar.ini wddx.ini xsl.ini