kitty.conf

# vim:fileencoding=utf-8:ft=conf

# You can include secondary config files via the "include" directive.
# If you use a relative path for include, it is resolved with respect to the
# location of the current config file. Note that environment variables
# are expanded, so ${USER}.conf becomes name.conf if USER=name
# For example:
# include other.conf

# Fonts {{{
# Font family. You can also specify different fonts for the
# bold/italic/bold-italic variants. By default they are derived automatically,
# by the OSes font system. Setting them manually is useful for font families
# that have many weight variants like Book, Medium, Thick, etc. For example:
# font_family Operator Mono Book
# bold_font Operator Mono Medium
# italic_font Operator Mono Book Italic
# bold_italic_font Operator Mono Medium Italic
#
# You can get a list of full family names available on your computer by running
# kitty list-fonts
# The default values shown below rely on your OS to choose an appropriate monospace font family.
font_family      Hack Nerd Font Mono
# font_family      FuraCode Nerd Font
italic_font      auto
bold_font        Hack Nerd Font Mono Bold
bold_italic_font auto

# Font size (in pts)
font_size        18.0

# The amount the font size is changed by (in pts) when increasing/decreasing
# the font size in a running terminal.
font_size_delta 1


# Adjust the cell dimensions.
# You can use either numbers, which are interpreted as pixels or percentages
# (number followed by %), which are interpreted as percentages of the
# unmodified values. You can use negative pixels or percentages less than
# 100% to reduce sizes (but this might cause rendering artifacts).
adjust_line_height -1
adjust_column_width -1

# Symbol mapping (special font for specified unicode code points). Map the
# specified unicode codepoints to a particular font. Useful if you need special
# rendering for some symbols, such as for Powerline. Avoids the need for
# patched fonts. Each unicode code point is specified in the form U+<code point
# in hexadecimal>. You can specify multiple code points, separated by commas
# and ranges separated by hyphens. symbol_map itself can be specified multiple times.
# Syntax is:
#
# symbol_map codepoints Font Family Name
#
# For example:
#
# symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols

# Change the sizes of the lines used for the box drawing unicode characters
# These values are in pts. They will be scaled by the monitor DPI to arrive at
# a pixel value. There must be four values corresponding to thin, normal, thick,
# and very thick lines;
box_drawing_scale 0.001, 1, 1.5, 2
# }}}


# Cursor customization {{{
# The cursor color
cursor           #cccccc

# The cursor shape can be one of (block, beam, underline)
cursor_shape     block

# The interval (in seconds) at which to blink the cursor. Set to zero to
# disable blinking. Note that numbers smaller than repaint_delay will be
# limited to repaint_delay.
cursor_blink_interval     0.5

# Stop blinking cursor after the specified number of seconds of keyboard inactivity. Set to
# zero to never stop blinking.
cursor_stop_blinking_after 15.0
# }}}


# Scrollback {{{
# Number of lines of history to keep in memory for scrolling back
scrollback_lines 2000

#: Number of lines of history to keep in memory for scrolling back.
#: Memory is allocated on demand. Negative numbers are (effectively)
#: infinite scrollback. Note that using very large scrollback is not
#: recommended a it can slow down resizing of the terminal and also
#: use large amounts of RAM.

scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER

#: Program with which to view scrollback in a new window. The
#: scrollback buffer is passed as STDIN to this program. If you change
#: it, make sure the program you use can handle ANSI escape sequences
#: for colors and text formatting. INPUT_LINE_NUMBER in the command
#: line above will be replaced by an integer representing which line
#: should be at the top of the screen.

wheel_scroll_multiplier 5.0

#: Modify the amount scrolled by the mouse wheel. Note this is only
#: used for low precision scrolling devices, not for high precision
#: scrolling on platforms such as macOS and Wayland. Use negative
#: numbers to change scroll direction.

#: }}}


# Mouse {{{
# The color and style for highlighting URLs on mouse-over. url_style can be one of:
# none, single, double, curly
url_color #0087BD
url_style curly

# The modifier keys to press when clicking with the mouse on URLs to open the URL
open_url_modifiers kitty_mod

# The program with which to open URLs that are clicked on. The special value "default" means to
# use the operating system's default URL handler.
open_url_with default

# Copy to clipboard on select. With this enabled, simply selecting text with
# the mouse will cause the text to be copied to clipboard. Useful on platforms
# such as macOS/Wayland that do not have the concept of primary selections. Note
# that this is a security risk, as all programs, including websites open in your
# browser can read the contents of the clipboard.
copy_on_select no

# The modifiers to use rectangular selection (i.e. to select text in a
# rectangular block with the mouse)
rectangle_select_modifiers ctrl+alt

# Characters considered part of a word when double clicking. In addition to these characters
# any character that is marked as an alpha-numeric character in the unicode
# database will be matched.
select_by_word_characters :@-./_~?&=%+#

# The interval between successive clicks to detect double/triple clicks (in seconds)
click_interval 0.5

# Hide mouse cursor after the specified number of seconds of the mouse not being used. Set to
# zero to disable mouse cursor hiding.
mouse_hide_wait 3.0

# Set the active window to the window under the mouse when moving the mouse around
focus_follows_mouse yes
# }}}


# Performance tuning {{{
# Delay (in milliseconds) between screen updates. Decreasing it, increases
# frames-per-second (FPS) at the cost of more CPU usage. The default value
# yields ~100 FPS which is more than sufficient for most uses. Note that to
# actually achieve 100FPS you have to either set sync_to_monitor to no or use a
# monitor with a high refresh rate.
repaint_delay    10

# Delay (in milliseconds) before input from the program running in the terminal
# is processed. Note that decreasing it will increase responsiveness, but also
# increase CPU usage and might cause flicker in full screen programs that
# redraw the entire screen on each loop, because kitty is so fast that partial
# screen updates will be drawn.
input_delay 3

# Sync screen updates to the refresh rate of the monitor. This prevents
# tearing (https://en.wikipedia.org/wiki/Screen_tearing) when scrolling. However,
# it limits the rendering speed to the refresh rate of your monitor. With a
# very high speed mouse/high keyboard repeat rate, you may notice some slight input latency.
# If so, set this to no.
sync_to_monitor yes
# }}}


# Audio/visual bell {{{
# Visual bell duration. Flash the screen when a bell occurs for the specified number of
# seconds. Set to zero to disable.
visual_bell_duration 0.0

# Enable/disable the audio bell. Useful in environments that require silence.
enable_audio_bell yes

# Request window attention on bell.
# Makes the dock icon bounce on macOS or the taskbar flash on linux.
window_alert_on_bell yes

# Show a bell symbol on the tab if a bell occurs in one of the windows in the
# tab and the window is not the currently focused window
bell_on_tab yes
# }}}


# Window layout {{{
# If enabled, the window size will be remembered so that new instances of kitty will have the same
# size as the previous instance. If disabled, the window will initially have size configured
# by initial_window_width/height, in pixels.
remember_window_size   yes
initial_window_width   640
initial_window_height  400

# The enabled window layouts. A comma separated list of layout names. The special value * means
# all layouts. The first listed layout will be used as the startup layout.
# For a list of available layouts, see the README.
enabled_layouts *

# The step size (in units of cell width/cell height) to use when resizing
# windows. The cells value is used for horizontal resizing and the lines value
# for vertical resizing.
window_resize_step_cells 2
window_resize_step_lines 2

#: The step size (in units of cell width/cell height) to use when
#: resizing windows. The cells value is used for horizontal resizing
#: and the lines value for vertical resizing.

window_border_width 1.0

#: The width (in pts) of window borders. Will be rounded to the
#: nearest number of pixels based on screen resolution. Note that
#: borders are displayed only when more than one window is visible.
#: They are meant to separate multiple windows.

draw_minimal_borders yes

#: Draw only the minimum borders needed. This means that only the
#: minimum needed borders for inactive windows are drawn. That is only
#: the borders that separate the inactive window from a neighbor. Note
#: that setting a non-zero window margin overrides this and causes all
#: borders to be drawn.

window_margin_width 1.0

#: The window margin (in pts) (blank area outside the border)

single_window_margin_width -1000.0

#: The window margin (in pts) to use when only a single window is
#: visible. Negative values will cause the value of
#: window_margin_width to be used instead.


# The window margin (in pts) (blank area outside the border)
window_margin_width 3

# The window padding (in pts) (blank area between the text and the window border)
window_padding_width 3

# The color for the border of the active window
#active_border_color #258489
active_border_color #a763a7

# The color for the border of inactive windows
#inactive_border_color #2d3531
#inactive_border_color #cccccc
inactive_border_color #4c3f3d

# The color for the border of inactive windows in which a bell has occurred
bell_border_color #2d3531

# Fade the text in inactive windows by the specified amount (a number between
# zero and one, with 0 being fully faded).
inactive_text_alpha 0.7
# }}}


#: Tab bar {{{

tab_bar_edge bottom

#: Which edge to show the tab bar on, top or bottom

tab_bar_margin_width 0.0

#: The margin to the left and right of the tab bar (in pts)

tab_bar_style powerline

#: The tab bar style, can be one of: fade or separator. In the fade
#: style, each tab's edges fade into the background color, in the
#: separator style, tabs are separated by a configurable separator.

tab_fade 0.25 0.5 0.75 1

#: Control how each tab fades into the background when using fade for
#: the tab_bar_style. Each number is an alpha (between zero and one)
#: that controls how much the corresponding cell fades into the
#: background, with zero being no fade and one being full fade. You
#: can change the number of cells used by adding/removing entries to
#: this list.

tab_separator " ┇"

#: The separator between tabs in the tab bar when using separator as
#: the tab_bar_style.

active_tab_foreground   #000
active_tab_background   #eee
active_tab_font_style   bold-italic
inactive_tab_foreground #444
inactive_tab_background #999
inactive_tab_font_style normal
# }}}


# Color scheme {{{
# The foreground color
#foreground       #dddddd

# The background color
#background       #000000

# The opacity of the background. A number between 0 and 1, where 1 is opaque and 0 is fully transparent.
# This will only work if supported by the OS (for instance, when using a compositor under X11). Note
# that it only sets the default background color's opacity. This is so that
# things like the status bar in vim, powerline prompts, etc. still look good.
# But it means that if you use a color theme with a background color in your
# editor, it will not be rendered as transparent.  Instead you should change the
# default background color in your kitty config and not use a background color
# in the editor color scheme. Or use the escape codes to set the terminals
# default colors in a shell script to launch your editor.
# Be aware that using a value less than 1.0 is a (possibly significant) performance hit.
background_opacity 1.0

# How much to dim text that has the DIM/FAINT attribute set. 1.0 means no dimming and
# 0.0 means fully dimmed (i.e. invisible).
dim_opacity 0.3

# The foreground for selections
#selection_foreground #000000

# The background for selections
#selection_background #FFFACD

# The 16 terminal colors. There are 8 basic colors, each color has a dull and
# bright version. You can also set the remaining colors from the 256 color table
# as color16 to color256.

# solarized {{{
# Dark
    
# }}}

# Base16 OneDark - kitty color config {{{
# Lalit Magant (http://github.com/tilal6991)
# background #282c34
# foreground #abb2bf
# selection_background #abb2bf
# selection_foreground #282c34
# url_color #565c64
# cursor #abb2bf

# # normal
# color0 #282c34
# color1 #e06c75
# color2 #98c379
# color3 #e5c07b
# color4 #61afef
# color5 #c678dd
# color6 #56b6c2
# color7 #abb2bf

# # bright
# color8 #545862
# color9 #e06c75
# color10 #98c379
# color11 #e5c07b
# color12 #61afef
# color13 #c678dd
# color14 #56b6c2
# color15 #abb2bf
# }}}
#
# 
# Dogrun {{{ 
[colors]

# special
foreground       #9ea3c0
foreground_bold  #9ea3c0
cursor           #9ea3c0
background       #222433

# black
color0   #000000
color8   #5d6872

# red
color1   #ff6e67
color9   #d5635e

# green
color2   #7cbe8c
color10  #6ca97a

# yellow
color3   #f4f99d
color11  #b3c580

# blue
color4   #929be5
color12  #838cd6

# magenta
color5   #ff92d0
color13  #ff92d0

# cyan
color6   #2aacbd
color14  #2aacbd

# white
color7   #c7c7c7
color15  #ffffff

# }}}


# }}}


# Advanced {{{

# The shell program to execute. The default value of . means
# to use whatever shell is set as the default shell for the current user.
# Note that on macOS if you change this, you might need to add --login to
# ensure that the shell starts in interactive mode and reads its startup rc files.
shell .

# Close the window when the child process (shell) exits. If no (the default),
# the terminal will remain open when the child exits as long as there are still
# processes outputting to the terminal (for example disowned or backgrounded
# processes). If yes, the window will close as soon as the child process exits.
# Note that setting it to yes means that any background processes still using
# the terminal can fail silently because their stdout/stderr/stdin no longer
# work.
close_on_child_death yes

# Allow other programs to control kitty. If you turn this on other programs can
# control all aspects of kitty, including sending text to kitty windows,
# opening new windows, closing windows, reading the content of windows, etc.
# Note that this even works over ssh connections.
allow_remote_control yes

# Allow programs running in kitty to read and write from the clipboard. You can
# control exactly which actions are allowed. The set of possible actions is:
# write-clipboard read-clipboard write-primary read-primary
# The default is to allow writing to the clipboard and primary selection. Note
# that enabling the read functionality is a security risk as it means that any
# program, even one running on a remote server via SSH can read your clipboard.
clipboard_control write-clipboard write-primary

# The value of the TERM environment variable to set. Changing this can break
# many terminal programs, only change it if you know what you are doing, not
# because you read some advice on Stack Overflow to change it.
term xterm-kitty


# }}}


# Keyboard shortcuts {{{
# For a list of key names, see: http://www.glfw.org/docs/latest/group__keys.html
# For a list of modifier names, see: http://www.glfw.org/docs/latest/group__mods.html

# The value of kitty_mod is used as the modifier for all default shortcuts, you
# can change it in your kitty.conf to change the modifiers for all the default
# shortcuts.
kitty_mod cmd
#
# You can use the special action no_op to unmap a keyboard shortcut that is
# assigned in the default configuration.
#
# You can combine multiple actions to be triggered by a single shortcut, using the
# syntax below:
# map key combine <separator> action1 <separator> action2 <separator> action3 ...
# For example:
# map kitty_mod+e combine : new_window : next_layout
# this will create a new window and switch to the next available layout
#
# You can use multi-key shortcuts using the syntax shown below:
# map key1>key2>key3 action
# For example:
# map ctrl+f>2 set_font_size 20
# this will change the font size to 20 points when you press ctrl+f and then 2

# Clipboard {{{
map kitty_mod+v        paste_from_clipboard
map kitty_mod+s        paste_from_selection
map kitty_mod+c        copy_to_clipboard
map shift+insert       paste_from_selection
# You can also pass the contents of the current selection to any program using
# pass_selection_to_program. By default, the system's open program is used, but
# you can specify your own, for example:
# map kitty_mod+o      pass_selection_to_program firefox
map kitty_mod+o        pass_selection_to_program
# }}}

# Scrolling {{{
# map kitty_mod+up        scroll_line_up
# map kitty_mod+down      scroll_line_down
map kitty_mod+k         scroll_line_up
map kitty_mod+j         scroll_line_down
map kitty_mod+page_up   scroll_page_up
map kitty_mod+page_down scroll_page_down
map kitty_mod+home      scroll_home
map kitty_mod+end       scroll_end
map kitty_mod+h         show_scrollback
# }}}

# Window management {{{
map alt+enter    new_window
map kitty_mod+n        new_os_window
map kitty_mod+w        close_window
map alt+down        next_window
map alt+up        previous_window
map kitty_mod+f        move_window_forward
map kitty_mod+b        move_window_backward
map kitty_mod+`        move_window_to_top
map kitty_mod+r        start_resizing_window
# Switching to a particular window
map kitty_mod+1        first_window
map kitty_mod+2        second_window
map kitty_mod+3        third_window
map kitty_mod+4        fourth_window
map kitty_mod+5        fifth_window
map kitty_mod+6        sixth_window
map kitty_mod+7        seventh_window
map kitty_mod+8        eighth_window
map kitty_mod+9        ninth_window
map kitty_mod+0        tenth_window
# You can open a new window running an arbitrary program, for example:
# map kitty_mod+y      new_window mutt
#
# You can pass the current selection to the new program by using the @selection placeholder
# map kitty_mod+y      new_window less @selection
#
# You can even send the contents of the current screen + history buffer as stdin using
# the placeholders @text (which is the plain text) and @ansi (which includes text styling escape codes).
# For only the current screen, use @screen or @ansi_screen.
# For example, the following command opens the scrollback buffer in less in a new window.
# map kitty_mod+y      new_window @ansi less +G -R
#
# You can open a new window with the current working directory set to the
# working directory of the current window using
# map ctrl+alt+enter    new_window_with_cwd
# }}}

# Tab management {{{
map kitty_mod+right    next_tab
map kitty_mod+left     previous_tab
map kitty_mod+t        new_tab
map kitty_mod+q        close_tab
map ctrl+shift+l        next_layout
map kitty_mod+.        move_tab_forward
map kitty_mod+,        move_tab_backward
map kitty_mod+alt+t    set_tab_title
map alt+h         neighboring_window left
map alt+n         neighboring_window down
map alt+e         neighboring_window up
map alt+i         neighboring_window right
# You can also create shortcuts to go to specific tabs, with 1 being the first tab
# map ctrl+alt+1          goto_tab 1
# map ctrl+alt+2          goto_tab 2

# Just as with new_window above, you can also pass the name of arbitrary
# commands to run when using new_tab and use new_tab_with_cwd.
# }}}

# Layout management {{{
# You can create shortcuts to switch to specific layouts
# map ctrl+alt+1          goto_layout tall
map kitty_mod+shift+1          goto_layout stack
map kitty_mod+shift+2          goto_layout tall
map kitty_mod+shift+3          goto_layout fat
# }}}

# Font sizes {{{
map kitty_mod+equal    increase_font_size
map kitty_mod+minus    decrease_font_size
map kitty_mod+backspace restore_font_size
# To setup shortcuts for specific font sizes, follow the example below:
# map kitty_mod+f6     set_font_size 10.0
# map kitty_mod+f7     set_font_size 20.5
# }}}

# Select and act on visible text {{{
# Use the hints kitten to select text and either pass it to an external program or
# insert it into the terminal or copy it to the clipboard.
#
# Open a currently visible URL using the keyboard. The program used to open the
# URL is specified in open_url_with.
map kitty_mod+e         kitten hints

# Select a path/filename and insert it into the terminal. Useful, for instance to
# run git commands on a filename output from a previous git command.
map kitty_mod+p>f       kitten hints --type path --program -

# Select a path/filename and open it with the default open program.
map kitty_mod+p>shift+f kitten hints --type path

# Select a line of text and insert it into the terminal. Use for the
# output of things like: ls -1
map kitty_mod+p>l       kitten hints --type line --program -

# Select words and insert into terminal.
map kitty_mod+p>w       kitten hints --type word --program -

# The hints kitten has many more modes of operation that you can map to different
# shortcuts. For a full description run: kitty +kitten hints --help
# }}}

# Miscellaneous {{{
map kitty_mod+f11      toggle_fullscreen
map kitty_mod+u        input_unicode_character
map kitty_mod+f2       edit_config_file
# Open the kitty shell in a new window/tab/overlay/os_window to control kitty using commands.
map kitty_mod+escape   kitty_shell window

# Sending arbitrary text on shortcut key presses
# You can tell kitty to send arbitrary (UTF-8) encoded text to
# the client program when pressing specified shortcut keys. For example:
# map ctrl+alt+a send_text all Special text
# This will send "Special text" when you press the Ctrl+Alt+a key combination.
# The text to be sent is a python string literal so you can use escapes like
# \x1b to send control codes or \u21fb to send unicode characters (or you can
# just input the unicode characters directly as UTF-8 text). The first argument
# to send_text is the keyboard modes in which to activate the shortcut. The possible
# values are normal or application or kitty or a comma separated combination of them.
# The special keyword all means all modes. The modes normal and application refer to
# the DECCKM cursor key mode for terminals, and kitty refers to the special kitty
# extended keyboard protocol. Another example, that outputs a word and then moves the cursor
# to the start of the line (same as pressing the Home key):
# map ctrl+alt+a send_text normal Word\x1b[H
# map ctrl+alt+a send_text application Word\x1bOH
# }}}

# You can have kitty remove all shortcut definition seen up to this point. Useful, for
# instance, to remove the default shortcuts.
clear_all_shortcuts no
# }}}


# OS specific tweaks {{{

# Change the color of the kitty window's titlebar on macOS. A value of "system"
# means to use the default system color, a value of "background" means to use
# the background color of the currently active window and finally you can use
# an arbitrary color, such as #12af59 or "red". WARNING: This option works by
# using a hack, as there is no proper Cocoa API for it. It sets the background
# color of the entire window and makes the titlebar transparent. As such it is
# incompatible with background_opacity. If you want to use both, you are
# probably better off just hiding the titlebar with macos_hide_titlebar.
macos_titlebar_color background
#macos_titlebar_color system

# Hide the kitty window's title bar on macOS.
macos_hide_titlebar no

# Use the option key as an alt key. With this set to no, kitty will use
# the macOS native Option+Key = unicode character behavior. This will
# break any Alt+key keyboard shortcuts in your terminal programs, but you
# can use the macOS unicode input technique.
macos_option_as_alt yes

macos_window_resizable yes
# Hide the kitty window from running tasks (alt-tab) on macOS.
macos_hide_from_tasks no
macos_custom_beam_cursor no
macos_thicken_font 0
macos_traditional_fullscreen no
macos_quit_when_last_window_closed no
macos_show_window_title_in none

# }}}
#