Skip to content

Instantly share code, notes, and snippets.

@qichunren

qichunren/boot.txt

Last active February 22, 2024 16:49
Show Gist options
  • Save qichunren/6ace8bc6c55a4dc72ae2ab95c3043d91 to your computer and use it in GitHub Desktop.
Save qichunren/6ace8bc6c55a4dc72ae2ab95c3043d91 to your computer and use it in GitHub Desktop.
Download ZIP
T113_buildroot_tf_boot log
Raw
boot.txt
[88]HELLO! BOOT0 is starting!
[90]BOOT0 commit : 1417090655
[93]set pll start
[95]fix vccio detect value:0xc0
[102]periph0 has been enabled
[105]set pll end
[107][pmu]: bus read error
[109]board init ok
[111]enable_jtag
[113]ZQ value = 0x2f
[115]get_pmu_exist() = -1
[118]ddr_efuse_type: 0xa
[120]trefi:7.8ms
[122][AUTO DEBUG] single rank and full DQ!
[126]ddr_efuse_type: 0xa
[129]trefi:7.8ms
[131][AUTO DEBUG] rank 0 row = 13
[134][AUTO DEBUG] rank 0 bank = 8
[138][AUTO DEBUG] rank 0 page size = 2 KB
[142]DRAM BOOT DRIVE INFO: V0.33
[145]DRAM CLK = 792 MHz
[147]DRAM Type = 3 (2:DDR2,3:DDR3)
[150]DRAMC read ODT off.
[153]DRAM ODT value: 0x42.
[156]ddr_efuse_type: 0xa
[159]DRAM SIZE =128 M
[161]dram_tpr4:0x0
[163]PLL_DDR_CTRL_REG:0xf8004100
[166]DRAM_CLK_REG:0xc0000000
[168][TIMING DEBUG] MR2= 0x18
[176]DRAM simple test OK.
[179]rtc standby flag is 0x0, super standby flag is 0x0
[184]dram size =128
[187]card no is 0
[188]sdcard 0 line count 1
[191][mmc]: mmc driver ver 2021-05-21 14:47
[200][mmc]: Wrong media type 0x0
[203][mmc]: ***Try SD card 0***
[212][mmc]: HSSDR52/SDR25 1 bit
[215][mmc]: 50000000 Hz
[217][mmc]: 7386 MB
[219][mmc]: ***SD/MMC 0 init OK!!!***
[475]Loading boot-pkg Succeed(index=0).
[478]Entry_name = u-boot
[485]Entry_name = optee
[489]Entry_name = dtb
[492]mmc not para
[494]Jump to second Boot.
M/TC: OP-TEE version: 8b49ce62-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Fri Aug 12 08:24:15 UTC 2022 arm
U-Boot 2018.07-gd9e6718-dirty (Feb 22 2024 - 21:54:26 +0800) Allwinner Technology
[00.546]CPU: Allwinner Family
[00.549]Model: sun8iw20
[00.551]DRAM: 128 MiB
[00.555]Relocation Offset is: 04ec4000
[00.582]secure enable bit: 0
E/TC:0 fdt_getprop_u32:343 prop trace_level not found
[00.595]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz
[00.601]gic: sec monitor mode
sunxi flash map init
SPI ALL: ready
[00.608]flash init start
[00.610]workmode = 0,storage type = 1
get value error
[00.615][mmc]: mmc driver ver uboot2018:2022-12-07 18:56:00
[00.621][mmc]: get sdc_type fail and use default host:tm1.
[00.627][mmc]: can't find node "mmc0",will add new node
[00.632][mmc]: fdt err returned <no error>
[00.635][mmc]: Using default timing para
[00.639][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.657][mmc]: card_caps:0x3000000a
[00.660][mmc]: host_caps:0x3000003f
[00.664]sunxi flash init ok
[00.666]line:703 init_clocks
[00.669]drv_disp_init
[00.674]handle_num : 6
request pwm success, pwm7:pwm7:0x2000c00.
[00.684]drv_disp_init finish
[00.694]Loading Environment from SUNXI_FLASH... OK
[00.713]boot_gui_init:start
[00.716]set disp.dev2_output_type fail. using defval=0
[00.722]set disp.fb0_rot_used fail. using defval=0
[00.727]set disp.fb0_rot_degree fail. using defval=0
[00.732]boot_gui_init:finish
partno erro : can't find partition bootloader
[00.742]bmp_name=bootlogo.bmp size 4096054
[00.903]LCD open finish
no support big size bmp[800x1280] on fb[1024x600]
[00.927]show bmp on fb failed !-1
[00.932]Item0 (Map) magic is bad
[00.934]the secure storage item0 copy0 magic is bad
[00.940]Item0 (Map) magic is bad
[00.942]the secure storage item0 copy1 magic is bad
[00.947]Item0 (Map) magic is bad
secure storage read hdcpkey fail
[00.953]secure storage read hdcpkey fail with:-1
[00.957]usb burn from boot
delay time 0
weak:otg_phy_config
[00.968]usb prepare ok
[01.271]overtime
[01.274]do_burn_from_boot usb : no usb exist
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
[01.306]update part info
[01.309]update bootcmd
[01.316]change working_fdt 0x45e83e70 to 0x45e63e70
disable nand error: FDT_ERR_BADPATH
get value error
[01.326][mmc]: get sunxi-mmc0 string failed
[01.330]The storage not support sample function
[01.347]update dts
Hit any key to stop autoboot: 0
dsp0:dsp close in dts
boot addr 0x43000000 0x43472000 exceed dsp0 scope
dsp0 addr 0x43000000 0x430fc000
[03.609]no vendor_boot partition is found
Android's image name: sun8i_arm
ERROR: reserving fdt memory region failed (addr=41900000 size=200000)
ERROR: reserving fdt memory region failed (addr=41c00000 size=400000)
ERROR: reserving fdt memory region failed (addr=41b00000 size=100000)
ERROR: reserving fdt memory region failed (addr=45f0e000 size=258000)
[03.647]Starting kernel ...
[03.649][mmc]: MMC Device 2 not found
[03.653][mmc]: mmc 2 not find, so not exit
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.61 (qichunren@qichunren-VirtualBox) (arm-linux-gnueabi-gcc (Linaro GCC 5.3-2016.05) 5.3.1 20160412, GNU ld (Linaro_Binutils-2016.05) 2.25.0 Linaro 2016_02) #1 SMP PREEMPT Thu Feb 22 17:13:48 CST 2024
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: sun8iw20
[ 0.000000] printk: bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x47800000
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 15 pages/cpu s30784 r8192 d22464 u61440
[ 0.000000] pcpu-alloc: s30784 r8192 d22464 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p5 init=/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:dsp0@mmcblk0p6:UDISK@mmcblk0p7 cma=8M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.hardware=sun8iw20p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.07-gd9e6718-dirty(02/22/2024-21:54:26) mbr_offset=1032192 disp_reserve=2457600,0x45f0e000 androidboot.dramsize=128
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 98996K/131072K available (7168K kernel code, 305K rwdata, 2268K rodata, 1024K init, 1169K bss, 23884K reserved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x24c/0x3cc with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008009] Switching to timer-based delay loop, resolution 41ns
[ 0.014198] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.023974] Console: colour dummy device 80x30
[ 0.028464] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.038834] pid_max: default: 32768 minimum: 301
[ 0.043576] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.050913] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.059277] CPU: Testing write buffer coherency: ok
[ 0.064523] /cpus/cpu@0 missing clock-frequency property
[ 0.069870] /cpus/cpu@1 missing clock-frequency property
[ 0.075209] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.081456] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.088143] rcu: Hierarchical SRCU implementation.
[ 0.093399] smp: Bringing up secondary CPUs ...
[ 0.099194] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.099348] smp: Brought up 1 node, 2 CPUs
[ 0.109151] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.115331] CPU: All CPU(s) started in SVC mode.
[ 0.120473] devtmpfs: initialized
[ 0.136720] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.144927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.154791] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.162085] pinctrl core: initialized pinctrl subsystem
[ 0.168722] NET: Registered protocol family 16
[ 0.174805] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.212246] rtc_ccu: sunxi ccu init OK
[ 0.218358] ccu: sunxi ccu init OK
[ 0.222478] r_ccu: sunxi ccu init OK
[ 0.261192] sun6i-dma 3002000.dma-controller: sunxi dma probed
[ 0.271145] iommu: Default domain type: Translated
[ 0.276331] sunxi iommu: irq = 24
[ 0.281054] SCSI subsystem initialized
[ 0.285219] usbcore: registered new interface driver usbfs
[ 0.290858] usbcore: registered new interface driver hub
[ 0.296293] usbcore: registered new device driver usb
[ 0.301750] videodev: Linux video capture interface: v2.00
[ 0.308441] Advanced Linux Sound Architecture Driver Initialized.
[ 0.315278] Bluetooth: Core ver 2.22
[ 0.318959] NET: Registered protocol family 31
[ 0.323425] Bluetooth: HCI device and connection manager initialized
[ 0.329805] Bluetooth: HCI socket layer initialized
[ 0.334691] Bluetooth: L2CAP socket layer initialized
[ 0.339767] Bluetooth: SCO socket layer initialized
[ 0.344940] pwm module init!
