ptpt52

Please choose the operation: 
   1: Load system code to SDRAM via TFTP. 
   2: Load system code then write to Flash via TFTP. 
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial. 
   9: Load Boot Loader code then write to Flash via TFTP. 
   r: Start TFTP recovery. 
default: 3
 0 

ptpt52

Linux version 2.6.31 (root@ubuntu) (gcc version 4.3.3 (GCC) ) #2 Mon Sep 22 10:02:42 CST 2014
flash_size passed from bootloader = 16
arg 1: console=ttyS0,115200
arg 2: root=31:02
arg 3: rootfstype=jffs2
arg 4: init=/sbin/init
arg 5: mtdparts=ath-nor0:64k(u-boot),64k(u-boot-env),14080k(rootfs),2048k(uImage),64k(mib0),64k(ART)
arg 6: mem=64M
CPU revision is: 0001974c (MIPS 74Kc)
ath_sys_frequency: cpu srif ddr srif cpu 535 ddr 400 ahb 200

ptpt52

===================================================================
                MT7621   stage1 code 10:33:11 (ASIC)
                CPU=50000000 HZ BUS=16666666 HZ
==================================================================
Change MPLL source from XTAL to CR...
do MEMPLL setting..
MEMPLL Config : 0x11100000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL4 FB_DL: 0x8, 1/0 = 640/384 21000000

ptpt52

[11932.255797] ------------[ cut here ]------------
[11932.256195] WARNING: CPU: 0 PID: 0 at target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-ipq40xx_generic/ath10k-ct-regular/ath10k-ct-2020-03-25-3d173a47/ath10k-5.4/txrx.c:134 ath10k_txrx_tx_unref+0x530/0x700 [ath10k_core]
[11932.259815] Invalid VHT rate, nss: 3  hw_rate: 15 ratecode: 255
[11932.279037] Modules linked in: qcserial pppoe ppp_async option l2tp_ppp cdc_mbim ath10k_pci ath10k_core ath usb_wwan sierra_net sierra rndis_host qmi_wwan pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_conntrack_pptp mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm cfg80211 cdc_ncm cdc_ether xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_socket xt_recent xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_iprange xt_ipp2p xt_iface xt_hl xt_helper xt_hashlimit xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_addrtype xt_TPROXY xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_IPMA

ptpt52

<3>[   60.056777] ksmbd: build_sess_rsp_extsec:1195: Invalid phase
<1>[   62.238419] CPU 1 Unable to handle kernel paging request at virtual address 00000010, epc == 8deb51a8, ra == 8de92388
<4>[   62.259579] Oops[#1]:
<4>[   62.264130] CPU: 1 PID: 31 Comm: kworker/1:1 Tainted: G         C        5.4.48 #0
<4>[   62.279295] Workqueue: ksmbd-io ksmbd_ipc_init [ksmbd]
<4>[   62.289515] $ 0   : 00000000 00000001 00006045 00000000
<4>[   62.299914] $ 4   : 8dc306e0 8f4dc004 00000000 8fd37dcc
<4>[   62.310324] $ 8   : 00000065 37313443 6c704038 65736165
<4>[   62.320730] $12   : 6db39ee1 f51ba518 eb8e147d f0fbb466
<4>[   62.331128] $16   : 8f4dc000 80690000 8dc3073c 8dec2318

ptpt52

<1>[413551.193474] CPU 0 Unable to handle kernel paging request at virtual address 0000011c, epc == 864ba9b0, ra == 864baa30
<4>[413551.204368] Oops[#1]:
<4>[413551.206773] CPU: 0 PID: 23200 Comm: kworker/u2:2 Not tainted 4.14.187 #0
<4>[413551.213825] Workqueue: phy1 ieee80211_scan_work [mac80211]
<4>[413551.219483] task: 87e74000 task.stack: 87c52000
<4>[413551.224161] $ 0   : 00000000 00000001 00000014 00000001
<4>[413551.229564] $ 4   : 00000001 860aff1c 00000006 00000000
<4>[413551.234958] $ 8   : 87e74000 86327878 00000931 00000000
<4>[413551.240353] $12   : 00485449 f5db1ba8 00000014 00000003
<4>[413551.245747] $16   : 860590b4 86058c00 860af460 00000000

ptpt52

<6>[   47.995557] br-lan: port 2(wlan0) entered forwarding state
<1>[61382.989176] CPU 0 Unable to handle kernel paging request at virtual address 000021b0, epc == 805d8a4c, ra == 805d8a44
<4>[61383.000775] Oops[#1]:
<4>[61383.003092] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.4.52 #0
<4>[61383.009202] Workqueue: events swconfig_led_work_func
<4>[61383.014151] $ 0   : 00000000 00000001 00000000 0000000a
<4>[61383.019355] $ 4   : 8fe63458 8fc39580 00000004 00000106
<4>[61383.024557] $ 8   : feff7273 00000018 80808080 fefefeff
<4>[61383.029758] $12   : 00000000 34b5e6c7 ca8f50bd 36190000
<4>[61383.034960] $16   : 00000001 8fd5ba61 80694d20 8f420088

ptpt52

<6>[  217.982535] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
<6>[  217.989269] br-lan: port 3(wlan1) entered blocking state
<6>[  217.994622] br-lan: port 3(wlan1) entered forwarding state
<1>[ 4861.603298] BUG: Bad page state in process swapper/2  pfn:0b068
<4>[ 4861.609254] page:8098dd00 refcount:-2 mapcount:0 mapping:00000000 index:0x0 compound_mapcount: 1
<4>[ 4861.618041] flags: 0x10000(head)
<4>[ 4861.621284] raw: 00010000 00000100 00000122 00000000 00000000 00000000 ffffffff fffffffe
<4>[ 4861.629372] page dumped because: nonzero _refcount
<4>[ 4861.634152] Modules linked in: ksmbd natcap qcserial pppoe ppp_async option l2tp_ppp cdc_mbim usb_wwan sierra_net sierra rndis_host qmi_wwan pptp pppox ppp_mppe ppp_generic mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 ipt_REJECT huawei_cdc_ncm cfg80211 cdc_ncm cdc_ether xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_socket xt_recent xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_ip

ptpt52

Bootloader by tuber V1.0                                                     
                                                                             
SoC:MediaTek MT7628                                                          
DRAM:  DDR2 Memory-Testing...131072K OK                     
128 MB                                                      
relocate_code Pointer at: 87f60000                          
flash manufacture id: ef, device id 40 18                   
find flash: W25Q128BV                                       
*** Warning - bad CRC, using default environment            

ptpt52

root@X-WRT:~# cat /sys/fs/pstore/dmesg-ramoops-0 
Oops#1 Part1
<5>[    0.000000] Linux version 5.4.65 (ptpt52@SC-GAME) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14035-c0d2a0966c)) #0 SMP Thu Sep 17 17:10:20 2020
<6>[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
<6>[    0.000000] printk: bootconsole [early0] enabled
<6>[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
<6>[    0.000000] MIPS: machine is T-CPE1200K V01
<6>[    0.000000] Initrd not found or empty - disabling initrd
<6>[    0.000000] VPE topology {2,2} total 4
<4>[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.