Created
April 28, 2018 09:04
-
-
Save qknight/9b2307c843c15f6bb7f4a015225d9c98 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # This Makefile is for the NetAddr::IP::Util extension to perl. | |
| # | |
| # It was generated automatically by MakeMaker version | |
| # 7.1002 (Revision: 71002) from the contents of | |
| # Makefile.PL. Don't edit this file, edit Makefile.PL instead. | |
| # | |
| # ANY CHANGES MADE HERE WILL BE LOST! | |
| # | |
| # MakeMaker ARGV: (q[PREFIX=/nix/store/gzbb4v0qg5vdfd3gpcjkyf4prkfzrhna-perl-NetAddr-IP-4.079], q[INSTALLDIRS=site], q[PERL=/nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin/perl], q[FULLPERL=/nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin/perl]) | |
| # | |
| # MakeMaker Parameters: | |
| # BUILD_REQUIRES => { } | |
| # CONFIGURE_REQUIRES => { } | |
| # LIBS => [q[]] | |
| # NAME => q[NetAddr::IP::Util] | |
| # PREREQ_PM => { } | |
| # TEST_REQUIRES => { } | |
| # VERSION_FROM => q[Util.pm] | |
| # clean => { FILES=>q[*.bs *.o *.c *~ tmp* Util_IS.pm localperl.h auto*] } | |
| # depend => { Util.c=>q[ localconf.h config.h localperl.h ] } | |
| # dist => { COMPRESS=>q[gzip], SUFFIX=>q[gz] } | |
| # realclean => { FILES=>q[config.h config.log config.status] } | |
| # --- MakeMaker post_initialize section: | |
| # --- MakeMaker const_config section: | |
| # These definitions are from config.sh (via /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/x86_64-linux-thread-multi/Config.pm). | |
| # They may have been overridden via Makefile.PL or on the command line. | |
| AR = ar | |
| CC = cc | |
| CCCDLFLAGS = -fPIC | |
| CCDLFLAGS = -Wl,-E -Wl,-rpath,/nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/x86_64-linux-thread-multi/CORE | |
| DLEXT = so | |
| DLSRC = dl_dlopen.xs | |
| EXE_EXT = | |
| FULL_AR = ar | |
| LD = cc | |
| LDDLFLAGS = -shared -O2 -L/nix/store/84h2zni7h805k0i1ys2bba3dsp1cqnhh-glibc-2.26-131/lib -fstack-protector-strong | |
| LDFLAGS = -fstack-protector-strong -L/nix/store/84h2zni7h805k0i1ys2bba3dsp1cqnhh-glibc-2.26-131/lib | |
| LIBC = | |
| LIB_EXT = .a | |
| OBJ_EXT = .o | |
| OSNAME = linux | |
| OSVERS = 4.9.75-rc1 | |
| RANLIB = : | |
| SITELIBEXP = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/site_perl/5.24.3 | |
| SITEARCHEXP = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/site_perl/5.24.3/x86_64-linux-thread-multi | |
| SO = so | |
| VENDORARCHEXP = | |
| VENDORLIBEXP = | |
| # --- MakeMaker constants section: | |
| AR_STATIC_ARGS = cr | |
| DIRFILESEP = / | |
| DFSEP = $(DIRFILESEP) | |
| NAME = NetAddr::IP::Util | |
| NAME_SYM = NetAddr_IP_Util | |
| VERSION = 1.53 | |
| VERSION_MACRO = VERSION | |
| VERSION_SYM = 1_53 | |
| DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\" | |
| XS_VERSION = 1.53 | |
| XS_VERSION_MACRO = XS_VERSION | |
| XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\" | |
| INST_ARCHLIB = ../../blib/arch | |
| INST_SCRIPT = ../../blib/script | |
| INST_BIN = ../../blib/bin | |
| INST_LIB = ../../blib/lib | |
| INST_MAN1DIR = ../../blib/man1 | |
| INST_MAN3DIR = ../../blib/man3 | |
| MAN1EXT = 1 | |
| MAN3EXT = 3 | |
| INSTALLDIRS = site | |
| DESTDIR = | |
| PREFIX = $(SITEPREFIX) | |
| PERLPREFIX = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3 | |
| SITEPREFIX = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3 | |
| VENDORPREFIX = | |
| INSTALLPRIVLIB = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3 | |
| DESTINSTALLPRIVLIB = $(DESTDIR)$(INSTALLPRIVLIB) | |
| INSTALLSITELIB = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/site_perl/5.24.3 | |
| DESTINSTALLSITELIB = $(DESTDIR)$(INSTALLSITELIB) | |
| INSTALLVENDORLIB = | |
| DESTINSTALLVENDORLIB = $(DESTDIR)$(INSTALLVENDORLIB) | |
| INSTALLARCHLIB = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/x86_64-linux-thread-multi | |
| DESTINSTALLARCHLIB = $(DESTDIR)$(INSTALLARCHLIB) | |
| INSTALLSITEARCH = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/site_perl/5.24.3/x86_64-linux-thread-multi | |
| DESTINSTALLSITEARCH = $(DESTDIR)$(INSTALLSITEARCH) | |
| INSTALLVENDORARCH = | |
| DESTINSTALLVENDORARCH = $(DESTDIR)$(INSTALLVENDORARCH) | |
| INSTALLBIN = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin | |
| DESTINSTALLBIN = $(DESTDIR)$(INSTALLBIN) | |
| INSTALLSITEBIN = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin | |
| DESTINSTALLSITEBIN = $(DESTDIR)$(INSTALLSITEBIN) | |
| INSTALLVENDORBIN = | |
| DESTINSTALLVENDORBIN = $(DESTDIR)$(INSTALLVENDORBIN) | |
| INSTALLSCRIPT = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin | |
| DESTINSTALLSCRIPT = $(DESTDIR)$(INSTALLSCRIPT) | |
| INSTALLSITESCRIPT = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin | |
| DESTINSTALLSITESCRIPT = $(DESTDIR)$(INSTALLSITESCRIPT) | |
| INSTALLVENDORSCRIPT = | |
| DESTINSTALLVENDORSCRIPT = $(DESTDIR)$(INSTALLVENDORSCRIPT) | |
| INSTALLMAN1DIR = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/share/man/man1 | |
| DESTINSTALLMAN1DIR = $(DESTDIR)$(INSTALLMAN1DIR) | |
| INSTALLSITEMAN1DIR = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/share/man/man1 | |
| DESTINSTALLSITEMAN1DIR = $(DESTDIR)$(INSTALLSITEMAN1DIR) | |
| INSTALLVENDORMAN1DIR = | |
| DESTINSTALLVENDORMAN1DIR = $(DESTDIR)$(INSTALLVENDORMAN1DIR) | |
| INSTALLMAN3DIR = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/share/man/man3 | |
| DESTINSTALLMAN3DIR = $(DESTDIR)$(INSTALLMAN3DIR) | |
| INSTALLSITEMAN3DIR = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/share/man/man3 | |
| DESTINSTALLSITEMAN3DIR = $(DESTDIR)$(INSTALLSITEMAN3DIR) | |
| INSTALLVENDORMAN3DIR = | |
| DESTINSTALLVENDORMAN3DIR = $(DESTDIR)$(INSTALLVENDORMAN3DIR) | |
| PERL_LIB = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3 | |
| PERL_ARCHLIB = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/x86_64-linux-thread-multi | |
| PERL_ARCHLIBDEP = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/x86_64-linux-thread-multi | |
| LIBPERL_A = libperl.a | |
| FIRST_MAKEFILE = Makefile | |
| MAKEFILE_OLD = Makefile.old | |
| MAKE_APERL_FILE = Makefile.aperl | |
| PERLMAINCC = $(CC) | |
| PERL_INC = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/x86_64-linux-thread-multi/CORE | |
| PERL_INCDEP = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/x86_64-linux-thread-multi/CORE | |
| PERL = "/nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin/perl" | |
| FULLPERL = "/nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin/perl | |
| ABSPERL = $(PERL) | |
| PERLRUN = $(PERL) | |
| FULLPERLRUN = $(FULLPERL) | |
| ABSPERLRUN = $(ABSPERL) | |
| PERLRUNINST = $(PERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" | |
| FULLPERLRUNINST = $(FULLPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" | |
| ABSPERLRUNINST = $(ABSPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" | |
| PERL_CORE = 0 | |
| PERM_DIR = 755 | |
| PERM_RW = 644 | |
| PERM_RWX = 755 | |
| MAKEMAKER = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/ExtUtils/MakeMaker.pm | |
| MM_VERSION = 7.1002 | |
| MM_REVISION = 71002 | |
| # FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle). | |
| # BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle) | |
| # PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar) | |
| # DLBASE = Basename part of dynamic library. May be just equal BASEEXT. | |
| MAKE = make | |
| FULLEXT = NetAddr/IP/Util | |
| BASEEXT = Util | |
| PARENT_NAME = NetAddr::IP | |
| DLBASE = $(BASEEXT) | |
| VERSION_FROM = Util.pm | |
| OBJECT = $(BASEEXT)$(OBJ_EXT) | |
| LDFROM = $(OBJECT) | |
| LINKTYPE = dynamic | |
| BOOTDEP = | |
| # Handy lists of source code files: | |
| XS_FILES = Util.xs | |
| C_FILES = Util.c \ | |
| configure.cc | |
| O_FILES = Util.o \ | |
| configure.o | |
| H_FILES = config.h \ | |
| localconf.h \ | |
| localperl.h | |
| MAN1PODS = | |
| MAN3PODS = Util.pm \ | |
| lib/NetAddr/IP/InetBase.pm \ | |
| lib/NetAddr/IP/UtilPP.pm | |
| # Where is the Config information that we are using/depend on | |
| CONFIGDEP = $(PERL_ARCHLIBDEP)$(DFSEP)Config.pm $(PERL_INCDEP)$(DFSEP)config.h | |
| # Where to build things | |
| INST_LIBDIR = $(INST_LIB)/NetAddr/IP | |
| INST_ARCHLIBDIR = $(INST_ARCHLIB)/NetAddr/IP | |
| INST_AUTODIR = $(INST_LIB)/auto/$(FULLEXT) | |