[ 0.349267] g2d 5410000.g2d: Adding to iommu group 0
[ 0.354756] G2D: rcq version initialized.major:251
[ 0.360514] clocksource: Switched to clocksource arch_sys_counter
[ 0.376132] sun8iw20-pinctrl pio: initialized sunXi PIO driver
[ 0.396008] thermal_sys: Registered thermal governor 'step_wise'
[ 0.396014] thermal_sys: Registered thermal governor 'user_space'
[ 0.402083] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.408735] NET: Registered protocol family 2
[ 0.420247] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.428655] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.436331] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.443404] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.449846] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.456419] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.463620] NET: Registered protocol family 1
[ 0.469058] sun8iw20-pinctrl pio: pio supply vcc-pc not found, using dummy regulator
[ 0.477338] spi spi0: spi0 supply spi not found, using dummy regulator
[ 0.484186] sunxi_spi_resource_get()2259 - [spi0] SPI MASTER MODE
[ 0.490340] sunxi_spi_resource_get()2297 - Failed to get sample mode
[ 0.496733] sunxi_spi_resource_get()2302 - Failed to get sample delay
[ 0.503214] sunxi_spi_resource_get()2306 - sample_mode:-1431633921 sample_delay:-1431633921
[ 0.511607] sunxi_spi_request_dma()988 - [spi0] Request DMA channel dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
[ 0.522481] sunxi_spi_clk_init()2356 - [spi0] mclk 100000000
[ 0.528883] sunxi_spi_probe()2809 - [spi0]: driver probe succeed, base c881f000, irq 39
[ 0.538804] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.554224] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.560306] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.564997] fuse: init (API version 7.31)
[ 0.599040] io scheduler mq-deadline registered
[ 0.603708] io scheduler kyber registered
[ 0.609128] [DISP]disp_module_init
[ 0.613287] disp 5000000.disp: Adding to iommu group 0
[ 0.619046] [DISP] parser_disp_init_para,line:1407:
[ 0.619050] of_property_read fb0_width fail
[ 0.628194] [DISP] disp_init,line:2331:
[ 0.628199] smooth display screen:0 type:1 mode:4
[ 0.652827] [pq_init]+++
[ 0.655645] display_fb_request,fb_id:0
[ 0.665555] disp_al_manager_apply ouput_type:1
[ 0.670470] sun8iw20-pinctrl pio: pio supply vcc-pd not found, using dummy regulator
[ 0.678778] [DISP]disp_module_init finish
[ 0.681454] Freeing logo buffer memory: 2400K
[ 0.684556] sunxi_sid_init()783 - insmod ok
[ 0.692789] sun8iw20-pinctrl pio: pio supply vcc-pe not found, using dummy regulator
[ 0.700953] uart uart0: uart0 supply uart not found, using dummy regulator
[ 0.708168] uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
[ 0.716078] sw_console_setup()1831 - console setup baud 115200 parity n bits 8, flow n
[ 0.724047] printk: console [ttyS0] enabled
[ 0.724047] printk: console [ttyS0] enabled
[ 0.732916] printk: bootconsole [earlycon0] disabled
[ 0.732916] printk: bootconsole [earlycon0] disabled
[ 0.744274] uart uart4: uart4 supply uart not found, using dummy regulator
[ 0.752318] uart4: ttyS4 at MMIO 0x2501000 (irq = 35, base_baud = 1500000) is a SUNXI
[ 0.762021] misc dump reg init
[ 0.766966] sunxi-spinand: AW SPINand MTD Layer Version: 2.3 20211223
[ 0.774196] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.11 20231016
[ 0.787814] random: fast init done
[ 1.202958] random: crng init done
[ 1.780549] sunxi-spinand-phy: read id failed : -110
[ 1.786098] spi-nand: probe of spi0.0 failed with error -110
[ 1.792964] libphy: Fixed MDIO Bus: probed
[ 1.797620] usbcore: registered new interface driver asix
[ 1.803757] usbcore: registered new interface driver ax88179_178a
[ 1.810633] usbcore: registered new interface driver cdc_ether
[ 1.817188] usbcore: registered new interface driver net1080
[ 1.823578] usbcore: registered new interface driver cdc_subset
[ 1.830239] usbcore: registered new interface driver zaurus
[ 1.836556] usbcore: registered new interface driver cdc_ncm
[ 1.842886] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.850156] sunxi-ehci: EHCI SUNXI driver
[ 1.854979] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.861921] sunxi-ohci: OHCI SUNXI driver
[ 1.867659] sunxi-rtc 7090000.rtc: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1
[ 1.878929] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[ 1.889609] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[ 1.900862] sunxi-rtc 7090000.rtc: registered as rtc0
[ 1.906524] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[ 1.917120] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T00:00:05 UTC (5)
[ 1.925988] sunxi-rtc 7090000.rtc: sunxi rtc probed
[ 1.931811] i2c /dev entries driver
[ 1.937644] usbcore: registered new interface driver uvcvideo
[ 1.944081] USB Video Class driver (1.1.1)
[ 1.948647] sunxi cedar version 1.1
[ 1.952758] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[ 1.959065] VE: sunxi_cedar_probe power-domain init!!!
[ 1.964816] VE: install start!!!
[ 1.964816]
[ 1.970354] VE: cedar-ve the get irq is 40
[ 1.970354]
[ 1.976837] VE: ve_debug_proc_info:4d868802, data:f0e47afb, lock:334683f0
[ 1.976837]
[ 1.986067] VE: install end!!!
[ 1.986067]
[ 1.991125] VE: sunxi_cedar_probe
[ 1.996046] sunxi-wdt 20500a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 2.005121] Bluetooth: HCI UART driver ver 2.3
[ 2.010078] Bluetooth: HCI UART protocol H4 registered
[ 2.016115] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10
[ 2.025793] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.25 2022-6-21 13:40)
[ 2.035718] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[ 2.041940] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[ 2.048245] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[ 2.054664] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[ 2.061089] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[ 2.067588] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[ 2.074105] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[ 2.080625] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[ 2.087620] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[ 2.093119] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail
[ 2.099740] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.110867] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[ 2.130581] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.154967] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[ 2.160669] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.173220] usbcore: registered new interface driver usbhid
[ 2.175248] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.179424] usbhid: USB HID core driver
[ 2.193331] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.195249] exFAT: Version 1.3.0
[ 2.209792] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.213149] [AUDIOCODEC][sunxi_codec_parse_params][2437]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1
[ 2.213149]
[ 2.238971] [AUDIOCODEC][sunxi_codec_parse_params][2473]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[ 2.245150] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.250318] [AUDIOCODEC][sunxi_internal_codec_probe][2634]:codec probe finished
[ 2.260695] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 2.267965] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[ 2.278811] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 2.288168] [SNDCODEC][sunxi_card_init][583]:card init finished
[ 2.299836] mmc0: new high speed SDHC card at address 1234
[ 2.306831] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[ 2.313913] mmcblk0: mmc0:1234 SA08G 7.21 GiB
[ 2.323681] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input0
[ 2.332752] mmcblk0: p1 p2 p3 p4 p5 p6 p7
[ 2.339839] NET: Registered protocol family 17
[ 2.348499] Bluetooth: RFCOMM TTY layer initialized
[ 2.354016] Bluetooth: RFCOMM socket layer initialized
[ 2.359782] Bluetooth: RFCOMM ver 1.11
[ 2.364627] Registering SWP/SWPB emulation handler
[ 2.372520] tv_probe()1540 - of_property_read_string tv_power failed!
[ 2.380227] get_key_map_info()210 - Failed to find "tvout" in dts.
[ 2.387459] tv probe finished!
[ 2.408862] sunxi-i2c 2502400.twi: 2502400.twi supply twi not found, using dummy regulator
[ 2.419238] sunxi-i2c 2502400.twi: probe success
[ 2.425478] sunxi-thermal 2009400.ths: sun8iw20 cp version:17
[ 2.432588] sun8iw20-pinctrl pio: pio supply vcc-pg not found, using dummy regulator
[ 2.471475] get drvvbus-en is fail, 22
[ 2.475684] get ehci0-controller wakeup-source is fail.
[ 2.481760] sunxi ehci0-controller don't init wakeup source
[ 2.488014] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0d69a28, 0x:c88ae000, irq_no:33
[ 2.500061] [sunxi-ehci0]: Not init ehci0
[ 2.504971] get drvvbus-en is fail, 22
[ 2.509177] get ohci0-controller wakeup-source is fail.
[ 2.515196] sunxi ohci0-controller don't init wakeup source
[ 2.521469] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xc0d69cd8
[ 2.531148] [sunxi-ohci0]: Not init ohci0
[ 2.536690] otg manager soc@3000000:usbc0@0: soc@3000000:usbc0@0 supply usbc not found, using dummy regulator
[ 2.550324] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.560035] clk: Not disabling unused clocks
[ 2.564860] ALSA device list:
[ 2.568186] #0: audiocodec
[ 2.571432] cfg80211: failed to load regulatory.db
[ 2.576892] alloc_fd: slot 0 not NULL!
[ 2.586463] [EXFAT] trying to mount...
[ 2.591403] VFS: Cannot open root device "mmcblk0p5" or unknown-block(179,5): error -5
[ 2.600283] Please append a correct "root=" boot option; here are the available partitions:
[ 2.609683] b300 7563264 mmcblk0
[ 2.609686] driver: mmcblk
[ 2.617340] b301 17136 mmcblk0p1 a0085546-4166-744a-a353-fca9272b8e45
[ 2.617342]
[ 2.627404] b302 1008 mmcblk0p2 a0085546-4166-744a-a353-fca9272b8e46
[ 2.627406]
[ 2.637466] b303 1008 mmcblk0p3 a0085546-4166-744a-a353-fca9272b8e47
[ 2.637468]
[ 2.647529] b304 12600 mmcblk0p4 a0085546-4166-744a-a353-fca9272b8e48
[ 2.647531]
[ 2.657590] b305 53676 mmcblk0p5 a0085546-4166-744a-a353-fca9272b8e49
[ 2.657592]
[ 2.667652] b306 1008 mmcblk0p6 a0085546-4166-744a-a353-fca9272b8e4a
[ 2.667654]
[ 2.677713] b307 7455072 mmcblk0p7 a0085546-4166-744a-a353-fca9272b8e4b
[ 2.677715]
[ 2.687779] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,5)
[ 2.697241] CPU0: stopping
[ 2.700278] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.61 #1
[ 2.706908] Hardware name: Generic DT based system
[ 2.712300] [<c010e3b8>] (unwind_backtrace) from [<c010a97c>] (show_stack+0x10/0x14)
[ 2.720985] [<c010a97c>] (show_stack) from [<c06e7f64>] (dump_stack+0x7c/0x98)
[ 2.729085] [<c06e7f64>] (dump_stack) from [<c010c770>] (handle_IPI+0xc0/0x168)
[ 2.737282] [<c010c770>] (handle_IPI) from [<c0391430>] (gic_handle_irq+0x70/0x78)
[ 2.745773] [<c0391430>] (gic_handle_irq) from [<c01021cc>] (__irq_svc+0x6c/0xa8)
[ 2.754158] Exception stack(0xc0c01f40 to 0xc0c01f88)
[ 2.759821] 1f40: 0002081c c76b84f4 00000000 c0114da0 00000001 c0c00000 c0c03de8 c0c03e24
[ 2.768989] 1f60: 00000000 c77ff600 c0b280c0 00000000 c0d53830 c0c01f90 c0108078 c010807c
[ 2.778152] 1f80: 60000113 ffffffff
[ 2.782066] [<c01021cc>] (__irq_svc) from [<c010807c>] (arch_cpu_idle+0x2c/0x38)
[ 2.790360] [<c010807c>] (arch_cpu_idle) from [<c013e388>] (do_idle+0xb8/0x120)
[ 2.798556] [<c013e388>] (do_idle) from [<c013e68c>] (cpu_startup_entry+0x18/0x1c)
[ 2.807045] [<c013e68c>] (cpu_startup_entry) from [<c0b00c64>] (start_kernel+0x33c/0x3cc)
[ 2.816214] [<c0b00c64>] (start_kernel) from [<00000000>] (0x0)
[ 2.822861] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,5) ]---
Raw
对一个正常openwrt启动.txt
[100]HELLO! BOOT0 is starting!
[103]BOOT0 commit : 1417090655
[106]set pll start
[108]fix vccio detect value:0xc0
[115]periph0 has been enabled
[118]set pll end
[120][pmu]: bus read error
[122]board init ok
[124]enable_jtag
[126]ZQ value = 0x2f
[128]get_pmu_exist() = -1
[130]ddr_efuse_type: 0xa
[133]trefi:7.8ms
[135][AUTO DEBUG] single rank and full DQ!
[139]ddr_efuse_type: 0xa
[142]trefi:7.8ms
[144][AUTO DEBUG] rank 0 row = 13
[147][AUTO DEBUG] rank 0 bank = 8
[151][AUTO DEBUG] rank 0 page size = 2 KB
[155]DRAM BOOT DRIVE INFO: V0.33
[158]DRAM CLK = 792 MHz
[160]DRAM Type = 3 (2:DDR2,3:DDR3)
[163]DRAMC read ODT off.
[166]DRAM ODT value: 0x42.
[168]ddr_efuse_type: 0xa
[172]DRAM SIZE =128 M
[174]dram_tpr4:0x0
[175]PLL_DDR_CTRL_REG:0xf8004100
[178]DRAM_CLK_REG:0xc0000000
[181][TIMING DEBUG] MR2= 0x18
[189]DRAM simple test OK.
[192]rtc standby flag is 0x0, super standby flag is 0x0
[197]dram size =128
[199]card no is 0
[201]sdcard 0 line count 1
[204][mmc]: mmc driver ver 2021-05-21 14:47
[213][mmc]: Wrong media type 0x0
[216][mmc]: ***Try SD card 0***
[225][mmc]: HSSDR52/SDR25 1 bit
[228][mmc]: 50000000 Hz
[230][mmc]: 7386 MB
[232][mmc]: ***SD/MMC 0 init OK!!!***
[487]Loading boot-pkg Succeed(index=0).
[491]Entry_name = u-boot
[498]Entry_name = optee
[502]Entry_name = dtb
[505]mmc not para
[507]Jump to second Boot.
M/TC: OP-TEE version: 8b49ce62-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Fri Aug 12 08:24:15 UTC 2022 arm
U-Boot 2018.07-gd9e6718-dirty (Feb 23 2024 - 00:39:34 +0800) Allwinner Technology
[00.559]CPU: Allwinner Family
[00.561]Model: sun8iw20
[00.564]DRAM: 128 MiB
[00.567]Relocation Offset is: 04ec4000
[00.594]secure enable bit: 0
E/TC:0 fdt_getprop_u32:343 prop trace_level not found
[00.608]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz
[00.614]gic: sec monitor mode
sunxi flash map init
SPI ALL: ready
[00.621]flash init start
[00.623]workmode = 0,storage type = 1
get value error
[00.628][mmc]: mmc driver ver uboot2018:2022-12-07 18:56:00
[00.633][mmc]: get sdc_type fail and use default host:tm1.
[00.639][mmc]: can't find node "mmc0",will add new node
[00.644][mmc]: fdt err returned <no error>
[00.648][mmc]: Using default timing para
[00.652][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.669][mmc]: card_caps:0x3000000a
[00.672][mmc]: host_caps:0x3000003f
[00.676]sunxi flash init ok
[00.678]line:703 init_clocks
[00.681]drv_disp_init
[00.686]handle_num : 6
request pwm success, pwm7:pwm7:0x2000c00.
[00.697]drv_disp_init finish
[00.707]Loading Environment from SUNXI_FLASH... OK
[00.725]boot_gui_init:start
[00.728]set disp.dev2_output_type fail. using defval=0
[00.734]set disp.fb0_rot_used fail. using defval=0
[00.739]set disp.fb0_rot_degree fail. using defval=0
[00.744]boot_gui_init:finish
partno erro : can't find partition bootloader
[00.754]bmp_name=bootlogo.bmp size 4096054
[00.915]LCD open finish
no support big size bmp[800x1280] on fb[1024x600]
[00.939]show bmp on fb failed !-1
[00.944]Item0 (Map) magic is bad
[00.947]the secure storage item0 copy0 magic is bad
[00.952]Item0 (Map) magic is bad
[00.955]the secure storage item0 copy1 magic is bad
[00.959]Item0 (Map) magic is bad
secure storage read hdcpkey fail
[00.965]secure storage read hdcpkey fail with:-1
[00.970]usb burn from boot
delay time 0
weak:otg_phy_config
[00.981]usb prepare ok
[01.284]overtime
[01.287]do_burn_from_boot usb : no usb exist
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
root_partition is rootfs
set root to /dev/mmcblk0p5
[01.324]update part info
[01.327]update bootcmd
[01.335]change working_fdt 0x45e83e70 to 0x45e63e70
disable nand error: FDT_ERR_BADPATH
get value error
[01.345][mmc]: get sunxi-mmc0 string failed
[01.349]The storage not support sample function
[01.366]update dts
Hit any key to stop autoboot: 0
[07.575]no vendor_boot partition is found
Android's image name: sun8i_arm
ERROR: reserving fdt memory region failed (addr=41900000 size=200000)
ERROR: reserving fdt memory region failed (addr=41c00000 size=400000)
ERROR: reserving fdt memory region failed (addr=41b00000 size=100000)
ERROR: reserving fdt memory region failed (addr=45f0e000 size=258000)
[07.613]Starting kernel ...
[07.616][mmc]: MMC Device 2 not found
[07.619][mmc]: mmc 2 not find, so not exit
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.61 (qichunren@qichunren-VirtualBox) (arm-linux-gnueabi-gcc (Linaro GCC 5.3-2016.05) 5.3.1 20160412, GNU ld (Linaro_Binutils-2016.05) 2.25.0 Linaro 2016_02) #1 SMP PREEMPT Thu Feb 22 17:13:48 CST 2024
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: sun8iw20
[ 0.000000] printk: bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x47800000
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 15 pages/cpu s30784 r8192 d22464 u61440
[ 0.000000] pcpu-alloc: s30784 r8192 d22464 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 ro ot=/dev/mmcblk0p5 init=/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:dsp0@mmc blk0p6:UDISK@mmcblk0p7 cma=8M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun8iw20p1 b oot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.07-gd9e6718-dirty(02/23/2024-00:39:34) mbr_offset=1032192 disp_reserve=2457600, 0x45f0e000 androidboot.dramsize=128
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 98996K/131072K available (7168K kernel code, 305K rwdata, 2268K rodata, 1024K init, 1169K bss, 23884K reserved, 8192 K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x24c/0x3cc with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008025] Switching to timer-based delay loop, resolution 41ns
[ 0.014205] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.023976] Console: colour dummy device 80x30
[ 0.028458] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.038810] pid_max: default: 32768 minimum: 301
[ 0.043563] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.050909] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.059259] CPU: Testing write buffer coherency: ok
[ 0.064510] /cpus/cpu@0 missing clock-frequency property
[ 0.069848] /cpus/cpu@1 missing clock-frequency property
[ 0.075214] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.081458] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.088149] rcu: Hierarchical SRCU implementation.
[ 0.093419] smp: Bringing up secondary CPUs ...
[ 0.099209] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.099365] smp: Brought up 1 node, 2 CPUs
[ 0.109202] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.115399] CPU: All CPU(s) started in SVC mode.
[ 0.120537] devtmpfs: initialized
[ 0.136819] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.144999] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.154892] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.162197] pinctrl core: initialized pinctrl subsystem
[ 0.168840] NET: Registered protocol family 16
[ 0.174944] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.212452] rtc_ccu: sunxi ccu init OK
[ 0.218562] ccu: sunxi ccu init OK
[ 0.222666] r_ccu: sunxi ccu init OK
[ 0.260982] sun6i-dma 3002000.dma-controller: sunxi dma probed
[ 0.270896] iommu: Default domain type: Translated
[ 0.276106] sunxi iommu: irq = 24
[ 0.280694] SCSI subsystem initialized
[ 0.284840] usbcore: registered new interface driver usbfs
[ 0.290485] usbcore: registered new interface driver hub
[ 0.295936] usbcore: registered new device driver usb
[ 0.301194] videodev: Linux video capture interface: v2.00
[ 0.307874] Advanced Linux Sound Architecture Driver Initialized.
[ 0.314710] Bluetooth: Core ver 2.22
[ 0.318383] NET: Registered protocol family 31
[ 0.322850] Bluetooth: HCI device and connection manager initialized
[ 0.329559] Bluetooth: HCI socket layer initialized
[ 0.334468] Bluetooth: L2CAP socket layer initialized
[ 0.339594] Bluetooth: SCO socket layer initialized
[ 0.344781] pwm module init!
[ 0.349121] g2d 5410000.g2d: Adding to iommu group 0
[ 0.354546] G2D: rcq version initialized.major:251
[ 0.360335] clocksource: Switched to clocksource arch_sys_counter
[ 0.375934] sun8iw20-pinctrl pio: initialized sunXi PIO driver
[ 0.395796] thermal_sys: Registered thermal governor 'step_wise'
[ 0.395803] thermal_sys: Registered thermal governor 'user_space'
[ 0.401879] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.408534] NET: Registered protocol family 2
[ 0.420026] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.428426] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.436119] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.443210] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.449671] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.456252] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.463468] NET: Registered protocol family 1
[ 0.468923] sun8iw20-pinctrl pio: pio supply vcc-pc not found, using dummy regulator
[ 0.477220] spi spi0: spi0 supply spi not found, using dummy regulator
[ 0.484059] sunxi_spi_resource_get()2259 - [spi0] SPI MASTER MODE
[ 0.490204] sunxi_spi_resource_get()2297 - Failed to get sample mode
[ 0.496598] sunxi_spi_resource_get()2302 - Failed to get sample delay
[ 0.503072] sunxi_spi_resource_get()2306 - sample_mode:-1431633921 sample_delay:-1431633921
[ 0.511464] sunxi_spi_request_dma()988 - [spi0] Request DMA channel dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
[ 0.522321] sunxi_spi_clk_init()2356 - [spi0] mclk 100000000
[ 0.528730] sunxi_spi_probe()2809 - [spi0]: driver probe succeed, base c881f000, irq 39
[ 0.538671] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.554055] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.560131] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.564820] fuse: init (API version 7.31)
[ 0.599425] io scheduler mq-deadline registered
[ 0.604100] io scheduler kyber registered
[ 0.609680] [DISP]disp_module_init
[ 0.613703] disp 5000000.disp: Adding to iommu group 0
[ 0.619438] [DISP] parser_disp_init_para,line:1407:
[ 0.619441] of_property_read fb0_width fail
[ 0.628598] [DISP] disp_init,line:2331:
[ 0.628603] smooth display screen:0 type:1 mode:4
[ 0.653202] [pq_init]+++
[ 0.656016] display_fb_request,fb_id:0
[ 0.665939] disp_al_manager_apply ouput_type:1
[ 0.670995] [DISP]disp_module_init finish
[ 0.671058] sun8iw20-pinctrl pio: pio supply vcc-pd not found, using dummy regulator
[ 0.676702] sunxi_sid_init()783 - insmod ok
[ 0.687745] Freeing logo buffer memory: 2400K
[ 0.689060] sun8iw20-pinctrl pio: pio supply vcc-pe not found, using dummy regulator
[ 0.700287] uart uart0: uart0 supply uart not found, using dummy regulator
[ 0.707552] uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
[ 0.715470] sw_console_setup()1831 - console setup baud 115200 parity n bits 8, flow n
[ 0.723490] printk: console [ttyS0] enabled
[ 0.723490] printk: console [ttyS0] enabled
[ 0.732341] printk: bootconsole [earlycon0] disabled
[ 0.732341] printk: bootconsole [earlycon0] disabled
[ 0.743782] uart uart4: uart4 supply uart not found, using dummy regulator
[ 0.751819] uart4: ttyS4 at MMIO 0x2501000 (irq = 35, base_baud = 1500000) is a SUNXI
[ 0.761696] misc dump reg init
[ 0.766644] sunxi-spinand: AW SPINand MTD Layer Version: 2.3 20211223
[ 0.773866] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.11 20231016
[ 0.787489] random: fast init done
[ 1.207644] random: crng init done
[ 1.780364] sunxi-spinand-phy: read id failed : -110
[ 1.785916] spi-nand: probe of spi0.0 failed with error -110
[ 1.792770] libphy: Fixed MDIO Bus: probed
[ 1.797424] usbcore: registered new interface driver asix
[ 1.803552] usbcore: registered new interface driver ax88179_178a
[ 1.810422] usbcore: registered new interface driver cdc_ether
[ 1.816964] usbcore: registered new interface driver net1080
[ 1.823352] usbcore: registered new interface driver cdc_subset
[ 1.830007] usbcore: registered new interface driver zaurus
[ 1.836322] usbcore: registered new interface driver cdc_ncm
[ 1.842647] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.849912] sunxi-ehci: EHCI SUNXI driver
[ 1.854730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.861669] sunxi-ohci: OHCI SUNXI driver
[ 1.867407] sunxi-rtc 7090000.rtc: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1
[ 1.878659] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[ 1.889329] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[ 1.900734] sunxi-rtc 7090000.rtc: registered as rtc0
[ 1.906389] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[ 1.916986] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T00:00:09 UTC (9)
[ 1.925842] sunxi-rtc 7090000.rtc: sunxi rtc probed
[ 1.931667] i2c /dev entries driver
[ 1.937486] usbcore: registered new interface driver uvcvideo
[ 1.943916] USB Video Class driver (1.1.1)
[ 1.948473] sunxi cedar version 1.1
[ 1.952575] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[ 1.958874] VE: sunxi_cedar_probe power-domain init!!!
[ 1.964621] VE: install start!!!
[ 1.964621]
[ 1.970167] VE: cedar-ve the get irq is 40
[ 1.970167]
[ 1.976638] VE: ve_debug_proc_info:f643d6a4, data:4b586025, lock:7412b270
[ 1.976638]
[ 1.985863] VE: install end!!!
[ 1.985863]
[ 1.990919] VE: sunxi_cedar_probe
[ 1.995846] sunxi-wdt 20500a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 2.004916] Bluetooth: HCI UART driver ver 2.3
[ 2.009866] Bluetooth: HCI UART protocol H4 registered
[ 2.015895] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10
[ 2.025799] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.25 2022-6-21 13:40)
[ 2.035748] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[ 2.041939] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[ 2.048257] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[ 2.054675] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[ 2.061082] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[ 2.067585] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[ 2.074094] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[ 2.080611] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[ 2.087590] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[ 2.093064] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail
[ 2.099699] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.110809] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[ 2.130369] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.154741] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[ 2.160432] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.172967] usbcore: registered new interface driver usbhid
[ 2.175022] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.179174] usbhid: USB HID core driver
[ 2.193081] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.194996] exFAT: Version 1.3.0
[ 2.209523] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.212911] [AUDIOCODEC][sunxi_codec_parse_params][2437]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level :1, pa_pwr_level:1
[ 2.212911]
[ 2.238754] [AUDIOCODEC][sunxi_codec_parse_params][2473]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[ 2.244967] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.250111] [AUDIOCODEC][sunxi_internal_codec_probe][2634]:codec probe finished
[ 2.260547] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 2.267745] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[ 2.278576] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 2.287979] [SNDCODEC][sunxi_card_init][583]:card init finished
[ 2.299685] mmc0: new high speed SDHC card at address 1234
[ 2.306669] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[ 2.313605] mmcblk0: mmc0:1234 SA08G 7.21 GiB
[ 2.323415] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input0
[ 2.332503] mmcblk0: p1 p2 p3 p4 p5 p6 p7
[ 2.339602] NET: Registered protocol family 17
[ 2.348228] Bluetooth: RFCOMM TTY layer initialized
[ 2.353766] Bluetooth: RFCOMM socket layer initialized
[ 2.359508] Bluetooth: RFCOMM ver 1.11
[ 2.364372] Registering SWP/SWPB emulation handler
[ 2.372327] tv_probe()1540 - of_property_read_string tv_power failed!
[ 2.380000] get_key_map_info()210 - Failed to find "tvout" in dts.
[ 2.387262] tv probe finished!
[ 2.408678] sunxi-i2c 2502400.twi: 2502400.twi supply twi not found, using dummy regulator
[ 2.419078] sunxi-i2c 2502400.twi: probe success
[ 2.425319] sunxi-thermal 2009400.ths: sun8iw20 cp version:17
[ 2.432388] sun8iw20-pinctrl pio: pio supply vcc-pg not found, using dummy regulator
[ 2.471305] get drvvbus-en is fail, 22
[ 2.475515] get ehci0-controller wakeup-source is fail.
[ 2.481566] sunxi ehci0-controller don't init wakeup source
[ 2.487847] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0d69a28, 0x:c88ae000, irq_no:33
[ 2.499911] [sunxi-ehci0]: Not init ehci0
[ 2.504820] get drvvbus-en is fail, 22
[ 2.509028] get ohci0-controller wakeup-source is fail.
[ 2.515031] sunxi ohci0-controller don't init wakeup source
[ 2.521324] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xc0d69cd8
[ 2.530992] [sunxi-ohci0]: Not init ohci0
[ 2.536547] otg manager soc@3000000:usbc0@0: soc@3000000:usbc0@0 supply usbc not found, using dummy regulator
[ 2.550179] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.559892] clk: Not disabling unused clocks
[ 2.564713] ALSA device list:
[ 2.568040] #0: audiocodec
[ 2.571288] cfg80211: failed to load regulatory.db
[ 2.576743] alloc_fd: slot 0 not NULL!
[ 2.586347] [EXFAT] trying to mount...
[ 2.591291] VFS: Cannot open root device "mmcblk0p5" or unknown-block(179,5): error -5
[ 2.600171] Please append a correct "root=" boot option; here are the available partitions:
[ 2.609573] b300 7563264 mmcblk0
[ 2.609576] driver: mmcblk
[ 2.617228] b301 17219 mmcblk0p1 a0085546-4166-744a-a353-fca9272b8e45
[ 2.617231]
[ 2.627293] b302 1024 mmcblk0p2 a0085546-4166-744a-a353-fca9272b8e46
[ 2.627295]
[ 2.637356] b303 1024 mmcblk0p3 a0085546-4166-744a-a353-fca9272b8e47
[ 2.637357]
[ 2.647418] b304 16384 mmcblk0p4 a0085546-4166-744a-a353-fca9272b8e48
[ 2.647420]
[ 2.657480] b305 16384 mmcblk0p5 a0085546-4166-744a-a353-fca9272b8e49
[ 2.657481]
[ 2.667542] b306 1024 mmcblk0p6 a0085546-4166-744a-a353-fca9272b8e4a
[ 2.667543]
[ 2.677603] b307 7472317 mmcblk0p7 a0085546-4166-744a-a353-fca9272b8e4b
[ 2.677605]
[ 2.687669] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,5)
[ 2.697131] CPU0: stopping
[ 2.700166] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.61 #1
[ 2.706796] Hardware name: Generic DT based system
[ 2.712187] [<c010e3b8>] (unwind_backtrace) from [<c010a97c>] (show_stack+0x10/0x14)
[ 2.720871] [<c010a97c>] (show_stack) from [<c06e7f64>] (dump_stack+0x7c/0x98)
[ 2.728972] [<c06e7f64>] (dump_stack) from [<c010c770>] (handle_IPI+0xc0/0x168)
[ 2.737170] [<c010c770>] (handle_IPI) from [<c0391430>] (gic_handle_irq+0x70/0x78)
[ 2.745661] [<c0391430>] (gic_handle_irq) from [<c01021cc>] (__irq_svc+0x6c/0xa8)
[ 2.754046] Exception stack(0xc0c01f40 to 0xc0c01f88)
[ 2.759709] 1f40: 000206ac c76b84f4 00000000 c0114da0 00000001 c0c00000 c0c03de8 c0c03e24
[ 2.768877] 1f60: 00000000 c77ff600 c0b280c0 00000000 c0d53830 c0c01f90 c0108078 c010807c
[ 2.778041] 1f80: 60000113 ffffffff
[ 2.781954] [<c01021cc>] (__irq_svc) from [<c010807c>] (arch_cpu_idle+0x2c/0x38)
[ 2.790249] [<c010807c>] (arch_cpu_idle) from [<c013e388>] (do_idle+0xb8/0x120)
[ 2.798445] [<c013e388>] (do_idle) from [<c013e68c>] (cpu_startup_entry+0x18/0x1c)
[ 2.806934] [<c013e68c>] (cpu_startup_entry) from [<c0b00c64>] (start_kernel+0x33c/0x3cc)
[ 2.816102] [<c0b00c64>] (start_kernel) from [<00000000>] (0x0)
[ 2.822749] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,5) ]---
[100]HELLO! BOOT0 is starting!
[103]BOOT0 commit : adaf1174cc
[106]set pll start
[108]fix vccio detect value:0xc0
[116]periph0 has been enabled
[119]set pll end
[120][pmu]: bus read error
[123]board init ok
[125]ZQ value = 0x2f
[127]get_pmu_exist() = -1
[130]ddr_efuse_type: 0xa
[132]trefi:7.8ms
[135][AUTO DEBUG] single rank and full DQ!
[139]ddr_efuse_type: 0xa
[141]trefi:7.8ms
[144][AUTO DEBUG] rank 0 row = 13
[147][AUTO DEBUG] rank 0 bank = 8
[150][AUTO DEBUG] rank 0 page size = 2 KB
[155]DRAM BOOT DRIVE INFO: V0.33
[158]DRAM CLK = 936 MHz
[160]DRAM Type = 3 (2:DDR2,3:DDR3)
[163]DRAMC read ODT off.
[166]DRAM ODT value: 0x42.
[169]ddr_efuse_type: 0xa
[172]DRAM SIZE =128 M
[174]dram_tpr4:0x0
[176]PLL_DDR_CTRL_REG:0xf8004d00
[179]DRAM_CLK_REG:0xc0000000
[182][TIMING DEBUG] MR2= 0x20
[190]DRAM simple test OK.
[192]rtc standby flag is 0x0, super standby flag is 0x0
[197]dram size =128
[200]card no is 0
[202]sdcard 0 line count 4
[204][mmc]: mmc driver ver 2021-05-21 14:47
[214][mmc]: Wrong media type 0x0
[217][mmc]: ***Try SD card 0***
[225][mmc]: HSSDR52/SDR25 4 bit
[228][mmc]: 50000000 Hz
[231][mmc]: 7386 MB
[232][mmc]: ***SD/MMC 0 init OK!!!***
[324]Loading boot-pkg Succeed(index=0).
[328]Entry_name = u-boot
[335]Entry_name = optee
[338]Entry_name = dtb
[341]mmc not para
[343]Jump to second Boot.
M/TC: OP-TEE version: 6aef7bb2-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Fri Jul 23 09:25:11 UTC 2021 arm
U-Boot 2018.05-g2a1965a (Jul 10 2022 - 02:50:57 +0000) Allwinner Technology
[00.396]CPU: Allwinner Family
[00.399]Model: sun8iw20
[00.401]DRAM: 128 MiB
[00.404]Relocation Offset is: 04ebc000
[00.430]secure enable bit: 0
[00.433]smc_tee_inform_fdt failed with: -65526[00.437]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz
[00.443]gic: sec monitor mode
[00.446]flash init start
[00.448]workmode = 0,storage type = 1
[00.451][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
[00.457][mmc]: get sdc_type fail and use default host:tm1.
[00.463][mmc]: can't find node "mmc0",will add new node
[00.467][mmc]: fdt err returned <no error>
[00.471][mmc]: Using default timing para
[00.475][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.493][mmc]: card_caps:0x3000000a
[00.496][mmc]: host_caps:0x3000003f
[00.499]sunxi flash init ok
[00.502]line:703 init_clocks
[00.505]drv_disp_init
request pwm success, pwm7:pwm7:0x2000c00.
fdt get node offset faill: hdmi
[00.521]unable to map hdmi registers
[00.524]drv_disp_init finish
[00.535]Loading Environment from SUNXI_FLASH... OK
[00.554]boot_gui_init:start
[00.557]set disp.dev2_output_type fail. using defval=0
[00.564]boot_gui_init:finish
partno erro : can't find partition bootloader
54 bytes read in 2 ms (26.4 KiB/s)
[00.577]bmp_name=bootlogo.bmp size 38454
38454 bytes read in 5 ms (7.3 MiB/s)
[00.591]Item0 (Map) magic is bad
[00.594]the secure storage item0 copy0 magic is bad
[00.599]Item0 (Map) magic is bad
[00.602]the secure storage item0 copy1 magic is bad
[00.606]Item0 (Map) magic is bad
[00.609]out of usb burn from boot: not need burn key
List file under ULI/factory
** Unrecognized filesystem type **
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.626]update part info
[00.629]update bootcmd
[00.632]change working_fdt 0x43e7be70 to 0x43e5be70
disable nand error: FDT_ERR_BADPATH
[00.653]update dts
Hit any key to stop autoboot: 1 FDT ERROR:get muxsel err returned FDT_ERR_INTERNAL
sunxi_pwm_pin_set_state, fdt_set_all_pin, ret=-1
[00.753]LCD open finish 0
[01.841]no vendor_boot partition is found
Android's image name: t113-mq_r
[01.852]Starting kernel ...
[01.855][mmc]: MMC Device 2 not found
[01.858][mmc]: mmc 2 not find, so not exit
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.61 (test@test-virtual-machine) (arm-openwrt-linux-muslgnueabi-gcc.bin (OpenWrt/Linaro GCC 6.4-2017.11 2017 -11) 6.4.1, GNU ld (GNU Binutils) 2.27) #1 SMP PREEMPT Wed Feb 21 05:12:28 UTC 2024
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: sun8iw20
[ 0.000000] printk: bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 4 MiB at 0x47c00000
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 15 pages/cpu s30348 r8192 d22900 u61440
[ 0.000000] pcpu-alloc: s30348 r8192 d22900 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 rootdelay=2 l oglevel=8 root=/dev/mmcblk0p5 init=/pseudo_init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs @mmcblk0p5:private@mmcblk0p6:rootfs_data@mmcblk0p7:UDISK@mmcblk0p8 cma=4M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.m ode=normal androidboot.hardware=sun8iw20p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05-g2a1965a(07/10/2022-02:50:57) mb r_offset=1032192 disp_reserve=1536000,0x43f06000 androidboot.dramsize=128
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 106048K/131072K available (6144K kernel code, 304K rwdata, 1576K rodata, 1024K init, 1172K bss, 20928K reserved, 409 6K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x26c/0x3ec with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008007] Switching to timer-based delay loop, resolution 41ns
[ 0.014176] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.023874] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.034231] pid_max: default: 32768 minimum: 301
[ 0.038974] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.046298] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.054619] CPU: Testing write buffer coherency: ok
[ 0.059845] /cpus/cpu@0 missing clock-frequency property
[ 0.065179] /cpus/cpu@1 missing clock-frequency property
[ 0.070510] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.076670] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.083329] rcu: Hierarchical SRCU implementation.
[ 0.088522] smp: Bringing up secondary CPUs ...
[ 0.094133] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.094253] smp: Brought up 1 node, 2 CPUs
[ 0.104077] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.110246] CPU: All CPU(s) started in SVC mode.
[ 0.115312] devtmpfs: initialized
[ 0.129567] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.137703] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.147811] pinctrl core: initialized pinctrl subsystem
[ 0.154003] NET: Registered protocol family 16
[ 0.159967] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.195181] rtc_ccu: sunxi ccu init OK
[ 0.201258] ccu: sunxi ccu init OK
[ 0.205085] r_ccu: sunxi ccu init OK
[ 0.228093] iommu: Default domain type: Translated
[ 0.233135] sunxi iommu: irq = 24
[ 0.237327] SCSI subsystem initialized
[ 0.241265] usbcore: registered new interface driver usbfs
[ 0.246805] usbcore: registered new interface driver hub
[ 0.252231] usbcore: registered new device driver usb
[ 0.257966] Advanced Linux Sound Architecture Driver Initialized.
[ 0.264679] Bluetooth: Core ver 2.22
[ 0.268304] NET: Registered protocol family 31
[ 0.272758] Bluetooth: HCI device and connection manager initialized
[ 0.279137] Bluetooth: HCI socket layer initialized
[ 0.284053] Bluetooth: L2CAP socket layer initialized
[ 0.289121] Bluetooth: SCO socket layer initialized
[ 0.294251] pwm module init!
[ 0.298345] g2d 5410000.g2d: Adding to iommu group 0
[ 0.303820] G2D: rcq version initialized.major:252
[ 0.309401] clocksource: Switched to clocksource arch_sys_counter
[ 0.323858] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[ 0.333095] NET: Registered protocol family 2
[ 0.338002] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.346439] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.354174] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.361264] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.367724] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.374296] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.381492] NET: Registered protocol family 1
[ 0.386781] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator
[ 0.397099] spi spi0: spi0 supply spi not found, using dummy regulator
[ 0.403855] sunxi_spi_resource_get()2116 - [spi0] SPI MASTER MODE
[ 0.410024] sunxi_spi_resource_get()2154 - Failed to get sample mode
[ 0.416386] sunxi_spi_resource_get()2159 - Failed to get sample delay
[ 0.422835] sunxi_spi_resource_get()2163 - sample_mode:-1431633921 sample_delay:-1431633921
[ 0.431255] sunxi_spi_clk_init()2205 - [spi0] mclk 100000000
[ 0.437513] sunxi_spi_probe()2623 - [spi0]: driver probe succeed, base c881f000, irq 39
[ 0.447131] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.458534] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.464574] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.498663] io scheduler mq-deadline registered
[ 0.503246] io scheduler kyber registered
[ 0.508303] [DISP]disp_module_init
[ 0.512275] disp 5000000.disp: Adding to iommu group 0
[ 0.517906] [DISP] parser_disp_init_para,line:1430:
[ 0.517910] of_property_read fb0_width fail
[ 0.526984] [DISP] disp_init,line:2386:
[ 0.526988] smooth display screen:0 type:1 mode:4
[ 0.551634] display_fb_request,fb_id:0
[ 0.557737] Freeing logo buffer memory: 1500K
[ 0.562626] disp_al_manager_apply ouput_type:1
[ 0.567296] sunxi_pwm_enable_dual: can't parse pwm device
[ 0.569698] [DISP]disp_module_init finish
[ 0.577736] sunxi_sid_init()551 - insmod ok
[ 0.582944] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator
[ 0.593107] uart uart0: uart0 supply uart not found, using dummy regulator
[ 0.600296] uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
[ 0.608174] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n
[ 0.616182] printk: console [ttyS0] enabled
[ 0.616182] printk: console [ttyS0] enabled
[ 0.625038] printk: bootconsole [earlycon0] disabled
[ 0.625038] printk: bootconsole [earlycon0] disabled
[ 0.636368] misc dump reg init
[ 0.640921] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator
[ 0.652113] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9
[ 0.659312] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed
[ 0.666638] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed
[ 0.674038] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1)
[ 0.680558] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power.
[ 0.687474] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1)
[ 0.695179] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1
[ 0.703003] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1
[ 0.711085] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled
[ 0.718670] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power.
[ 0.725408] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1)
[ 0.732925] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=210 assert=0
[ 0.740884] [ADDR_MGT] addr_mgt_probe: module version: v1.0.11
[ 0.748063] [ADDR_MGT] addr_mgt_probe: success.
[ 0.753404] dma-buf: Running sanitycheck
[ 0.757777] dma-buf: Running dma_fence
[ 0.762015] sizeof(dma_fence)=48
[ 0.765735] dma-buf: Running dma_fence/sanitycheck
[ 0.771107] dma-buf: Running dma_fence/test_signaling
[ 0.776738] dma-buf: Running dma_fence/test_add_callback
[ 0.782723] dma-buf: Running dma_fence/test_late_add_callback
[ 0.789130] dma-buf: Running dma_fence/test_rm_callback
[ 0.794969] dma-buf: Running dma_fence/test_late_rm_callback
[ 0.801302] dma-buf: Running dma_fence/test_status
[ 0.806643] dma-buf: Running dma_fence/test_error
[ 0.811896] dma-buf: Running dma_fence/test_wait
[ 0.817053] dma-buf: Running dma_fence/test_wait_timeout
[ 0.859415] dma-buf: Running dma_fence/test_stub
[ 0.864581] dma-buf: Running dma_fence/race_signal_callback
[ 0.939411] thread_signal_callback[0] completed 36739 passes, 319 misses
[ 0.946927] thread_signal_callback[1] completed 36747 passes, 330 misses
[ 1.019415] thread_signal_callback[0] completed 40956 passes, 40956 misses
[ 1.027121] thread_signal_callback[1] completed 40939 passes, 40938 misses
[ 1.035344] sunxi-spinand: AW SPINand MTD Layer Version: 2.3 20211223
[ 1.042592] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.10 20200306
[ 1.053956] random: fast init done
[ 1.332385] random: crng init done
[ 2.049474] sunxi-spinand-phy: read id failed : -110
[ 2.055029] spi-nand: probe of spi0.0 failed with error -110
[ 2.061505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.068786] sunxi-ehci: EHCI SUNXI driver
[ 2.073730] get ehci1-controller wakeup-source is fail.
[ 2.079680] sunxi ehci1-controller don't init wakeup source
[ 2.085902] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xc0b68700, 0x:c8837000, irq_no:3a
[ 2.097881] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply drvvbus not found, using dummy regulator
[ 2.110315] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulator
[ 2.122444] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
[ 2.129741] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
[ 2.139652] sunxi-ehci 4200000.ehci1-controller: irq 58, io mem 0x04200000
[ 2.169432] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[ 2.178009] hub 1-0:1.0: USB hub found
[ 2.182250] hub 1-0:1.0: 1 port detected
[ 2.187182] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.194127] sunxi-ohci: OHCI SUNXI driver
[ 2.199057] get ohci1-controller wakeup-source is fail.
[ 2.205015] sunxi ohci1-controller don't init wakeup source
[ 2.211249] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xc0b68990
[ 2.220894] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply drvvbus not found, using dummy regulator
[ 2.233329] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulator
[ 2.245453] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
[ 2.252688] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
[ 2.262495] sunxi-ohci 4200400.ohci1-controller: irq 59, io mem 0x04200400
[ 2.344216] hub 2-0:1.0: USB hub found
[ 2.348439] hub 2-0:1.0: 1 port detected
[ 2.353480] usbcore: registered new interface driver usb-storage
[ 2.360353] i2c /dev entries driver
[ 2.364316] sunxi cedar version 1.1
[ 2.368381] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[ 2.374688] VE: sunxi_cedar_probe power-domain init!!!
[ 2.380436] VE: install start!!!
[ 2.380436]
[ 2.385922] VE: cedar-ve the get irq is 40
[ 2.385922]
[ 2.392360] VE: ve_debug_proc_info:cc2f3fcb, data:1424c7fe, lock:0f8c9b8e
[ 2.392360]
[ 2.401601] VE: install end!!!
[ 2.401601]
[ 2.406650] VE: sunxi_cedar_probe
[ 2.410600] Bluetooth: HCI UART driver ver 2.3
[ 2.415555] Bluetooth: HCI UART protocol H4 registered
[ 2.421309] Bluetooth: HCI UART protocol BCSP registered
[ 2.427229] Bluetooth: HCI UART protocol (null) registered
[ 2.433356] Bluetooth: HCI Realtek H5 protocol initialized
[ 2.441586] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.22 2021-12-20 15:40)
[ 2.451564] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[ 2.457723] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[ 2.464070] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[ 2.470493] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[ 2.476901] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[ 2.483421] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[ 2.489936] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[ 2.496448] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[ 2.503403] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[ 2.508917] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.520059] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[ 2.540167] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.564545] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[ 2.570228] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.582269] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.22 2021-12-20 15:40)
[ 2.584817] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.592190] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8
[ 2.605891] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.609748] sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[ 2.624251] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.627591] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[ 2.645567] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[ 2.651997] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[ 2.658498] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[ 2.661131] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.665018] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[ 2.675839] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 2.680474] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[ 2.680516] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[ 2.692014] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 2.718992] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[ 2.730773] mmc0: new high speed SDHC card at address 1234
[ 2.737463] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.749173] mmcblk0: mmc0:1234 SA08G 7.21 GiB
[ 2.754242] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[ 2.757720] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[ 2.774394] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.798589] sunxi-mmc 4021000.sdmmc: detmode:manually by software
[ 2.806128] exFAT: Version 1.3.0
[ 2.806241] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[ 2.811607] sun8iw20-pinctrl 2000000.pinctrl: pin PG18 already requested by 2000000.pinctrl:210; cannot claim for 2036000.spdif
[ 2.829431] sun8iw20-pinctrl 2000000.pinctrl: pin-210 (2036000.spdif) status -22
[ 2.830227] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[ 2.837697] sun8iw20-pinctrl 2000000.pinctrl: could not request pin 210 (PG18) from group PG18 on device 2000000.pinctrl
[ 2.856755] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.868343] sunxi-spdif 2036000.spdif: Error applying setting, reverse things back
[ 2.876841] sunxi-spdif: probe of 2036000.spdif failed with error -22
[ 2.878086] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.884636] [AUDIOCODEC][sunxi_codec_parse_params][2412]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level :1, pa_pwr_level:1
[ 2.884636]
[ 2.912728] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.919474] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.926196] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.932916] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.932941] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 2.950731] [AUDIOCODEC][sunxi_codec_parse_params][2448]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[ 2.962060] [AUDIOCODEC][sunxi_internal_codec_probe][2609]:codec probe finished
[ 2.971116] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[ 2.980913] [SNDCODEC][sunxi_card_init][583]:card init finished
[ 2.988013] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[ 2.998879] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input0
[ 3.010762] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished
[ 3.020381] NET: Registered protocol family 10
[ 3.026275] Segment Routing with IPv6
[ 3.030428] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch
[ 3.037863] NET: Registered protocol family 17
[ 3.043014] Bluetooth: RFCOMM TTY layer initialized
[ 3.048466] Bluetooth: RFCOMM socket layer initialized
[ 3.054260] Bluetooth: RFCOMM ver 1.11
[ 3.059029] Registering SWP/SWPB emulation handler
[ 3.078955] sunxi-i2c sunxi-i2c2: sunxi-i2c2 supply twi not found, using dummy regulator
[ 3.088767] sunxi-i2c sunxi-i2c2: probe success
[ 3.094884] sun8iw20-pinctrl 2000000.pinctrl: pin PG18 already requested by 2000000.pinctrl:210; cannot claim for 2036000.spdif
[ 3.107727] sun8iw20-pinctrl 2000000.pinctrl: pin-210 (2036000.spdif) status -22
[ 3.115993] sun8iw20-pinctrl 2000000.pinctrl: could not request pin 210 (PG18) from group PG18 on device 2000000.pinctrl
[ 3.128230] sunxi-spdif 2036000.spdif: Error applying setting, reverse things back
[ 3.136711] sunxi-spdif: probe of 2036000.spdif failed with error -22
[ 3.144447] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator
[ 3.156864] get ehci0-controller wakeup-source is fail.
[ 3.162842] sunxi ehci0-controller don't init wakeup source
[ 3.169061] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0b681e0, 0x:c88a2000, irq_no:38
[ 3.181006] [sunxi-ehci0]: Not init ehci0
[ 3.185803] get ohci0-controller wakeup-source is fail.
[ 3.191739] sunxi ohci0-controller don't init wakeup source
[ 3.197955] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xc0b68470
[ 3.207574] [sunxi-ohci0]: Not init ohci0
[ 3.213646] get usb_detect_mode is fail, -22
[ 3.218438] get det_vbus is fail, -84
[ 3.222546] get id is fail, -84
[ 3.228003] clk: Not disabling unused clocks
[ 3.233404] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.243075] cfg80211: failed to load regulatory.db
[ 3.243094] ALSA device list:
[ 3.251767] #0: audiocodec
[ 3.254985] alloc_fd: slot 0 not NULL!
[ 3.259369] Waiting 2 sec before mounting root device...
[ 4.289438]
[ 4.289438] insmod_device_driver
[ 4.289438]
[ 4.296594] sunxi_usb_udc 4100000.udc-controller: 4100000.udc-controller supply udc not found, using dummy regulator
[ 4.308670] device_chose finished 142!
[ 5.334733] VFS: Mounted root (squashfs filesystem) readonly on device 179:5.
[ 5.345212] devtmpfs: mounted
[ 5.350449] Freeing unused kernel memory: 1024K
[ 5.379562] Run /pseudo_init as init process
mount: mounting none on /dev failed: Resource busy
mount: mounting /dev/by-name/rootfs_data on /overlay failed: Invalid argument
Mount Failed: formating /dev/by-name/rootfs_data to ext4 ...
mke2fs 1.46.4 (18-Aug-2021)
[ 7.218199] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[ 7.237360] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode. Opts: data=journal
can't run '/etc/preinit': No such file or directory
mount: mounting proc on /proc failed: Resource busy
mount: mounting tmpfs on /run failed: No such file or directory
hostname: can't open '/etc/hostname': No such file or directory
------run rc.preboot file-----
[ 31.335943] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
------run rc.modules file-----
insmod: can't insert '/lib/modules/5.4.61/usb-storage.ko': No such file or directory
[ 31.365303] sunxi_gpadc_init,2151, success
[ 31.370250] sunxi_gpadc_setup: get channel scan data failed
[ 31.376834] input: sunxi-gpadc0 as /devices/virtual/input/input1
[ 31.389210] get ctp_power is fail, -22
[ 31.393499] get ctp_power_ldo_vol is fail, -22
[ 31.398474] sunxi_ctp_startup: ctp_power_io is invalid.
[ 31.404369] get ctp_gesture_wakeup fail, no gesture wakeup
[ 31.410530] gt9xxnew_ts 2-0014: 2-0014 supply ctp not found, using dummy regulator
[ 31.579468] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 31.587561] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 31.595205] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 31.603292] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 31.610923] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 31.619013] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 31.626645] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 31.634734] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 31.642365] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 31.650457] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 31.658035] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[ 31.819410] <<-GTP-ERROR->> GTP i2c test failed time 1.
[ 31.849449] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 31.857532] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 31.865166] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 31.873254] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 31.880891] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 31.888968] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 31.896610] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 31.904696] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 31.912330] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 31.920418] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 31.927996] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[ 32.089416] <<-GTP-ERROR->> GTP i2c test failed time 2.
[ 32.119455] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.127538] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.135215] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.143314] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.150955] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.159035] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.166671] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.174757] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.182408] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.190500] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.198077] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[ 32.359408] <<-GTP-ERROR->> GTP i2c test failed time 3.
[ 32.389454] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.397534] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.405169] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.413254] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.420892] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.428973] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.436606] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.444701] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.452333] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.460416] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.467997] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[ 32.629410] <<-GTP-ERROR->> GTP i2c test failed time 4.
[ 32.659449] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.667536] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.675174] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.683258] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.690898] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.698981] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.706617] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.714700] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.722333] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[ 32.730418] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[ 32.738004] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[ 32.899407] <<-GTP-ERROR->> GTP i2c test failed time 5.
[ 32.929407] I2C communication ERROR!
[ 32.929432] regulator-dummy: Underflow of regulator enable count
[ 32.940312] gt9xxnew_ts: probe of 2-0014 failed with error -1
[ 33.022508] Error: Driver 'gt9xxnew_ts' is already registered, aborting...
insmod: can't insert '/lib/modules/5.4.61/gt9xxnew_ts.ko': Operation not permitted
[ 33.251568] sunxi-rfkill soc@3000000:rfkill@0: wlan power on success
[ 33.358677] sunxi-rfkill soc@3000000:rfkill@0: bus_index: 1
[ 33.364950] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 33.376542] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[ 33.396702] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 33.421162] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 33.435701] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 33.448923] sunxi-mmc 4021000.sdmmc: card claims to support voltages below defined range
[ 33.467592] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 33.479133] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 33.490913] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[ 33.503427] mmc1: new high speed SDIO card at address 0001
[ 33.809447] usb1-vbus: disabling
Successfully initialized wpa_supplicant
------run rc.final file-----
Trying to connect to SWUpdate...
mount: mounting /dev/mmcblk0p1 on /mnt/extsd failed: No such file or directory
BusyBox v1.27.2 () built-in shell (ash)
------run profile file-----
_____ _ __ _
|_ _||_| ___ _ _ | | |_| ___ _ _ _ _
| | _ | || | | |__ | || || | ||_'_|
| | | || | || _ | |_____||_||_|_||___||_,_|
|_| |_||_|_||_|_| Tina is Based on OpenWrt!
----------------------------------------------
Tina Linux (Neptune, 5C1C9C53)
----------------------------------------------
nodev debugfs
root@TinaLinux:/#
root@TinaLinux:/#
root@TinaLinux:/#
root@TinaLinux:/#
root@TinaLinux:/# [ 38.183258] file system registered
[ 38.201990] configfs-gadget 4100000.udc-controller: failed to start g1: -19
sh: write error: No such device
[ 38.231916] read descriptors
[ 38.235178] read strings
swu_param: ####
swu_software: ####
swu_mode: ####
no swupdate_cmd to run, wait for next swupdate
root@TinaLinux:/#
@qichunren
Copy link
Author 

[88]HELLO! BOOT0 is starting!
[90]BOOT0 commit : 1417090655
[93]set pll start
[95]fix vccio detect value:0xc0
[102]periph0 has been enabled
[105]set pll end
[107][pmu]: bus read error
[109]board init ok
[111]enable_jtag
[113]ZQ value = 0x2f
[115]get_pmu_exist() = -1
[118]ddr_efuse_type: 0xa
[120]trefi:7.8ms
[122][AUTO DEBUG] single rank and full DQ!
[126]ddr_efuse_type: 0xa
[129]trefi:7.8ms
[131][AUTO DEBUG] rank 0 row = 13
[134][AUTO DEBUG] rank 0 bank = 8
[138][AUTO DEBUG] rank 0 page size = 2 KB
[142]DRAM BOOT DRIVE INFO: V0.33
[145]DRAM CLK = 792 MHz
[147]DRAM Type = 3 (2:DDR2,3:DDR3)
[150]DRAMC read ODT  off.
[153]DRAM ODT value: 0x42.
[155]ddr_efuse_type: 0xa
[159]DRAM SIZE =128 M
[161]dram_tpr4:0x0
[162]PLL_DDR_CTRL_REG:0xf8004100
[166]DRAM_CLK_REG:0xc0000000
[168][TIMING DEBUG] MR2= 0x18
[176]DRAM simple test OK.
[179]rtc standby flag is 0x0, super standby flag is 0x0
[184]dram size =128
[187]card no is 0
[188]sdcard 0 line count 1
[191][mmc]: mmc driver ver 2021-05-21 14:47
[200][mmc]: Wrong media type 0x0
[203][mmc]: ***Try SD card 0***
[212][mmc]: HSSDR52/SDR25 1 bit
[215][mmc]: 50000000 Hz
[217][mmc]: 7386 MB
[219][mmc]: ***SD/MMC 0 init OK!!!***
[474]Loading boot-pkg Succeed(index=0).
[478]Entry_name        = u-boot
[485]Entry_name        = optee
[489]Entry_name        = dtb
[492]mmc not para
[494]Jump to second Boot.
M/TC: OP-TEE version: 8b49ce62-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Fri Aug 12 08:24:15 UTC 2022 arm


U-Boot 2018.07-gd9e6718-dirty (Feb 22 2024 - 23:46:05 +0800) Allwinner Technology

[00.546]CPU:   Allwinner Family
[00.549]Model: sun8iw20
[00.551]DRAM:  128 MiB
[00.554]Relocation Offset is: 04ec4000
[00.581]secure enable bit: 0
E/TC:0   fdt_getprop_u32:343 prop trace_level not found
[00.595]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.601]gic: sec monitor mode
sunxi flash map init
SPI ALL:   ready
[00.608]flash init start
[00.610]workmode = 0,storage type = 1
get value error
[00.615][mmc]: mmc driver ver uboot2018:2022-12-07 18:56:00
[00.621][mmc]: get sdc_type fail and use default host:tm1.
[00.627][mmc]: can't find node "mmc0",will add new node
[00.631][mmc]: fdt err returned <no error>
[00.635][mmc]: Using default timing para
[00.639][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.657][mmc]: card_caps:0x3000000a
[00.660][mmc]: host_caps:0x3000003f
[00.663]sunxi flash init ok
[00.666]line:703 init_clocks
[00.669]drv_disp_init
[00.674]handle_num : 6
request pwm success, pwm7:pwm7:0x2000c00.
[00.684]drv_disp_init finish
[00.694]Loading Environment from SUNXI_FLASH... OK
[00.713]boot_gui_init:start
[00.716]set disp.dev2_output_type fail. using defval=0
[00.722]set disp.fb0_rot_used fail. using defval=0
[00.727]set disp.fb0_rot_degree fail. using defval=0
[00.732]boot_gui_init:finish
partno erro : can't find partition bootloader
[00.742]bmp_name=bootlogo.bmp size 4096054
[00.903]LCD open finish
no support big size bmp[800x1280] on fb[1024x600]
[00.927]show bmp on fb failed !-1
[00.931]Item0 (Map) magic is bad
[00.934]the secure storage item0 copy0 magic is bad
[00.939]Item0 (Map) magic is bad
[00.942]the secure storage item0 copy1 magic is bad
[00.947]Item0 (Map) magic is bad
secure storage read hdcpkey fail
[00.953]secure storage read hdcpkey fail with:-1
[00.957]usb burn from boot
delay time 0
weak:otg_phy_config
[00.968]usb prepare ok
[01.271]overtime
[01.274]do_burn_from_boot usb : no usb exist
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
root_partition is rootfs
set root to /dev/mmcblk0p5
[01.311]update part info
[01.314]update bootcmd
[01.321]change working_fdt 0x45e83e70 to 0x45e63e70
disable nand error: FDT_ERR_BADPATH
get value error
[01.331][mmc]: get sunxi-mmc0 string failed
[01.335]The storage not support sample function
[01.352]update dts
Hit any key to stop autoboot:  0
[07.559]no vendor_boot partition is found
Android's image name: sun8i_arm
ERROR: reserving fdt memory region failed (addr=41900000 size=200000)
ERROR: reserving fdt memory region failed (addr=41c00000 size=400000)
ERROR: reserving fdt memory region failed (addr=41b00000 size=100000)
ERROR: reserving fdt memory region failed (addr=45f0e000 size=258000)
[07.597]Starting kernel ...

[07.600][mmc]: MMC Device 2 not found
[07.603][mmc]: mmc 2 not find, so not exit
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.61 (qichunren@qichunren-VirtualBox) (arm-linux-gnueabi-gcc (Linaro GCC 5.3-2016.05) 5.3.1 20160412, GNU ld (Linaro_Binutils-2016.05) 2.25.0 Linaro 2016_02) #1 SMP PREEMPT Thu Feb 22 17:13:48 CST 2024
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: sun8iw20
[    0.000000] printk: bootconsole [earlycon0] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 8 MiB at 0x47800000
[    0.000000] On node 0 totalpages: 32768
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 15 pages/cpu s30784 r8192 d22464 u61440
[    0.000000] pcpu-alloc: s30784 r8192 d22464 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p5 init=/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:dsp0@mmcblk0p6:UDISK@mmcblk0p7 cma=8M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun8iw20p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.07-gd9e6718-dirty(02/22/2024-23:46:05) mbr_offset=1032192 disp_reserve=2457600,0x45f0e000 androidboot.dramsize=128
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 98996K/131072K available (7168K kernel code, 305K rwdata, 2268K rodata, 1024K init, 1169K bss, 23884K reserved, 8192K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x24c/0x3cc with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008009] Switching to timer-based delay loop, resolution 41ns
[    0.014200] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.023978] Console: colour dummy device 80x30
[    0.028478] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.038849] pid_max: default: 32768 minimum: 301
[    0.043601] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.050928] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.059278] CPU: Testing write buffer coherency: ok
[    0.064541] /cpus/cpu@0 missing clock-frequency property
[    0.069879] /cpus/cpu@1 missing clock-frequency property
[    0.075233] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.081476] Setting up static identity map for 0x40100000 - 0x40100060
[    0.088168] rcu: Hierarchical SRCU implementation.
[    0.093450] smp: Bringing up secondary CPUs ...
[    0.099249] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.099407] smp: Brought up 1 node, 2 CPUs
[    0.109250] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.115438] CPU: All CPU(s) started in SVC mode.
[    0.120567] devtmpfs: initialized
[    0.136862] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.145063] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.154945] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.162226] pinctrl core: initialized pinctrl subsystem
[    0.168881] NET: Registered protocol family 16
[    0.174966] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.212404] rtc_ccu: sunxi ccu init OK
[    0.218496] ccu: sunxi ccu init OK
[    0.222630] r_ccu: sunxi ccu init OK
[    0.262903] sun6i-dma 3002000.dma-controller: sunxi dma probed
[    0.273169] iommu: Default domain type: Translated
[    0.278287] sunxi iommu: irq = 24
[    0.283075] SCSI subsystem initialized
[    0.287211] usbcore: registered new interface driver usbfs
[    0.292866] usbcore: registered new interface driver hub
[    0.298301] usbcore: registered new device driver usb
[    0.303559] videodev: Linux video capture interface: v2.00
[    0.310126] Advanced Linux Sound Architecture Driver Initialized.
[    0.317174] Bluetooth: Core ver 2.22
[    0.320860] NET: Registered protocol family 31
[    0.325302] Bluetooth: HCI device and connection manager initialized
[    0.331722] Bluetooth: HCI socket layer initialized
[    0.336599] Bluetooth: L2CAP socket layer initialized
[    0.341665] Bluetooth: SCO socket layer initialized
[    0.346829] pwm module init!
[    0.351201] g2d 5410000.g2d: Adding to iommu group 0
[    0.356623] G2D: rcq version initialized.major:251
[    0.362412] clocksource: Switched to clocksource arch_sys_counter
[    0.378147] sun8iw20-pinctrl pio: initialized sunXi PIO driver
[    0.397910] thermal_sys: Registered thermal governor 'step_wise'
[    0.397917] thermal_sys: Registered thermal governor 'user_space'
[    0.403994] thermal_sys: Registered thermal governor 'power_allocator'
[    0.410648] NET: Registered protocol family 2
[    0.422152] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.430555] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.438234] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.445328] TCP: Hash tables configured (established 1024 bind 1024)
[    0.451780] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.458366] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.465582] NET: Registered protocol family 1
[    0.471041] sun8iw20-pinctrl pio: pio supply vcc-pc not found, using dummy regulator
[    0.479369] spi spi0: spi0 supply spi not found, using dummy regulator
[    0.486240] sunxi_spi_resource_get()2259 - [spi0] SPI MASTER MODE
[    0.492393] sunxi_spi_resource_get()2297 - Failed to get sample mode
[    0.498806] sunxi_spi_resource_get()2302 - Failed to get sample delay
[    0.505325] sunxi_spi_resource_get()2306 - sample_mode:-1431633921 sample_delay:-1431633921
[    0.513720] sunxi_spi_request_dma()988 - [spi0] Request DMA channel dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
[    0.524589] sunxi_spi_clk_init()2356 - [spi0] mclk 100000000
[    0.531098] sunxi_spi_probe()2809 - [spi0]: driver probe succeed, base c881f000, irq 39
[    0.541037] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.556392] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.562545] ntfs: driver 2.1.32 [Flags: R/W].
[    0.567205] fuse: init (API version 7.31)
[    0.601995] io scheduler mq-deadline registered
[    0.607180] io scheduler kyber registered
[    0.612729] [DISP]disp_module_init
[    0.616710] disp 5000000.disp: Adding to iommu group 0
[    0.622537] [DISP] parser_disp_init_para,line:1407:
[    0.622541] of_property_read fb0_width fail
[    0.631634] [DISP] disp_init,line:2331:
[    0.631638] smooth display screen:0 type:1 mode:4
[    0.656373] [pq_init]+++
[    0.659189] display_fb_request,fb_id:0
[    0.669056] disp_al_manager_apply ouput_type:1
[    0.673022] [DISP]disp_module_init finish
[    0.674054] sun8iw20-pinctrl pio: pio supply vcc-pd not found, using dummy regulator
[    0.679216] sunxi_sid_init()783 - insmod ok
[    0.691446] Freeing logo buffer memory: 2400K
[    0.692067] sun8iw20-pinctrl pio: pio supply vcc-pe not found, using dummy regulator
[    0.704096] uart uart0: uart0 supply uart not found, using dummy regulator
[    0.711358] uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
[    0.719273] sw_console_setup()1831 - console setup baud 115200 parity n bits 8, flow n
[    0.727300] printk: console [ttyS0] enabled
[    0.727300] printk: console [ttyS0] enabled
[    0.736168] printk: bootconsole [earlycon0] disabled
[    0.736168] printk: bootconsole [earlycon0] disabled
[    0.747546] uart uart4: uart4 supply uart not found, using dummy regulator
[    0.755612] uart4: ttyS4 at MMIO 0x2501000 (irq = 35, base_baud = 1500000) is a SUNXI
[    0.765336] misc dump reg init
[    0.770262] sunxi-spinand: AW SPINand MTD Layer Version: 2.3 20211223
[    0.777522] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.11 20231016
[    0.791230] random: fast init done
[    1.047309] random: crng init done
[    1.782437] sunxi-spinand-phy: read id failed : -110
[    1.787987] spi-nand: probe of spi0.0 failed with error -110
[    1.794834] libphy: Fixed MDIO Bus: probed
[    1.799510] usbcore: registered new interface driver asix
[    1.805637] usbcore: registered new interface driver ax88179_178a
[    1.812506] usbcore: registered new interface driver cdc_ether
[    1.819073] usbcore: registered new interface driver net1080
[    1.825481] usbcore: registered new interface driver cdc_subset
[    1.832162] usbcore: registered new interface driver zaurus
[    1.838471] usbcore: registered new interface driver cdc_ncm
[    1.844788] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.852069] sunxi-ehci: EHCI SUNXI driver
[    1.856890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.863818] sunxi-ohci: OHCI SUNXI driver
[    1.869559] sunxi-rtc 7090000.rtc: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1
[    1.880815] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    1.891495] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    1.902733] sunxi-rtc 7090000.rtc: registered as rtc0
[    1.908387] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    1.918991] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T00:00:09 UTC (9)
[    1.927860] sunxi-rtc 7090000.rtc: sunxi rtc probed
[    1.933693] i2c /dev entries driver
[    1.939521] usbcore: registered new interface driver uvcvideo
[    1.945948] USB Video Class driver (1.1.1)
[    1.950535] sunxi cedar version 1.1
[    1.954650] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[    1.960924] VE: sunxi_cedar_probe power-domain init!!!
[    1.966680] VE: install start!!!
[    1.966680]
[    1.972221] VE: cedar-ve the get irq is 40
[    1.972221]
[    1.978689] VE: ve_debug_proc_info:3e298455, data:dd1b5b35, lock:b349efd3
[    1.978689]
[    1.987925] VE: install end!!!
[    1.987925]
[    1.992978] VE: sunxi_cedar_probe
[    1.997903] sunxi-wdt 20500a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    2.006987] Bluetooth: HCI UART driver ver 2.3
[    2.011935] Bluetooth: HCI UART protocol H4 registered
[    2.017989] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10
[    2.027595] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.25 2022-6-21 13:40)
[    2.037514] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[    2.043701] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[    2.050002] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[    2.056410] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[    2.062813] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[    2.069301] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[    2.075803] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[    2.082288] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[    2.089291] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[    2.094773] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail
[    2.101383] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.112490] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[    2.132470] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.156849] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[    2.162534] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.175060] usbcore: registered new interface driver usbhid
[    2.181284] usbhid: USB HID core driver
[    2.182497] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.185592] exFAT: Version 1.3.0
[    2.201331] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.203612] [AUDIOCODEC][sunxi_codec_parse_params][2437]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1
[    2.203612]
[    2.229994] [AUDIOCODEC][sunxi_codec_parse_params][2473]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[    2.231232] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.241348] [AUDIOCODEC][sunxi_internal_codec_probe][2634]:codec probe finished
[    2.261769] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[    2.271573] [SNDCODEC][sunxi_card_init][583]:card init finished
[    2.278754] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[    2.289931] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input0
[    2.302550] NET: Registered protocol family 17
[    2.307735] Bluetooth: RFCOMM TTY layer initialized
[    2.313210] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.322145] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.322250] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.333585] Bluetooth: RFCOMM socket layer initialized
[    2.333620] Bluetooth: RFCOMM ver 1.11
[    2.345353] mmc0: new high speed SDHC card at address 1234
[    2.351563] Registering SWP/SWPB emulation handler
[    2.356452] mmcblk0: mmc0:1234 SA08G 7.21 GiB
[    2.363906] tv_probe()1540 - of_property_read_string tv_power failed!
[    2.379481] get_key_map_info()210 - Failed to find "tvout" in dts.
[    2.386551]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    2.391471] tv probe finished!
[    2.415250] sunxi-i2c 2502400.twi: 2502400.twi supply twi not found, using dummy regulator
[    2.425538] sunxi-i2c 2502400.twi: probe success
[    2.431723] sunxi-thermal 2009400.ths: sun8iw20 cp version:17
[    2.438864] sun8iw20-pinctrl pio: pio supply vcc-pg not found, using dummy regulator
[    2.473365] get drvvbus-en is fail, 22
[    2.477576] get ehci0-controller wakeup-source is fail.
[    2.483610] sunxi ehci0-controller don't init wakeup source
[    2.489867] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0d69a28, 0x:c88fb000, irq_no:33
[    2.501899] [sunxi-ehci0]: Not init ehci0
[    2.506825] get drvvbus-en is fail, 22
[    2.511031] get ohci0-controller wakeup-source is fail.
[    2.517032] sunxi ohci0-controller don't init wakeup source
[    2.523305] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xc0d69cd8
[    2.532975] [sunxi-ohci0]: Not init ohci0
[    2.538448] otg manager soc@3000000:usbc0@0: soc@3000000:usbc0@0 supply usbc not found, using dummy regulator
[    2.552244] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.561961] clk: Not disabling unused clocks
[    2.566774] ALSA device list:
[    2.570100]   #0: audiocodec
[    2.573346] cfg80211: failed to load regulatory.db
[    2.578799] alloc_fd: slot 0 not NULL!
[    2.588179] [EXFAT] trying to mount...
[    2.593134] VFS: Cannot open root device "mmcblk0p5" or unknown-block(179,5): error -5
[    2.602015] Please append a correct "root=" boot option; here are the available partitions:
[    2.611421] b300         7563264 mmcblk0
[    2.611425]  driver: mmcblk
[    2.619061]   b301           17136 mmcblk0p1 a0085546-4166-744a-a353-fca9272b8e45
[    2.619063]
[    2.629127]   b302            1008 mmcblk0p2 a0085546-4166-744a-a353-fca9272b8e46
[    2.629129]
[    2.639192]   b303            1008 mmcblk0p3 a0085546-4166-744a-a353-fca9272b8e47
[    2.639193]
[    2.649255]   b304           12600 mmcblk0p4 a0085546-4166-744a-a353-fca9272b8e48
[    2.649257]
[    2.659319]   b305           53676 mmcblk0p5 a0085546-4166-744a-a353-fca9272b8e49
[    2.659321]
[    2.669383]   b306            1008 mmcblk0p6 a0085546-4166-744a-a353-fca9272b8e4a
[    2.669384]
[    2.679436]   b307         7455072 mmcblk0p7 a0085546-4166-744a-a353-fca9272b8e4b
[    2.679438]
[    2.689503] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,5)
[    2.698967] CPU0: stopping
[    2.702003] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.61 #1
[    2.708635] Hardware name: Generic DT based system
[    2.714027] [<c010e3b8>] (unwind_backtrace) from [<c010a97c>] (show_stack+0x10/0x14)
[    2.722714] [<c010a97c>] (show_stack) from [<c06e7f64>] (dump_stack+0x7c/0x98)
[    2.730817] [<c06e7f64>] (dump_stack) from [<c010c770>] (handle_IPI+0xc0/0x168)
[    2.739015] [<c010c770>] (handle_IPI) from [<c0391430>] (gic_handle_irq+0x70/0x78)
[    2.747508] [<c0391430>] (gic_handle_irq) from [<c01021cc>] (__irq_svc+0x6c/0xa8)
[    2.755895] Exception stack(0xc0c01f40 to 0xc0c01f88)
[    2.761559] 1f40: 00002128 c76b84f4 00000000 c0114da0 00000001 c0c00000 c0c03de8 c0c03e24
[    2.770729] 1f60: 00000000 c77ff600 c0b280c0 00000000 c0d53830 c0c01f90 c0108078 c010807c
[    2.779894] 1f80: 60000113 ffffffff
[    2.783808] [<c01021cc>] (__irq_svc) from [<c010807c>] (arch_cpu_idle+0x2c/0x38)
[    2.792105] [<c010807c>] (arch_cpu_idle) from [<c013e388>] (do_idle+0xb8/0x120)
[    2.800304] [<c013e388>] (do_idle) from [<c013e68c>] (cpu_startup_entry+0x18/0x1c)
[    2.808795] [<c013e68c>] (cpu_startup_entry) from [<c0b00c64>] (start_kernel+0x33c/0x3cc)
[    2.817966] [<c0b00c64>] (start_kernel) from [<00000000>] (0x0)
[    2.824619] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,5) ]---

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment