| /** | |
| * Copy this file to the root of the RxDB repository | |
| * so that the import paths are correct. | |
| */ | |
| import { | |
| createRxDatabase, | |
| randomCouchString, | |
| requestIdlePromise |
| # I bought the U3419W but the default refresh rate was set to 30hz. | |
| # I wanted 60 hz but HDMI 1.4 has a too low bandwidth for 3440x1440 with 60hz | |
| # Maximum is 2560x1080_60 | |
| # Set this with xrandr with these commands | |
| cvt 2560 1080 60 # Output of this is used in the --newmode command | |
| xrandr --newmode "2560x1080_60.00" 230.00 2560 2720 2992 3424 1080 1083 1093 1120 -hsync +vsync | |
| xrandr --addmode HDMI-1-2 "2560x1080_60.00" | |
| xrandr --output HDMI-1-2 --mode "2560x1080_60.00" # --left-of "eDP-1-1" |
| apt-get update | |
| apt-get upgrade -y | |
| apt-get dist-upgrade -y | |
| # choo choo! | |
| apt-get install sl -y | |
| apt-get install wget -y | |
| apt-get install curl -y | |
| apt-get install htop -y |
Error-Message:
Errors were encountered while processing: linux-image-extra-4.4.0-62-generic
Fix:
uname -a to check which kernel you currently usels /boot/ to show the kernels on the systemYou can now remove all not-used kernels.
For example if you have vmlinuz-4.4.0-51-generic on /boot/,
| # Corsair headsets will stuck the apps on your linux system. This is due to wrong usb-mapping. | |
| # thx to http://www.c0urier.net/2016/corsair-gaming-void-usb-rgb-linux-fun | |
| # 1. open terminal | |
| # 2. type this and search the line with your headset | |
| lsusb | |
| # Get the USB ID of the headset and add it to xorg.conf: |
| #@link http://askubuntu.com/questions/475764/docker-io-dns-doesnt-work-its-trying-to-use-8-8-8-8 | |
| nano /etc/default/docker | |
| docker_OPTS="--dns 127.0.0.1" | |
| nano /etc/NetworkManager/NetworkManager.conf | |
| #dns=dnsmasq | |
| service network-manager restart | |
| service docker restart |
| #run all via: | |
| # wget -O - https://gist.githubusercontent.com/pubkey/27083b667698b8d7b32bbcb0d413f78b/raw/6a2a75097112f1c4d25800cf03c7de025663fd17/new_linux.bash | bash | |
| apt-get update | |
| apt-get upgrade -y | |
| apt-get dist-upgrade -y | |
| # choo choo! |
| #show mounted drives | |
| df -h | |
| #overwrite drive with zeros | |
| sudo dd if=/dev/zero of=/dev/xxx bs=1M | |
| #regulary show state of last dd-command | |
| watch -n5 'sudo kill -USR1 $(pgrep ^dd)' | |
| #The mouse will suck on linux because of the programmable buttons. | |
| #This script will change the button-delegation so that the mouse doesn't stuck. | |
| #@link https://community.linuxmint.com/hardware/view/10217 | |
| sudo mkdir /etc/X11/xorg.conf.d | |
| sudo rm /etc/X11/xorg.conf.d/910-rat.conf | |
| # add the following to the file | |
| echo "Section \"InputClass\"" >> /etc/X11/xorg.conf.d/910-rat.conf |
| # 1. put this in any .sh script | |
| # 2. open 'gnome-session-properties' via cmd ( linux autostart ) | |
| # 3. add this script | |
| pkexec /usr/lib/gnome-settings-daemon/gsd-backlight-helper --set-brightness 100 |