| INST_ARCHAUTODIR = $(INST_ARCHLIB)/auto/$(FULLEXT) | |
| INST_STATIC = $(INST_ARCHAUTODIR)/$(BASEEXT)$(LIB_EXT) | |
| INST_DYNAMIC = $(INST_ARCHAUTODIR)/$(DLBASE).$(DLEXT) | |
| INST_BOOT = $(INST_ARCHAUTODIR)/$(BASEEXT).bs | |
| # Extra linker info | |
| EXPORT_LIST = | |
| PERL_ARCHIVE = | |
| PERL_ARCHIVEDEP = | |
| PERL_ARCHIVE_AFTER = | |
| TO_INST_PM = Util.pm \ | |
| Util_IS.pm \ | |
| lib/NetAddr/IP/InetBase.pm \ | |
| lib/NetAddr/IP/UtilPP.pm | |
| PM_TO_BLIB = Util.pm \ | |
| $(INST_LIB)/NetAddr/IP/Util.pm \ | |
| Util_IS.pm \ | |
| $(INST_LIB)/NetAddr/IP/Util_IS.pm \ | |
| lib/NetAddr/IP/InetBase.pm \ | |
| ../../blib/lib/NetAddr/IP/InetBase.pm \ | |
| lib/NetAddr/IP/UtilPP.pm \ | |
| ../../blib/lib/NetAddr/IP/UtilPP.pm | |
| # --- MakeMaker platform_constants section: | |
| MM_Unix_VERSION = 7.1002 | |
| PERL_MALLOC_DEF = -DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc -Dfree=Perl_mfree -Drealloc=Perl_realloc -Dcalloc=Perl_calloc | |
| # --- MakeMaker tool_autosplit section: | |
| # Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto | |
| AUTOSPLITFILE = $(ABSPERLRUN) -e 'use AutoSplit; autosplit($$$$ARGV[0], $$$$ARGV[1], 0, 1, 1)' -- | |
| # --- MakeMaker tool_xsubpp section: | |
| XSUBPPDIR = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/ExtUtils | |
| XSUBPP = "$(XSUBPPDIR)$(DFSEP)xsubpp" | |
| XSUBPPRUN = $(PERLRUN) $(XSUBPP) | |
| XSPROTOARG = | |
| XSUBPPDEPS = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/ExtUtils/typemap typemap /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/ExtUtils$(DFSEP)xsubpp | |
| XSUBPPARGS = -typemap "/nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/lib/perl5/5.24.3/ExtUtils/typemap" -typemap "typemap" | |
| XSUBPP_EXTRA_ARGS = | |
| # --- MakeMaker tools_other section: | |
| SHELL = /bin/sh | |
| CHMOD = chmod | |
| CP = cp | |
| MV = mv | |
| NOOP = $(TRUE) | |
| NOECHO = @ | |
| RM_F = rm -f | |
| RM_RF = rm -rf | |
| TEST_F = test -f | |
| TOUCH = touch | |
| UMASK_NULL = umask 0 | |
| DEV_NULL = > /dev/null 2>&1 | |
| MKPATH = $(ABSPERLRUN) -MExtUtils::Command -e 'mkpath' -- | |
| EQUALIZE_TIMESTAMP = $(ABSPERLRUN) -MExtUtils::Command -e 'eqtime' -- | |
| FALSE = false | |
| TRUE = true | |
| ECHO = echo | |
| ECHO_N = echo -n | |
| UNINST = 0 | |
| VERBINST = 0 | |
| MOD_INSTALL = $(ABSPERLRUN) -MExtUtils::Install -e 'install([ from_to => {@ARGV}, verbose => '\''$(VERBINST)'\'', uninstall_shadows => '\''$(UNINST)'\'', dir_mode => '\''$(PERM_DIR)'\'' ]);' -- | |
| DOC_INSTALL = $(ABSPERLRUN) -MExtUtils::Command::MM -e 'perllocal_install' -- | |
| UNINSTALL = $(ABSPERLRUN) -MExtUtils::Command::MM -e 'uninstall' -- | |
| WARN_IF_OLD_PACKLIST = $(ABSPERLRUN) -MExtUtils::Command::MM -e 'warn_if_old_packlist' -- | |
| MACROSTART = | |
| MACROEND = | |
| USEMAKEFILE = -f | |
| FIXIN = $(ABSPERLRUN) -MExtUtils::MY -e 'MY->fixin(shift)' -- | |
| CP_NONEMPTY = $(ABSPERLRUN) -MExtUtils::Command::MM -e 'cp_nonempty' -- | |
| # --- MakeMaker makemakerdflt section: | |
| makemakerdflt : all | |
| $(NOECHO) $(NOOP) | |
| # --- MakeMaker dist section skipped. | |
| # --- MakeMaker macro section: | |
| # --- MakeMaker depend section: | |
| Util.c : localconf.h config.h localperl.h | |
| # --- MakeMaker cflags section: | |
| CCFLAGS = -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/no-such-path/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 | |
| OPTIMIZE = -O2 | |
| PERLTYPE = | |
| MPOLLUTE = | |
| # --- MakeMaker const_loadlibs section: | |
| # NetAddr::IP::Util might depend on some other libraries: | |
| # See ExtUtils::Liblist for details | |
| # | |
| # --- MakeMaker const_cccmd section: | |
| CCCMD = $(CC) -c $(PASTHRU_INC) $(INC) \ | |
| $(CCFLAGS) $(OPTIMIZE) \ | |
| $(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \ | |
| $(XS_DEFINE_VERSION) | |
| # --- MakeMaker post_constants section: | |
| MY_POD2TEXT = /nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin/pod2text | |
| # --- MakeMaker pasthru section: | |
| PASTHRU = LIBPERL_A="$(LIBPERL_A)"\ | |
| LINKTYPE="$(LINKTYPE)"\ | |
| OPTIMIZE="$(OPTIMIZE)"\ | |
| PREFIX="$(PREFIX)" | |
| # --- MakeMaker special_targets section: | |
| .SUFFIXES : .xs .c .C .cpp .i .s .cxx .cc $(OBJ_EXT) | |
| .PHONY: all config static dynamic test linkext manifest blibdirs clean realclean disttest distdir | |
| # --- MakeMaker c_o section: | |
| .c.i: | |
| cc -E -c $(PASTHRU_INC) $(INC) \ | |
| $(CCFLAGS) $(OPTIMIZE) \ | |
| $(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \ | |
| $(XS_DEFINE_VERSION) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c > $*.i | |
| .c.s: | |
| $(CCCMD) -S $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c | |
| .c$(OBJ_EXT): | |
| $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c | |
| .cpp$(OBJ_EXT): | |
| $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cpp | |
| .cxx$(OBJ_EXT): | |
| $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cxx | |
| .cc$(OBJ_EXT): | |
| $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cc | |
| .C$(OBJ_EXT): | |
| $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.C | |
| # --- MakeMaker xs_c section: | |
| .xs.c: | |
| $(XSUBPPRUN) $(XSPROTOARG) $(XSUBPPARGS) $(XSUBPP_EXTRA_ARGS) $*.xs > $*.xsc && $(MV) $*.xsc $*.c | |
| # --- MakeMaker xs_o section: | |
| .xs$(OBJ_EXT): | |
| $(XSUBPPRUN) $(XSPROTOARG) $(XSUBPPARGS) $*.xs > $*.xsc && $(MV) $*.xsc $*.c | |
| $(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c | |
| # --- MakeMaker top_targets section: | |
| config :: config.h | |
| @$(NOOP) | |
| config.h : | |
| $(SHELL) configure | |
| all :: pure_all manifypods | |
| $(NOECHO) $(NOOP) | |
| pure_all :: config pm_to_blib subdirs linkext README | |
| $(NOECHO) $(NOOP) | |
| subdirs :: $(MYEXTLIB) | |
| $(NOECHO) $(NOOP) | |
| config :: $(FIRST_MAKEFILE) blibdirs | |
| $(NOECHO) $(NOOP) | |
| $(O_FILES): $(H_FILES) | |
| help : | |
| perldoc ExtUtils::MakeMaker | |
| # --- MakeMaker blibdirs section: | |
| blibdirs : $(INST_LIBDIR)$(DFSEP).exists $(INST_ARCHLIB)$(DFSEP).exists $(INST_AUTODIR)$(DFSEP).exists $(INST_ARCHAUTODIR)$(DFSEP).exists $(INST_BIN)$(DFSEP).exists $(INST_SCRIPT)$(DFSEP).exists $(INST_MAN1DIR)$(DFSEP).exists $(INST_MAN3DIR)$(DFSEP).exists | |
| $(NOECHO) $(NOOP) | |
| # Backwards compat with 6.18 through 6.25 | |
| blibdirs.ts : blibdirs | |
| $(NOECHO) $(NOOP) | |
| $(INST_LIBDIR)$(DFSEP).exists :: Makefile.PL | |
| $(NOECHO) $(MKPATH) $(INST_LIBDIR) | |
| $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_LIBDIR) | |
| $(NOECHO) $(TOUCH) $(INST_LIBDIR)$(DFSEP).exists | |
| $(INST_ARCHLIB)$(DFSEP).exists :: Makefile.PL | |
| $(NOECHO) $(MKPATH) $(INST_ARCHLIB) | |
| $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_ARCHLIB) | |
| $(NOECHO) $(TOUCH) $(INST_ARCHLIB)$(DFSEP).exists | |
| $(INST_AUTODIR)$(DFSEP).exists :: Makefile.PL | |
| $(NOECHO) $(MKPATH) $(INST_AUTODIR) | |
| $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_AUTODIR) | |
| $(NOECHO) $(TOUCH) $(INST_AUTODIR)$(DFSEP).exists | |
| $(INST_ARCHAUTODIR)$(DFSEP).exists :: Makefile.PL | |
| $(NOECHO) $(MKPATH) $(INST_ARCHAUTODIR) | |
| $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_ARCHAUTODIR) | |
| $(NOECHO) $(TOUCH) $(INST_ARCHAUTODIR)$(DFSEP).exists | |
| $(INST_BIN)$(DFSEP).exists :: Makefile.PL | |
| $(NOECHO) $(MKPATH) $(INST_BIN) | |
| $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_BIN) | |
| $(NOECHO) $(TOUCH) $(INST_BIN)$(DFSEP).exists | |
| $(INST_SCRIPT)$(DFSEP).exists :: Makefile.PL | |
| $(NOECHO) $(MKPATH) $(INST_SCRIPT) | |
| $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_SCRIPT) | |
| $(NOECHO) $(TOUCH) $(INST_SCRIPT)$(DFSEP).exists | |
| $(INST_MAN1DIR)$(DFSEP).exists :: Makefile.PL | |
| $(NOECHO) $(MKPATH) $(INST_MAN1DIR) | |
| $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_MAN1DIR) | |
| $(NOECHO) $(TOUCH) $(INST_MAN1DIR)$(DFSEP).exists | |
| $(INST_MAN3DIR)$(DFSEP).exists :: Makefile.PL | |
| $(NOECHO) $(MKPATH) $(INST_MAN3DIR) | |
| $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_MAN3DIR) | |
| $(NOECHO) $(TOUCH) $(INST_MAN3DIR)$(DFSEP).exists | |
| # --- MakeMaker linkext section: | |
| linkext :: $(LINKTYPE) | |
| $(NOECHO) $(NOOP) | |
| # --- MakeMaker dlsyms section: | |
| # --- MakeMaker dynamic_bs section: | |
| BOOTSTRAP = $(BASEEXT).bs | |
| # As Mkbootstrap might not write a file (if none is required) | |
| # we use touch to prevent make continually trying to remake it. | |
| # The DynaLoader only reads a non-empty file. | |
| $(BOOTSTRAP) : $(FIRST_MAKEFILE) $(BOOTDEP) $(INST_ARCHAUTODIR)$(DFSEP).exists | |
| $(NOECHO) $(ECHO) "Running Mkbootstrap for $(NAME) ($(BSLOADLIBS))" | |
| $(NOECHO) $(PERLRUN) \ | |
| "-MExtUtils::Mkbootstrap" \ | |
| -e "Mkbootstrap('$(BASEEXT)','$(BSLOADLIBS)');" | |
| $(NOECHO) $(TOUCH) "$@" | |
| $(CHMOD) $(PERM_RW) "$@" | |
| # --- MakeMaker dynamic section: | |
| dynamic :: $(FIRST_MAKEFILE) $(BOOTSTRAP) $(INST_DYNAMIC) | |
| $(NOECHO) $(NOOP) | |
| # --- MakeMaker dynamic_lib section: | |
| # This section creates the dynamically loadable $(INST_DYNAMIC) | |
| # from $(OBJECT) and possibly $(MYEXTLIB). | |
| ARMAYBE = : | |
| OTHERLDFLAGS = | |
| INST_DYNAMIC_DEP = | |
| INST_DYNAMIC_FIX = | |
| $(INST_DYNAMIC): $(OBJECT) $(MYEXTLIB) $(INST_ARCHAUTODIR)$(DFSEP).exists $(EXPORT_LIST) $(PERL_ARCHIVEDEP) $(PERL_ARCHIVE_AFTER) $(INST_DYNAMIC_DEP) | |
| $(RM_F) $@ | |
| $(LD) $(LDDLFLAGS) $(LDFROM) $(OTHERLDFLAGS) -o $@ $(MYEXTLIB) \ | |
| $(PERL_ARCHIVE) $(LDLOADLIBS) $(PERL_ARCHIVE_AFTER) $(EXPORT_LIST) \ | |
| $(INST_DYNAMIC_FIX) | |
| $(CHMOD) $(PERM_RWX) $@ | |
| $(NOECHO) $(RM_RF) $(BOOTSTRAP) | |
| - $(CP_NONEMPTY) $(BOOTSTRAP) $(INST_BOOT) $(PERM_RW) | |
| # --- MakeMaker static section: | |
| ## $(INST_PM) has been moved to the all: target. | |
| ## It remains here for awhile to allow for old usage: "make static" | |
| static :: $(FIRST_MAKEFILE) $(INST_STATIC) | |
| $(NOECHO) $(NOOP) | |
| # --- MakeMaker static_lib section: | |
| $(INST_STATIC) : $(OBJECT) $(MYEXTLIB) $(INST_ARCHAUTODIR)$(DFSEP).exists | |
| $(RM_RF) $@ | |
| $(AR) $(AR_STATIC_ARGS) $@ $(OBJECT) && $(RANLIB) $@ | |
| $(CHMOD) $(PERM_RWX) $@ | |
| $(NOECHO) $(ECHO) "$(EXTRALIBS)" > "$(INST_ARCHAUTODIR)/extralibs.ld" | |
| # --- MakeMaker manifypods section: | |
| POD2MAN_EXE = $(PERLRUN) "-MExtUtils::Command::MM" -e pod2man "--" | |
| POD2MAN = $(POD2MAN_EXE) | |
| manifypods : pure_all \ | |
| Util.pm \ | |
| lib/NetAddr/IP/InetBase.pm \ | |
| lib/NetAddr/IP/UtilPP.pm | |
| $(NOECHO) $(POD2MAN) --section=3 --perm_rw=$(PERM_RW) -u \ | |
| Util.pm $(INST_MAN3DIR)/NetAddr::IP::Util.$(MAN3EXT) \ | |
| lib/NetAddr/IP/InetBase.pm $(INST_MAN3DIR)/NetAddr::IP::InetBase.$(MAN3EXT) \ | |
| lib/NetAddr/IP/UtilPP.pm $(INST_MAN3DIR)/NetAddr::IP::UtilPP.$(MAN3EXT) | |
| # --- MakeMaker processPL section: | |
| # --- MakeMaker installbin section: | |
| # --- MakeMaker subdirs section: | |
| # none | |
| # --- MakeMaker clean_subdirs section: | |
| clean_subdirs : | |
| $(NOECHO) $(NOOP) | |
| # --- MakeMaker clean section: | |
| # Delete temporary files but do not touch installed files. We don't delete | |
| # the Makefile here so a later make realclean still has a makefile to use. | |
| clean :: clean_subdirs | |
| - $(RM_F) \ | |
| $(BASEEXT).bso $(BASEEXT).def \ | |
| $(BASEEXT).exp $(BASEEXT).x \ | |
| $(BOOTSTRAP) $(INST_ARCHAUTODIR)/extralibs.all \ | |
| $(INST_ARCHAUTODIR)/extralibs.ld $(MAKE_APERL_FILE) \ | |
| *$(LIB_EXT) *$(OBJ_EXT) \ | |
| *perl.core MYMETA.json \ | |
| MYMETA.yml Util.c \ | |
| blibdirs.ts core \ | |
| core.*perl.*.? core.[0-9] \ | |
| core.[0-9][0-9] core.[0-9][0-9][0-9] \ | |
| core.[0-9][0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9][0-9] \ | |
| lib$(BASEEXT).def mon.out \ | |
| perl perl$(EXE_EXT) \ | |
| perl.exe perlmain.c \ | |
| pm_to_blib pm_to_blib.ts \ | |
| so_locations tmon.out | |
| - $(RM_RF) \ | |
| *.bs *.c \ | |
| *.o *~ \ | |
| Util_IS.pm auto* \ | |
| blib localperl.h \ | |
| tmp* | |
| $(NOECHO) $(RM_F) $(MAKEFILE_OLD) | |
| - $(MV) $(FIRST_MAKEFILE) $(MAKEFILE_OLD) $(DEV_NULL) | |
| # --- MakeMaker realclean_subdirs section: | |
| realclean_subdirs : | |
| $(NOECHO) $(NOOP) | |
| # --- MakeMaker realclean section: | |
| # Delete temporary files (via clean) and also delete dist files | |
| realclean purge :: clean realclean_subdirs | |
| - $(RM_F) \ | |
| $(FIRST_MAKEFILE) $(MAKEFILE_OLD) \ | |
| $(OBJECT) | |
| - $(RM_RF) \ | |
| config.log config.h \ | |
| $(DISTVNAME) config.status | |
| # --- MakeMaker metafile section: | |
| metafile : create_distdir | |
| $(NOECHO) $(ECHO) Generating META.yml | |
| $(NOECHO) $(ECHO) '---' > META_new.yml | |
| $(NOECHO) $(ECHO) 'abstract: unknown' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'author:' >> META_new.yml | |
| $(NOECHO) $(ECHO) ' - unknown' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'build_requires:' >> META_new.yml | |
| $(NOECHO) $(ECHO) ' ExtUtils::MakeMaker: '\''0'\''' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'configure_requires:' >> META_new.yml | |
| $(NOECHO) $(ECHO) ' ExtUtils::MakeMaker: '\''0'\''' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'dynamic_config: 1' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'generated_by: '\''ExtUtils::MakeMaker version 7.1002, CPAN::Meta::Converter version 2.150005'\''' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'license: unknown' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'meta-spec:' >> META_new.yml | |
| $(NOECHO) $(ECHO) ' url: http://module-build.sourceforge.net/META-spec-v1.4.html' >> META_new.yml | |
| $(NOECHO) $(ECHO) ' version: '\''1.4'\''' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'name: NetAddr-IP-Util' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'no_index:' >> META_new.yml | |
| $(NOECHO) $(ECHO) ' directory:' >> META_new.yml | |
| $(NOECHO) $(ECHO) ' - t' >> META_new.yml | |
| $(NOECHO) $(ECHO) ' - inc' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'requires: {}' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'version: '\''1.53'\''' >> META_new.yml | |
| $(NOECHO) $(ECHO) 'x_serialization_backend: '\''CPAN::Meta::YAML version 0.018'\''' >> META_new.yml | |
| -$(NOECHO) $(MV) META_new.yml $(DISTVNAME)/META.yml | |
| $(NOECHO) $(ECHO) Generating META.json | |
| $(NOECHO) $(ECHO) '{' > META_new.json | |
| $(NOECHO) $(ECHO) ' "abstract" : "unknown",' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "author" : [' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "unknown"' >> META_new.json | |
| $(NOECHO) $(ECHO) ' ],' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "dynamic_config" : 1,' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "generated_by" : "ExtUtils::MakeMaker version 7.1002, CPAN::Meta::Converter version 2.150005",' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "license" : [' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "unknown"' >> META_new.json | |
| $(NOECHO) $(ECHO) ' ],' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "meta-spec" : {' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "url" : "http://search.cpan.org/perldoc?CPAN::Meta::Spec",' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "version" : "2"' >> META_new.json | |
| $(NOECHO) $(ECHO) ' },' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "name" : "NetAddr-IP-Util",' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "no_index" : {' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "directory" : [' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "t",' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "inc"' >> META_new.json | |
| $(NOECHO) $(ECHO) ' ]' >> META_new.json | |
| $(NOECHO) $(ECHO) ' },' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "prereqs" : {' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "build" : {' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "requires" : {' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "ExtUtils::MakeMaker" : "0"' >> META_new.json | |
| $(NOECHO) $(ECHO) ' }' >> META_new.json | |
| $(NOECHO) $(ECHO) ' },' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "configure" : {' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "requires" : {' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "ExtUtils::MakeMaker" : "0"' >> META_new.json | |
| $(NOECHO) $(ECHO) ' }' >> META_new.json | |
| $(NOECHO) $(ECHO) ' },' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "runtime" : {' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "requires" : {}' >> META_new.json | |
| $(NOECHO) $(ECHO) ' }' >> META_new.json | |
| $(NOECHO) $(ECHO) ' },' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "release_status" : "stable",' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "version" : "1.53",' >> META_new.json | |
| $(NOECHO) $(ECHO) ' "x_serialization_backend" : "JSON::PP version 2.27300_01"' >> META_new.json | |
| $(NOECHO) $(ECHO) '}' >> META_new.json | |
| -$(NOECHO) $(MV) META_new.json $(DISTVNAME)/META.json | |
| # --- MakeMaker signature section: | |
| signature : | |
| cpansign -s | |
| # --- MakeMaker dist_basics section skipped. | |
| # --- MakeMaker dist_core section skipped. | |
| # --- MakeMaker distdir section skipped. | |
| # --- MakeMaker dist_test section skipped. | |
| # --- MakeMaker dist_ci section skipped. | |
| # --- MakeMaker distmeta section: | |
| distmeta : create_distdir metafile | |
| $(NOECHO) cd $(DISTVNAME) && $(ABSPERLRUN) -MExtUtils::Manifest=maniadd -e 'exit unless -e q{META.yml};' \ | |
| -e 'eval { maniadd({q{META.yml} => q{Module YAML meta-data (added by MakeMaker)}}) }' \ | |
| -e ' or print "Could not add META.yml to MANIFEST: $$$${'\''@'\''}\n"' -- | |
| $(NOECHO) cd $(DISTVNAME) && $(ABSPERLRUN) -MExtUtils::Manifest=maniadd -e 'exit unless -f q{META.json};' \ | |
| -e 'eval { maniadd({q{META.json} => q{Module JSON meta-data (added by MakeMaker)}}) }' \ | |
| -e ' or print "Could not add META.json to MANIFEST: $$$${'\''@'\''}\n"' -- | |
| # --- MakeMaker distsignature section: | |
| distsignature : distmeta | |
| $(NOECHO) cd $(DISTVNAME) && $(ABSPERLRUN) -MExtUtils::Manifest=maniadd -e 'eval { maniadd({q{SIGNATURE} => q{Public-key signature (added by MakeMaker)}}) }' \ | |
| -e ' or print "Could not add SIGNATURE to MANIFEST: $$$${'\''@'\''}\n"' -- | |
| $(NOECHO) cd $(DISTVNAME) && $(TOUCH) SIGNATURE | |
| cd $(DISTVNAME) && cpansign -s | |
| # --- MakeMaker install section skipped. | |
| # --- MakeMaker force section: | |
| # Phony target to force checking subdirectories. | |
| FORCE : | |
| $(NOECHO) $(NOOP) | |
| # --- MakeMaker perldepend section: | |
| PERL_HDRS = \ | |
| $(PERL_INCDEP)/EXTERN.h \ | |
| $(PERL_INCDEP)/INTERN.h \ | |
| $(PERL_INCDEP)/XSUB.h \ | |
| $(PERL_INCDEP)/av.h \ | |
| $(PERL_INCDEP)/bitcount.h \ | |
| $(PERL_INCDEP)/charclass_invlists.h \ | |
| $(PERL_INCDEP)/config.h \ | |
| $(PERL_INCDEP)/cop.h \ | |
| $(PERL_INCDEP)/cv.h \ | |
| $(PERL_INCDEP)/dosish.h \ | |
| $(PERL_INCDEP)/dquote_inline.h \ | |
| $(PERL_INCDEP)/ebcdic_tables.h \ | |
| $(PERL_INCDEP)/embed.h \ | |
| $(PERL_INCDEP)/embedvar.h \ | |
| $(PERL_INCDEP)/fakesdio.h \ | |
| $(PERL_INCDEP)/feature.h \ | |
| $(PERL_INCDEP)/form.h \ | |
| $(PERL_INCDEP)/git_version.h \ | |
| $(PERL_INCDEP)/gv.h \ | |
| $(PERL_INCDEP)/handy.h \ | |
| $(PERL_INCDEP)/hv.h \ | |
| $(PERL_INCDEP)/hv_func.h \ | |
| $(PERL_INCDEP)/inline.h \ | |
| $(PERL_INCDEP)/intrpvar.h \ | |
| $(PERL_INCDEP)/invlist_inline.h \ | |
| $(PERL_INCDEP)/iperlsys.h \ | |
| $(PERL_INCDEP)/keywords.h \ | |
| $(PERL_INCDEP)/l1_char_class_tab.h \ | |
| $(PERL_INCDEP)/malloc_ctl.h \ | |
| $(PERL_INCDEP)/metaconfig.h \ | |
| $(PERL_INCDEP)/mg.h \ | |
| $(PERL_INCDEP)/mg_data.h \ | |
| $(PERL_INCDEP)/mg_raw.h \ | |
| $(PERL_INCDEP)/mg_vtable.h \ | |
| $(PERL_INCDEP)/mydtrace.h \ | |
| $(PERL_INCDEP)/nostdio.h \ | |
| $(PERL_INCDEP)/op.h \ | |
| $(PERL_INCDEP)/op_reg_common.h \ | |
| $(PERL_INCDEP)/opcode.h \ | |
| $(PERL_INCDEP)/opnames.h \ | |
| $(PERL_INCDEP)/overload.h \ | |
| $(PERL_INCDEP)/pad.h \ | |
| $(PERL_INCDEP)/parser.h \ | |
| $(PERL_INCDEP)/patchlevel.h \ | |
| $(PERL_INCDEP)/perl.h \ | |
| $(PERL_INCDEP)/perlapi.h \ | |
| $(PERL_INCDEP)/perlio.h \ | |
| $(PERL_INCDEP)/perliol.h \ | |
| $(PERL_INCDEP)/perlsdio.h \ | |
| $(PERL_INCDEP)/perlvars.h \ | |
| $(PERL_INCDEP)/perly.h \ | |
| $(PERL_INCDEP)/pp.h \ | |
| $(PERL_INCDEP)/pp_proto.h \ | |
| $(PERL_INCDEP)/proto.h \ | |
| $(PERL_INCDEP)/reentr.h \ | |
| $(PERL_INCDEP)/regcharclass.h \ | |
| $(PERL_INCDEP)/regcomp.h \ | |
| $(PERL_INCDEP)/regexp.h \ | |
| $(PERL_INCDEP)/regnodes.h \ | |
| $(PERL_INCDEP)/scope.h \ | |
| $(PERL_INCDEP)/sv.h \ | |
| $(PERL_INCDEP)/thread.h \ | |
| $(PERL_INCDEP)/time64.h \ | |
| $(PERL_INCDEP)/time64_config.h \ | |
| $(PERL_INCDEP)/uconfig.h \ | |
| $(PERL_INCDEP)/unicode_constants.h \ | |
| $(PERL_INCDEP)/unixish.h \ | |
| $(PERL_INCDEP)/utf8.h \ | |
| $(PERL_INCDEP)/utfebcdic.h \ | |
| $(PERL_INCDEP)/util.h \ | |
| $(PERL_INCDEP)/uudmap.h \ | |
| $(PERL_INCDEP)/vutil.h \ | |
| $(PERL_INCDEP)/warnings.h | |
| $(OBJECT) : $(PERL_HDRS) | |
| Util.c : $(XSUBPPDEPS) | |
| # --- MakeMaker makefile section: | |
| $(OBJECT) : $(FIRST_MAKEFILE) | |
| # We take a very conservative approach here, but it's worth it. | |
| # We move Makefile to Makefile.old here to avoid gnu make looping. | |
| $(FIRST_MAKEFILE) : Makefile.PL $(CONFIGDEP) | |
| $(NOECHO) $(ECHO) "Makefile out-of-date with respect to $?" | |
| $(NOECHO) $(ECHO) "Cleaning current config before rebuilding Makefile..." | |
| -$(NOECHO) $(RM_F) $(MAKEFILE_OLD) | |
| -$(NOECHO) $(MV) $(FIRST_MAKEFILE) $(MAKEFILE_OLD) | |
| - $(MAKE) $(USEMAKEFILE) $(MAKEFILE_OLD) clean $(DEV_NULL) | |
| $(PERLRUN) Makefile.PL "PREFIX=/nix/store/gzbb4v0qg5vdfd3gpcjkyf4prkfzrhna-perl-NetAddr-IP-4.079" "INSTALLDIRS=site" "PERL=/nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin/perl" "FULLPERL=/nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin/perl" | |
| $(NOECHO) $(ECHO) "==> Your Makefile has been rebuilt. <==" | |
| $(NOECHO) $(ECHO) "==> Please rerun the $(MAKE) command. <==" | |
| $(FALSE) | |
| # --- MakeMaker staticmake section: | |
| # --- MakeMaker makeaperl section --- | |
| MAP_TARGET = ../../perl | |
| FULLPERL = "/nix/store/ggb7k5x9855j10dz99467djx4rplg32b-perl-5.24.3/bin/perl | |
| # --- MakeMaker test section: | |
| TEST_VERBOSE=0 | |
| TEST_TYPE=test_$(LINKTYPE) | |
| TEST_FILE = test.pl | |
| TEST_FILES = t/*.t | |
| TESTDB_SW = -d | |
| testdb :: testdb_$(LINKTYPE) | |
| test :: $(TEST_TYPE) subdirs-test | |
| subdirs-test :: | |
| $(NOECHO) $(NOOP) | |
| test_dynamic :: pure_all | |
| PERL_DL_NONLAZY=1 $(FULLPERLRUN) "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness($(TEST_VERBOSE), '$(INST_LIB)', '$(INST_ARCHLIB)')" $(TEST_FILES) | |
| testdb_dynamic :: pure_all | |
| PERL_DL_NONLAZY=1 $(FULLPERLRUN) $(TESTDB_SW) "-I$(INST_LIB)" "-I$(INST_ARCHLIB)" $(TEST_FILE) | |
| test_ : test_dynamic | |
| test_static :: pure_all $(MAP_TARGET) | |
| PERL_DL_NONLAZY=1 ./$(MAP_TARGET) "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness($(TEST_VERBOSE), '$(INST_LIB)', '$(INST_ARCHLIB)')" $(TEST_FILES) | |
| testdb_static :: pure_all $(MAP_TARGET) | |
| PERL_DL_NONLAZY=1 ./$(MAP_TARGET) $(TESTDB_SW) "-I$(INST_LIB)" "-I$(INST_ARCHLIB)" $(TEST_FILE) | |
| # --- MakeMaker ppd section: | |
| # Creates a PPD (Perl Package Description) for a binary distribution. | |
| ppd : | |
| $(NOECHO) $(ECHO) '<SOFTPKG NAME="$(DISTNAME)" VERSION="$(VERSION)">' > $(DISTNAME).ppd | |
| $(NOECHO) $(ECHO) ' <ABSTRACT></ABSTRACT>' >> $(DISTNAME).ppd | |
| $(NOECHO) $(ECHO) ' <AUTHOR></AUTHOR>' >> $(DISTNAME).ppd | |
| $(NOECHO) $(ECHO) ' <IMPLEMENTATION>' >> $(DISTNAME).ppd | |
| $(NOECHO) $(ECHO) ' <ARCHITECTURE NAME="x86_64-linux-thread-multi-5.24" />' >> $(DISTNAME).ppd | |
| $(NOECHO) $(ECHO) ' <CODEBASE HREF="" />' >> $(DISTNAME).ppd | |
| $(NOECHO) $(ECHO) ' </IMPLEMENTATION>' >> $(DISTNAME).ppd | |
| $(NOECHO) $(ECHO) '</SOFTPKG>' >> $(DISTNAME).ppd | |
| # --- MakeMaker pm_to_blib section: | |
| pm_to_blib : $(FIRST_MAKEFILE) $(TO_INST_PM) | |
| $(NOECHO) $(ABSPERLRUN) -MExtUtils::Install -e 'pm_to_blib({@ARGV}, '\''$(INST_LIB)/auto'\'', q[$(PM_FILTER)], '\''$(PERM_DIR)'\'')' -- \ | |
| Util.pm $(INST_LIB)/NetAddr/IP/Util.pm \ | |
| Util_IS.pm $(INST_LIB)/NetAddr/IP/Util_IS.pm \ | |
| lib/NetAddr/IP/InetBase.pm ../../blib/lib/NetAddr/IP/InetBase.pm \ | |
| lib/NetAddr/IP/UtilPP.pm ../../blib/lib/NetAddr/IP/UtilPP.pm | |
| $(NOECHO) $(TOUCH) pm_to_blib | |
| # --- MakeMaker selfdocument section: | |
| # --- MakeMaker postamble section: | |
| README : Util.pm | |
| @$(MY_POD2TEXT) Util.pm > README | |
| # End. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment