Skip to content

Instantly share code, notes, and snippets.

@ptpt52
Created March 15, 2020 08:26
Show Gist options
  • Select an option

  • Save ptpt52/3c6b88b76e533aad6f2ffedf005641f3 to your computer and use it in GitHub Desktop.

Select an option

Save ptpt52/3c6b88b76e533aad6f2ffedf005641f3 to your computer and use it in GitHub Desktop.
Linux version 2.6.31 (root@ubuntu) (gcc version 4.3.3 (GCC) ) #2 Mon Sep 22 10:02:42 CST 2014
flash_size passed from bootloader = 16
arg 1: console=ttyS0,115200
arg 2: root=31:02
arg 3: rootfstype=jffs2
arg 4: init=/sbin/init
arg 5: mtdparts=ath-nor0:64k(u-boot),64k(u-boot-env),14080k(rootfs),2048k(uImage),64k(mib0),64k(ART)
arg 6: mem=64M
CPU revision is: 0001974c (MIPS 74Kc)
ath_sys_frequency: cpu srif ddr srif cpu 535 ddr 400 ahb 200
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00004000
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat 802a8790, node_mem_map 81000000
Normal zone: 128 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 16256 pages, LIFO batch:3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mtdparts=ath-nor0:64k(u-boot),64k(u-boot-env),14080k(rootfs),2048k(uImage),64k(mib0),64k(ART) mem=64M
PID hash table entries: 256 (order: 8, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 61936k/65536k available (2029k kernel code, 3524k reserved, 692k data, 140k init, 0k highmem)
NR_IRQS:128
plat_time_init: plat time init done
Calibrating delay loop... 267.26 BogoMIPS (lpj=534528)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
ATH GPIOC major 0
JFFS2 version 2.2 (ZLIB) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
fuse init (API version 7.12)
msgmni has been set to 121
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
console [ttyS0] enabled
brd: module loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
6 cmdlinepart partitions found on MTD device ath-nor0
Creating 6 MTD partitions on "ath-nor0":
0x000000000000-0x000000010000 : "u-boot"
0x000000010000-0x000000020000 : "u-boot-env"
0x000000020000-0x000000de0000 : "rootfs"
0x000000de0000-0x000000fe0000 : "uImage"
0x000000fe0000-0x000000ff0000 : "mib0"
0x000000ff0000-0x000001000000 : "ART"
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
u32 classifier
Performance counters on
input device check on
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
arch/mips/atheros/gpio.c (ath_simple_config_init) JUMPSTART_GPIO: 17
athwdt_init: Registering WDT failed -16
ath_otp_init: Registering OTP success
ath_clksw_init: Registering Clock Switch Interface success
VFS: Mounted root (jffs2 filesystem) readonly on device 31:2.
Freeing unused kernel memory: 140k freed
athrs_gmac: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
mac:0 Registering S27....
mac:1 Registering S27....
Setting Drop CRC Errors, Pause Frames and Length Error frames
ATHRS27: resetting s27
ATHRS27: s27 reset done
Setting Drop CRC Errors, Pause Frames and Length Error frames
device eth1 entered promiscuous mode
enet1 port0 up 100Mbps Full duplex
Setting Drop CRC Errors, Pause Frames and Length Error frames
br0: port 1(eth1) entering learning state
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Port Status 1c000004
ath-ehci ath-ehci.0: ATH EHCI
ath-ehci ath-ehci.0: new USB bus registered, assigned bus number 1
ehci_reset Intialize USB CONTROLLER in host mode: 13
ehci_reset Port Status 1c000000
ath-ehci ath-ehci.0: irq 3, io mem 0x1b000000
ehci_reset Intialize USB CONTROLLER in host mode: 13
ehci_reset Port Status 1c000000
ath-ehci ath-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usb 1-1: new high speed USB device using ath-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_account 0.1.21 : Piotr Gasidlo <quaker@barbara.eu.org>, http://code.google.com/p/ipt-account/
vol: 0x0
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
adf: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, 11D)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_ahb: 9.5.5.36 (Atheros/multi-bss)
__ath_attach: Set global_scn[0]
Enterprise mode: 0x00000000
Restoring Cal data from Flash
ath_get_caps[5914] rx chainmask mismatch actual 3 sc_chainmak 0
ath_get_caps[5889] tx chainmask mismatch actual 3 sc_chainmak 0
SC Callback Registration for wifi0
wifi0: Atheros 9340: mem=0xb8100000, irq=2
device ath0 entered promiscuous mode
br0: port 2(ath0) entering learning state
athr_gmac_ring_free Freeing at 0x83982800
athr_gmac_ring_free Freeing at 0x83972800
Setting Drop CRC Errors, Pause Frames and Length Error frames
scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB)
usb-storage: device scan complete
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
ieee80211_ioctl_siwmode: imr.ifm_active=1442432, new mode=3, valid=1
br0: port 2(ath0) entering disabled state
DEVICE IS DOWN ifname=ath0
DEVICE IS DOWN ifname=ath0
br0: port 2(ath0) entering learning state
**** drop_caches_sysctl_handler: all done timer added ...****
br0: port 1(eth1) entering forwarding state
br0: port 2(ath0) entering forwarding state
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment