OpenWRT on Orange Pi Zero using Armbian uBoot and Kernel

OpenWRT.Armbian.OPZ

Guide:

1. Install Armbian_5.24.161216_Orangepizero_Ubuntu_xenial_3.4.113.img onto a uSD card using Win32DiskImager or Ubuntu Disk Image Writer

2. (Optional) Mount the uSD in Ubuntu Laptop and expand the partition using GParted.

3. Delete everything from uSD except /boot, /lib/modules and /lib/firmware.

4. Mount openwrt-15.05.1-sunxi-root.ext4 on Ubuntu using loopback interface on /mnt/openwrt

	#mount -o loop openwrt-15.05.1-sunxi-root.ext4 /mnt/openwrt

5. Copy over the contents of /mnt/openwrt to the root of uSD by merging folders when prompted.

6. Modify /etc/init.d/boot and add 'ulimit -n 10000' before '/sbin/kmloader' command (line39).

7. Change directory to /lib/modules/3.4.113-sun8i - "#cd /lib/modules/3.4.113-sun8i"

8. Create link-ko.sh - "#touch link-ko.sh"

9. Edit link-ko.sh - "#nano link-ko.sh"

10. Copy the below contents into that file, save (Ctrl + O) and close (Ctrl + X) file.

for x in `find -name *.ko`
do
    ln -s $x .
done

11. Then make link-ko.sh executable - "#chmod +x link-ko.sh"

12. Execute link-ko.sh - "#./link-ko.sh"

13. To enable WiFi - #printf "xradio_wlan\nxradio_wlan" >> /etc/modules.d/xradio_wlan

14. Replace Lan section in /etc/config/network with the below. (You can customize the below to suit you LAN and Router configuration.)

Option 1:

config interface 'lan'
	option proto 'static'
	option netmask '255.255.255.0'
	option ipaddr '192.168.1.1'
	option ifname 'eth0'
	
Option 2:

config interface 'lan'
	option proto 'dhcp'
	option ifname 'eth0'



15. Transfer the uSD to OPiZero and power up.

16. 'telnet 192.168.1.1', update password using '#passwd root' and then exit. 

	If you are unable to login, 
	wait for 10 mins to complete first boot up, 
	switch off OPiZero, 
	remove uSD and 
	repeat steps from network configuration using /etc/config/network

17. 'ssh 192.168.1.1' - peace.

Notes:

Hi Guys, I am dying to know how to use this as AP mode via Luci.. I've already taken a little effort. But still no use. Can somebody help me ?

Guys, I am following the guide, but I am unable to boot:

Begin: Running /scripts/init-bottom ... done.
mount: mounting /run on /root/run failed: No such file or directory
run-init: /sbin/init: No such file or directory
[ 3.640294] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100

/root/run is empty, /sbin/init is exist.

What's wrong here? Or could you please upload a working image?

Do you have a working image?

Here are pre-built OpenWrt flash images from orangepi website:
http://www.orangepi.org/downloadresources/

can you port newer openwrt to orange pi zero?

I am using version 18 (Tried 15)
But still not successful
Don’t show wifi wireless network and don’t work

I have configured /etc/config/network

config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'

config globals 'globals'
option ula_prefix 'fdd0:3fab:1a10::/48'

config interface 'lan'
option ifname 'eth0'
option force_link '1'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'

config interface 'wwan'
option proto 'dhcp'

I have configured /etc/config/network

config wifi-device 'radio0'
option type 'mac80211'
option hwmode '11g'
option path 'platform/sunxi-mmc.1/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
option htmode 'HT20'
option disabled '0'
option channel '2'
option txpower '20'
option country '00'
config wifi-iface
option network 'wwan'
option ssid 'AP CLIENT'
option encryption 'psk2'
option device 'radio0'
option mode 'sta'
option bssid 'C0:XX:E1:C1:E3:XX'
option key 'password'