pwrliang · May 14, 2018 00:47 · pwrliang · May 14, 2018 · pwrliang · May 14, 2018
diff --git a/install-wifi.sh b/install-wifi.sh
 #!/bin/bash
 #set -e

 # install-wifi - 19/10/2017 - by MrEngman.

 UPDATE_SELF=${UPDATE_SELF:-1}
 UPDATE_URI="http://downloads.fars-robotics.net/wifi-drivers/install-wifi"

 ROOT_PATH=${ROOT_PATH:-"/"}
 WORK_PATH=${WORK_PATH:-"${ROOT_PATH}/root"}
 OPTION=${1:-""}
 DRIVE=${2:-""}
 COMMIT=${3:-""}

 function update_self() {
        echo " *** Performing self-update"
        _tempFileName="$0.tmp"

        if ! curl -Ls --output "${_tempFileName}" "${UPDATE_URI}"; then
                echo " !!! Failed to download update for install-wifi!"
                echo " !!! Make sure you have ca-certificates installed and that the time is set correctly"
                exit 1
        fi

        OCTAL_MODE=$(stat -c '%a' "$0")
        if ! chmod ${OCTAL_MODE} "${_tempFileName}" ; then
                echo " !!! Failed: Error while trying to set mode on ${_tempFileName}"
                exit 1
        fi

        cat > "${WORK_PATH}/.updateScript.sh" << EOF
        if mv "${_tempFileName}" "$0"; then
                rm -- "\$0"
                exec env UPDATE_SELF=0 /bin/bash "$0" "${OPTION}" "${DRIVE}" "${COMMIT}"
        else
                echo " !!! Failed!"
        fi
 EOF

        echo " *** Relaunching after update"
        exec /bin/bash "${WORK_PATH}/.updateScript.sh"
 }

 display_help() {
 	echo "#"
 	echo "# usage:"
 	echo "#"
 	echo "# sudo install-wifi [[-h | --help] |"
 	echo "#		[-c | --check [driver] [rpi-update | commit_id]] |"
 	echo "#		[-u | --update [driver] [rpi-update | commit_id]] |"
 	echo "#		[driver [rpi-update | commit_id]]]"
 	echo "#"
 	echo "# options:"
 	echo "#  none - install the driver for the wifi module connected to the Pi for the currently running kernel."
 	echo "#"
 	echo "# -h|--help  - display usage."
 	echo "#"
 	echo "# -c|--check [driver] [option]  - check if a driver is available, does not install it."
 	echo "#			 driver - specific driver to check for, one of: 8188eu, 8192eu, 8812au, mt7601, mt7610 or mt7612"
 	echo "#	[option]:-	  blank - check driver for currently running kernel"
 	echo "#		     rpi-update - check driver for latest version of rpi-update"
 	echo "#		      commit-id - check driver for specific commit-id of rpi-update"
 	echo "#"
 	echo "# -u|--update [driver] [option] - update/install driver, can be used after running, but before rebooting, rpi-update"
 	echo "#                                 to update the driver to the one needed for the new kernel installed by rpi-update."
 	echo "#			 driver - specific driver to update/install, one of: 8188eu, 8192eu, 8812au, mt7601, mt7610 or mt7612"
 	echo "#	[option]:- 	  blank - update/install driver for currently running kernel"
 	echo "#		     rpi-update - update/install driver for latest version of rpi-update"
 	echo "#		      commit-id - update/install driver for specific commit-id of rpi-update"
 	echo "#"
 	echo "# driver [option] - install specific driver, enables installing the driver for a module not currently connected to"
 	echo "#		    the Pi, or installing a driver for a different module if you want to change your wifi module."
 	echo "#			 driver - specific driver to install, one of: 8188eu, 8192eu, 8812au, mt7601, mt7610 or mt7612"
 	echo "#	[option]:- 	  blank - update/install driver for currently running kernel"
 	echo "#		     rpi-update - update/install driver for latest version of rpi-update"
 	echo "#		      commit-id - update/install driver for specific commit-id of rpi-update"
 	echo "#"
 	read -n1 -r -p "Press any key to continue..."
 	echo
 	echo "#"
 	echo "# install-wifi examples:"
 	echo "#"
 	echo "#   Install/update the wifi driver for the wifi module connected to the Pi for the currently running kernel"
 	echo "#"
 	echo "#	sudo install-wifi"
 	echo "#"
 	echo "#   If you want to change your wifi module to one using a different driver that is compatible with this script"
 	echo "#   you can install the driver for the new wifi module, one of: 8188eu, 8192eu, 8812au, mt7601, mt7610 or mt7612"
 	echo "#   In this example it will install the 8192eu wifi module driver. After installing the driver shutdown the"
 	echo "#   Pi, remove the currently connected wifi module and connect the new 8192eu wifi module and restart your Pi"
 	echo "#   and it should start up with the new wifi adapter connected to your network."
 	echo "#"
 	echo "#	sudo install-wifi 8192eu - this will install the 8192eu module for the current kernel"
 	echo "#"
 	echo "#   if you want to run rpi-update, first check a driver is available before you update your code. If the check"
 	echo "#   indicates a driver is available run rpi-update to update the firmware/kernel and then before rebooting"
 	echo "#   update the wifi driver."
 	echo "#"
 	echo "#	sudo install-wifi -c rpi-update - check for driver if rpi-update is run."
 	echo "#	sudo rpi-update                 - if a driver is available you can run rpi-update to update firmware."
 	echo "#	sudo install-wifi -u rpi-update - then update the driver for the new kernel installed by rpi-update."
 	echo "#	sudo reboot		        - now reboot to update the kernel with the new wifi driver."
 	echo "#"
 	echo "#   if you want to run, say rpi-update b2f6c103e5 to install 3.18.7+ #755, first check a driver is available"
 	echo "#   before you update your code. Then, if a driver is available update the code, and then before rebooting"
 	echo "#   update the wifi driver."
 	echo "#"
 	echo "#	sudo install-wifi -c b2f6c103e5 - check for driver if rpi-update b2f6c103e5 is run to install kernel 3.18.7+ #755."
 	echo "#	sudo rpi-update b2f6c103e5      - if a driver is available you can run rpi-update b2f6c103e5 to update firmware."
 	echo "#	sudo install-wifi -u b2f6c103e5 - then update the driver for the new kernel installed by rpi-update b2f6c103e5."
 	echo "#	sudo reboot		        - now reboot to update the kernel with the new wifi driver."
 	echo "#"
 	echo "#   and finally, you can change the wifi module you are using and install the new driver for it as well as"
 	echo "#   running rpi-update to update the kernel, and assuming in this example the new adapter uses the 8812au"
 	echo "#   driver, using something like:"
 	echo "#"
 	echo "#	sudo install-wifi -c 8812au rpi-update - check for 8812au driver if rpi-update is run."
 	echo "#	sudo rpi-update	                       - if a driver is available you can run rpi-update to update firmware."
 	echo "#	sudo install-wifi -u 8812au rpi-update - install the 8812au driver for the new kernel installed by rpi-update."
 	echo "#	sudo halt			       - shutdown the Pi, replace the wifi adapter with the 8812au wifi adapter."
 	echo "#					       - restart the Pi with the new kernel and new 8812au wifi module."
 	echo "#"
 }

 fetch_driver() {
 	echo "Checking for a wifi module to determine the driver to install."
 	echo
 	echo -n "Your wifi module is "
 	lsusb > .lsusb
 	# check for rtl8188eu compatible driver
 	if   cat .lsusb | grep -i '2357:010C\|056E:4008\|2001:3311\|0DF6:0076\|2001:3310\|2001:330F\|07B8:8179\|0BDA:0179\|0BDA:8179' ; then
 		driver=8188eu
 	# check for rtl8812au compatible driver
 	elif cat .lsusb | grep -i '2357:010E\|0411:025D\|2019:AB32\|7392:A813\|056E:4007\|0411:0242\|0846:9052\|056E:400F\|056E:400E\|0E66:0023\|2001:3318\|2001:3314\|04BB:0953\|7392:A812\|7392:A811\|0BDA:0823\|0BDA:0820\|0BDA:A811\|0BDA:8822\|0BDA:0821\|0BDA:0811\|2357:010E\|2357:0122\|148F:9097\|20F4:805B\|050D:1109\|2357:010D\|2357:0103\|2357:0101\|13B1:003F\|2001:3316\|2001:3315\|07B8:8812\|2019:AB30\|1740:0100\|1058:0632\|2001:3313\|0586:3426\|0E66:0022\|0B05:17D2\|0409:0408\|0789:016E\|04BB:0952\|0DF6:0074\|7392:A822\|2001:330E\|050D:1106\|0BDA:881C\|0BDA:881B\|0BDA:881A\|0BDA:8812' ; then
 		driver=8812au
 	# check for rtl8192eu compatible driver
 	elif cat .lsusb | grep -i '2019:AB33\|2357:0109\|2357:0108\|2357:0107\|2001:3319\|0BDA:818C\|0BDA:818B' ; then
 		driver=8192eu
 	# check for mt7601Usta compatible driver
 	elif cat .lsusb | grep -i '148F:7650\|0B05:17D3\|0E8D:760A\|0E8D:760B\|13D3:3431\|13D3:3434\|148F:6370\|148F:7601\|148F:760A\|148F:760B\|148F:760C\|148F:760D\|2001:3D04\|2717:4106\|2955:0001\|2955:1001\|2955:1003\|2A5F:1000\|7392:7710' ; then
 		driver=mt7601
 	# check for mt7610u compatible driver
        elif cat .lsusb | grep -i '0E8D:7650\|0E8D:7630\|2357:0105\|0DF6:0079\|0BDB:1011\|7392:C711\|20F4:806B\|293C:5702\|057C:8502\|04BB:0951\|07B8:7610\|0586:3425\|2001:3D02\|2019:AB31\|0DF6:0075\|0B05:17DB\|0B05:17D1\|148F:760A\|148F:761A\|7392:B711\|7392:A711\|0E8D:7610\|13B1:003E\|148F:7610' ; then
 		driver=mt7610
 	# check for mt7612u compatible driver
 	elif cat .lsusb | grep -i '0E8D:7662\|0E8D:7632\|0E8D:7612\|0B05:17C9\|045E:02E6\|0B05:17EB\|0846:9053\|0B05:180B\|0846:9014\|7392:B711\|057C:8503\|0E8D:761B' ; then
 		driver=mt7612
 	fi

 	if [[ ! $driver ]] ; then
 		echo "unrecognised."
 		echo
 		echo "**** Unable to identify your wifi module ****"
 		echo
 		echo "The script only works for wifi modules using the rtl8188eu, rtl8192eu, rtl8812au, mt7601, mt7610 and mt7612 drivers."
 		echo
 		echo "Looking for your wifi module the script detected the following USB devices:-"
 		echo
 		cat .lsusb
 		echo
 		echo "If you are certain your module uses one of the drivers the script installs check the output of command"
 		echo "'lsusb' shows your wifi module. If lsusb shows your wifi module try running the script again. If the"
 		echo "script fails to detect your wifi module again the driver may need updating to add your module USB id."
 		echo
 		echo "If lsusb does not show your wifi module you will need to resolve that issue before the script can be"
 		echo "used to install the driver you need."
 		echo
 		exit 1
 	else
 		echo
 		echo "And it uses the $driver driver."
 		echo
 	fi
 }

 check_driver() {

 	if [[ $kernelcommit == "rpi-update" ]] ; then
 		rpi_firmware_commit_id=master
 	elif [[ $kernelcommit ]] ; then
 		rpi_firmware_commit_id=$kernelcommit
 	fi

 	if [[ $kernelcommit ]] ; then
 		# check if Pi2 B or earlier version of Pi and select the relevant kernel image
 		if (grep -Fq BCM2709 /proc/cpuinfo) ; then
 			pi=2
 			image=kernel7.img
 			uname=uname_string7
                elif (grep -Fq ARMv7 /proc/cpuinfo) ; then
                        pi=2
                        image=kernel7.img
 			uname=uname_string7
 		elif (grep -Fq BCM2708 /proc/cpuinfo) ; then
 			pi=1
 			image=kernel.img
 			uname=uname_string
                elif (grep -Fq ARMv6 /proc/cpuinfo) ; then
                        pi=1
                        image=kernel.img
 			uname=uname_string
 		else
 			echo "Processor type unknown - you do not appear to be running this script on a Raspberry Pi. Exiting the script"
 			exit 1
 		fi

 		echo -n "Please wait ... checking the kernel revision and build you will have after running command 'sudo rpi-update"
 		if [[ $kernelcommit != "rpi-update" ]] ; then
 			echo " $kernelcommit'."
 		else
 			echo "'."
 		fi

 # download uname string if it exists
 		if ! (wget -q https://github.com/Hexxeh/rpi-firmware/raw/$rpi_firmware_commit_id/$uname -O .uname_string) ; then
 		
 		
 # download the relevant kernel image if uname_string doesn't exist
 			if ! (wget -q https://github.com/Hexxeh/rpi-firmware/raw/$rpi_firmware_commit_id/$image -O .kernel) ; then
 				echo "Invalid commit-id, kernel not available for your version of the Pi, Pi $pi."
 				exit 1
 			fi

 # extract uname_string from kernel image

 			strings -n 10 .kernel | grep "Linux version" > .uname_string

 # create kernel image with uname_string if the current kernel version doesn't include it
 			if [ ! -s .uname_string ] ; then
 				if [ ! -f /usr/bin/mkknlimg1 ] ; then
 					if [ -f /usr/bin/mkknlimg ] ; then
 						rm /usr/bin/mkknlimg
 					fi
 					wget -q http://www.fars-robotics.net/mkknlimg1 -O /usr/bin/mkknlimg1
 					chmod +x /usr/bin/mkknlimg1
 				fi
 				mkknlimg1 .kernel .kernel1
 				mv .kernel1 .kernel
 				strings -n 10 .kernel | grep "Linux version" > .uname_string
 			fi
 		fi

 		kernel=$(cat .uname_string | awk '{print $3}' | tr -d '+')
 		build=$(grep -Po '(?<=#)[^[]*' .uname_string | awk '{print $1}')

 		echo
 		if [[ $kernelcommit == "rpi-update" ]] ; then
 			echo -n "Running command 'sudo rpi-update"
 		elif [[ $kernelcommit ]] ; then
 			echo -n "Running command 'sudo rpi-update $kernelcommit"
 		fi
 		echo "' will load:"
 		echo
 		echo "        kernel revision = $kernel+"
 		echo "        kernel build    = #$build"
 		echo
 	fi

 	echo -n "Checking for a $driver wifi driver module"
 	if [[ $kernelcommit ]] ; then
 		if [[ $kernelcommit == "rpi-update" ]] ; then
 			echo " if you run command 'sudo rpi-update'."
 		else
 			echo " if you run command 'sudo rpi-update $rpi_firmware_commit_id'."
 		fi
 	else
 		echo " for your current kernel."
 	fi

 	if (wget --spider -o .wgetlog http://downloads.fars-robotics.net/wifi-drivers/$driver\-drivers/$driver\-$kernel\-$build.tar.gz) ; then
 		echo "There is a driver module available for this kernel revision."
 	else
 		if cat .wgetlog | grep -iq "404 Not Found" ; then
 			echo "A driver does not yet exist for this update."
 		else
 			echo "The script cannot access fars-robotics to check a driver is available."
 		fi

 	exit 2
 	fi
 }

 install_driver() {

 	echo "Downloading the $driver driver."

 	if (wget -q http://downloads.fars-robotics.net/wifi-drivers/$driver\-drivers/$driver\-$kernel\-$build.tar.gz -O wifi-driver.tar.gz) ; then
 		echo "Installing the $driver driver."
 		echo
 		tar xzf wifi-driver.tar.gz
 		rm install.sh > /dev/null 2>&1

 		module_dir="/lib/modules/$kernel+/kernel/drivers/net/wireless"
 		
 		if [ -f RT2870STA.dat ] ; then
 			mkdir -p /etc/Wireless/RT2870STA/
 			chown root:root RT2870STA.dat
 			mv RT2870STA.dat /etc/Wireless/RT2870STA/
 		
 			if [ -f 95-ralink.rules ] ; then
 				mv 95-ralink.rules /etc/udev/rules.d/
 			elif [ -f /etc/udev/rules.d/95-ralink.rules ] ; then
 				rm /etc/udev/rules.d/95-ralink.rules
 			fi
 		fi
 		
 		if [ -f $driver.conf ] ; then
 			cp $driver.conf /etc/modprobe.d/.
 			rm $driver.conf
 		fi

 		if [ -f mt7662u_sta.ko ] ; then
 			rm $module_dir/mt7612u* > /dev/null 2>&1
 			rm /lib/firmware/mt7662* > /dev/null 2>&1
 			driver1=mt7662u_sta
 			if ! grep -q "coherent_pool=" /boot/cmdline.txt ; then
 				echo "adding 'coherent_pool=2M' to file /boot/cmdline.txt"
 				sed -i 's/$/ coherent_pool=2M/' /boot/cmdline.txt
 			else
 				echo "'coherent_pool=' already intalled in file /boot/cmdline.txt"
 			fi
 		elif [ -f mt7612u.ko ] ; then
 			rm $module_dir/mt7662u* > /dev/null 2>&1
 			driver1=mt7612u
 			chown root:root *.bin
 			mv *.bin /lib/firmware
 		elif [ -f mt7610u_sta.ko ] ; then
 			rm $module_dir/mt7610u* > /dev/null 2>&1
 			driver1=mt7610u_sta
 		elif [ -f mt7610u.ko ] ; then
 			rm $module_dir/mt7610u* > /dev/null 2>&1
 			driver1=mt7610u
 			chown root:root *.bin
 			mv *.bin /lib/firmware
 		elif [ -f mt7601Usta.ko ] ; then
 			driver1=mt7601Usta
 		elif [ -f 8812au.ko ] ; then
 			driver1=8812au
 		elif [ -f 8192eu.ko ] ; then
 			driver1=8192eu
 		elif [ -f 8188eu.ko ] ; then
 			driver1=8188eu
 		fi

 		echo "Installing driver module $driver1.ko."
 		install -p -m 644 $driver1.ko $module_dir
 		depmod $kernel+

 		rm $driver1.ko

                if [[ $kernelcommit ]] ; then
 			echo "Syncing changes to disk"
 			sync
                        echo "You will need to reboot to load the driver."
 		elif (lsmod | grep $driver1 > /dev/null) ; then
 			echo "Syncing changes to disk"
 			sync
 			echo "A version of the $driver driver is already loaded and running."
 			echo "You will need to reboot to load the new driver, $driver1.ko."
 		else
 			echo "Loading and running the $driver driver, $driver1.ko."
 			modprobe $driver1
 		fi
 		
 	else
 		echo
 		echo "A driver does not yet exist for this kernel."
 	fi
 }

 display_current() {
 	echo
 	echo "Your current kernel revision = $kernel+"
 	echo "Your current kernel build    = #$build"
 	echo
 }

 tmpdir=$(mktemp -d)
 trap "\rm -rf $tmpdir" EXIT
 cd $tmpdir

 #initialise some variables
 command=$0
 option=$1
 kernelcommit=$2

 driver=""
 kernel=$(uname -r | tr -d '+')
 build=${build:-$(uname -v | awk '{print $1}' | tr -d '#')}

 if [[ ${EUID} -ne 0 ]]; then
        echo " !!! This tool must be run as root"
        exit 1
 fi

 echo
 echo " *** Raspberry Pi wifi driver installer by MrEngman."

 if [[ ${UPDATE_SELF} -ne 0 ]]; then
        update_self
 fi

 #echo
 #echo "This script installs drivers for Raspbian."

 #if  ! cat /etc/os-release | grep -iq 'ID=raspbian' ; then
 #	echo "You do not appear to be using a Raspbian OS so exiting the script."
 #	echo
 #	exit 2
 #fi

 case "$1" in
 	8188eu|8192eu|8812au|mt7601|mt7610|mt7612)
 		driver=$1
 		display_current
 		check_driver
 		install_driver
 		;;
 	-c|--check)
 		case "$2" in
 			8188eu|8192eu|8812au|mt7601|mt7610|mt7612)
 				driver=$2
 				kernelcommit=$3
 				;;
 		esac
 		display_current
 		if [ ! $driver ] ; then
 			fetch_driver
 		fi
 		check_driver
 		;;
 	-u|--update)
 		case "$2" in
 			8188eu|8192eu|8812au|mt7601|mt7610|mt7612)
 				driver=$2
 				kernelcommit=$3
 				;;
 		esac
 		display_current
 		if [ ! $driver ] ; then
 			fetch_driver
 		fi
 		check_driver
 		install_driver
 		;;
 	-h|--help)
 		display_help
 		exit 0
 		;;
 	"")
 		display_current
 		fetch_driver
 		check_driver
 		install_driver
 		;; # proceed to install
 	*)
 		echo "unknown command: $1" >&2
 		~/$command --help
 		exit 1
 		;;
 esac

 exit 0
	#!/bin/bash
	#set -e

	# install-wifi - 19/10/2017 - by MrEngman.

	UPDATE_SELF=${UPDATE_SELF:-1}
	UPDATE_URI="http://downloads.fars-robotics.net/wifi-drivers/install-wifi"

	ROOT_PATH=${ROOT_PATH:-"/"}
	WORK_PATH=${WORK_PATH:-"${ROOT_PATH}/root"}
	OPTION=${1:-""}
	DRIVE=${2:-""}
	COMMIT=${3:-""}

	function update_self() {
	echo " *** Performing self-update"
	_tempFileName="$0.tmp"

	if ! curl -Ls --output "${_tempFileName}" "${UPDATE_URI}"; then
	echo " !!! Failed to download update for install-wifi!"
	echo " !!! Make sure you have ca-certificates installed and that the time is set correctly"
	exit 1
	fi

	OCTAL_MODE=$(stat -c '%a' "$0")
	if ! chmod ${OCTAL_MODE} "${_tempFileName}" ; then
	echo " !!! Failed: Error while trying to set mode on ${_tempFileName}"
	exit 1
	fi

	cat > "${WORK_PATH}/.updateScript.sh" << EOF
	if mv "${_tempFileName}" "$0"; then
	rm -- "\$0"
	exec env UPDATE_SELF=0 /bin/bash "$0" "${OPTION}" "${DRIVE}" "${COMMIT}"
	else
	echo " !!! Failed!"
	fi
	EOF

	echo " *** Relaunching after update"
	exec /bin/bash "${WORK_PATH}/.updateScript.sh"
	}

	display_help() {
	echo "#"
	echo "# usage:"
	echo "#"
	echo "# sudo install-wifi [[-h \| --help] \|"
	echo "# [-c \| --check [driver] [rpi-update \| commit_id]] \|"
	echo "# [-u \| --update [driver] [rpi-update \| commit_id]] \|"
	echo "# [driver [rpi-update \| commit_id]]]"
	echo "#"
	echo "# options:"
	echo "# none - install the driver for the wifi module connected to the Pi for the currently running kernel."
	echo "#"
	echo "# -h\|--help - display usage."
	echo "#"
	echo "# -c\|--check [driver] [option] - check if a driver is available, does not install it."
	echo "# driver - specific driver to check for, one of: 8188eu, 8192eu, 8812au, mt7601, mt7610 or mt7612"
	echo "# [option]:- blank - check driver for currently running kernel"
	echo "# rpi-update - check driver for latest version of rpi-update"
	echo "# commit-id - check driver for specific commit-id of rpi-update"
	echo "#"
	echo "# -u\|--update [driver] [option] - update/install driver, can be used after running, but before rebooting, rpi-update"
	echo "# to update the driver to the one needed for the new kernel installed by rpi-update."
	echo "# driver - specific driver to update/install, one of: 8188eu, 8192eu, 8812au, mt7601, mt7610 or mt7612"
	echo "# [option]:- blank - update/install driver for currently running kernel"
	echo "# rpi-update - update/install driver for latest version of rpi-update"
	echo "# commit-id - update/install driver for specific commit-id of rpi-update"
	echo "#"
	echo "# driver [option] - install specific driver, enables installing the driver for a module not currently connected to"
	echo "# the Pi, or installing a driver for a different module if you want to change your wifi module."
	echo "# driver - specific driver to install, one of: 8188eu, 8192eu, 8812au, mt7601, mt7610 or mt7612"
	echo "# [option]:- blank - update/install driver for currently running kernel"
	echo "# rpi-update - update/install driver for latest version of rpi-update"
	echo "# commit-id - update/install driver for specific commit-id of rpi-update"
	echo "#"
	read -n1 -r -p "Press any key to continue..."
	echo
	echo "#"
	echo "# install-wifi examples:"
	echo "#"
	echo "# Install/update the wifi driver for the wifi module connected to the Pi for the currently running kernel"
	echo "#"
	echo "# sudo install-wifi"
	echo "#"
	echo "# If you want to change your wifi module to one using a different driver that is compatible with this script"
	echo "# you can install the driver for the new wifi module, one of: 8188eu, 8192eu, 8812au, mt7601, mt7610 or mt7612"
	echo "# In this example it will install the 8192eu wifi module driver. After installing the driver shutdown the"
	echo "# Pi, remove the currently connected wifi module and connect the new 8192eu wifi module and restart your Pi"
	echo "# and it should start up with the new wifi adapter connected to your network."
	echo "#"
	echo "# sudo install-wifi 8192eu - this will install the 8192eu module for the current kernel"
	echo "#"
	echo "# if you want to run rpi-update, first check a driver is available before you update your code. If the check"
	echo "# indicates a driver is available run rpi-update to update the firmware/kernel and then before rebooting"
	echo "# update the wifi driver."
	echo "#"
	echo "# sudo install-wifi -c rpi-update - check for driver if rpi-update is run."
	echo "# sudo rpi-update - if a driver is available you can run rpi-update to update firmware."
	echo "# sudo install-wifi -u rpi-update - then update the driver for the new kernel installed by rpi-update."
	echo "# sudo reboot - now reboot to update the kernel with the new wifi driver."
	echo "#"
	echo "# if you want to run, say rpi-update b2f6c103e5 to install 3.18.7+ #755, first check a driver is available"
	echo "# before you update your code. Then, if a driver is available update the code, and then before rebooting"
	echo "# update the wifi driver."
	echo "#"
	echo "# sudo install-wifi -c b2f6c103e5 - check for driver if rpi-update b2f6c103e5 is run to install kernel 3.18.7+ #755."
	echo "# sudo rpi-update b2f6c103e5 - if a driver is available you can run rpi-update b2f6c103e5 to update firmware."
	echo "# sudo install-wifi -u b2f6c103e5 - then update the driver for the new kernel installed by rpi-update b2f6c103e5."
	echo "# sudo reboot - now reboot to update the kernel with the new wifi driver."
	echo "#"
	echo "# and finally, you can change the wifi module you are using and install the new driver for it as well as"
	echo "# running rpi-update to update the kernel, and assuming in this example the new adapter uses the 8812au"
	echo "# driver, using something like:"
	echo "#"
	echo "# sudo install-wifi -c 8812au rpi-update - check for 8812au driver if rpi-update is run."
	echo "# sudo rpi-update - if a driver is available you can run rpi-update to update firmware."
	echo "# sudo install-wifi -u 8812au rpi-update - install the 8812au driver for the new kernel installed by rpi-update."
	echo "# sudo halt - shutdown the Pi, replace the wifi adapter with the 8812au wifi adapter."
	echo "# - restart the Pi with the new kernel and new 8812au wifi module."
	echo "#"
	}

	fetch_driver() {
	echo "Checking for a wifi module to determine the driver to install."
	echo
	echo -n "Your wifi module is "
	lsusb > .lsusb
	# check for rtl8188eu compatible driver
	if cat .lsusb \| grep -i '2357:010C\\|056E:4008\\|2001:3311\\|0DF6:0076\\|2001:3310\\|2001:330F\\|07B8:8179\\|0BDA:0179\\|0BDA:8179' ; then
	driver=8188eu
	# check for rtl8812au compatible driver
	elif cat .lsusb \| grep -i '2357:010E\\|0411:025D\\|2019:AB32\\|7392:A813\\|056E:4007\\|0411:0242\\|0846:9052\\|056E:400F\\|056E:400E\\|0E66:0023\\|2001:3318\\|2001:3314\\|04BB:0953\\|7392:A812\\|7392:A811\\|0BDA:0823\\|0BDA:0820\\|0BDA:A811\\|0BDA:8822\\|0BDA:0821\\|0BDA:0811\\|2357:010E\\|2357:0122\\|148F:9097\\|20F4:805B\\|050D:1109\\|2357:010D\\|2357:0103\\|2357:0101\\|13B1:003F\\|2001:3316\\|2001:3315\\|07B8:8812\\|2019:AB30\\|1740:0100\\|1058:0632\\|2001:3313\\|0586:3426\\|0E66:0022\\|0B05:17D2\\|0409:0408\\|0789:016E\\|04BB:0952\\|0DF6:0074\\|7392:A822\\|2001:330E\\|050D:1106\\|0BDA:881C\\|0BDA:881B\\|0BDA:881A\\|0BDA:8812' ; then
	driver=8812au
	# check for rtl8192eu compatible driver
	elif cat .lsusb \| grep -i '2019:AB33\\|2357:0109\\|2357:0108\\|2357:0107\\|2001:3319\\|0BDA:818C\\|0BDA:818B' ; then
	driver=8192eu
	# check for mt7601Usta compatible driver
	elif cat .lsusb \| grep -i '148F:7650\\|0B05:17D3\\|0E8D:760A\\|0E8D:760B\\|13D3:3431\\|13D3:3434\\|148F:6370\\|148F:7601\\|148F:760A\\|148F:760B\\|148F:760C\\|148F:760D\\|2001:3D04\\|2717:4106\\|2955:0001\\|2955:1001\\|2955:1003\\|2A5F:1000\\|7392:7710' ; then
	driver=mt7601
	# check for mt7610u compatible driver
	elif cat .lsusb \| grep -i '0E8D:7650\\|0E8D:7630\\|2357:0105\\|0DF6:0079\\|0BDB:1011\\|7392:C711\\|20F4:806B\\|293C:5702\\|057C:8502\\|04BB:0951\\|07B8:7610\\|0586:3425\\|2001:3D02\\|2019:AB31\\|0DF6:0075\\|0B05:17DB\\|0B05:17D1\\|148F:760A\\|148F:761A\\|7392:B711\\|7392:A711\\|0E8D:7610\\|13B1:003E\\|148F:7610' ; then
	driver=mt7610
	# check for mt7612u compatible driver
	elif cat .lsusb \| grep -i '0E8D:7662\\|0E8D:7632\\|0E8D:7612\\|0B05:17C9\\|045E:02E6\\|0B05:17EB\\|0846:9053\\|0B05:180B\\|0846:9014\\|7392:B711\\|057C:8503\\|0E8D:761B' ; then
	driver=mt7612
	fi

	if [[ ! $driver ]] ; then
	echo "unrecognised."
	echo
	echo "** Unable to identify your wifi module **"
	echo
	echo "The script only works for wifi modules using the rtl8188eu, rtl8192eu, rtl8812au, mt7601, mt7610 and mt7612 drivers."
	echo
	echo "Looking for your wifi module the script detected the following USB devices:-"
	echo
	cat .lsusb
	echo
	echo "If you are certain your module uses one of the drivers the script installs check the output of command"
	echo "'lsusb' shows your wifi module. If lsusb shows your wifi module try running the script again. If the"
	echo "script fails to detect your wifi module again the driver may need updating to add your module USB id."
	echo
	echo "If lsusb does not show your wifi module you will need to resolve that issue before the script can be"
	echo "used to install the driver you need."
	echo
	exit 1
	else
	echo
	echo "And it uses the $driver driver."
	echo
	fi
	}

	check_driver() {

	if [[ $kernelcommit == "rpi-update" ]] ; then
	rpi_firmware_commit_id=master
	elif [[ $kernelcommit ]] ; then
	rpi_firmware_commit_id=$kernelcommit
	fi

	if [[ $kernelcommit ]] ; then
	# check if Pi2 B or earlier version of Pi and select the relevant kernel image
	if (grep -Fq BCM2709 /proc/cpuinfo) ; then
	pi=2
	image=kernel7.img
	uname=uname_string7
	elif (grep -Fq ARMv7 /proc/cpuinfo) ; then
	pi=2
	image=kernel7.img
	uname=uname_string7
	elif (grep -Fq BCM2708 /proc/cpuinfo) ; then
	pi=1
	image=kernel.img
	uname=uname_string
	elif (grep -Fq ARMv6 /proc/cpuinfo) ; then
	pi=1
	image=kernel.img
	uname=uname_string
	else
	echo "Processor type unknown - you do not appear to be running this script on a Raspberry Pi. Exiting the script"
	exit 1
	fi

	echo -n "Please wait ... checking the kernel revision and build you will have after running command 'sudo rpi-update"
	if [[ $kernelcommit != "rpi-update" ]] ; then
	echo " $kernelcommit'."
	else
	echo "'."
	fi

	# download uname string if it exists
	if ! (wget -q https://github.com/Hexxeh/rpi-firmware/raw/$rpi_firmware_commit_id/$uname -O .uname_string) ; then


	# download the relevant kernel image if uname_string doesn't exist
	if ! (wget -q https://github.com/Hexxeh/rpi-firmware/raw/$rpi_firmware_commit_id/$image -O .kernel) ; then
	echo "Invalid commit-id, kernel not available for your version of the Pi, Pi $pi."
	exit 1
	fi

	# extract uname_string from kernel image

	strings -n 10 .kernel \| grep "Linux version" > .uname_string

	# create kernel image with uname_string if the current kernel version doesn't include it
	if [ ! -s .uname_string ] ; then
	if [ ! -f /usr/bin/mkknlimg1 ] ; then
	if [ -f /usr/bin/mkknlimg ] ; then
	rm /usr/bin/mkknlimg
	fi
	wget -q http://www.fars-robotics.net/mkknlimg1 -O /usr/bin/mkknlimg1
	chmod +x /usr/bin/mkknlimg1
	fi
	mkknlimg1 .kernel .kernel1
	mv .kernel1 .kernel
	strings -n 10 .kernel \| grep "Linux version" > .uname_string
	fi
	fi

	kernel=$(cat .uname_string \| awk '{print $3}' \| tr -d '+')
	build=$(grep -Po '(?<=#)[^[]*' .uname_string \| awk '{print $1}')

	echo
	if [[ $kernelcommit == "rpi-update" ]] ; then
	echo -n "Running command 'sudo rpi-update"
	elif [[ $kernelcommit ]] ; then
	echo -n "Running command 'sudo rpi-update $kernelcommit"
	fi
	echo "' will load:"
	echo
	echo " kernel revision = $kernel+"
	echo " kernel build = #$build"
	echo
	fi

	echo -n "Checking for a $driver wifi driver module"
	if [[ $kernelcommit ]] ; then
	if [[ $kernelcommit == "rpi-update" ]] ; then
	echo " if you run command 'sudo rpi-update'."
	else
	echo " if you run command 'sudo rpi-update $rpi_firmware_commit_id'."
	fi
	else
	echo " for your current kernel."
	fi

	if (wget --spider -o .wgetlog http://downloads.fars-robotics.net/wifi-drivers/$driver\-drivers/$driver\-$kernel\-$build.tar.gz) ; then
	echo "There is a driver module available for this kernel revision."
	else
	if cat .wgetlog \| grep -iq "404 Not Found" ; then
	echo "A driver does not yet exist for this update."
	else
	echo "The script cannot access fars-robotics to check a driver is available."
	fi

	exit 2
	fi
	}

	install_driver() {

	echo "Downloading the $driver driver."

	if (wget -q http://downloads.fars-robotics.net/wifi-drivers/$driver\-drivers/$driver\-$kernel\-$build.tar.gz -O wifi-driver.tar.gz) ; then
	echo "Installing the $driver driver."
	echo
	tar xzf wifi-driver.tar.gz
	rm install.sh > /dev/null 2>&1

	module_dir="/lib/modules/$kernel+/kernel/drivers/net/wireless"

	if [ -f RT2870STA.dat ] ; then
	mkdir -p /etc/Wireless/RT2870STA/
	chown root:root RT2870STA.dat
	mv RT2870STA.dat /etc/Wireless/RT2870STA/

	if [ -f 95-ralink.rules ] ; then
	mv 95-ralink.rules /etc/udev/rules.d/
	elif [ -f /etc/udev/rules.d/95-ralink.rules ] ; then
	rm /etc/udev/rules.d/95-ralink.rules
	fi
	fi

	if [ -f $driver.conf ] ; then
	cp $driver.conf /etc/modprobe.d/.
	rm $driver.conf
	fi

	if [ -f mt7662u_sta.ko ] ; then
	rm $module_dir/mt7612u* > /dev/null 2>&1
	rm /lib/firmware/mt7662* > /dev/null 2>&1
	driver1=mt7662u_sta
	if ! grep -q "coherent_pool=" /boot/cmdline.txt ; then
	echo "adding 'coherent_pool=2M' to file /boot/cmdline.txt"
	sed -i 's/$/ coherent_pool=2M/' /boot/cmdline.txt
	else
	echo "'coherent_pool=' already intalled in file /boot/cmdline.txt"
	fi
	elif [ -f mt7612u.ko ] ; then
	rm $module_dir/mt7662u* > /dev/null 2>&1
	driver1=mt7612u
	chown root:root *.bin
	mv *.bin /lib/firmware
	elif [ -f mt7610u_sta.ko ] ; then
	rm $module_dir/mt7610u* > /dev/null 2>&1
	driver1=mt7610u_sta
	elif [ -f mt7610u.ko ] ; then
	rm $module_dir/mt7610u* > /dev/null 2>&1
	driver1=mt7610u
	chown root:root *.bin
	mv *.bin /lib/firmware
	elif [ -f mt7601Usta.ko ] ; then
	driver1=mt7601Usta
	elif [ -f 8812au.ko ] ; then
	driver1=8812au
	elif [ -f 8192eu.ko ] ; then
	driver1=8192eu
	elif [ -f 8188eu.ko ] ; then
	driver1=8188eu
	fi

	echo "Installing driver module $driver1.ko."
	install -p -m 644 $driver1.ko $module_dir
	depmod $kernel+

	rm $driver1.ko

	if [[ $kernelcommit ]] ; then
	echo "Syncing changes to disk"
	sync
	echo "You will need to reboot to load the driver."
	elif (lsmod \| grep $driver1 > /dev/null) ; then
	echo "Syncing changes to disk"
	sync
	echo "A version of the $driver driver is already loaded and running."
	echo "You will need to reboot to load the new driver, $driver1.ko."
	else
	echo "Loading and running the $driver driver, $driver1.ko."
	modprobe $driver1
	fi

	else
	echo
	echo "A driver does not yet exist for this kernel."
	fi
	}

	display_current() {
	echo
	echo "Your current kernel revision = $kernel+"
	echo "Your current kernel build = #$build"
	echo
	}

	tmpdir=$(mktemp -d)
	trap "\rm -rf $tmpdir" EXIT
	cd $tmpdir

	#initialise some variables
	command=$0
	option=$1
	kernelcommit=$2

	driver=""
	kernel=$(uname -r \| tr -d '+')
	build=${build:-$(uname -v \| awk '{print $1}' \| tr -d '#')}

	if [[ ${EUID} -ne 0 ]]; then
	echo " !!! This tool must be run as root"
	exit 1
	fi

	echo
	echo " *** Raspberry Pi wifi driver installer by MrEngman."

	if [[ ${UPDATE_SELF} -ne 0 ]]; then
	update_self
	fi

	#echo
	#echo "This script installs drivers for Raspbian."

	#if ! cat /etc/os-release \| grep -iq 'ID=raspbian' ; then
	# echo "You do not appear to be using a Raspbian OS so exiting the script."
	# echo
	# exit 2
	#fi

	case "$1" in
	8188eu\|8192eu\|8812au\|mt7601\|mt7610\|mt7612)
	driver=$1
	display_current
	check_driver
	install_driver
	;;
	-c\|--check)
	case "$2" in
	8188eu\|8192eu\|8812au\|mt7601\|mt7610\|mt7612)
	driver=$2
	kernelcommit=$3
	;;
	esac
	display_current
	if [ ! $driver ] ; then
	fetch_driver
	fi
	check_driver
	;;
	-u\|--update)
	case "$2" in
	8188eu\|8192eu\|8812au\|mt7601\|mt7610\|mt7612)
	driver=$2
	kernelcommit=$3
	;;
	esac
	display_current
	if [ ! $driver ] ; then
	fetch_driver
	fi
	check_driver
	install_driver
	;;
	-h\|--help)
	display_help
	exit 0
	;;
	"")
	display_current
	fetch_driver
	check_driver
	install_driver
	;; # proceed to install
	*)
	echo "unknown command: $1" >&2
	~/$command --help
	exit 1
	;;
	esac

	exit 0