Last active
February 5, 2018 07:41
-
-
Save priyadarshan/970c8bba821ca5b7709f8fc1ac9dbf50 to your computer and use it in GitHub Desktop.
Argo first DMESG
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Copyright (c) 1992-2017 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 11.1-RELEASE-p4 #0: Tue Nov 14 06:12:40 UTC 2017 | |
[email protected]:/usr/obj/usr/src/sys/GENERIC amd64 | |
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0) | |
VT(efifb): resolution 1280x1024 | |
CPU: AMD Ryzen Threadripper 1950X 16-Core Processor (3393.70-MHz K8-class CPU) | |
Origin="AuthenticAMD" Id=0x800f11 Family=0x17 Model=0x1 Stepping=1 | |
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> | |
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> | |
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> | |
AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> | |
Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> | |
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> | |
SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 | |
TSC: P-state invariant, performance statistics | |
real memory = 68719476736 (65536 MB) | |
avail memory = 66610909184 (63525 MB) | |
Event timer "LAPIC" quality 100 | |
ACPI APIC Table: <AMD A M I > | |
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs | |
FreeBSD/SMP: 1 package(s) x 16 core(s) x 2 hardware threads | |
random: unblocking device. | |
ioapic0: Changing APIC ID to 128 | |
ioapic1: Changing APIC ID to 129 | |
ioapic2: Changing APIC ID to 130 | |
ioapic0 <Version 2.1> irqs 0-23 on motherboard | |
ioapic1 <Version 2.1> irqs 24-55 on motherboard | |
ioapic2 <Version 2.1> irqs 56-87 on motherboard | |
SMP: AP CPU #20 Launched! | |
SMP: AP CPU #15 Launched! | |
SMP: AP CPU #25 Launched! | |
SMP: AP CPU #17 Launched! | |
SMP: AP CPU #2 Launched! | |
SMP: AP CPU #30 Launched! | |
SMP: AP CPU #16 Launched! | |
SMP: AP CPU #29 Launched! | |
SMP: AP CPU #19 Launched! | |
SMP: AP CPU #28 Launched! | |
SMP: AP CPU #7 Launched! | |
SMP: AP CPU #23 Launched! | |
SMP: AP CPU #21 Launched! | |
SMP: AP CPU #13 Launched! | |
SMP: AP CPU #22 Launched! | |
SMP: AP CPU #18 Launched! | |
SMP: AP CPU #31 Launched! | |
SMP: AP CPU #24 Launched! | |
SMP: AP CPU #3 Launched! | |
SMP: AP CPU #27 Launched! | |
SMP: AP CPU #12 Launched! | |
SMP: AP CPU #26 Launched! | |
SMP: AP CPU #1 Launched! | |
SMP: AP CPU #9 Launched! | |
SMP: AP CPU #8 Launched! | |
SMP: AP CPU #5 Launched! | |
SMP: AP CPU #11 Launched! | |
SMP: AP CPU #6 Launched! | |
SMP: AP CPU #14 Launched! | |
SMP: AP CPU #10 Launched! | |
SMP: AP CPU #4 Launched! | |
Timecounter "TSC-low" frequency 1696852467 Hz quality 1000 | |
random: entropy device external interface | |
kbd1 at kbdmux0 | |
netmap: loaded module | |
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19 | |
random: registering fast source Intel Secure Key RNG | |
random: fast provider: "Intel Secure Key RNG" | |
nexus0 | |
cryptosoft0: <software crypto> on motherboard | |
acpi0: <AMD> on motherboard | |
acpi0: Power Button (fixed) | |
cpu0: <ACPI CPU> on acpi0 | |
cpu1: <ACPI CPU> on acpi0 | |
cpu2: <ACPI CPU> on acpi0 | |
cpu3: <ACPI CPU> on acpi0 | |
cpu4: <ACPI CPU> on acpi0 | |
cpu5: <ACPI CPU> on acpi0 | |
cpu6: <ACPI CPU> on acpi0 | |
cpu7: <ACPI CPU> on acpi0 | |
cpu8: <ACPI CPU> on acpi0 | |
cpu9: <ACPI CPU> on acpi0 | |
cpu10: <ACPI CPU> on acpi0 | |
cpu11: <ACPI CPU> on acpi0 | |
cpu12: <ACPI CPU> on acpi0 | |
cpu13: <ACPI CPU> on acpi0 | |
cpu14: <ACPI CPU> on acpi0 | |
cpu15: <ACPI CPU> on acpi0 | |
cpu16: <ACPI CPU> on acpi0 | |
cpu17: <ACPI CPU> on acpi0 | |
cpu18: <ACPI CPU> on acpi0 | |
cpu19: <ACPI CPU> on acpi0 | |
cpu20: <ACPI CPU> on acpi0 | |
cpu21: <ACPI CPU> on acpi0 | |
cpu22: <ACPI CPU> on acpi0 | |
cpu23: <ACPI CPU> on acpi0 | |
cpu24: <ACPI CPU> on acpi0 | |
cpu25: <ACPI CPU> on acpi0 | |
cpu26: <ACPI CPU> on acpi0 | |
cpu27: <ACPI CPU> on acpi0 | |
cpu28: <ACPI CPU> on acpi0 | |
cpu29: <ACPI CPU> on acpi0 | |
cpu30: <ACPI CPU> on acpi0 | |
cpu31: <ACPI CPU> on acpi0 | |
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 | |
Timecounter "HPET" frequency 14318180 Hz quality 950 | |
Event timer "HPET" frequency 14318180 Hz quality 350 | |
Event timer "HPET1" frequency 14318180 Hz quality 350 | |
Event timer "HPET2" frequency 14318180 Hz quality 350 | |
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 | |
Timecounter "i8254" frequency 1193182 Hz quality 0 | |
Event timer "i8254" frequency 1193182 Hz quality 100 | |
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 | |
Event timer "RTC" frequency 32768 Hz quality 0 | |
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 | |
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 | |
acpi_ec0: <Embedded Controller: GPE 0x2> port 0x62,0x66 on acpi0 | |
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | |
pcib0: _OSC returned error 0x10 | |
pci0: <ACPI PCI bus> on pcib0 | |
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) | |
pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 | |
pci1: <ACPI PCI bus> on pcib1 | |
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xef8a0000-0xef8a7fff irq 24 at device 0.0 on pci1 | |
xhci0: 32 bytes context size, 64-bit DMA | |
usbus0 on xhci0 | |
usbus0: 5.0Gbps Super Speed USB v3.0 | |
ahci0: <AHCI SATA controller> mem 0xef880000-0xef89ffff irq 25 at device 0.1 on pci1 | |
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported | |
ahcich0: <AHCI channel> at channel 0 on ahci0 | |
ahcich1: <AHCI channel> at channel 1 on ahci0 | |
ahcich2: <AHCI channel> at channel 2 on ahci0 | |
ahcich3: <AHCI channel> at channel 3 on ahci0 | |
ahcich4: <AHCI channel> at channel 4 on ahci0 | |
ahcich5: <AHCI channel> at channel 5 on ahci0 | |
ahcich6: <AHCI channel> at channel 6 on ahci0 | |
ahcich7: <AHCI channel> at channel 7 on ahci0 | |
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 0.2 on pci1 | |
pci2: <ACPI PCI bus> on pcib2 | |
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 2.0 on pci2 | |
pci3: <ACPI PCI bus> on pcib3 | |
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x7000-0x701f mem 0xef700000-0xef71ffff,0xef720000-0xef723fff irq 26 at device 0.0 on pci3 | |
igb0: Using MSIX interrupts with 3 vectors | |
igb0: Ethernet address: 10:7b:44:93:e7:3f | |
igb0: Bound queue 0 to cpu 0 | |
igb0: Bound queue 1 to cpu 1 | |
igb0: netmap queues/slots: TX 2/1024, RX 2/1024 | |
pcib4: <ACPI PCI-PCI bridge> irq 27 at device 3.0 on pci2 | |
pci4: <ACPI PCI bus> on pcib4 | |
pcib5: <ACPI PCI-PCI bridge> irq 24 at device 4.0 on pci2 | |
pci5: <ACPI PCI bus> on pcib5 | |
pci5: <network, ethernet> at device 0.0 (no driver attached) | |
pcib6: <ACPI PCI-PCI bridge> irq 25 at device 9.0 on pci2 | |
pci6: <ACPI PCI bus> on pcib6 | |
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xef600000-0xef607fff irq 25 at device 0.0 on pci6 | |
xhci1: 32 bytes context size, 64-bit DMA | |
xhci1: Unable to map MSI-X table | |
usbus1 on xhci1 | |
usbus1: 5.0Gbps Super Speed USB v3.0 | |
pcib7: <ACPI PCI-PCI bridge> at device 7.1 on pci0 | |
pci7: <ACPI PCI bus> on pcib7 | |
pci7: <unknown> at device 0.0 (no driver attached) | |
pci7: <encrypt/decrypt> at device 0.2 (no driver attached) | |
xhci2: <XHCI (generic) USB 3.0 controller> mem 0xefa00000-0xefafffff irq 37 at device 0.3 on pci7 | |
xhci2: 64 bytes context size, 64-bit DMA | |
usbus2 on xhci2 | |
usbus2: 5.0Gbps Super Speed USB v3.0 | |
pcib8: <ACPI PCI-PCI bridge> at device 8.1 on pci0 | |
pci8: <ACPI PCI bus> on pcib8 | |
pci8: <unknown> at device 0.0 (no driver attached) | |
ahci1: <AHCI SATA controller> mem 0xefd08000-0xefd08fff irq 42 at device 0.2 on pci8 | |
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS | |
ahcich8: <AHCI channel> at channel 0 on ahci1 | |
hdac0: <AMD (0x1457) HDA Controller> mem 0xefd00000-0xefd07fff irq 43 at device 0.3 on pci8 | |
isab0: <PCI-ISA bridge> at device 20.3 on pci0 | |
isa0: <ISA bus> on isab0 | |
pcib9: <ACPI Host-PCI bridge> on acpi0 | |
pcib9: _OSC returned error 0x10 | |
pci9: <ACPI PCI bus> on pcib9 | |
pci9: <base peripheral, IOMMU> at device 0.2 (no driver attached) | |
pcib10: <ACPI PCI-PCI bridge> at device 1.1 on pci9 | |
pci10: <ACPI PCI bus> on pcib10 | |
nvme0: <Generic NVMe Device> mem 0xec800000-0xec803fff irq 56 at device 0.0 on pci10 | |
pcib11: <ACPI PCI-PCI bridge> at device 1.3 on pci9 | |
pci11: <ACPI PCI bus> on pcib11 | |
mpr0: <Avago Technologies (LSI) SAS3008> port 0xe000-0xe0ff mem 0xec600000-0xec60ffff irq 64 at device 0.0 on pci11 | |
mpr0: Firmware: 05.00.00.00, Driver: 15.03.00.00-fbsd | |
mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray> | |
pcib12: <ACPI PCI-PCI bridge> at device 3.1 on pci9 | |
pci12: <ACPI PCI bus> on pcib12 | |
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xeb000000-0xebffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 86 at device 0.0 on pci12 | |
vgapci0: Boot video device | |
hdac1: <NVIDIA (0x0fba) HDA Controller> mem 0xec080000-0xec083fff irq 87 at device 0.1 on pci12 | |
pcib13: <ACPI PCI-PCI bridge> at device 7.1 on pci9 | |
pci13: <ACPI PCI bus> on pcib13 | |
pci13: <unknown> at device 0.0 (no driver attached) | |
pci13: <encrypt/decrypt> at device 0.2 (no driver attached) | |
xhci3: <XHCI (generic) USB 3.0 controller> mem 0xec200000-0xec2fffff irq 69 at device 0.3 on pci13 | |
xhci3: 64 bytes context size, 64-bit DMA | |
usbus3 on xhci3 | |
usbus3: 5.0Gbps Super Speed USB v3.0 | |
pcib14: <ACPI PCI-PCI bridge> at device 8.1 on pci9 | |
pci14: <ACPI PCI bus> on pcib14 | |
pci14: <unknown> at device 0.0 (no driver attached) | |
ahci2: <AHCI SATA controller> mem 0xec700000-0xec700fff irq 74 at device 0.2 on pci14 | |
ahci2: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS | |
ahcich9: <AHCI channel> at channel 0 on ahci2 | |
acpi_button0: <Power Button> on acpi0 | |
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xd4800-0xd57ff on isa0 | |
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 | |
atkbd0: <AT Keyboard> irq 1 on atkbdc0 | |
kbd0 at atkbd0 | |
atkbd0: [GIANT-LOCKED] | |
ppc0: cannot reserve I/O port range | |
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 | |
hwpstate0: <Cool`n'Quiet 2.0> on cpu0 | |
ZFS filesystem version: 5 | |
ZFS storage pool version: features support (5000) | |
Timecounters tick every 1.000 msec | |
nvme cam probe device init | |
hdacc0: <Realtek ALC1220 HDA CODEC> at cad 0 on hdac0 | |
hdaa0: <Realtek ALC1220 Audio Function Group> at nid 1 on hdacc0 | |
pcm0: <Realtek ALC1220 (Analog 5.1+HP/2.0)> at nid 20,22,21,27 and 24,26 on hdaa0 | |
pcm1: <Realtek ALC1220 (Rear Digital)> at nid 30 on hdaa0 | |
pcm2: <Realtek ALC1220 (Front Analog Mic)> at nid 25 on hdaa0 | |
ugen3.1: <0x1022 XHCI root HUB> at usbus3 | |
ugen1.1: <0x1b21 XHCI root HUB> at usbus1 | |
ugen0.1: <0x1022 XHCI root HUB> at usbus0 | |
ugen2.1: <0x1022 XHCI root HUB> at usbus2 | |
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 | |
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 | |
uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 | |
uhub3: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 | |
nvd0: <Samsung SSD 960 PRO 512GB> NVMe namespace | |
nvd0: 488386MB (1000215216 512 byte sectors) | |
mpr0: SAS Address for SATA device = 722a2a4384a5a27d | |
hdacc1: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac1 | |
mpr0: SAS Address for SATA device = 8d3e344384a5a27a | |
hdaa1: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc1 | |
mpr0: SAS Address for SATA device = 8f2a344384a5a27c | |
mpr0: SAS Address for SATA device = 98281f4384a5a265 | |
pcm3: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa1 | |
mpr0: SAS Address for SATA device = 8139334384a5a27d | |
mpr0: SAS Address for SATA device = 8a3d404384a5a27a | |
mpr0: SAS Address for SATA device = 8b34294384a5a266 | |
mpr0: SAS Address for SATA device = 99463b4384a5a27c | |
mpr0: SAS Address from SAS device page0 = 4433221100000000 | |
mpr0: SAS Address from SATA device = 722a2a4384a5a27d | |
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0009> enclosureHandle<0x0001> slot 3 | |
mpr0: At enclosure level 0 and connector name ( ) | |
mpr0: SAS Address from SAS device page0 = 4433221101000000 | |
mpr0: SAS Address from SATA device = 8d3e344384a5a27a | |
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000a> enclosureHandle<0x0001> slot 2 | |
mpr0: At enclosure level 0 and connector name ( ) | |
mpr0: SAS Address from SAS device page0 = 4433221102000000 | |
mpr0: SAS Address from SATA device = 8f2a344384a5a27c | |
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000b> enclosureHandle<0x0001> slot 0 | |
pcm4: mpr0: At enclosure level 0 and connector name ( ) | |
<NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa1 | |
mpr0: SAS Address from SAS device page0 = 4433221103000000 | |
mpr0: SAS Address from SATA device = 98281f4384a5a265 | |
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000c> enclosureHandle<0x0001> slot 1 | |
mpr0: At enclosure level 0 and connector name ( ) | |
mpr0: SAS Address from SAS device page0 = 4433221104000000 | |
mpr0: SAS Address from SATA device = 8139334384a5a27d | |
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000d> enclosureHandle<0x0001> slot 7 | |
pcm5: mpr0: At enclosure level 0 and connector name ( ) | |
<NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa1 | |
mpr0: SAS Address from SAS device page0 = 4433221105000000 | |
mpr0: SAS Address from SATA device = 8a3d404384a5a27a | |
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000e> enclosureHandle<0x0001> slot 6 | |
pcm6: mpr0: At enclosure level 0 and connector name ( ) | |
<NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa1 | |
mpr0: SAS Address from SAS device page0 = 4433221106000000 | |
mpr0: SAS Address from SATA device = 8b34294384a5a266 | |
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000f> enclosureHandle<0x0001> slot 4 | |
mpr0: At enclosure level 0 and connector name ( ) | |
mpr0: SAS Address from SAS device page0 = 4433221107000000 | |
mpr0: SAS Address from SATA device = 99463b4384a5a27c | |
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0010> enclosureHandle<0x0001> slot 5 | |
mpr0: At enclosure level 0 and connector name ( ) | |
da0 at mpr0 bus 0 scbus9 target 0 lun 0 | |
da1 at mpr0 bus 0 scbus9 target 1 lun 0 | |
da2 at mpr0 bus 0 scbus9 target 2 lun 0 | |
da4 at mpr0 bus 0 scbus9 target 4 lun 0 | |
da5 at mpr0 bus 0 scbus9 target 5 lun 0 | |
da0: da4: da2: <ATA WDC WD100EFAX-68 0A83> Fixed Direct Access SPC-4 SCSI device | |
da5: da1: <ATA WDC WD100EFAX-68 0A83> Fixed Direct Access SPC-4 SCSI device | |
<ATA WDC WD100EFAX-68 0A83> Fixed Direct Access SPC-4 SCSI device | |
da2: Serial Number 1SHJNLLZ | |
<ATA WDC WD100EFAX-68 0A83> Fixed Direct Access SPC-4 SCSI device | |
da2: 600.000MB/s transfers<ATA WDC WD100EFAX-68 0A83> Fixed Direct Access SPC-4 SCSI device | |
da4: Serial Number 1SH6LBAZ | |
da0: Serial Number 1SHLP8LZ | |
da1: Serial Number 1SH5Y67Z | |
da0: 600.000MB/s transfersda5: Serial Number 1SHLZTSZ | |
da1: 600.000MB/s transfers | |
da4: 600.000MB/s transfersda2: Command Queueing enabled | |
da5: 600.000MB/s transfers | |
da0: Command Queueing enabled | |
da2: 9537536MB (19532873728 512 byte sectors) | |
da1: Command Queueing enabled | |
da0: 9537536MB (19532873728 512 byte sectors) | |
da1: 9537536MB (19532873728 512 byte sectors) | |
da4: Command Queueing enabled | |
da5: Command Queueing enabled | |
da7 at mpr0 bus 0 scbus9 target 7 lun 0 | |
da6 at mpr0 bus 0 scbus9 target 6 lun 0 | |
da3 at mpr0 bus 0 scbus9 target 3 lun 0 | |
da5: 9537536MB (19532873728 512 byte sectors) | |
da7: da4: 9537536MB (19532873728 512 byte sectors) | |
da6: da3: <ATA WDC WD100EFAX-68 0A83> Fixed Direct Access SPC-4 SCSI device | |
<ATA WDC WD100EFAX-68 0A83> Fixed Direct Access SPC-4 SCSI device | |
uhub2: <ATA WDC WD100EFAX-68 0A83> Fixed Direct Access SPC-4 SCSI device | |
da7: Serial Number 1SHMBGKZ | |
da3: Serial Number 1SHM38BZ | |
da6: Serial Number 1SHJKKXZ | |
da3: 600.000MB/s transfers4 ports with 4 removable, self powered | |
da7: 600.000MB/s transfersda6: 600.000MB/s transfers | |
da3: Command Queueing enabled | |
da7: Command Queueing enabled | |
da3: 9537536MB (19532873728 512 byte sectors) | |
da6: Command Queueing enabled | |
da7: 9537536MB (19532873728 512 byte sectors) | |
da6: 9537536MB (19532873728 512 byte sectors) | |
Trying to mount root from zfs:zroot/ROOT/default []... | |
uhub0: 8 ports with 8 removable, self powered | |
uhub1: 8 ports with 8 removable, self powered | |
Root mount waiting for: usbus2 usbus0 | |
uhub3: 22 ports with 22 removable, self powered | |
ugen2.2: <Chicony USB Keyboard> at usbus2 | |
ukbd0 on uhub1 | |
ukbd0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 1> on usbus2 | |
kbd2 at ukbd0 | |
ugen0.2: <AsusTek Computer Inc. AURA Custom Human interface> at usbus0 | |
uhid0 on uhub3 | |
uhid0: <AsusTek Computer Inc. AURA Custom Human interface, class 0/0, rev 2.00/2.00, addr 1> on usbus0 | |
igb0: link state changed to UP | |
Accounting enabled | |
Accounting disabled |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment